Finding Data of a Particular region

Hi,
How do we find the data present of a particular region say "X" in the datatarget for which data of say 4 regions is loaded. I know only the object I need to find the Data targets also in which the particular region data is present.
I need to delete the data of particular region from datatargets can someone let me know how this could be done.
Regards,
Vicky

Hi vicky,
you can delete particular records from a dataprovider. Right-click on your data provider (infocube), choose 'manage' option. goto the 'contents'  tab , you will be able to see the fields in the infocube.select the field you want , and click 'delete selection' option. In the next screen you can select the particular records you want to delete. After selecting the values, you can execute and delete the required records.
Regards,
Krishna.

Similar Messages

  • How to find data base tables for a particular  trancation code

    Dear All,
    Is there any T.code for finding data base tables used in  a particular transaction code(Eg.: MM01).
    Regards,
    Satyapalli

    Hello Satya
    There is a very useful function module available for your requirement:
    <b>RS_PROGRAM_TABLES</b>
    Call this function module using:
    OBJECT_TYPE  = 'TRAN'       " transaction
    OBJECT_NAME = 'VA01'
    " PROGRAM  -> not required
    MONITOR_ACTIVATE = 'X'
    The function module will list you all DB tables touched by the transaction and shows whether they are read or updated (unfortunately, on ECC 5.0 this seems to be no longer the case. All tables are displayed as READ).
    Regards
      Uwe

  • Unable to find data in RSA3 for particular fields2lis_04_p_arbpl datasource

    I am working with datasource 2lis_04_p_arbpl to construct Yield Report. I have a field GAMNG(Target Quantity) in the table AFKO, so I added it to the communication structure and activated it. I also want the field IGMNG(confirmed quantity) which is available in the table AFKO but not appearing in the pool tables of ARBPL datasource, so I have done datasource enhancement and obtained the field in the datasource. When I am checking for the data in RSA3, unable to find data(zero values) for both the fields.
    Edited by: bhagav on Jan 5, 2012 1:20 PM

    Hi ,
    Please make sure that you are doing the extractor check in Update mode 'Full' .If the setup tables are filled then this should pick the data for the 2 newly added fields .
    check and update accordingly later .
    Thanks
    Kamal Mehta

  • How can you find the Last Modified Date of a particular table

    Hi,
    I want to show to the LAST MODIFIED date of a particular table to the user before refreshing the table with new data. Experts please suggest me the way using JDBC-SQL connection.

    There is no generic SQL way for this. It depends completely on the features your DBMS offers. With Oracle you'd need to create column which gets updated in a trigger. I believe MS SQL Server offers a special data type for this, which is updated automatically. I don't know about others.

  • Getting Modified date of a particular document in KM Content

    Hi,
    Can I fetch the modified date of a particular document from KM Content?
    I know  i can find the date in settings -> properties. But I want to fetch the value of modified date/time.
    I want to save that  modified date/time in particular attribute in a program developed in NWDS so that I can proceed with my code depending on modified date/time.
    Please guide me.
    Regards
    Simin

    Belw code snippet gives me the Modified date for the document RFCCall.html stored in documents folder.
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
              IUserContext uc = request.getUser();
              IUser user = (IUser)uc.getUser();
              ResourceContext ctxt = new ResourceContext(user);
              RID rid = RID.getRID("/documents/RFCCall.html");
              IResource resource;
              try {
                   resource = ResourceFactory.getInstance().getResource(rid, ctxt);
                   response.write(resource.getLastModified().toString());
              } catch (ResourceException e) {
                   // TODO Auto-generated catch block
                   e.printStackTrace();
    You need to add a sharing reference to knowledgemanagement for this to work.
    Regards
    Prashant

  • How to find out whether a particular changed by some user

    Hi gurus,
                I am just trying to figure it out how to find out whether a particular user has changed a particular table or not. In other words table changes history. If any of you know about it please let me know.
    Thankyou
    Jason

    Jason,
      Ajay mentioned changes to Table not for Data. If you are looking for Changes to Table Data... you need to check System Log SM21. check for that perticular period.
    Nagesh Ganisetti.
    Assign points if it helps.

