Fiori gateway deployment for SRM
Hi
Been trying to figure out how the gateway deployment for the SRM fiori apps should be.
All through the SAP help for Fiori I see that the SAP recommended method is a Central Deployment. And some other SAP docs say that the deployment is SRM independent
But I also see that for the SRM UI addon is a prereq for SRM Fiori and that the UI addon needs a local deployment of the gateway.
So does that mean for SRM Fiori we would need a local gateway instance.
So if I were to use ECC and SRM Fiori I would need two separate Gateway instances?
Can some one advice?
Thanks
Vishakh
Hi Masa
Thank you for your response
Understood. But SRMNXP is a prereq for SRM Fiori. And SRMNXP needs a local deployement. And Fiori reuses these gateway services.
So indirectly, logic would mean that I use the local deployment for the Fiori as well.
So the the choice between local and hub doesn't really hold good for SRM right?
If I were to say already have a hub deployment for ECC. And i need to start using the SRM Fiori apps.
a. Is there any way I can reuse the central deployment for the gateway or in other words what would be the best way or only way forward
b. If i were to have say only Approve shopping carts, i assume SRMNXP is not a pre req and hence I can use the central gateway and install the front end components on it?
c. If i were to use the other two apps I would need to have SRMNXP. In this case would I install the UI components locally or the central hub?
Hope the questions make sense. I cant really get around the fact that even though SRMNXP is mandatory for two of the apps and the SAP Help on Fiori says so.. there is no tip on how to handle a situation where someone would deploy both the ECC and SRM Fiori and how the gateway deployment would be then. Does it then make sense that you have a central hub solely for the ECC apps (unless we are using some other suite component that doesn't have a prereq like SRMNXP for SRM) ?
Thank you for the patient reading.
Similar Messages
-
Availability Date for SRM 7 EhP1
Hi
does aybody have information about release dates of SRM 7 EhP1? Has ramp-up already started? Desperately waiting for some functionality promised with EhP1 like parallel approval for BRF workflow.
Regards
CarstenHi carsten
All core applications of SAP BUSINESS SUITE 7 INNOVATIONS 2010 are synchronized on a common release-to-customer date and constitute the stable core.
Enhancement packages deliver continuous innovation for this stable core. SAP BUSINESS SUITE 7 INNOVATIONS 2010 is based on Enhancement Packages for SAP CRM 7.0, SAP ERP 6.0, SAP SRM 7.0 and SAP SCM 7.0.
Key Data
Planned Release to customer: Second Half of December 2010
Planned Completion date Ramp-Up: Q2, 2011
How to apply for Ramp-Up in Q4/2010?
Customers: Please contact the pertaining point of contact below for further information
Learn about the new solutions (using the link to the solution page below)
Get in touch with your Account Executive / Customer Engagement Manager
but SAP has some big plans to satisfy the customers via EHP1
https://websmp107.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000730505&
please contact appropriate region contact manager in the above link.
i could not see any info on product availablibility matrix for EHP1 for SRM
P_SRM_71 - SAP Certified Application Professional - SRM with SAP SRM 7.0 EHP1
Supplier collaboration with Portal, SUS and ROS +
Implementation scenarios, system landscape and combined Business Suite roles +
Self-Service Procurement +
Service Procurement + Plan-Driven Procurement +
Operational sourcing in SRM and ERP +
Catalog Integration and concept in SRM and ERP (SRM-MDM and Punch- Out) +
Strategic Sourcing with SRM and E-Sourcing +
Contract Management in SRM, CLM and E-Sourcing +
Portal Integration +
Master data and product category concept and replication ++ ERP, SCM, PLM and Financials integration including ERP-MM configuration ++
Approval concepts and possibilities with SRM, ERP and SAP NW Portal +
Roles/Authorizations, UI configuration, WebDynpro Basics + and Flexible Deployment Variants "
SRM MDM Catalog +
System communication and ERP integration +
Application Monitoring/Troubleshooting/ Reporting +
User management and organizational structure +
Workflow configuration: Process- & Application Controlled WF +
Muthu -
NAC Problem_In-Band Virtual Gateway deployment
we deployed In-Band virtual gateway deployment..
the users connected to untrusted Vlan and took IP address from DHCP where it configured on ASA that is connected to trusted interface but no one can reach to the gateway " IP address of the firewall" and when we open any browser not redirect to web login page and we don't have local DNS and we use global DNS..
