Finding out when an AD user account is deleted

All:
Once a user account is deleted from AD, is there any way to query AD and find out what date the account was deleted?
Thanks in advance.

> DCs:
http://blogs.technet.com/b/abizerh/archive/2010/05/27/tracing-down-user-and-computer-account-deletion-in-active-directory.aspx
Yes, that's the preferred solution. In addition, if tombstone time
hasn't expired, you can check DeletedObjects (use adexplorer for that)
and have a look at "WhenChanged".
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

Query to find out the list of user who have delete access

Hi,
I need a query to find out the list of users who have delete access on perticular folder/universe/ reports in infoview.
Please advice.
Regards,
Neo.

orton607 wrote:
thanks for replying guys. But the thing is i am using dynamic sql execute immediate in my package, so i want those tables also and the schema name.
thanks,
ortonThis is not possible. The best you could do is to have a good guess.
Or how would you parse some dynamic statement as this:
   v_suffix := 'loyees';
   v_sql := 'Select count(*) from (select ''nonsense'' col1 from emp'||v_suffix||') where col1 = ''Y'''';
   execute_immediate(v_sql);
...What is the table name? How do you want to parse that?
Better rewrite all dynamic SQL statements into non dynamic ones. Or do the source control logic for those dynamic parts in an extra module. For example implement your own dependency table and force every developer to add there all dynamic parts.

How do i find out or reset my user account password?

i just downloaded osx lion and mac prompted me for a user password and i have no idea what that is or how to find out what it is.

You need to cancel the Lion install for now.
Print this out as your going to be off the computer.
If you have the 10.6 disk then stick it in the computer and reboot holding c
The second screen in is the OS X installer, but if you look under the Utilities menu you can reset your pasword.
If you don't have a 10.6 disk your going to need to do this
Grab the name of the user account you want to reset the password for, write it down.
The Easy Password Reset Way. (no disk required)
1: Reboot the machine holding Command and S keys,you'll boot into single user mode.
2: Type in each command below followed by Enter or Return
fsck -fymount -uw /passwd "username"
(where "username" is the users name of the password your trying to change)
Example:
fsck -fymount -uw /passwd johnnyboy
If you don't know the name of the users then enter
ls /Users/
and you'll see three items: .localized, Shared, and a "username"
When done
exit
or
reboot
(note: if a firmware password is set, this or c booting from theinstaller cd will not work)

Is there a way to find out who created a user account?

Thanks.

Assuming that auditing isn't enabled and the event already happened, you can use LogMiner (see Note 62508.1 The LogMiner Utility), here an example:
system@ORCL> create user demo1 identified by demo1;
User created.
sys@ORCL> begin
2    dbms_logmnr.add_logfile(
3    '/u01/app/oracle/oradata/orcl/redo01.log',DBMS_LOGMNR.NEW );
4    dbms_logmnr.add_logfile(
5    '/u01/app/oracle/oradata/orcl/redo02.log',DBMS_LOGMNR.NEW );
6    dbms_logmnr.add_logfile(
7    '/u01/app/oracle/oradata/orcl/redo03.log',DBMS_LOGMNR.NEW );
8* end;
9 /
PL/SQL procedure successfully completed.
sys@ORCL> execute dbms_logmnr.start_logmnr;
PL/SQL procedure successfully completed.
sys@ORCL> select scn, username, sql_redo from v$logmnr_contents where upper(sql_redo) like 'CREATE%';
       SCN
USERNAME
SQL_REDO
   3680636
SYSTEM
create user demo1 identified by VALUES 'DD9FD1922A0AFC29' ;If the info isn't on the online redo logs, you can use archived redo logs instead.
HTH
Enrique

How you can find out when someone using your icloud account

how you can find out when someone using your icloud account

Someone on a different device only needs to sign with your iCloud ID and password in order to access your account, they don't need to answer any security questions if they have your credentials. If you think this happened, you should change your iCloud password as explained here: iCloud: Change your iCloud password. After you change the password, you will need to change it on your devices by going to Settings>iCloud>Account and entering the new password.
If you want to inquire further about this, contact the Apple account security team: Apple ID: Contacting Apple for help with Apple ID account security.

How to find out when was local administrators group changed

Hi
Is there any way how to find out when was user added to local administrators group on server(2003 to 2012) ?