  • Finder is very slow, particularly when using network drive

    I have a mid-2011 Macbook Air, OSX 10.9.4, and Finder is extremely slow, particularly when I am navigating my Time Capsule.  First, a little history.
    I have tried the fixes listed in these three threads:
    (1) https://discussions.apple.com/thread/3358265?searchText=finder%20slow
    (2) https://discussions.apple.com/thread/1324280?searchText=Finder%20is%20slow
    (3) https://discussions.apple.com/thread/5495797?start=30&tstart=0
    Second, my Time Capsule is new.  I bought it to replace a WD MyBook that used to work really well, and then something changed.  Unfortunately, I assumed that it was some problem on WD's side, so after a year or two of waiting to see if either WD or Apple issued an update to fix it, I assumed it was some kind of file system incompatibility (or other interoperability problem) that wasn't likely to go away, and just sprung for the Time Capsule.  However, after getting all the files on the Time Capsule, the problem remains.  So here's a rundown of what I experience:
    When I navigate the directories on my Time Capsule, if I haven't been in a particular folder, it takes a very long time to load the contents.  On average, it will be 30 seconds, but it is not uncommon for it to be over a minute.  This can happen even if a folder is empty or has just a few files in it.  In addition, adding a subfolder and trying to rename it takes a very long time.  After renaming a new folder, it can then take another full minute or more for the folder to actually show the newly assigned name and bounce into line in alphabetical order.
    Here are some other observations.  First, my connection is very fast, as I'm directly connected to the Time Capsule (albeit via wireless).  Second, there is clearly something extra going on in Finder that is contributing to this issue, because I navigated to different directories using Terminal and did an "ls" command, and as you would expect, the list fired out virtually instantaneously.  Yet, right after that, if I clicked on that same folder with Finder, it would take a minute or more to display the same file names.
    Could it be that the Finder is doing other things at the same time as it is giving me a list of what is in the directory?  For example, could the Finder be loading ALL metadata for each of the files into some database or index being built on the fly every time I pop into a new folder, even if I'm not using a view mode where I am asking to see those other bits of metadata?  If so, that might make sense as I generally am using the network drive to navigate directories of my photographs, and they have a lot more categories of metadata associated with them than do Word docs and PDFs (e.g., date of picture, time of picture, aperture, shutter speed, exposure, etc.).  Or, perhaps is Finder trying to load previews of ALL of the files whenever a directory request is made, so that bouncing through the previews takes less time?  I sort of doubt that, because even after a directory listing finally comes up, it seems to churn a bit on each photo before the preview comes up, which I take as an indication that it's creating each preview only after a request is made for that particular file.  Either way, I will say that in old WinXP and even in the newer Windows 7, if you want to view files in a Detailed setting where you can see other metadata (called "Attributes"), it definitely prioritizes giving you a directory listing, and then continues filling in the various selected Attributes one-by-one after that.  Thus, if you want to sort by the date a photograph was taken (as opposed to its modified or created date, which seem to be default attributes that load as quickly (or nearly as quickly) as the filename), or by the photo's dimensions, it might take a few minutes to load in those attributes for a folder of a couple thousand pictures.  But, critically, if you are not planning on using those attributes, but rather, merely want to see how many files you have in that folder, or select them all and load them into a photo viewer, you won't have to wait for the file system to load the file attributes before you get a listing of the folder's contents.  It seems to me like the Finder, however, might actually be forcing you to wait until it has loaded all of those attributes.
    Does the foregoing sound like a plausible explanation of the problem to those out there with knowledge of how Finder actually works?  And if so, does that bring to mind any potential settings that could be turned off or any other work-arounds (since those I've tried have not fixed the issue)?
    If anyone has other ideas, I am all ears.  I am pretty annoyed that I sunk time into switching over to a Time Capsule on the assumption that Apple couldn't have had a bug this bad, only to find out that I was wrong.  The biggest irony is that my old WinXP computer used to rip through the folder structures with ease on the MyBook, but my fully updated Air is practically crippled by the same task.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Find data same kind in Oracle dBase SQL

