Finding Missing values

How to find the missing values in sequence of values. I need a query for this.
Thanks

Assuming you are looking for sequences missing in table YourTable and column YourSequenceColumnName from the list starting from 4 to 10... This query will get them
select a.seqno
from
     (select level as seqno
     from dual
     where level>=4
     connect by level <=10
     ) a
left outer join YourTable b
     on a.seqno = b.YourSequenceColumnName
where b.YourSequenceColumnName is null
/

Similar Messages

Find missing value

hi all,
i have a small prob i.e. in selection screen user enters a period range and i calc. the stock for it. is the period in the given range is missing in the table i need to perform some action.
suppose range is 2 to 5 and 4th period is missing then how shld i find that .
thanx...

Hi Nilesh,
go through following code...
data: begin of itab occurs 0,
      empid type i,
      name(20) type c,
      address(40) type c,
      end of itab.
data:val1 like itab-empid.
itab-empid = '01'.
itab-name = 'Taneesha'.
itab-address = '1001/11 shalimar garden '.
append itab.
itab-empid = '02'.
itab-name = 'Taneesha1'.
itab-address = '1001/11 shalimar garden '.
append itab.
    itab-empid = '04'.
itab-name = 'Taneesha3'.
itab-address = '1001/11 shalimar garden '.
append itab.
select-options:s_empid for itab-empid.
val1 = s_empid-low.
loop at itab where empid in   s_empid .
if val1 > s_empid-high.
exit.
endif.
if itab-empid = val1.
write:/ itab-empid ,
itab-name,
itab-address.
elseif itab-empid ne val1.
write:/ 'data not found'.
endif.
val1 = val1 + 1.
endloop.
i hope u will get some help .....
Thanks & Regards
Ashu Singh

Find missing values in third table based on two other tables

Hi- I have tried to do this on my own but the answer eludes me. Can someone please point me in a better direction? We have a table project_categories with project_IDs and related project category_IDs. We have another table contact_categories with contact_IDs and related contact category_IDs. We use these two tables to link contacts to projects by at least one category_ID. It works well for email notifications. We have a third table for "planholders" who are interested in particular projects. The planholder table has contact_IDs and related project_IDs. I want to find contacts who have expressed interest in a project, by inserting a row in the planholder table, but they have not selected any of the project categories in contact categories. This would be an unusually rare exception, so to test it I added myself as a contact 100010 and as a project "planholder", but deliberately did not select any of the related project categories in contact categories.
select ph.contact_id, ph.project_id, pc.category_id, cc.category_id
from purchasing_planholder ph, purchasing_project_categories pc, purchasing_contact_categories cc
where ph.project_id=pc.project_id
and ph.contact_id=cc.contact_id
and ph.contact_id||ph.project_id||cc.category_id
not in (select ph.contact_id||pc.project_id||pc.category_id
from purchasing_planholder ph, purchasing_project_categories pc, purchasing_contact_categories cc
where ph.project_id=pc.project_id
and ph.contact_id=cc.contact_id)
and ph.contact_id=100010
This gives me every category for the test contact and every category for the project. I want to find contacts in the planholder table who have not selected any of the categories related to the specific project they selected in the planholder table. I tried minus, outer joins, etc. Does this require PL/SQL and a temp table, or can I find the exceptions with a report? Or do I need a different approach? The ideal answer would display one row with the contact_ID and the project_ID, where the contact has not selected any of the project categories. This would be used to alert them that they need to select at least one of the project categories on the contact form. Thanks for any feedback.
Peter
CONTACT_ID PROJECT_ID CATEGORY_ID CATEGORY_ID
100010 701 1 19
100010 701 1 18
100010 701 16 19
100010 701 16 18
100010 701 21 19
100010 701 21 18
100010 701 24 19
100010 701 24 18
8 rows selected

Hi User,
When you Post a Question in Forum, Please be clear of the Inputs to be given, the expected output and the tries you made,
the errors/results you faced.
Also, see this link of BluShadow.
SQL and PL/SQL FAQ
Please enclose the query or programs in code tags for a formatted code.
Just Try something like this,
SELECT *
FROM emp c
WHERE NOT EXISTS (SELECT *
                     FROM emp a
                    WHERE EXISTS (SELECT *
                                    FROM emp b
                                   WHERE a.empno = b.empno));In the Inner Query, the conditon checked is empno same in both the tables, and for example some rows are obtained, other than
this rows all other results are obtained from the outer query.
In the above case no rows are returned.
Thanks,
Shankar

