Finding transaciton number to skip

Hi -
I want to find a transaction number to skip a transaction from the apply side. I see this in capture side alert log. How I decipher the XIDSQN /transaction number ?
Or is there any other way to find a transaction number ?
C001: large txn detected (1152832 LCRs), xid: 0x0042.018.00012934
Thu Jan 24 14:17:30 2008
C001: large txn committed, xid: 0x0042.018.7f00012934
Thanks.

Many views store the transaction ID as datatype raw. You can convert your XID (in XIDUSN.XIDSLT.XIDSQN format) to raw as follows:
0x0042.018.00012934 ==> HEXTORAW('0042001800012934')
note the slot# (XIDSLT) is typically displayed with only 3 hex digits. So you have to add a zero to the left.

Similar Messages

Can we find the number of rows in table from the dump file

Hi All,
Can we find the number of rows in table from the dump file with out importing the table in to the database?
Please let me know ,if any option is there.
Thanks,
Kumar.

<s>Try to import with option SHOW=Y, that should skip the number of rows which are into a table from a dump file.</s> 
 
Nicolas. 
Oops, sorry, that doesn't show the number of lines... 
Message was edited by: 
N. Gasparotto

SAP buffer for Customer Account Group (number range skipping)

Dear Experts,
When creating new customer for Account Grp = TRDL for my company, I find out that the number range always skip and this problem continues. Someone told me to check it out if the problem might comes from buffer. In Tcode = SNRO (Object = DEBITOR) I find out that buffer setting = 5.
The Question is how can I check if this buffer rate is compatible with my SAP environment? or which rate is more compatible and help solve the problem of number range skipping?
If anybody have some suggestion please feel free to contribute it.
Thank you very much

Hi,
in SNRO, take out the flag for
"Main memory buffering".
SAP recommends:
Dependencies
When buffering number intervals, gaps may result in number assignment. Buffering is therefore not possible for applications, which require continuous number assignment.
What happens is that the system loads consecutive numbers into the buffer, in your case these are five consecutive numbers. When you create customers and do not use all the numbers already in the buffer, the numbers remain open. Example: You start XK01 for customer creation, create three customers and then logoff. You have two open numbers remaining. Numerical example: 1, 2, 3 have been used, 4 and 5 have been reserved, but are open.
When invoking XK01 again after subsequent log-on, the system pulls the next five numbers into the buffer. Since 1,2,3,4,5 were already taken (for the previous buffer), the next buffer goes from 6 to 10.
Numbers 4 and 5 will never be used, the practical consequence of that are the number gaps that you have noticed.
Hope this helps.
Rudolf

Inspection lot number is skipping

Dear friends,
When i create production GRN/purchase GRN, lot numbers are created. But, the sequence is not maintaining. i would like to know what are the conditions by which lot numbers do not follow the sequence ?. What are the customising settings to be done?. I checked in the default values for the inspection type and define inspection types settings. In these two settings, i could not able to find where i have to do the settings for the maintainance of the sequence. At the same time , for the inprocess inspection(insp type 03) the sequence is maintaining.
regards, ebenezer

There are cases that when you create all the required entries for GR, but doenst post a GR, at this case the system will assign a inspection lot number internally and holds it in buffer. If you cancel posting that GR and again after some time
Do the same and post the GR then there will be new number generated skipped one number. This is a common problem.
There may be cases that when you at the last stage of the posting GR then there can be case that power supply is lost or same batch is being accessed by some one or system gets hanged in such cases also the sequence will be skipped.
Hope this helps you.

