Finder windows do not update their content for ARD

Server (to which I am connected): MacMini (Late 2012) 10.8.3,
Computers (with whom I am connected): MBP 2008 10.8.3, iMac 2011 10.8.3.
After connecting I open any Finder window and try to select files with the mouse (or Command-A). The window is not updated. If you move the window on the desktop, it is updated. All these actions are performed without the monitor connected to the server.
If you connect an external monitor, so no problem. When connected to the monitor to send the image looks much smoother.
This problem does not occur if the map files in the list view. The problem is present, if the map as icons.
Tried to restart the server - did not help.
Tried to install Combo update 10.8.3 - did not help.
The problem occurred suddenly, it seems after I added the video in iTunes. (That is up to the challenge I did not install any software or not an administrator password).
How to fix it?
Here's a short video: http://www.youtube.com/watch?v=WtG1t6q9eFI
Also there is a server MacMini 2010 (10.6.8) - there are no such problems.

Found an interesting solution, I have not tried it myself yet, I'm waiting resistors
https://discussions.apple.com/message/20678554#20678554
(If the monitor is not connected, the video driver is not loaded.)

Similar Messages

  • Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine.  Do I have to wait for Seagate to update their drivers for this hard drive?

    Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine.  Do I have to wait for Seagate to update their drivers for this hard drive?

    I tried your suggestion, and it's been giving me the message "Preparing for Backup" for the past 8 hours.  Does this mean TM is backing up my hard drive?  I'll give it a few more hours, but if nothing else happens, I'm not sure what else to do.  I'm not sure if there are any new external hard drives that are compatible with ML yet. 

  • Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

    Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

    Bad video card, call Apple, get a case number and return it.

  • Icon view in Finder windows do not autowrap

    I am using 10.5.1 on a 17" MBP 2.16 ghz.
    Since installing Leopard, Icon view in Finder windows do not autowrap and Finder windows do not always remember their display preferences.
    The Trash auto-wraps (the icons spread to take up the entire window if it is enlarged) But Opening a Folder in my default list view and switching to Icon view and then enarging the window only shows icons in the original window width. EG, If it were 3 colums of icons, it stays 3 columns of icons unless I use Clean Up TWICE and then I get 10 columns of icons which will wrap.
    Is this a Leopard BUG or a local problem. Any suggestions on fixing it?
    TIA,
    Bill

    Yeh - though I use cmd-J which I have used since it appeared, 10.1?
    But I just solved my problem. In my use as defaults selection, I had Snap to Grid selected in the arrange by pop-up rather than by Name.
    Selecting Name and clicking on Use as Defaults makes things work as expected.
    Thanks for making me look closely!
    Cheers,
    Bill

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • Approval Workflow does not update the Content Approval status if started automatically

    Hi,
    I’m using a simple Approval Workflow associated with
    Content Approval on site pages. It works fine when I set it to be started manually (by using
    Allow this workflow to be manually started by an authenticated user with Edit Item permissions
     option) and on the completion of the workflow the
    Content Approval status is updated accordingly. But when I set it to be started automatically (by using
    Start this workflow when a new item is created
     / Start this workflow when an item is changed
    options), it does not updates the Content Approval status. Note that I’ve set the
    Update the approval status after the workflow is completed (use this workflow to control content approval)
    option to true.
    Regards

    Hello,
    It is recommended to select "Start this workflow to approve publishing a major version of an item" when you want to use the workflow to manage content approval for
    a library.
    According to the Notes for “Enable Content Approval” option in
    this reference:
    If you are using this Approval workflow to manage content approval (moderation) for a library, and you selected the Start this workflow to approve publishing a major version
    of an item check box on the Add a Workflow page..
    If you did not select the Start this workflow to approve publishing a major version of an item check box on the Add a Workflow page because you do not want this workflow to
    be the default content approval workflow for a library, you can select the Update the approval status (use this workflow to control content approval) check box to make this workflow a secondary content approval workflow that specific users can
    start manually.
    That means having an approval workflow start automatically when a document is changed or created is not a good practice when you want to use the workflow to manage
    content approval for a library. You should either select "Start this workflow to approve publishing a major version of an item" or give users the option to start the workflow manually at the time they want to submit for an approval.
    Thanks & Regards.
    Lily Wu

  • Finder window is not proportioned correctly

    We just updated to Adobe Acrobat DC and it looks like the Finder window is not proportioned correctly.   There is the large grey space that cannot be reduced. If the window is scaled down then you lose the files on the top while the gray space remains the same. We have two computers running Mac 10.10.3 that are doing the same thing. Is anyone else experiencing the same issue?
    What appears when you go to Open...
    Shrinking window does this......