Applescript output volume consistently "missing value"

It seems that the output volume returned by the "get volume settings" applescript call is consistently the "missing value". Setting the output volume to a different value "works" -- that is, the effective volume is set to the value I specify -- but the value returned by applescript is still "missing value".
For example, the following script
display dialog "output volume = " & (get output volume of (get volume settings))
set volume output volume 50
display dialog "output volume = " & (get output volume of (get volume settings))
gives me this dialog both times
What's up with that?
This is on Mavericks 10.9.0

Yes, I discovered much the same thing. If I have my system/default output device set to my headset, then I get the behavior I described.
However, I also find that while the output device is "missing value" the other values, including muted, have proper values.
There is also no way to set the output device via Applescript (except by the distasteful method of poking they System Preferences GUI settings). So there is no proper way of really controlling sound output via applescript.
But thanks for the prompt response. If only the Applescript documentation were complete in this respect (unless I missed it somehow).

Finding Missing Numbers

I want to find missing numbers from a column which is alpha numeric, its last five positions are numeric. At first three positions there are different combinations of alphas i.e. *'BA ','BAW','SA ','SAA' ..........* if alphas are two then 3rd position is blank. I also need it to generalised this to cover all existing alpha numeric series.
SELECT SUBSTR (a.claim_no, 4, 5) + 1
FROM core_business.cb_pensioner a
WHERE SUBSTR (a.claim_no, 1, 3) = 'BA '
   AND NOT EXISTS (
                 SELECT NULL
                   FROM core_business.cb_pensioner b
                  WHERE to_number(SUBSTR (b.claim_no, 4, 5)) = to_number(SUBSTR (a.claim_no, 4, 5)) + 1)
   order by SUBSTR (a.claim_no, 4, 5);I am getting ORA-01722 error

You have two issues with such a task.
Problem 1 is how to convert the trailing part into a number so that you can compare values.
to_number(SUBSTR (b.claim_no, 4, 5)) works, but only if the value in b.claim_no is always a number regardless of the other column criteria.
A statement like
WHERE SUBSTR (a.claim_no, 1, 3) = 'BA ' /* filter 1 */
and to_number(SUBSTR (b.claim_no, 4, 5)) > 1 /* filter 2 */
...might fail because your table might have a value like
b.claimno = 'XYZ1234b'
The way you wrote the query the database will decide which filter criteria it executes first. It might be filter1, but could also be filter2. If filter2 is executed first then you will get the error message.
Problem 2 how to order and compare different rows, so that you can find the missing values.
Here the analytic LEAD(LAG) function is very helpful. it will give you access to the next (or previous row).
Both problems can be overcome.
Here is my try, but I'm not sure if it works in your case. You might need to adapt a little.
This should work if all the rows are numeric that belong to the specific groups. if you can have wrong data in there too, then a different approach is needed.
with testdata as (select 'XYZ1234b' claim_no from dual union all
            select 'BA 12345' claim_no from dual union all
            select 'BA 12346' claim_no from dual union all
            select 'BA 12350' claim_no from dual union all
            select 'BAW11111' claim_no from dual union all
            select 'BAW11113' claim_no from dual union all
            select 'XYZ1234b' claim_no from dual )
/* end of test data creation */
select claim_no, substr(claim_no, 1,3) part1, substr(claim_no, 4) part2,
       to_number(substr(claim_no, 4)) current_num,
       lead(to_number(substr(claim_no, 4))) over (partition by substr(claim_no, 1,3) order by to_number(substr(claim_no, 4))) next_num,
       lead(to_number(substr(claim_no, 4))) over (partition by substr(claim_no, 1,3) order by to_number(substr(claim_no, 4)))
        - 1 - to_number(substr(claim_no, 4))
        as "missing_values"
from testdata
where substr(claim_no, 1,3) in ('BAW','BA ')
order by claim_no;
CLAIM_NO PAR PART2 CURRENT_NUM   NEXT_NUM missing_values
BA 12345 BA 12345       12345      12346              0
BA 12346 BA 12346       12346      12350              3
BA 12350 BA 12350       12350
BAW11111 BAW 11111       11111      11113              1
BAW11113 BAW 11113       11113Problem 1 is solved because the where condition is always executed before the function in the select clause, especially in connection with an analytic function.
Problem 2 is also solved by using the analytic function LEAD function. And this is fast, because you access the same table only one time. Other solution might do a subquery to fetch the value from the previous/next row. This means several accesses to the same table and is usually much slower.
Edited by: Sven W. on Sep 20, 2010 2:32 PM