Hi,
If you have auditing enabled for "Audit account management" and your security logs are not overwritten then you can look for a 4732 or 636 (Windows 2003) event ids.
https://technet.microsoft.com/en-us/library/cc737542(v=ws.10).aspx
https://technet.microsoft.com/en-us/library/dd772663(v=ws.10).aspx
Hope it helps.
Regards,
Calin

How do I find out when openreach are connecting my...

Ok so I'm now at the point of tearing my hair out....
After a fault with our line almost 2 years ago I got talking to the engineer. He told me that the board in the exchange that runs our broadband is set for fibre but would need all the other work to be completed for it to go live i.e cabinet and cables layed ect ect but I should expect something to happen within a year. So I waited and waited and waited. I contacted BT whom I am a customer about said roll out in my area. They told me they do not have that information at which time the Openreach website line checker said the exchange was enabled but nothing else.
So I waited some more and last October/November (2014) we had sub contractors ask if they could store their plant machinery on our land.. we asked what they were doing to which they replied "digging the road and laying the tubeing for fibre cables for BT Openreach" . They also told us that they were there just to dig the road and NOT lay the cables.
After the work was completed I still heard nothing but then later found out that BT Openreach had installed the cables but had not connected said cables to our serving cabinet. We spoke to another Openreach engineer working outside our property and asked what they were doing and we were told its was work being carried out for "OUR" fibre broadband. (the cables stop at our property and go nowhere else we are literally at the end of the line).
So I have waited some more. Contacted BT (my ISP) and have been told yet again they do not know that information.
Again waited some more then tried the line checker via the openreach website this time I was greeted with your serving cabinet is now connected and ready for fibre orders..... guess what BT have told us that that cabinet is indeed live but our property is not connected.
Openreach (via website) tell me to contact my ISP and when I do (BT) they tell me they do not have that information. I am being sent in very small circles. I know the line is there I know the excahnge is active and my serving cabinet is live but I can't contact anyone to find out when this work is going to be completed. Obviously OpenReach would be my best bet but there is no contact details for end user enquiries.
Some one is sat in an office sending out workmen/engineers. How on earth do I find this out???????????
Before I get any replies I know I have fibre line to the property I know my cabinet is live and I now my excahnge is ready. It seems that the only thing that needs doing is the line to the cabinet need connecting/activating. I want to know when or how I go about finding this out. I am on these forums as a last ditch attempt. I find it very frustrating that time and money as been invested closing and digging the road and setting everything up for it not to be completed and then make it impossible to find out why.

Hi sharkbiscuit79,
Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013. PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

How to find out how many concurrent users using web application?

Hi all,
I have a web application deployed using 9iAS. I am trying to find out how to find out how many concurrent users are using this application at any one time. According to Oracle there is no way to see this information using the enterprise manager interface.
Does anybody out there know how I can find out this information in real time? Failing that, are there any good analysis tools out there that display usage to the minute (all the tools I have found show usage by hour which is not sufficent for my needs).
Any help would be much appreciated,
Caroline

I know I haven't heard of any software to do this, but this also sounds like a really hard problem to try and really analyze well.
The trick is, you might "infer" how long a user is using an application based on when cookies are set and when they're set to expire. If that's a long time, though, that could count far more "concurrent" users than are actually there. A user could simply close the application at any time and stop using the application; you can't really detect that because the server isn't "told" when the user closes their browser or goes somewhere else.
A good perl script might be able to read the Apache access log and tell you how many unique IPs asked for a given directory in which various applications are stored in any 5 minute span of time... that could be something like an indicator of "concurrent" users.
If you don't know Perl, I'd suggest getting the O'Reilly & Associates book on Perl and learning it, because the more I think about this, the more this sounds like a textbook example for applying a Perl script.

How to find out when the last time a tcode was run by someone

Hi Team,
I am just trying to find out if there is a way to find out when the last time a tcode was run by someone.I mean i need to know when was a certain tcode was last run.
Thanks,
Priyanka

HI Priyanka
Another way would be using transaction STAT,enter the t-code you like to monitor.This will provide all details,like user, time etc...
Hope this will help
Thanks
Santosh Kumar

The other day at school i had lost/stolen ipod touch i had signed up with apple but i havent download the app (find my iphone) is there any way i can find out when my ipod touch gets connected to a wifi and track it

how do u track an ipod touch when its connected to a wifi and how do u find out when its your stolen ipod touch is connected

If you set up the Find My iPod service prior to the iPod going missing - the app is for tracking an iOS device from another iOS device - then there is a chance that can be tracked, though it depends on a number of factors (the iPod is turned on, connected to a WiFi network, and has not had the Find My iPod service disabled). Log into icloud.com and go to the Find My iPhone section. Note, though, that you'll only get the location of the WiFi router to which the iPod is connected; there's no way to pinpoint the exact location of the iPod itself.
If you did not set up Find My iPod, then there is no way to track it. Notify the police and change any passwords for any online accounts you may have used from your iPod (the iTunes Store, for instance).
Regards.

