Find to find date between 05/01/2003 and 05/29/2003

Indeed, it's something about sql...
I write a programme to have query on access database
I try to
sql="select * from PO where Date between to_date('05012003','mmddyyyy') and to_date('05292003','mmddyyyy')";
but it's doesn't work...why?no (to_date) function in access??
pls help!!

When you are going through java to any database it uses a third party bridge that converts the SQL statements into something that the target database understands. Some of these third party bridges only conform to true SQL statements. Best to find out how the bridge functions.
As such Java supports the ANSI SQL-2 standard.
I imagine others will correct any errors in my statement, but I belive my answer is esentially right. Of course the jist of it is that you are going to have to find out how the particular bridge you are using handles date manipulations, It has little to nothing to do with the underlying database and everything to do with the connection bridge software.

Similar Messages

  • "Message is used to carry data between the BlackBerry handheld and an associated server"

     Hi everyone,
    I'm a first time poster!
    I've been receiving about a 100 of these emails everyday for over a week now!  
    Bell mobility and Bell ISP both say it's not their issue or problem to fix and told me to contact the other!  
    The e-mails are orginating from:
    [email protected]
    Any suggestions?
    Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    This message is used to carry data between the BlackBerry handheld and an
    associated server. Please do not delete, move or respond to this message - it
    will be processed by the server.
    BEGINETP 116
    AdxV+90AAAAAIBAIMzAzQUM3MUQgGWZyaXp6ZWxsQHBlaS5zeW1wYXRpY28uY2EAI/HrYFAF
    Q01JTUUDQICAgIAyAAAwOENGOEQ3NkIrRysxALbQEVSv1zvyA8fJF15bAW0AGb/C87pyXKXe
    k+KxQN/Inek!
    ENDETP 70196029
    Message Edited by Frazzledazzle on 09-17-2009 11:44 AM

    HI and Welcome to the forums!
    Here are several KB's that discuss the issue...hopefully one of them has what you need:
    KB04254 Network@etp email messages arrive on the BlackBerry smartphone
    KB10289 What is a Network@etp message
    KB13551 Receiving both email messages and network@etp email messages on the BlackBerry Smartphone
    KB12643 ETP messages are not deleted from the Inbox after delivery to the BlackBerry smartphone
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Best way to transfer data between iMac early 2006 and iMac late 2012

    What is the best way to transfer data between iMac early 2006 and iMac late 2012?

    HI, is this for Migrating all data ove, or just File Sharing?
    What OSX version is in he older one?
    Do you have any backup external drive for the older one?

  • How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

    Hi,
    I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI".  While I'm waiting for  more authorisation to r/3 to carry it out and test this functionality.
    I'd like to ask a question to anyone who has implemented this type solution.  On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query.  I suspect when we run a query I would run it for only a period(using variable) to reconcile.
    My question is this.  Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
    Regards

    DEar Mark,
    There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
    On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
    hope this helps.
    Kindly assign the points if it works.
    Revert back if u need futher help/information.

  • Verify the data between SAP R/3 and SAP BW

    Hi Experts,
    How to verify the data between SAP R/3 and SAP BW at the time of data mismatches in reports.
    give me the proper solution.
    Thanks,
    Syam

    Hello,
    You must know what is the infoprovider source of the data shown in the report.
    Once you know it, check the content filtering by same restrictions as in the mismatch report. Now you have the data in BW.
    Then you have to know the proper transation or table in R/3, from where the extractor retrieves the data to populate the infoprovider; make same restrictions and compare it with data in BW.
    Regards

  • This message is used to carry data between the BlackBerry handheld and an associated server.........

    Hi everyone,
    I am having issues with a couple of BlackBerry's, where they are receiving a message on their phone saying:
     "This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server."
    Email is from "[email protected]"
    This has only appeared since installing the BlackBerry Desktop Software version 6.
    We have used the link below which resolved the issue on one of the BlackBerry's but on the other neither of the options are there.
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04254&sliceId=SAL_Pub...
    The link I have just posted references to version 5, just wondered if anyone knows how to resolve it in version 6 or some other option. Original email is still received fine but want to stop the other email about "This message is used to carry data between.......".
    Thanks in Advance.
    Kevin

    An alternative, if you cannot stop it via the two recommended fixes, is to send those messages to your jiunk folder at the email server level so that they never reach your BlackBerry...
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.

    I have a client with a BlackBerry Pearl 8110. It was (is) configured to receive email from a Microsoft Exchange Server via his Outlook account.  I have uninstalled the Desktop Manager and re-installed ensuring the computer transmits his email via the Re-Director. All settings in the Desktop Manager are correct. The phone was working fine for over 5 years. Now he is getting emails both on his phone and in Outlook saying:
    This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
    I have verified that his phone is not attempting to perform the Enterprise Activation process by checking :
    Options > Advanced Options > Enterprise Activation.
    He does however have a Service Book entitled "CMIME"
    How can I resolve this issue?