How to find the value of a variable in other program

How to find the value of a variable in other program say I am in a FM and this FM is being called in from other program and I want to know some of the variable details of the program from the FM itself. Imagine if this is a txn. and I need to know the details from some of the programs while executing the same transaction
Regards
Vin

Hi Vinayak,
     you will be having your first program values in internal table or some variables,
    when you are calling the second program you wii use like this,
    SUBMIT <Second Program Name> USING SELECTION-SCREEN '1000'
                       WITH s_emp(second program select-options)   IN t_emp(first program variables)
                       WITH p_chk   EQ t_chk
                       WITH p_r1    EQ t_r1
                       WITH p_month EQ t_month
                       WITH s_cust1 IN t_cust1
                       WITH p_r2    EQ t_r2
                       WITH s_cust2 IN t_cust2
                       WITH s_week IN t_week
                       AND RETURN.
you have pas like this to get your first program details.

How to get minimal value from children with skip missing values?

Hi,I would like to get minimum value from children, but I would like to skip missing.Minimal value from children works fine (see following formula):@MIN(@CHILDREN("member_name"));Minimal value with skip missing (see following formula) returns error:@MINSRANGE(SKIPMISSING,@CHILDREN("member_name"));Error message: "This function must be a macro".Question: How can I write a formule to get minimal value from children without missing values.What is a macro and how can I write it? If possible I would like to write formule instread of macro!Thanks,Grofaty

Hi,I have found out solution:@MINS(SKIPMISSING,@CHILDREN "member_name")); No more help is needed.Thanks,Grofaty

Crystal Report: ERROR - Some parameters are missing values

          mine report it possesses a single parameter ....
          this is the example of like tries of to change the value set up in the report...
          ERROR: Some parameters are missing values
          thanks help...
          EXAMPLE:
          <%@ page import="com.crystaldecisions.report.web.viewer.*"%>
          <%@ page import="com.crystaldecisions.report.htmlrender.*"%>
          <%@ page import="com.crystaldecisions.reports.reportengineinterface.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
          <%@ page import="com.crystaldecisions.common.keycode.*"%>
          <%@ page import="java.util.*"%>
          <%
          try {
          IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
          String report = "report/ReportParametro1.rpt";
          IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report,
          request.getLocale());
          Fields fields = new Fields();
          ParameterField pfield1 = new ParameterField();
          Values vals1 = new Values();
          ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("CICCIA");
          pfieldDV1.setValue("SELECT descrizione, validoDa, validoA FROM tariffari");
          pfieldDV1.setDescription("Query Dinamica....");
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          CrystalReportViewer viewer = new CrystalReportViewer();
          viewer.setReportSource(reportSource);
          // layout
          viewer.setOwnPage(true);
          viewer.setBestFitPage(true);
          viewer.setHasLogo(false);
          viewer.setHasRefreshButton(true);
          // group navigation
          viewer.setHasToggleGroupTreeButton(false);
          viewer.setDisplayGroupTree(false);
          // page navigation:
          viewer.setHasGotoPageButton(false);
          // print/export
          viewer.setHasExportButton(true);
          //viewer.setPrintMode(CrPrintMode.PDF);
          viewer.setPrintMode(CrPrintMode.ACTIVEX);
          viewer.setIgnoreViewStateOnLoad(true);
          viewer.setParameterFields(fields);
          viewer.setEnableParameterPrompt(false);
          viewer.refresh();
          viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),
          out);
          viewer.dispose();
          }catch(Exception e){
          out.println("Errore " + e.getMessage());
          %>


I am facing the same problem. After selecting an export option (PDF/RTF), the same error message is coming up.
          Also, what needs to be done for displaying export option of EXCEL?
          Thanks,
          Farzal

"Open VI Reference" Option "Prompt user to find missing subVIs"

I am using "Open VI Reference" to dynamically load a VI. For the "option" control of the "Open VI Reference" node, I pass "0x10" or "10" in hexadecimal, which supposedly "prompt user to find missing subVIs." Nevertheless, I don't get a prompt message dialog when I intentionally pass an invalid or missing VI path. Instead I just get an Error Code 7. What does this option "Prompt user..." suppose to do?