    Hi ,
    Did you try repairing Acrobat DC ?
    If not ,please try the same and see if that helps sorting this issue .
    Or you could also try uninstalling the software and re installing it once and check if that helps in any way .
    And by shrinking do you mean to adjust the screen resolution or is that something else you are trying to perform ?
    Please try both the methods and see if that fixes the issue.
    Regards
    Sukrit Dhingra

  • Windows Could Not Update the Computer's Boot Configuration. Windows Server 2012

    I am trying to install Windows Server 2012. When installing, I get the message Windows Could Not Update the Computer's Boot Configuration. Installation
    cannot proceed. It cancel the installation. Can anyone help me with my problem?

    Hi,
    Any update about the issue?
    Please post more detail information about the issue?
    How did your do the installation? clean install or override install?
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows could not update the computer's boot configuration. via UEFI installation

    I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
    computer's boot configuration, Installation cancelled. 
    I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what. 
    please help.
    raymund r
     

    Hi,
    Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
    Try again to install Windows 8.1 again.
    If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
    Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
    https://discussions.apple.com/thread/5491283?tstart=0
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Kate Li
    TechNet Community Support

  • Windows could not update the computer's boot configuration. Installation cannot proceed.

    HELP!!!
    Windows could not update the computer's boot configuration. Installation cannot proceed.
    The installation then it says "The installation was canceled" and "Any changes to your computer won't be saved.
    I have been trying to sort this out for over 15 hours.
    I have the MacBook Pro (Late 2011)
    Quad Core i7 (Clocked at 2.2GHz)
    4GB Ram
    Radeon Graphics (512mb graphics ram)
    Running OSX Yosemite (10.10.2)

    Did you have to modify Bootcamp Inof.plist to see the USB Installer option?
    Your USB device needs to be a USB2 device. Here is an example.

  • Error ''windows could not update the computer's boot configuration"

    i have an Hp pavilion dv 6 -3045 product wr747ea#abe ,till now i installed windows 7 on it several times but this time after i formated the partition and started the instalation from usb at completing the installation a message popup ''windows could
    not update the computer's boot configuration''.Also i tried with another copy of windows 7 also booted from usb but i get same message at same step. I used a memory stick and bootable windows 7 from usb with Rufus program.
    Please any sugestions ?

    Hi,
    Please make sure you have format the system drive and perform a clean install, not just override or upgrade from the previous system.
    The bootloaders for Windows Vista and Windows 7 are quite similar,  you could have a look at this article and see if it's helpful to you: 
    When I try to upgrade an earlier version of Windows to Windows Vista, I receive an error message: "Windows could not update the computer's boot configuration"
    http://support2.microsoft.com/kb/931697
    Karen Hu
    TechNet Community Support

  • Windows7 will not update it ask for a cd for ofv

    windows 7 will not update it asks for a CD for OFV 

    Hmmm. I might need some more specific information to help answer this for you. Are you trying to upgrade from Windows Vista to Windows 7?
    I am an HP employee.

  • Finder window will not open

    Finder window will not open from the dock unless I right click and click "New Finder Window".  Currently running Yosemite 10.10.3 (14D87p) public beta (iMac - 27" late 2013). 
    Tried the following fixes:
    1.  Deleted finder.plist and restart.
    2.  Force quit Finder - when I do this, I get the "Finder not responding" and have to restart computer and right click for "New Finder Window".
    3.  Perform "disk permission repair".

    Well I'm glad that I"m not the only one with the issue. I'm also running Yosemite 10.10.3. About 2 days ago Finder stopped responding. I have reported it via "Feedback Assistant".
    I did create a new profile and it does open with a new profile. Which is kinda strange. I have also done items 1-3 listed in the original post.
    I will keep an eye on this post to see if anyone solves the issue at hand.

  • HT2311 After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go).  What do I do?

    After waiting 27 minutes while the new iTunes supposedly downloaded onto my computer, the Finder window did not appear, and the iTunes.mpkg icon didn't appear on my desktop (where downloads usually go).  I also looked for the new iTunes by clicking on my Hard Drive icon but didn't see it there either.  I only see the icon for the old iTunes.  What do I do?

    The exclamation mark means that the app has lost the link to the actual file.
    First step: try and make sure the iPhoto Library is working correctly:
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

    I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
    I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
    I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
    Windows 7 and iPad 2
    Kind regards,

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

Maybe you are looking for