Fingerprint login not working when resumning from sleep

Hello,
I changed HDD to SSD and did *fresh* install, not from rescue discs.
Everything is working as expected except except fingerprint login -- instead of logging I got an error:
The computer is locked. Only logged user can unlock it.
Picture
I got this error only when resumimng from sleep/hibernate, I can normaly use FPR when logging right after reboot or if I launch FPR software.
Software were installed via Lenovo System Update, nothing manually, using Lenovo Fingerprint Software v.3.3.2.27
Fingerprints are present from previous enrollment/installation.
Any help appreciated,
Boštjan
Edit: forgot system info -- T500 2056-VL1 with Samsung 830 256Gb, Win 7 x64 Pro SP1

Hey there Boštjan,
Looking over some of the fingerprint reader solutions on the lenovo support site, I saw that they Fingerpring Software for your machine, the T500 Win 7 64 Bit is at version 3.3.2.50. It may be worthwhile trying this update to see if it resolves your issue. Here is the document ID, DS012806, you can put it in the search field and it should pull it up for you. Alternatively here is the web address.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS012806
Good Luck!

Similar Messages

Fingerprint Reader not working upon waking from sleep for windows login

Hello,
I have a brand new T540P with a Validity fingerprint reader.
Rougly 80% of the time, the Fingerprint reader is unresponsive at the windows login screen after waking the computer from sleep. It works 100% of the time when booting from an off position, however. Once logged in, it also works 100% of the time. The issue only arises when logging into windows.
Things I have tried
-uninstalling/installing device in device manager and finger print manager pro software
-setting fingerprints through both fingerprint manager pro software (lenovo) OR through the built in windows fingerprint control panel options
-disabling "allow windows to turn off this device to save power" in device manager.
I should note as well that I have another T540P that I ordered as a replacement. Both models experience the same issue.
Is this a platform wide issue affecting all T540P models? This is frusterating.
Solved!
Go to Solution.

sailoholic
Your report is the first we have ever heard of this issue on T/W. It does not happen on my T/W systems here (with or without 30 Day Standby enabled). The other reports I heard of this problem came from X240.
I just want to confirm with you - the problem happens after coming out of Sleep (and not Hibernate), right?
Can you tell me exactly what you are doing? e.g.
1. Use the computer normally (is AC attached or not?)
2. Close the lid - the computer goes to sleep (or do you go to sleep some other way?)
3. Open the lid 2 hours later (or how long)?
4. are you using a dock?
The more info you can provide, the better. Thanks for your help.
Also please let me know what BIOS version you have.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Fingerprint reader not working after resuming from sleep

I kind of mentioned this problem in a previous post and was directed here http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67245 which is a patch that could possibly fix it.This patch didn't work. What is happening is when my laptop comes back from sleep either the fingerprint reader is unresponsive, it says "waiting..." at the top of the screen instead of the normal scan message and is unresponsive, or in some cases when I click other credentials it shows a third account (first is my account, second is the reader account,and the third is a stop sign thing that says the fingerprint reader isn't attached). When I sign in with my normal password and try to go to the fingerprint software it pops up a little window that is labeled Lenovo Fingerprint 2.0 and the message is "Pleae wait...".
Other then returning from sleep the fingerprint reader has been working fine. Any suggestions are greatly appreciated, thanks.
Edited to add patch link.
Message Edited by Skurvy_Pirate on 09-22-2008 07:40 PM
Solved!
Go to Solution.