Make sure you set the properties on the integer input into the “options” control to the “Open VI Reference” to be a Hexadecimal format (right-click on the “options” control input, select Format and Precision…, then select Hexadecimal). Now, if you re-run your VI and wire in a VI with a missing subVI, the Open VI Reference will appear with a dialog that will prompt you to browse to the missing subVI. This is exactly the same message LabVIEW displays when it attempts to open a VI and cannot find its subVIs.
I’ve attached a simple example program to demonstrate. Enter the path to the “number extractor.vi” as the VI to open. You should see a dialog prompt appear asking for the “Search 1D Array – Complete.vi”.
Hope this helps!
Attachments:
openVIRefExample.zip ‏20 KB

Display of missing values in a table view.

Hi everyone,
I have a table view with 7 columns and 10 rows which displays only those values which are missing in the DataBase Table.
Is it possible to show only the missing values as '-' in a table view, the table view is having 7 different fields.
Also when the value is inserted at run time the corresponding field should be updated accordingly and the value will no longer be displayed in the table view as '-'
please advice.
Regards
Neo.

Welcome to SDN.
do you mean to say that in some rows some column values will be blank and you want to replace the blanks with '-'.
loop thru the itab which you are passing to tableview and for the blank cells pass '-'.
<i>Also when the value is inserted at run time</i>
so you are having editable tableview. to update the value back to the dbtable, you have to read it in oninputprocessing and update it to dbtable .
search the forum on how to read the user entered value from the table view so that you can update the dbtable.
Regards
Raja

How to map a missing value to a member?

Hi all,
Let say I have 3 dimensions in my data source file:
Account, Entity, Product, Data
A400, E100, P200, 10000
A401, E110, P300, 20000
A401, ,P400, 30000
As you can see in the third record, Entity is missing. How can I map this to, let's say, No_Entity? In my Entity mapping table, Type: Like, I have tried using Null and Missing as the Rule Definition, but neither worked.
Couple of clarifications: This is for an Essbase BSO cube. In my real case, the missing values are not Entity members, but 3 custom dimension members.
Any ideas?
We are on 11.1.2.2.
Thanks,
Mehmet

You have a couple of options:
1) Add a wilcard mapping to your entity maps which maps anything you have not explicitly mapped to NoEntity i.e. * --> NoEntity
2) You cannot have an empty string as a source value so in your import format, associate an import script with the Entity dimension source field entry and check the length of the string of the source field as it comes in. If the length is 0 assign a value of NoEntity to be returned and map that source value explicitly inyour Entity map

Deleting rows with missing values in field in start routine of update rule

Hello experts,
how can I delet rows with missing values in a specific field in the start routine of update rules?
I think ABAP code should look something like this:
delete ... from DATA_PACKAGE where Z_NO = ''.
thanks in advance for any suggestions!
hiza

Write:
delete data_package where field = value.
Hope it helps.
Regards

ORA-23460: missing value for column column name in resolution method

Hi All,
We have implemented bi-directional replication via oracle streams..Oracle 10g 10.2.0.4
We are getting following error in conflict resolution .ORA-23460: missing value for column "ASSIGNED_APPL_USER_ID" in resolution method "<method>" for
"TMADMIN"."PATIENT_VISITS"."REP_UPDATE" ORA-01403: no data found .
Above column ASSIGNED_APPL_USER_ID is NULL column ,We are using MAXIMUM resolution method for update conflict handler .We tried many times on toad the same scenarios and working fine.
We have set supplemental logging on primay and unique columns.
I found many docs on internet and they all said add supplemental logging on all columns.
We did set up like this ...:
DECLARE
COLS DBMS_UTILITY.NAME_ARRAY;
BEGIN
cols(1) := 'STUDY_ID';
cols(2) := 'KENDLE_STUDY_SUB_ID';
cols(3) := 'SITE_ID';
cols(4) := 'PATIENT_ID';
cols(5) := 'VISIT_NUMBER';
cols(6) := 'VISIT_TYPE';
cols(7) := 'VISIT_DATE';
cols(8) := 'CRF_COLLECTION_DATE';
cols(9) := 'DT_CREATED';
cols(10) := 'DT_MODIFIED';
cols(11) := 'MODIFIED_BY';
cols(12) := 'MONITOR_VISIT_DATE';
cols(13) := 'UNSCHEDULED_VISIT_REASON';
cols(14) := 'LAST_SCHEDULED_VISIT_NUMBER';
cols(15) := 'VISIT_DATE_IN_TRIALBASE';
cols(16) := 'PROJECTED_VISIT_DATE';
cols(17) := 'SEND_CERTIFIED_LETTER_YN';
cols(18) := 'ASSIGNED_APPL_USER_ID';
cols(19) := 'DATE_CERTIFIED_LETTER_SENT';
cols(20) := 'DURATION_OF_CALL_IN_MINUTES';
cols(21) := 'COMPLETED_APPL_USER_ID';
cols(22) := 'CALL_STATUS';
cols(23) := 'VISIT_HYPERLINK';
cols(24) := 'NEXT_CALL_DATE';
cols(25) := 'DT_PMNT_REQUESTED_TO_SPONSOR';
cols(26) := 'VISIT_DATE_NAP_YN';
cols(27) := 'MONITOR_VISIT_DATE_NAP_YN';
cols(28) := 'CRF_COLLECTION_DATE_NAP_YN';
cols(29) := 'IMPORTED_SUBJECT_VISIT_DATE';
cols(30) := 'REMINDER_SENT_DATE';
DBMS_APPLY_ADM.SET_UPDATE_CONFLICT_HANDLER(
OBJECT_NAME =>'TMADMIN.PATIENT_VISITS',
METHOD_NAME =>'MAXIMUM',
RESOLUTION_COLUMN =>'DT_MODIFIED',
COLUMN_LIST =>cols);
END;
DT_MODIFIED is our resolution columns......
Any help would be appreciate...
Thanks in advance.
Thanks,
Nick.