Note: we used HP switches..
Please support me ASAP..
BR,
Saad EidI have not found any either. You can use the one for VPN since it will be the same.
http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a008074d641.shtml -
EP configuration for SRM 7.0
Hi,
We have EP 7.0 installed at our place.
We recently installed SRM 7.01 at our place.We have the SSO configured between EP and SRM.
Howvere now we want to run the SRM 7.0 transactions in EP.What is the process for doing that?
Also even if we need to customize the iviews for SRM transactions in EP,iniitially is it mandatory to install the standard content provided by SAP and then customize the EP roles/views as per our needs?
Is there any config guide available to map SRM roles and EP roles ?
Please advise.Hi NMSRM,
When you say transaction you mean SAP T-code? If that so, you have to create a transaction iView with your SRM as system object and it will work.
The best practice to fully utilize SRM7.0 from portal is to deploy SRM7.0 Business Package into portal. Once that is done there are standard portal roles for SRM which you can use else you can extend it.
The advantage is it uses BO which allow you to handle lot many features.
Hope this helps
Regards
Prashil
Edited by: Anja Engelhardt on Jul 22, 2011 8:29 AM -
Advantages and disadvantages for SRM on one client with ECC
Dear SAP gurus,
We are evaluating the use of SRM on one client with ECC. Is there a paper spesifally discuss the advantage and disadvantages of having this deployment option?
Best regards,
JohnHi
check this link
SRM Server as an Add on to ERP 2005
Advantages
1) one backend for SRM and ECC6.0
Disadvantage
1.Sourcing scenario cannot be implemented.
2.It does not support multiple backend system.
Regards
G.Ganesh Kumar -
Just FYI, new Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide
New! Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide
This new guide is available on the Web at
http://technet.microsoft.com/en-us/library/dn641937.aspx. It is also available for download in Word format at TechNet Gallery at
http://gallery.technet.microsoft.com/Windows-Server-2012-R2-37eb8e17
If you work for a Cloud Service Provider (CSP) or an organization that's planning on deploying cloud technologies, you might be interested in the new Windows Server 2012 R2 RRAS Multitenant Gateway Deployment Guide.
You may already know that in Windows Server® 2012 R2, the Remote Access server role includes the Routing and Remote Access Service (RRAS) role service. (It also includes DirectAccess and Web Application Proxy, however those role services will not be discussed
in this article.)
The new deployment guide demonstrates how to use Windows PowerShell to deploy RRAS as a virtual machine (VM)-based multitenant software gateway and Border Gateway Protocol (BGP) router that allows CSPs and Enterprises to enable datacenter and cloud network
traffic routing between virtual and physical networks, including the Internet.
You can use the gateway with VM networks by using either Hyper-V Network Virtualization or Virtual Local Area Networks (VLANs) - but using Network Virtualization is recommended due to VLAN limitations such as difficult management and a limited number of
available VLAN IDs.
If you're using System Center Virtual Machine Manager (SC VMM), you can use SC VMM to deploy Windows Server Gateway; however even if you are using SC VMM, you can manage the gateway with the same Windows PowerShell commands that are used for the RRAS Multitenant
Gateway. (Some Windows Server Gateway features are configurable only with Windows PowerShell.)