Well I got it working again but I'm not exactly sure how. I will go over what I went through so you guys can get an idea and possibly fix it. To start off I talked to MS support and I worked with them for a really long time. They tried intstalling different drivers (other then AuthenTec) and anytime we did that it would say "Fingerprint reader not available" at the login. They tried changing the power settings and which devices could wake up my computer and that had no effect either. I called Lenovo and they basically just told me to download the software that was already on the computer and change the option to have it wake up the computer, which doesn't exist. They were very unhelpful.
What eventualy got it working (and it's been working so far), is uninstalling the driver and software. Then reinstalling it all and installing the patch linked above. The first time I installed it I just double clicked it and went through the installation process. But you need to go into the folder it installs it into (C:\DRIVERS\VISTA\FPIRPON\) and double click FPIRPOn.reg which will add the fix to the registry. On top of this I also went into Device Manager and unchecked the box that allows the computer to turn of the fingerprint reader under Properties->Power Management for the device. The last thing I did was do a registry edit to force the USB to reset when waking from sleep. I found the registry edit here http://support.microsoft.com/kb/928631/en-us.
So I am pretty sure it was the patch that fixed it when I correctly installed it because I had tried both the power management thing to keep it from getting turned off AND the registry edit and it didn't work. I also thing that Vista SP1 fixes what the registry edit does, but I tried it anyways because I was desperate haha. I'm going to undo the registry edit and power management thing one at a time and see if it still works. If it doesn't keep working I'm guessing it's a hardware problem and going to call Lenovo to get it fixed.
Anyone who is having this problem I would suggest they try the patch in the link that I first posted (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67245)and follow the installation instructions carefully. Good luck!

All applications are not responding when wake from sleep.

All applications are not responding when Macbook pro wake from sleep,
the keyboard and touch pad are okay.
Why?
Thanks a lot.

I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
If it does not, that means one of those services that was disabled, is causing the issue.
If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware.
Here are the steps to disable non-critical services:
Windows + Q to bring up Search
Type 'msconfig' and press Enter
Click the Services Tab
Check the Hide All Microsoft Services box
Click the Disable All button
Click Apply and Restart
Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
Let me know the results when you get a chance, please

Ethernet not connecting when resuming from sleep/hibernate

I use my mac (Win7) in clamshell mode quite often, and I leave the cables connected (ethernet, power, display, etc). I have noticed since installing the 3.0 Boot Camp drivers that the ethernet connection is not recognized after resuming from sleep/hibernate. I need to disconnect the cable and re-plug it in for the system to recognize the network. Anyone else seeing this?

Look through Power Options for sleep and network. There should be sleep, low power, etc. And if possible, maybe you can manually update drivers from the vendor (not Apple). And if Windows or your update doesn't work as well, then you can just as easy use Device Manager and "rollback" the last driver upgrade - a great feature. Also, use those Create/Restore Check Points.
I use to have trouble, got tired of having this issue, and bought a new modem to replace my 5 yr old model. Problem gone. Same can happen regarding routers, sometimes a firmware update, but I had one router that had been superceeded by 4th generation and no firmware patch anymore.

Keyboard & Mouse Not Working on Resume From Sleep

About 1/10 of the time when I resume from sleep my keyboard and mouse do not work. They wake the computer (a 27" iMac) but do not work any longer past that, requiring me to hard reboot my computer (holding the power button to turn off then rebooting).
I have no issues using my keyboard and mouse, both bluetooth, at all. When this happens, even hooking up an external keyboard does me no good as it also does not work. Sleeping and reawakening does no good either.
Anyone have any ideas? So far nothing seems amiss when it comes to my configuration or hardware. Thanks in advance!

I have experienced the same problem which affects a 3rd party USB mouse and my wireless trackpad. Both may be unresponsive when the computer (late 2009 21.5" iMac) wakes. When it happens both devices are affected, never just one of them.
I don't need to reboot to fix the problem. The mouse responds by disconecting and re-connecting. The trackpad reconnects by holding its power button for a few seconds.
The problem does not affect my wireless keyboard.
No clues on the Console. Sorry I can't be more help.

Wireless not working after resume from sleep, T440s

Some times when I resume laptop from SLEEP, wireless are not working...
Solved!
Go to Solution.