Is it possible to find out when was ipod nano 6th gen last time connected to the iTunes?

Hi
I would like to know is it possible to trace this information using serial number or is it possible to get this info from some authorized personal?
Thanks in advance

You may not be able to show "When" the iPod nano was plugged in, but you can find out when the last sync was. Open the desktop iTunes app (you don't need to plug the nano in), choose the iTunes drop down menu, select "Preferences" {or after opening iTunes, use Command-Comma to show the Preferences, select the "Devices" icon. It will show all devices which have been synced. This may or may not show if logged in under another user. This is only the easiest way. Jim

How to find out when my upgrade is

how can i find out when my next device upgrade is without visitng a verizon store?

Log in to your online verizon account then on the left hand side select your phone, then right below the picture of your phone it should tell you, hit the little grey box to see more phones on the plan and more details

How to find out when I can cancel

I have searched the BT site and followed links that haven't worked trying to find out when my contract is up for renewal.
I would like to cancel as my broadband is always dropping, I never use the telephone as I have mobile and the BT vision has never really worked properly (probably due to broadband signal - who knows!!)
I can't really afford it each month either
I just want to know when my contract ends as I don't want to incur too high a charge. I don't wish to ring BT as I don't want someone trying to talk me into a new package (plus it costs a fortune to ring from my mobile).

Hi filbberty,
If you are willing to give us one more shot I'll be happy to have a look into your connection difficulties and get the broadband running better so you can use your Vision as well.
Could you drop me in an email please with your BT account and telephone number along with a link back to this thread.
Just send using the contact us form in my profile under the 'about me' section and mark FAO Craig please.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How to find out when dcpromo was run on a server?

Is there an event ID or something that gets logged that shows when dcpromo was run on a server? I am trying to figure out when a server was promoted to a domain controller.
Thanks

multiple ways to find out when DCPROMO was executed......
* Check the DCPROMO.LOG in C:\Windows\Debug
* Check the creation dates of the folder for the NTDS.DIT file and the SYSVOL
* Check the creation of the computer account, the NTDS Settings object (all in AD)
this should give you an idea of when DCPROMO was executed
Cheers,
(HOPEFULLY THIS INFORMATION HELPS YOU!)
Jorge de Almeida Pinto | MVP Identity & Access - Directory Services
* This posting is provided "AS IS" with no warranties and confers no rights!
* Always evaluate/test yourself before using/implementing this!
* DISCLAIMER: http://jorgequestforknowledge.wordpress.com/disclaimer/
################# Jorge's Quest For Knowledge ###############
###### BLOG URL: http://JorgeQuestForKnowledge.wordpress.com/ #####
#### RSS Feed URL: http://jorgequestforknowledge.wordpress.com/feed/ ####
-------------------------------------------------------------------------------------------------------<>
"K_evin Zhu" wrote in message news:[email protected]...
Hi,
As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
unmark the answer as you wish.
BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best Regards
Kevin
Jorge de Almeida Pinto [MVP-DS] | Principal Consultant | BLOG: http://jorgequestforknowledge.wordpress.com/

How to find out when a program was last executed

Hello,
I have a assignment to find out when some programs where last executed in the past 2 years or so. My question to the profs here is as follows? What are the possibilities in ABAP to out when a Program (report) was last executed? Is there a function Modul that can give you when a program was last executed? OR is there a table to show you when a program was last executed?
Thank you for your help.
Sabina

Hi,
use the t.code STAT,STAD.
Check in this link for a sample code..
https://forums.sdn.sap.com/click.jspa?searchID=421554&messageID=1488089.
From Table TRDIR also you get the information about Last change.
TRDIR-UDAT ---> Changed On
TRDIR-UNAM ---> User Name
Regards
Kiran Sure

Finding out when an AD user account is deleted

Similar Messages

Maybe you are looking for