Number range Skip

Hi Guys,
Sometimes I have found that serial number is not getting followed correctly. One or two number get skipped. Can someone suggest what could be the reason behind that and is there any way to find out the missing numbers?
Regards
Pushpa

Hi Pushpa,
In SD module, the gaps in invoice numbering may be caused normally due
to two reasons:
- update interruptions - the number is set in to the invoice at the
beginning of the program . If an interruption of the process happens
after the assignation of this number, the number has run in the range
and cannot be recovered. Update terminations in transaction VF01 and
VF04. The billing document number is reserved prior to the update.
After a possible update termination, it cannot be used again.
Update terminations are displayed in transaction SM13. At present,
there is no possible solution to this.
- Object RV_BELEG is buffered. In this case the performance is improved
but these gaps are produced.
Note 19050 provides details on why gaps occur, please also refer to the
other attached notes for more info.
I am sorry to tell you that there is no way to solve the gaps or to
'refill' missing invoice numbers.
We know that in different countries you have to explain document gaps
to Legal Authorities, for example Italy. For this reason there is report
RFVBER00 to document gaps occuring due to an update termination.
Report RFVBER00 only lists update terminations that are not older than
50 days (or according to what time is maintained in your system).
So it could be that this log has already been cleared.
It is necessary that these update terminations are documented before
the 50 days expiration period.
A second possibility is that the gaps occur, but NOT due to an update
termination other resons, incorrect customising & user exits etc.
Gaps without update terminations cannot be (easily) explained.
They can be (only) detected via report RFBNUM00. Report RFBNUM00 display
s these document number gaps for the number range object RF_BELEG.
I hope this information helps explain the system behaviour and is
sufficient for your auditing. If you really cannot have gaps in billing
documents you will have to switch off buffering of RV_BELEG.
Thanks & Regards
Roop

How to find serial number without using macbook?

What can be used to find serial number of my macbook outside of using my macbook?
My computer was stolen and I do not have the box nor do I have it registered in iCloud, I know that iTunes holds my computer as an authorized user for my ID so I am sure somewhere it hold the serial number to identify that computer.
I just need to know how to access that information so I may register it in my name so I can have Apple help me track it.

You store purchase receipt, the box it came in, where you wrote that information down.
What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

How to find the number of occurence of a string

String str="The AR tech seeks experienced candidates in java,jsp. The candidates should have atleast 1 year of experience in the specified skills.";
here i need to find the number of occurence of the string "experience".
how to find it out?

String str="The AR tech seeks experienced candidates in java,jsp. The candidates should have atleast 1 year of experience in the specified skills.";
String findStr = "experience";
int count = 0;
int index = 0;
while(index != -1) {
index = str.indexOf(findStr, (count == 0 ? 0 : index + findStr.length()));
if(index != -1) {
count++;

How to find imei number

hi my name is james bowd and i was wondering how to find my imei number/code as i need prof that the iphone is mine
please reply on [email protected] thank you

You should not post your email address in these forums - they're public and it will likely lead to spam.
On your iPhone, go to Settings, General, About, and scroll down. You'll find IMEI number there.
Matt

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to Find PO Number after Importing PO through Interface Table

Hello All,
I am Importing PO through an Interface. now I wanted to find PO Number(Segment1) which has been created.
Please tell how to find PO Number....?
Thanks in Advance
Regards
Ravi Raj.

Got Answer

How to find the number of links in a website

hi every body
can any one clear my doubt
my doubt is that
in a website how to find the number of links the hole website contains
is there any navigation tool to find that
plz help me yar
i am waiting for the reply

If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
Hope this helps.

How to find port number , when there will be different instance number ?

In case of portal url,
port number is 50000 for default instance number 00.
how to find port number , when there will be different instance number , instead of 00?
Thanks

Hi
You can find the port number by your instance number as follows:
There is a general format for the port number like you have mentioned.
For 00 instance the port number is 50000.
The general format for the port number goes like this:
5<instance_no>00
If your instance number is 01 then the port number would be 50100.
It depends on the installation type which you perform.
You can also change the instance number during the installation but normally you dont do this.
If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
Hope this solves your doubt.
If you need some more clarification please lemme know.
Regards
Sumit Jain
**Rewrd with points if useful.

How to find the number of times method being called.....

hi,
can any one pls tell me how to find the number of times the method being called......herez the example....
Refrence ref = new Refrence();
for(int i = 0;i < arr.length; i++){
if(somecondition){
ref.getMethod();
here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

can any one pls tell me how to find the number of times the method being called......
herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

Finding transaciton number to skip

Similar Messages

Maybe you are looking for