Try new drivers. Helped me a lot.
http://ns3369637.ovh.net/index.php/outils/Drivers/Intel/Wlan/PROSet-Wireless-WiFi-Software/Intel-PRO...

Powershell unzip with shell.application not working when launched from windows service

I have a deployment agent on a machine implemented as a windows service. Service is 32-bit and runs on windows server 2008R2 x64 SP1 with powershell V2. Powershell script requires elevation and to run under x64 because of dependency to powershell module
'IIS Administration'. To achieve this, the service starts a cmd file which in turn launches powershell x64 console:
C:\WINDOWS\sysnative\WindowsPowerShell\v1.0\powershell.exe "Start-Process C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell -ArgumentList '-ExecutionPolicy Bypass -NoLogo -NonInteractive -NoProfile -File C:\Temp\EndJobCmd\Install.ps1' -Verb RunAs"
This seems to work well. The problem I have is that the script has a sequence where it unpacks a zip file to a destination folder using shell.application, this works fine when triggered manually on the server or through the task scheduler, but when triggered
from the service it does not extract any files at all (cannot see any errors thrown by the script but it seems to continue to execute as it logs a successful message to the event log after finishing).
Unzip sequence looks like:
$shell = New-Object -com shell.application
$pkg = $shell.namespace($sourceFile)
$installDir = $shell.namespace($targetDir)
$installDir.Copyhere($pkg.items(), 20)
Any advice greatly appreciated. I have searched some and seen a few people with similar issue but have yet to find a solution.

If it's still actual, I managed to fix this with having CopyHere params equal 1564.
So in my case extract zip function looks like:
function Expand-ZIPFile{
param(
$file, $destination
$shell = new-object -com shell.application
$zip = $shell.NameSpace($file)
foreach($item in $zip.items())
$shell.Namespace($destination).copyhere($item,1564)
"$($item.path) extracted"
1564 description can be found here - http://msdn.microsoft.com/en-us/library/windows/desktop/bb787866(v=vs.85).aspx:
(4) Do not display a progress dialog box.
(8) Give the file being operated on a new name in a move, copy, or rename operation if a file with the target name already exists.
(16) Respond with "Yes to All" for any dialog box that is displayed.
(512) Do not confirm the creation of a new directory if the operation requires one to be created.
(1024) Do not display a user interface if an error occurs.

Managed Attachments - I/PM is not working when called from EBS

Hi.
When we click on "Managed Attachments" I/PM login screen should be populated. It was working fine before... Today, it is not working as expected. The following exception is coming in I/PM console logs...
*<Dec 18, 2011 5:00:23 PM GMT+04:00> <Error> <oracle.wsm.policymanager.bean.util.PolicySetBuilder> <BEA-000000> <The policy referenced by URI "oracle/wss_username_token_ service_policy" could not be retrieved since Policy Manager is not deployed. oracle.wsm.policymanager.PolicyManagerException: WSM-02054 : Failure in looking up EJB component DocumentManager#oracle.wsm.policymanager.bean.ejb.IRemoteDocumentManager.*
Caused By: javax.naming.NameNotFoundException: While trying to lookup 'DocumentManager#oracle.wsm.policymanager.bean.ejb.IRemoteDocumentManager' didn't find subcontext 'DocumentManager#oracle'. Resolved ''; remaining name 'DocumentManager#oracle/wsm/policymanager/bean/ejb/IRemoteDocumentManager'
I think its the problem with Security Providers... We are using the default only... not using any LDAP etc... when we check in Enterprise Manager it is showing the store type as FILE for "Policy Store", "Credential Store", and "Key Store"....
The same exception is coming when we test the webservices under Imaging deployment in Weblogic Console...
Not sure how to crack it...
Anybody please help!!

The issue has been resolved by configuring Oracle Web Service Manager security policy as per the doucment 1332250.1
Oracle Web Services Manager (OWSM) is necessary for applying WS-Security headers to UCM web services. The WebLogic domain that UCM/IPM runs in must have OWSM installed in order for this to work. OWSM can be selected upon domain creation, or added to a domain by extending the domain.

