Finder: replace a file with another file

Let's say I want a game to play my favorite song when the game is supposed to be playing its own theme song. The theme song is in a sound file that is located on my computer's hard drive. The theme song sound file is in the same format as the sound file that contains my favorite song, so I don't need to convert any files. What is the easiest way to make the game think that the sound file I want the game to use is the sound file of the theme song?

You could hack the software and change the code to use some other file, but that will not be easier.
Either change the code or change the target. Unless the game provides a preference to change the sound, there isn’t another option.

Similar Messages

I had two files named graphics and I replaced one graphics file with another which was the wrong one. Can I undo my replacement? I move the wrong one, which was on my desktop into another one and that is when it as me if I wanted to replace the file.

I accidently replaced a file with another. Can I undo my action?
I had two files named graphics. One was on my desktop and another was within another file called solitarie. I move the one on my desktop (wrong file) into the solitarie file and was asked if I wanted to replace the graphics file in the solitarie folder (the correct one). I said yes accidently and then remembered that I had made a mistake. If I use undo, it only move the wrong file back to the desktop. Is there an undo of replace?

Sorry, but's that's why you get the warning. "Replace" means just that - the new file over-writes the old one. There is no undo.

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

Replace a string with another string in a file

I have to replace a string with another string. Say for example in a html file it got a line like,
<a href="##"></a>
now i want to replace this ## with the full derived path like
"c;\\sample folder\\sample subfolder\\samplefile.html"
can someone help me to do this?
pls tell me from the file opening till closing the file.

I have to replace a string with another string. Say
for example in a html file it got a line like,
<a href="##"></a>
now i want to replace this ## with the full derived
path like
"c;\\sample folder\\samplesubfolder\\samplefile.html"
can someone help me to do this?
pls tell me from the file opening till closing the
file.
public class Buckel {
final static String CONST = "c:\\sample folder\\samplesubfolder\\samplefile.html";
public Buckel() {
public static void main ( String[] argv ) throws Exception {
    int    idx = 0;
    String in = "<a href=\"##\"></a>",   // We'll imagine this just gets here somehow. If it's on the i/p file then take the '\' out B4 and aft the '##'.
           out = "";
    idx = in.indexOf( "##" );
    if ( idx > 0 ) {
      out = in.substring( 0, idx ) + CONST + in.substring( idx+=2, in.length() );
    System.out.println( out );
}

In Pages how do I save a file with another name

In Pages how do I save a file with another name?

I don't know if there is a less cumbersome way to do this (I'm still pretty new to Lion) but This is what I do - since "Save As" seems to be gone with Lion.
I create a duplicate document - then click the red button to close the document - and a dialog box pops up and asks if you want to save the changes - I change the name in there and then save the file under the new name.
You can also save the copy to the desktop - get info - and then change the name if the finder window.
I copied this from the Pages help area. These help instructions were created pre-Lion I'm sure.
Saving a Copy of a Document
If you want to make a copy of your document—to create a backup copy or multiple versions, for example—you can save the document using a different name or location. (You can also automate saving a backup version, as Automatically Saving a Backup Version of a Document describes.)
To save a copy of a document:
Choose File > Save As and specify a name and location.
The document with the new name remains open. To work with the previous version, choose File > Open Recent and choose the previous version from the submenu.

Trying to drop files onto a droplet that is already in progress with another file.

I'm trying to find a way to drop a file on a droplet and before the action of that droplet finishes, drop another file on the droplet and have a queue or some other way of photoshop recognizing and processing the second request once the first has finished. Currently PS CC 2014 just ignores the second file. I think automator must have a way but have been messing around to no avail.

Ah, I see now what you mean, Marc but I don't know an answer.
Maybe you could try and see what happens if you make two or more droplets
(with identical contents but a different name - so you can put them in the
same place). Not sure if this is even possible but maybe worth trying...
Met vriendelijke groeten,
Ronald
2015-03-17 21:16 GMT+01:00 marcimpact <[email protected]>:
Adobe Community <https://forums.adobe.com/?et=watches.email.thread> Trying
to drop files onto a droplet that is already in progress with another file.
reply from marcimpact
<https://forums.adobe.com/people/marcimpact?et=watches.email.thread> in *Photoshop
General Discussion* - View the full discussion
<https://forums.adobe.com/message/7309203?et=watches.email.thread#7309203>

No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.

There is no 'Save as' under the file menu. How do I save a file with another name?

Numbers help refers to the 'Save As' function in the File menu. My version (latest) does not have a 'Save As' function. How do I save a file with another name?

Ross Millard wrote:
Badunit. You have an original file and an edited file. Now you duplicate the edited file and save it with a different name. Now do you have to go and delete the changed file from which the duplicate had been made? And.... is the original still unchaned... still original?
Ross,
For the situation you describe, Apple has provided Duplicate and Revert. Use File > Duplicate to reach this menu:
Regards,
Jerry

You already have a schema opened on this file with another name: abc

I am trying to create a model for an XML file, when I clicked on "Objects to Reverse" checkbox under "Selective Reverse" tab, I am getting the following error:
java.sql.SQLException: You already have a schema opened on this file with another name: abc
I have created a Data Server in Topology whose schema and workschema are "abc" and logicla schema is "Labc".
Where is the mistake going in?