You should post this question the Oracle Server forums.
Good luck!
Warm regards.
ashok

Finding missed sequence numbers and rows from a fact table

Finding missed sequence numbers and rows from a fact table
Hi
I am working on an OLAP date cube with the following schema:
As you can see there is a fact transaction with two dimensions called cardNumber and Sequence. Card dimension contains about three million card numbers.
Sequence dimension contains a sequence number from 0 to 255. Fact transaction contains about 400 million transactions of those cards.
Each transaction has a sequence number in 0 to 255 ranges. If sequence number of transactions of a card reaches to 255 the next transaction would get 0 as a sequence number.
For example if a card has 1000 transactions then sequence numbers are as follows;
Transaction 1 to transaction 256 with sequences from 0 to 255
Transaction 257 to transaction 512 with sequences from 0 to 255
Transaction 513 to transaction 768 with sequences from 0 to 255
Transaction 769 to transaction 1000 with sequences from 0 to 231
The problem is that:
Sometimes there are several missed transactions. For example instead of sequence from 0 to 255, sequences are from 0 to 150 and then from 160 to 255. Here 10 transactions have been missed.
How can I find all missed transactions of all cards with a MDX QUERY?
I really appreciate for helps

Thank you Liao
I need to find missed numbers, In this scenario I want the query to tell the missed numbers are: 151,152,153,154,155,156,157,158,159
Relative transactions are also missed, so I think it is impossible to get them by your MDX query
Suppose this:
date
time
sequence
20140701
23:22:00
149
20140701
23:44:00
150
20140702
8:30:00
160
20140702
9:30:00
161
20140702
11:30:00
162
20140702
11:45:00
163
As you can see the sequence number of the last transaction at the 20140701 is 150
We expecting that the first transaction of the next day should be 151 but it is 160. Those 10 transactions are totally missed and we just need to
find missed sequence numbers

How to find report values using report writer

hi,
Please help me.
How to find report values using report writer
Regards,
RRK.
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 12:01 PM

Thanks all for the reply.
I am trying to solve a problem where report parameter value that is set at Management Console is wiped out after calling replaceConnection.
databaseController.replaceConnection(oldConnectionInfo, newConnectionInfo,
null,DBOptions._doNotVerifyDB);
We have to support changing database connection from a java utility
class. But once replaceConnection is called all existing static parameter values are lost. To fix this issue we thought of getting parameters and values before calling replaceConnection and setting it after replaceConnection.
Version is CS2008 SP3 - version 12.3.0.601
If there is any other option of fixing the original wipe out issue?
ParameterValues.getValues() didn't return value. I will try ParameterValues.getCurrentCalues() but the document says ParameterValues.getValues() is equivalent to the IParameterField.getCurrentValues() method unless it is empty, in which case it is equivalent to the IParameterField.getDefaultValues() method.
So getCurrentValues() may not work.

Finding Missing values

Similar Messages

Maybe you are looking for