    Hello all
    I'm working on a project were i need to find data that are cross referencing in between them (Redundant data).
    I explain:
    I have this SQL that i use all the time to extract trailer per carrier ID:
    SELECT NULL,
         NULL,
         TRC.TL_RESOURCE_ID,
         TRC.CARRIER_ID,
         TRC.PERIOD,
         TRC.MAX_LOADS,
         TRC.CONTRACT_MAX_TEAMS,
         TRC.CURRENT_MAX_TEAMS,
         TRC.PERCENT_COMMIT,
         L.NAME,
         R.NAME AS REGION_NAME,
         RD.KEY_NUM,
         RD.LOW_KEY_VALUE,
         RD.HIGH_KEY_VALUE,
         R1.NAME AS REGION_NAME_1,
         RD1.KEY_NUM,
         RD1.LOW_KEY_VALUE,
         RD1.HIGH_KEY_VALUE,
         NULL,
         NULL,
         TRT.TRLR_TYPE_ID,
         to_char(TRT.EFFECTIVE, 'yyyymmdd'),
         TRT.CONTRACT_NUM_VEHICLES,
         TRT.CURRENT_NUM_VEHICLES
    FROM TL_RESOURCE_CARRIER TRC,
         TL_RESOURCE_TRLR TRT,
         LANE L,
         REGION R,
         REGION R1,
         REGION_DETAIL RD,
         REGION_DETAIL RD1
    WHERE TRC.TL_RESOURCE_ID = TRT.TL_RESOURCE_ID
         AND R.ID = RD.REGION_ID
         AND R1.ID = RD1.REGION_ID
         AND TRC.LANE_ID = TRT.LANE_ID
         AND TRC.CARRIER_ID = TRT.CARRIER_ID
         AND L.ID = TRC.LANE_ID
         AND L.ID = TRT.LANE_ID
         AND L.FROM_REGION_ID = RD.REGION_ID
         AND L.TO_REGION_ID = RD1.REGION_ID
         AND TRC.CARRIER_ID = 'UPS';What we see in these fields bellow are Location ID or Postal Code or States value from an origin to a destination:
    RD.LOW_KEY_VALUE, (Origin)
    RD1.LOW_KEY_VALUE, (Destination)
    Ex:
    H7S 2B9 (Postal code)
    QC (State) etc...
    In these 2 fields bellow, i have keys that link to a specific type of data:
    RD.KEY_NUM,
    RD1.KEY_NUM,
    Ex:
    4 (State)
    8 (Postal code) etc...
    In TRC.CARRIER_ID field, i will have the Carrier ID ex: UPS
    Now here comes my problem:
    I have to link this to the location table to validate for example the postal code is in what state for example.
    4 IN (RD.KEY_NUM) AND (EXISTS (SELECT STATE FROM LOCATION WHERE STATE IN (RD.LOW_KEY_VALUE))
    8 IN (RD.KEY_NUM) AND (EXISTS (SELECT ZIP FROM LOCATION WHERE ZIP IN (RD.LOW_KEY_VALUE, ))If i have UPS carrier ID set from origin postal 7 : H7S 2B9 to Destination postal 7 : G0L 2K0
    and also UPS carrier set from origin postal 7 : H7S 2B9 to Destination State : QC
    Since we have the same carrier, and the same origin postal 7 and that the destination postal 7 equal the destination state from the second record, i need to see that i have these 2 lanes that are overlapping.
    I'm trying to extract all duplicated data like this.
    I know this is kind of a big thing but it can be done in multiple set of you want.
    I just need to start from the beginning.
    Can you please help me?
    Thanks again
    Edited by: 974487 on Dec 2, 2012 2:22 PM

    Hello all
    sorry for the big delay.
    I was working on the SQL;
    I have now this error:
    ORA-01427: single-row subquery returns more than one row
    On this part of the code:
    ( select distinct carrier_id, low_key_value, (select state from location would you know what it is?
    Thanks again
    Full code
    with S1   -- with constuction enables to use selected data twice
    AS
    SELECT NULL,
          NULL,
          TRC.TL_RESOURCE_ID,
          TRC.CARRIER_ID,
          TRC.PERIOD,
          TRC.MAX_LOADS,
          TRC.CONTRACT_MAX_TEAMS,
          TRC.CURRENT_MAX_TEAMS,
          TRC.PERCENT_COMMIT,
          L.NAME,
          R.NAME AS REGION_NAME,
          RD.KEY_NUM,
          RD.LOW_KEY_VALUE,
          RD.HIGH_KEY_VALUE,
          R1.NAME AS REGION_NAME_1,
          RD1.KEY_NUM,
          RD1.LOW_KEY_VALUE as LOW_KEY_VALUE_1,            -- as added
          RD1.HIGH_KEY_VALUE as HIGH_KEY_VALUE_1,          -- as added
          NULL,
          NULL,
          TRT.TRLR_TYPE_ID,
          to_char(TRT.EFFECTIVE, 'yyyymmdd'),
          TRT.CONTRACT_NUM_VEHICLES,
          TRT.CURRENT_NUM_VEHICLES
    FROM TL_RESOURCE_CARRIER TRC,
          TL_RESOURCE_TRLR TRT,
          LANE L,
          REGION R,
          REGION R1,
          REGION_DETAIL RD,
          REGION_DETAIL RD1
    WHERE TRC.TL_RESOURCE_ID = TRT.TL_RESOURCE_ID
          AND R.ID = RD.REGION_ID
          AND R1.ID = RD1.REGION_ID
          AND TRC.LANE_ID = TRT.LANE_ID
          AND TRC.CARRIER_ID = TRT.CARRIER_ID
          AND L.ID = TRC.LANE_ID
          AND L.ID = TRT.LANE_ID
          AND L.FROM_REGION_ID = RD.REGION_ID
          AND L.TO_REGION_ID = RD1.REGION_ID
    select s2.*
    from
    select carrier_id, low_key_value, low_key_1_state 
    from
    ( select distinct carrier_id, low_key_value, (select state from location
      where zip = s1.LOW_KEY_VALUE_1
             or city =  s1.LOW_KEY_VALUE_1
             or state = s1.LOW_KEY_VALUE_1
      and rownum = 1   -- because there are more rows with same city or same state
      )  low_key_1_state,  low_key_value_1
    from s1
    group by carrier_id, low_key_value, low_key_1_state
    having count(*) > 1 -- select duplicates
    )       s2