That is because you can only connect to a file in read/write mode once at a time. When you connect to a file without specifying ro=true (e.g. Read Only=true) in the URL, the file is locked and you can’t connect to the file from another instance until the original connection is dropped. I assume since you are trying to connect to the file multiple times that you mean to connect in readonly mode. To do this, like I mentioned earlier, simply add ro=true to your URL and you should be all set. Note: you may need o restart your JVM for chnges to take effect. Let me know if that works.

Comparing the fields of one file to another file

Hi guys,
Is it possible to compare the fields of one file to another file using ABAP?
I have a file extracted from SAP and I want to compare my extracted file to another file using ABAP?
How am I going to do it?
Thanks a lot!
Rgds,
Mark

Mark,
How to read the file from appli. server to internal table:
DATA : v_fpath TYPE salfile-longname VALUE
                               '/data/sapdata/inc/inbox/ppm_maint_plan'.
DATA : BEGIN OF i_records OCCURS 0,
        rec TYPE string ,
      END OF i_records.
DATA : BEGIN OF it_input,
             tplnr LIKE iflot-tplnr,
             stjobno(22),
            date1(10),
            frequency(10),
            sortfield(20),
            ilart LIKE t353i-ilart,
        END OF it_input.
OPEN DATASET v_fpath FOR INPUT IN TEXT MODE.
    DO.
      READ DATASET v_fpath_te INTO i_records-rec .
      IF sy-subrc EQ 0.
          SPLIT i_records-rec AT c_coma INTO it_input-tplnr
                                             it_input-stjobno
                                             it_input-date1
                                             it_input-frequency
                                             it_input-sortfield
                                             it_input-ilart.
          APPEND it_input.
          CLEAR it_input.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
    CLOSE DATASET v_fpath .
Note : it_input is the internal table .If you don't know the columns structure.Declare your internal table (it_input ) fileds as "char" with some length.
Do same thing for another file.
SORT : both internal tables.
LOOP AT it_input.
LOOP AT SECON_internaltable.
    compare the fields here..
ENDLOOP.
ENDLOOP.
Pls. reward if useful....

Can we able to take the out put have the file into another file in unix

Hi all ,
My question is .. we are having one shall fill , we need to take the output of that file to another file ,
but the output is not printing into another file..
what am guessing is we have only read and execute permission on that file.. we don't have write permission on that file and the folder where the file is exists .
my Question is , Do we need all permission on File to copy the output to another file... ?
because we are redirecting the output to another folder where we can create the another file and read and write permissions .
-rwxrwxr-x 1 th th 499 Jun 20 01:06 Coverage
like this we are having the permission on that file
for the folder we are having the permission
drwxrwxr-x 6 kpsmith kpsmith 12288 Aug 9 21:59 1.3
can any one help me out from this problem
Thanks
Sreedhar

Assuming 'shall fil' is shell script , other than dumping even more garbage in this forum, what does this question have to do with Oracle?
Or can't you type anything in the address bar of your browser and is this URL the only one you can visit?
Sybrand Bakker
Senior Oracle DBA

How to replace one variable with another in large number of queries

Hello guys!
I have this situation: our company needs to use one variable instead of another for certain amount of queries.
Is there some way to automatically replace one variable with another for a certain characteristic in big number of queries ( like 150 - 200 ) ? Doing this manually would take lots of time)
Apreciate your help!

you could try (at your own risk) the following:
1. search the technical id (ELTUID) of your variable in table RSZELTDIR
2. see where this variable is used in table RSZELTXREF (by filling RSZELTDIR-ELTUIID in RSZELTXREF-TELTUID)
3. add similar entries for your new variable
4. delete the entries for the old variable (they're part of the key, so you can't simply "change" them)

Replacement Path Variable with Another Variable

Hi,
I am currently trying to create a report that would need me to have the same values for different characteristics (e.g. clearing date, posting date, net due date). I have seen that there is a way in the replacement path variable that would replace its value with another variable that is ready for input. I also looked into SAP help but I can't seem to figure out on how to do it specifically. Does anyone know a step-by-step process on how to do this? How does this work?
Thank you in advance!

take an e.g.
u have characteristic say ch1
u want to restrict it with replacement path variable
first of all create a variable var1
click what it is based upon for e.g. 0calday, 0material etc.
make it user entry variable
select single or multiple entry
make it mandatory
save it and hit okey
click on ch1
right click and say restrict
in new window create a new variable
give its name and technical name
processing path is replacement path
go to next tab of replacement path
select several ooptions
replace variable with another variable
select a variable called var1
change the offset length and offset start with different parameters.
hit okey
this way u have restricted ch1 with replacement path variable var1
now when u run report u have to enter value of var1
which will then further feeded to ch1
this way u can create replacement path variables at lots of instances and then u can always feed the value from var1 at different time
make sure as this ur requirement is date
try to use 0calday as reference infoobject all the times....

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out

Have a look at this it might help
http://support.apple.com/kb/TS4148

How to replace a movieclip with another movieclip

How to replace a movieclip with another movieclip
Hi,
I am having a swf called tchild.swf... in this i got a
movclip 'child1'. i am loading this tchild.swf into another swf
tparent.swf within 'mcloader' movie clip.. i got another movclip
called 'picture1'
i am loading tchild.swf into mcloader movclip.. and i want to
load 'child1' moviclip into picture1..
how to replace a picture1 movieclip with child1 mc..
PS: i dont want to load picture1 from library.. its on the
stage.

AWT or Swing?

Finder: replace a file with another file

Similar Messages

Maybe you are looking for