    Is the user needing the Redirector service?
    Step 1: If you're not using Redirector or Enterprise, you should uninstall Desktop Manager and then reinstall it using the BlackBerry Internet Service option.
    Step 2: On your device, go to: Options > Advanced > Service Book, and delete all service books for [Desktop]
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do i find difference of data between 2 tables & insert a flag based on

    I got a situation like.
    My application is connecting to different database and getting data to our schema
    using dblink.That data is stored into a temporary table.Every day a nightly job is executed and stores the latest data into temp table .we compare the data in temp table with master table.If it is new record insert into master,if the record does not exists delete it,if the record is modified update.
    This is taking too long in production.
    My idea is
    First iam getting all data into temp table.temp table data is compared with master and getting only modified data(mismatch)into another temp table.i want to insert a flag like I for insert,d for delete and u fro update to this temp while comparing only.
    please give some tips to resolve this issue.
    or give me the best solution to improve its performance.
    Thanks in advance
    Looking forwrd to hear an immediate response

    How do you compare two records? Is it by comparing only PK or UK fields or all the fields? The solution comparing PK's or UK's
    TEMP_TBL table - tid is the PK
    MASTER table - mid is the PK
    update TEMP_TBL set flag='N';
    update(select a.flag from TEMP_TBL a, MASTER b where a.tid=b.mid)
    set a.flag='Y';
    update(select a.flag from TEMP_TBL a, MASTER b where a.tid=b.mid(+) and a.flag='N') set a.flag='I';
    -- Compare fields other than PK.
    -- Update flag
    update(select a.flag from TEMP_TBL a, MASTER b where a.tid=b.mid(+) and a.flag='N' and a.col1<>b.col1) set a.flag='U';

  • Best way to move date between LabVIEW 7.1 and 2010

    We have a large LabVIEW based control and data acquisition system that for reasons beyond the scope of this post is at and needs to stay at LabVIEW version 7.1 for the forseeable future...  We are soon to add a camera diagnostic to this system that, again for reasons beyond the scope of this post, needs to be written in LabVIEW 2010...  The 2010 piece of code will run and need to receive some information such as shot number, when to trigger, etc. from the 7.1 side of the system...  Then after a shot has occurred and a camera image has been acquired, the 2010 code will do some on the fly processing of this image and within a few seconds will need to send back some results data to the 7.1 side... 
    The 7.1 code uses a tag engine approach to sharing data among different codes running on different machines...  I think now that more modern versions of LabVIEW use a shared variable approach...  But I need to communicate as I've described above between the two versions, 7.1 and 2010 (or it could be 2011 if that would offer some advantage)... 
    I'm new at this moving of data between versions like this so if something could offer some advice, especially if there is some tutorial information on this topic, that would be much appreciated...  Thanks in advance for any help that you might be able to offer...  thanks...  bob...

    It really depends if your tag engine like communication approach is a home brown solution or something like the LabVIEW DSC engine. If homebrown and well written you should be able to reuse the client library part of it in newer LabVIEW versions without to many hassles. If it is LabVIEW DSC it may be a bit more complicated since the only means to share DSC tags in version 7.1 was as far as I can remember their proprietary TCP/IP tag interface, which was replaced in newer versions with he shared variable engine.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Sync data between third-party contacts and calendar apps, and the native apps, in 10.9.3+?

    I've had to refrain from updating my Mac Pro from 10.8.5 to 10.9 owing to the removal of SyncServices.  I then read that SyncServices was re-introduced on a limited basis in 10.9.3. 
    It seems unlikely, but I'd like to know whether or not SyncServices in 10.9.3 re-enables the syncing of data between third-party contacts & calendar apps and the native apps, and thereby enables syncing of contacts and calendar info between third-party apps and iOS devices over USB via iTunes.  This is the method I use exclusively by choice in 10.8.5, and I will not change it to a cloud-based solution under any circumstances.
    If it is not possible, is there a third-party workaround?  My calendar app on the Mac Pro at the moment is BusyCal, syncing with Week Cal on the iPhone, but I'll happily buy a new combo of apps if it means I can upgrade to Mavericks and retain USB syncing.
    EDIT: a solution which permits syncing of a third-party calendar app on the Mac Pro with a third-party calendar app on the iPhone over an ad-hoc wireless network would also be acceptable, I suppose.

    Well, that's pretty disappointing.  I guess Apple believes Internet is free and everywhere.

  • Using functional global variables to transfer data between touch screen device and other targets

    Hi,
    We are currently developing a control system that will operate on a cRIO with a touch screen interface. During development we have been using functional global variables (FGVs) to handle most of the settings/data etc, however we have just realised that we may have an issue updating the data on the touch screen, and vice versa.
    Previously we have implemented similar programs using shared variables, however we were wondering if there is anyway to implement FGVs in a similar manner, whether it'd be a combination of FGVs and shared variables.
    Regards,
    Mike
    Software version: Labview 8.2.1

    See this thread on LAVA about sharing FGV's across projects. THis should be extendable to cross paltforms (I believe).
    You also may want to concider an upgrade to LV 8.5.1. We have found a number of performance related issues with LV 8.2.1 and RT.
    If you decide not to upgrade, just remeber what I wrote (above) when you have reason to question the performance.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Complicated Question (see pdf): Use data from one table to find the same data in a second table and take other data from that table and place it in a third table. :)