  • Find to find date between 05/01/2003 and 05/29/2003

    Indeed, it's something about sql...
    I write a programme to have query on access database
    I try to
    sql="select * from PO where Date between to_date('05012003','mmddyyyy') and to_date('05292003','mmddyyyy')";
    but it's doesn't work...why?no (to_date) function in access??
    pls help!!

    When you are going through java to any database it uses a third party bridge that converts the SQL statements into something that the target database understands. Some of these third party bridges only conform to true SQL statements. Best to find out how the bridge functions.
    As such Java supports the ANSI SQL-2 standard.
    I imagine others will correct any errors in my statement, but I belive my answer is esentially right. Of course the jist of it is that you are going to have to find out how the particular bridge you are using handles date manipulations, It has little to nothing to do with the underlying database and everything to do with the connection bridge software.

  • Find date/time when item added item in folder?

    Hey guys,
    I was wondering if there was any Automator Action out there that allows you filter finder items by date "added" to a folder.
    Please don't confuse with the date of the actual item. I am talking about if there is anyway to be able to detect and find when an item was added into a folder.
    Thanks. I hope there is something out there. If not then I hope that there is some sort of applescript that can do this. 
    Please help.
    Phil

    I'm not aware of an Automator action, but starting in OS X 10.7 Lion a Spotlight metadata attribute named kMDItemDateAdded was added that contains the ISO date/time an item was added.  If the item has been moved recently enough to have the attribute (and assuming that Spotlight is indexing the containing folder), there are a couple of utilities you could use.
    The mdfind shell utility won't be quite like filtering, but by limiting the find search to a particular folder and using the appropriate query, you can get a list of items - for example, the following will list items added to the Downloads folder in the last week:
    do shell script "mdfind -onlyin ~/Downloads 'kMDItemDateAdded >= $time.today(-7)' "
    The mdls shell utility can be used if you are just wanting to get the value of a particular metadata attribute from an item, for example:
    set theFile to quoted form of POSIX path of (choose file)
    do shell script "mdls -name kMDItemDateAdded -raw " & theFile

  • Validation For Date,String and Date in a reports Region

    Apex 4
    Good day to all apex users How do I validate a apex_item.text if the value is string the user can only input a string value if it is number then the user can input numbers only and if it is a date the user can only input a date values?

    APEX_ITEMS are not part of the default apex gui... In fact they are just functions which returns html.
    You can however do some stuff with the attributes parameters. You can find some cool stuff over here: Re: Validation For Date,String and Date in a reports Region
    If you want apex validation you need to create a page validation and loop over your apex_items with apex_application.g_f0x
    Br,
    Nico

  • Query to find data of each month

    hi,
    i have 2 table.
    1) Order_tb
    Name Null? Type
    ORDERID NOT NULL NUMBER
    CUSTOMERID NUMBER
    ORDERDATE DATE
    2) Order_d
    Name Null? Type
    ORDERID NUMBER
    PRODUCTID NOT NULL NUMBER
    PRODUCTNAME VARCHAR2(20)
    SELLINGPRICE NUMBER
    i need to find the total find the total selling price for each month in the year 2012 (orderdate).
    i have tried using join, but i could not take the data of 2012 particularly. Please help me on this issue.
    thank you
    Edited by: RSD on Feb 28, 2013 9:18 AM