HR_INFOTYPE_OPERATION not working when called from Dynamic action

Hi ,
       Senario : I would like to execute a form from dynamic action which
creates a record in 0015 (Additional payment IT) .
       I have writen the code as shown below am using FM HR_INFOTYPE_OPERATION
. When i execute the program from se38 it is creating a record, however it is
not created when it is called from dynamic action..when i debugged the code in
inside the FM HR_INFOTYPE_OPERATION there is a FM HR_MAINTAIN_MASTERDATA where
they are using call dialog (statement) and
sy-oncom = 'N'   when called from Dynamic action and
sy-oncom = 'S'   when called executed directly.
I tried to change the sy-oncom to S while run from Dynamic action it created
the record.
So Can anyone explain me abt sy-oncom and how can i resolve the issue..
code..
REPORT ZHRPYENH01 .
perFORM TERMIATION_9000.
INCLUDE DBPNPMAC.
      FORM Termiation_9000                                          *
FORM TERMIATION_9000.
INFOTYPES : 0015.
*data : i .
*i ='c'.
*break-point.
*message i000(000) with i.
TABLES : PRELP.
DATA : P9000 TYPE PA9000." with header line.
DATA : P0000 TYPE STANDARD TABLE OF P0000 WITH HEADER LINE.
DATA : P0015 TYPE STANDARD TABLE OF P0015 WITH HEADER LINE.
DATA : HIRE_DATE LIKE SY-DATUM,
         TERM_DATE LIKE SY-DATUM.
DATA : MOLGA LIKE T500L-MOLGA VALUE '25',
         SEQNR LIKE PC261-SEQNR.
DATA : RGDIR TYPE STANDARD TABLE OF PC261 WITH HEADER LINE.
DATA : ACTUAL_PERIOD LIKE PA9000-RETENTION.
DATA : PNP-SW-FOUND TYPE SY-SUBRC ,
         PNP-SY-TABIX TYPE SY-TABIX.
DATA : TER_PERNR LIKE PA0001-PERNR.
DATA : REF_PERNR LIKE PA0001-PERNR.
data : key type BAPIPAKEY.
data : payed_amount type p0015-BETRG.
data : future_payment_amount type p0015-BETRG.
data : p0002 like pa0002.
types : begin of t_deduction ,
          deducation_date like p0015-begda,
          future_payment_amount type p0015-BETRG.
types : end of t_deduction.
data : future_deduction type standard table of t_deduction with
*header line.
data : future_deduction type t_deduction .
data : RETURN type BAPIRETURN1.
*data : deduction_p0015 like standard table of p0015 with header line.
data : deduction_p0015 like p0015 .
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
****Prepare 0015 data for deduction
*deduction for payed amount
clear deduction_p0015.
*refresh deduction_p0015.
deduction_p0015-pernr = REF_PERNR.
*deduction_p0015-pernr = TER_PERNR.
deduction_p0015-lgart = 'M120'.
deduction_p0015-begda = sy-datum + 1 .
deduction_p0015-endda = sy-datum + 1 .
deduction_p0015-BETRG = payed_amount.
deduction_p0015-WAERS = 'SGD'.
deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
**deduction for future payment amount
*loop at future_deduction.
*clear deduction_p0015.
*deduction_p0015-pernr = REF_PERNR.
**deduction_p0015-pernr = TER_PERNR.
*deduction_p0015-lgart = 'M120'.
*deduction_p0015-begda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-endda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-BETRG = future_deduction-future_payment_amount.
*deduction_p0015-WAERS = 'SGD'.
*deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
*endloop.
Create a deduction wage type in 0015 for the employee
break-point.
CLEAR RETURN.
CALL FUNCTION 'BAPI_EMPLOYEET_ENQUEUE'
EXPORTING
    NUMBER              = REF_PERNR
    VALIDITYBEGIN       = '18000101'
IMPORTING
   RETURN              = return
if not return is initial.
message E000(000) with
'Referred Employee could not be locked for referal payment deducation,
please try after some time'.
endif.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    INFTY                  = '0015'
    NUMBER                 = REF_PERNR
   SUBTYPE                = 'M120'
OBJECTID               =
LOCKINDICATOR          =
   VALIDITYEND            = SY-DATUM
   VALIDITYBEGIN          = SY-DATUM
RECORDNUMBER           =
    RECORD                 = deduction_p0015
    OPERATION              = 'COPY'
TCLAS                  = 'A'
   DIALOG_MODE            = '2'
NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
IMPORTING
   RETURN                 = return
   KEY                    = key
break-point.
COMMIT WORK.
if not return is initial.
*return-TYPE
*ID
*NUMBER
*MESSAGE
message I000(000) with return-MESSAGE.
endif.
CALL FUNCTION 'BAPI_EMPLOYEET_DEQUEUE'
EXPORTING
    NUMBER              = REF_PERNR
    VALIDITYBEGIN       = '18000101'
IMPORTING
   RETURN              = return
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
Thanks and regards
-Senthil Bala
Message was edited by: senthil bala