    I don't even know if this is posible.
    I'm using iwork '09 
    View PDF

    I hope I can clarify:
    For our purposes here:
    Table 1 = "Step 2 - Product Sizes"
    Table 2 = "Option id Master"
    Table 3 = "Export - Product Info"
    Table 1:
    The user would enter values for "productcode," "Horz," and "Vert"
    "Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
    Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
    We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column  and then pull the "optionids" and "productprice" from that row.
    Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
    Table 3: The user does not enter any values on this table. 
    "productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
    "optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
    As I'm writing this I'm realizing that
    A. this is probably really confusing to you.
    B. this may be impossible inside of numbers.
    If you have some other method that would facilitate the same out come but be structured differently please let me know.
    --- maybe to help you understand further what I am doing here is my current workflow:
    I record the size of a piece of art.
    Then I manually go to my "Option id Master" and find the same size.
    I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
    I got to my "Export - Product Info" table and paste the values in the corresponding cells.
    I was hoping to automate this as it takes a long time when you have hundreds of products.
    Thanks for the help!

  • Where can I find up-to-date documentation on building MXI and MXP files?

    Now that Bridge support has been inexplicably pulled from Extension Manager in CS6, I need to find a way to install Bridge scripts. So I'm after current documentation on the MXI format. Can someone point me to it? THanks!
    ...Mike

    Hi Mike,  This FAQ item has information:  http://forums.adobe.com/thread/977023  The Extension Manager help topics are listed here:  http://helpx.adobe.com/extension-manager/topics.html  The MXI reference is listed there, but it appears to be rather dated and only refers to CS 5.5 support.  Please direct future questions to http://forums.adobe.com/community/creativesuites/extensionmanager

  • Compare dates between 2 different rows and columns

    I'm having problems figuring this out.  Here is an example table:
    What I need to be able to find is any records where the Discontinue_Date is greater than the Effective_Date on the next row for a given Customer ID and Part_ID.  This is a customer pricing table so the Discontinue_Date of row 53 for example should never
    be greater than the Effective_Date of row 54130, these are the records I'm looking to find.  So I'm looking for a SELECT query that would look for any records where this is true.  Obviously the last Discontinue_Date row for a Customer_ID will not
    have a next row so I wouldn't want to return that. 
    Let me know if anyone has any ideas or if more clarification is needed, I've been struggling with how to get started on this!!
    Thanks very much in advance!
    JIM

    >> I'm having problems figuring this out. Here is an example table: <<
    NO! Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data
    should use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect. 
    This is minimal polite behavior on SQL forums. You pasted a colored picture that we have to transcribe into DDL to do your job for you. But you also do not know basic terminology! 
    Rows are not records, since tables are sets, there is no “next row” concept, rows do not have physical row numbers, etc.  Your mindset is still in a spreadsheet and not RDBMS. 
    >> What I need to be able to find is any records [sic] where the discontinuation_date is greater than the effective_date on the next row for a given customer_id and part_id. <<
    Why not prevent bad data instead of trying to kludge and report it after the fact? 
     Consider this self-reference trick to prevent gaps in a timeline of events:
    CREATE TABLE Events
    (event_id CHAR(10) NOT NULL,
    previous_event_end_date DATE NOT NULL
    CONSTRAINT Chained_Dates
    REFERENCES Events (event_end_date),
    event_start_date DATE NOT NULL,
    event_end_date DATE UNIQUE, -- null means event in progress
    PRIMARY KEY (event_id, event_start_date),
    CONSTRAINT Event_Order_Valid
    CHECK (event_start_date <= event_end_date),
    CONSTRAINT Chained_Dates 
    CHECK (DATEADD(DAY, 1, previous_event_end_date) = event_start_date).
    << other stuff for this event >>
    -- disable the Chained_Dates constraint
    ALTER TABLE Events NOCHECK CONSTRAINT Chained_Dates
    -- insert a starter row
    INSERT INTO Events(event_id, previous_event_end_date, event_start_date, event_end_date)
    VALUES ('Foo Fest', '2010-01-01', '2010-01-02', '2010-01-05');
    -- enable the constraint in the table
    ALTER TABLE Events CHECK CONSTRAINT Chained_Dates
    -- this works
    INSERT INTO Events(event_id, previous_event_end_date, event_start_date, event_end_date)
    VALUES ('Glob Week', '2010-01-05', '2010-01-06', '2010-01-10');
    -- this fails
    INSERT INTO Events(event_id, previous_event_end_date, event_start_date, event_end_date)
    VALUES ('Snoob', '2010-01-09', '2010-01-11', '2010-01-15'); 
    Since you did not write DDL for us, you can use this idiom to get a working schema. 
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • Data Integrator 11.7.x and VM WIndows 2003/2008 Servers

    Is Data Integrator 11.7.x supported in the following platform -
    VM Windows 2003 Server
    VM Windows 2008 Server
    ??? Thanks

    The first one yes, for the latter you need to upgrade to DI 12.2 ( DataServices 3.2)

Maybe you are looking for