    Hi,
    RSD wrote:
    ... i have tried using join, but i could not take the data of 2012 particularly. Please help me on this issue.The WHERE clause below is what limits the results to 2012.
    SELECT       TRUNC (t.orderdate, 'MONTH')     AS month
    ,       SUM (d.sellingprice)          AS total_sellingprice
    FROM       order_tb  t
    JOIN       order_d   d  ON  d.orderid  = t.orderid
    WHERE       t.orderdate  >= DATE '2012-01-01'
    AND       t.orderdate  <  DATE '2013-01-01'
    GROUP BY  TRUNC (t.orderdate, 'MONTH')
    ORDER BY  TRUNC (t.orderdate, 'MONTH')
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
    Simplify the problem. For example, pretend you're only interested in the first 3 or 4 months of 2012; we'll find a solution tht can easily be adapted for 12 (or any other number) of motnhs.
    Explain, using specific examples, how you get those results from that data.
    Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
    See the forum FAQ {message:id=9360002}

  • Unable to unlock particular region

    Hi Experts ,
    I want to unlock partivular region,but all regions are unlocked when I select particular region.
    Like if 10 rows are containd month end data and locked but when I unlock last 10th row only but all rows are unlocked like group is working here,I don't want to unlock  other data,please suggest me.
    Example : Parent and child option to choose like X,X1,X2,X3 ,  how to set Modify work status and if we lock the data in all and need to unlock only one (X3).
    Thankyou
    Regards
    Y

    Hi,
    When you change your work status, it will ask you to select the entity, category and the time. This combination determines the data region. Now, there is another check box to apply the work status to the children as well. This means that if you select X as entity and if you select the checkbox, then the work status will be applied to all its children. So, you need to be careful with this. If you want only X3, then select only X3 in the entity.
    Hope this helps.

  • How to find Info objects for particular filed??

    Hi
    I hav doubt Can anyone tel me???
    My Query s <b>How to find Info objects for particular filed??</b>
    For example i hav some table fileds, how to find Info objects for that fields??
    Pls explain me detaily
    Points wil be given for all answers.
    Thanks
    Senthil

    Hi Senthil ,
    You have your field description along with your Field right.
    For example:MATNR - Material Number
    Now take this description and go to your BW side Tcode:RSA1
    1)Search in Modelling >> Infoobjects >> Material Number
    Then you get few hits (matches)  which have description matched.
    For Example: 0material  - Material Number
    Check for the Length and type match.
    You will understand once you get those hits as to which is related to yours.
    2)Go to BI content and search in the infoobjects this has all active and inactive objects but this takes a little time (not much  though).
    3) You have meta data search / simple search also where you can search for the objects with field description as matching criteria.
    Hope your doubt is cleared atleast to some extent.
    Assign Points if helpful.
    Thanks,
    Priyanka

  • Finder Date Modified, Created, etc. Wording - in German

    I am observing the following problem in Lion Finder:
    - wording denoting "Relative dates" is in German now instead of English, for example "Heute" instead of "Today", "Gestern" instead of "Yesterday". etc.
    - the "Language" tab in "Language & Text" is set in the same order as before:
    English
    German
    - the "Format" tab in "Language & Text" is set as before to "Switzerland (German)"
    Is it a bug or strange feature?

    sanjempet --
    Whew, that's a relief!
    But as for your workaround solution: All it will achieve is altering the created and modified dates to RIGHT NOW. What I'm looking to do is to alter the modification/creation dates to some point in the past.
    I'm not doing this for any nefarious reason. I just like to organize my work files chronologically according to when each project was initiated, but sometimes I forget to gather the disparate documents all into one folder right at the beginning, and as a result, sometimes after I finish a job, I will create a new folder to permanently house all the files in an old project, and when that folder is places in a bigger "completed projects" folder and then is organized by "Date created" or "Date modified" in list view, it is out-of-order chronologically because the creation and modification dates of that particular project folder reflect when the folder was created (i.e. today), and not when the files inside the folder were created (i.e. weeks or months ago).
    The simplest solution would simply to be able to back-date the folder's creation or modification date to match the date that the project actually started!

Maybe you are looking for