Hi Senthil
Why at all U want a subroutine to create a record in IT0015 through Dynamic action.There are some standard codes available to update infotypes.
Let me give U an example
14     9CON     BETRG     4     2     I     INS,0015 This will create a record in IT0015 when IT0014 is updated with Wagetype 9CON
14     9CON     BETRG     4     3     W     P0015-LGART='5400' Set wagetype for IT0015(Here U can use a subroutine call to set the wagetype)
14     9CON     BETRG     4     4     W     P0015-BETRG=P0014-BETRG set amount for IT0015(Here U can use a subroutine call to get the amount)
14     9CON     BETRG     4     5     W     P0015-BEGDA=P0014-ENDDA set the dates(Here U can use a subroutine call to set the dates)
Hope this will help U.
Please award points if helpful

Open Form not working when called from When-Mouse-Click

In our application to navigate to other forms we have created a feature where user selects the Forms from a LOV, the form id is returned to the text item and user needs to click the text item.....In the text item the Open form command is given
This is not working
The form builder throws an error
Frm 92100 Connection interupted
what could be the reason

Code written in When-Mouse-click
for item :boo_toolblk.nbt_nxtscr which contains the form id
DECLARE
p_name_id PARAMLIST;
lv_param_name VARCHAR2(8):= :boo_toolblk.nbt_nxtscr;
lf_next_form_id FORMMODULE;
BEGIN
Clear_Item;
/*Create a parameter list named 'TEMPLT_PARAM'. First
** make sure the list does not already exist, then
** attempt to create a new list*/
IF not Id_Null(Get_Parameter_List('TEMPLT_PARAM'))/*Returns a BOOLEAN value if the object ID is available*/
THEN Destroy_Parameter_List('TEMPLT_PARAM');
END IF;
p_name_id:= Create_Parameter_List('TEMPLT_PARAM');
/*Add a value parameter to an existing Parameter
** List */
Add_Parameter(p_name_id,'templt_nxtscr',TEXT_PARAMETER,lv_param_name);
Go_Block(Get_Form_Property(:system.current_form,FIRST_NAVIGATION_BLOCK));
lf_next_form_id := FIND_FORM(lv_param_name);
:PARAMETER.next_form := lv_param_name;
IF lf_next_form_id.id is not null
THEN
Close_form(lf_next_form_id);
END IF;
Add_parameter(p_name_id,'previous_form',TEXT_PARAMETER,:SYSTEM.CURRENT_FORM);
/* opens another form*/
Open_Form(lv_param_name,ACTIVATE,NO_SESSION,SHARE_LIBRARY_DATA,p_name_id);
EXCEPTION
WHEN FORM_TRIGGER_FAILURE
THEN RAISE FORM_TRIGGER_FAILURE;
WHEN OTHERS
THEN RAISE FORM_TRIGGER_FAILURE;
END;
Error :-
Frm-92100 : Your Connection to the Server was Interrupted
This may be the result of a networn error or a failure on the server.
You will need to re-establish

Component Slider not working when loaded from another swf file

I have a simple Flash application that uses a component Slider to increase or decrease the size of the text in a TextArea (ta). It works perfectly fine on its own, however, when I try to load the same swf file from another application, I get the following error...
ReferenceError: Error #1069: Property fl.managers:IFocusManager::form not found
on fl.managers.FocusManager and there is no default value.
at fl.controls::Slider/thumbPressHandler()
Code...
import fl.events.*;
import flash.text.TextFormat;
ta.text = "Lorem ipsum dolor sit amet";
var tf:TextFormat = new TextFormat();
tf.color = 0xCCCCCC;
tf.font = "Trebuchet MS";
tf.size = 12;
slider.addEventListener(SliderEvent.THUMB_DRAG, sliderChange);
style();
function style():void
    ta.setStyle("textFormat", tf);
function sliderChange(e:SliderEvent):void
    tf.size = slider.value;
    ta.setStyle("textFormat", tf);
Could the containing swf file that I'm loading the slider swf file in anyway effect the slider application? I don't quite understand why it works on its own, but not when loaded from another app.

add a slider component to the main (loading) swf's library.

Mail mac disconnected and not working when mac back sleeping

I have a problem with my mail app on imac and Mountain Lion installed.
when the mac goes in sleep mode, if the mail app was open,, on wake up all the accounts are disconnected and clicking the "connect the accounts" not working.
To fix it I have always to close and open again the mail app for connect the accounts.
With Lion this not happen.
Any help?
Regards
Michele

I have one other totally off the wall thought. OK educated guess, based on the fact that my day job involves writing file systems for other operating systems.
I have seen implementations where file timestamps are not written to disk until they absolutely need to be written. Until it is needed, the fact that the file has been touched is kept in memory.
Now I have only seen situations where it is the *Access Time* that is treated this way, NOT the *Modification Time*. The touch command modifies the Modification time by default. However, I do not know how the Mac OS X HFS+ file system deals with updating the on-disk timestamp values.
One thing you could try. Instead of using touch, use the date command redirected to a file on the target disk
0-59/12 * * * * date >/Volumes/MyHardDrive/.nospin.txt
This will give you verification of when the cron job last ran and do more than just touch the Modification Time on the file.
Or if you want a record of every time the cron job ran, change the > to >>
0-59/12 * * * * date >>/Volumes/MyHardDrive/.nospin.txt

Workstation Bridge not working when Updating from 10041 to 10049

I am using Workstation 11 on a Windows 8.1 Host
All works well including Bridge network connections
I loaded Windows tech Preview 10 version (before 10041)
All worked apart from the Bridged network connections when using VMware workstation 11
Then there was an update to 10041 and the bridged connection started to work but you could not access the physical network card on the host...some error
Then somewhere the new update version was installed on my machine to version 10049
Now I cannot configure bridge mode in my VMware workstation 11 it tells me there sre no un bridged host insdtsalled and when I look at the physical network card there are no protocols installed.
Looks like I will have to go back to windows 8.1 pity
When one thing is fixed another is broken

I too has the same issue and I apprently tried to revert to 10041 from 10049 and it did not work.
But I tried to these and it worked for me. I stopped all the VM's and in vmware networking removed all the adapters.
Then tried to run the vmware 11 (latest) setup again and when it asked to install I choose repair and it did repaired and reinstalled the networking and after that I tried to create new virtual adapter and it worked and vm can able to browse internet.
VM

Fingerprint login not working when resumning from sleep

Similar Messages

Maybe you are looking for