For information on deploying Windows Server Gateway with SCVMM, see the Test Lab Guide: Windows Server 2012 R2 Hyper-V Network Virtualization with System Center 2012 R2 VMM, at
http://www.microsoft.com/download/details.aspx?id=39284
With the RRAS Multitenant Gateway, you can create site-to-site VPN connections between your tenants' physical locations and your cloud datacenter. You can also provide tenants with point-to-site VPN connections that allow tenant Administrators to access
and manage their VM resources from anywhere. The RRAS Multitenant Gateway also allows you to configure Network Address Translation (NAT), so that tenant VMs can access the Internet, and you can deploy dynamic routing by configuring the gateway and tenant gateways
with BGP.
Thanks -
James McIlleceHi,
It is very useful , thanks for your sharing .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Best Practices for SRM Installation !!
Hi
can someone share the best Practices for SRM Installation ?
What is the typical timeframe to install SRM on development server and as well as on the Production server ?
Appericiate the responses
Thanks,
ArvindHi
I don't know whether this will help you.
See these links as well.
<b>http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
http://help.sap.com/bp_scmv150/index.htm
http://help.sap.com/bp_biv170/index.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul -
Remote Desktop "Bypass RD gateway server for local addresses" no longer working in Windows 8
Hi,
After installing windows 8, it seems like the "Bypass RD gateway server for local addresses" is no longer working.
In Windows 7, when the option is checked, I could have the server name set always and the client will automatically detect whether to use the RD gateway or not. For example, from my house, if I am connecting to a computer at my work, which requires
the RD gateway, it will automatically pops up the dialog for authentication method. However, if I connect to a computer in my home network, it will just automatically connects without asking authentication for the RD gateway.
However, after installing windows 8, this does not seem to work as expected anymore. The option is checked but the Windows Security dialog pops up in both situations and so i have to either save the rdp file locally and pin it to the taskbar or switch between
disabling and enabling the RD gateway whenever I need to connect to different machines.
Is this a regression in Windows 8? Is anyone else experiencing the same issue?
ThanksAnother way to resolve this issue for me, beside of configuring RDP to connect directly to server also on unmanaged network, will be to turn the "wifi" subnet in a managed network, as the "wired" subnet is.
The differences between thoses to subnets, dynamically assigned by the same DHCP server, are:
The "wifi" is in a private IP range, the "wired" is in a public IP range
There's an ACL on the "wifi" subnet, not on the "wired"
The next step is to compare frames send/received when on the two networks. Something will likely tell for the network to be managed.
Beside, I'm still searching informations about NLA, which is responsible for setting a nework as managed or not.
Here are some clues:
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
http://social.technet.microsoft.com/Forums/windows/en-US/49ea0a6b-9c03-407d-8e26-24a92849a282/network-location-awareness-signature?forum=w7itpronetworking
If anybody has official MS informations about NLA (A for Awareness and not Authentication), please share! -
Automitic source of supply assignment in backend system for SRM
Hello Experts,
I am facing one issue regarding source of supply for SRM purchase Requisitions in backend ECC system.
When we create a shopping cart in SRM 5.0, a purchase requisition is created in backend and has source of supply assigned to it.
I donu2019t want to assign source of supply to purchase requisitions created for SRM.
Can you please suggest how to achieve this?
Also I think, SRM is internally using BAPI u201CBAPI_REQUISITION_CREATEu201D from backend ECC system for creation of requisition. This BAPI has an importing parameter u2018AUTOMATIC_SOURCEu2019, and if we pass space to this parameter, it creates requisition without assigning source of supply.
If this is correct, then can I use any BADI or customization in SRM to set the value of this parameter as space when SRM calls this BAPI?
Thanks in Advance.
Thanks and Regards,
SanjaySPRO--> SRM > SRM server> cross application basic settings --> Define objects in backend system (PR,RS,PO)
waht is the settings you maintained for your product category / purchase group - external procurement .
the above setting determines your follow on documents in the backend systems.
as discuused in the thread are you using any BADI ?
Unable to create PO in backend system for a text material in Shopping cart
peter offers how to debug to ..in the above link.
br
muthu -
Goods Movement Not allowed(XWAOK) check box - for SRM Reservations.
Dear Experts,
We are working on Extended Clasissc sceanrio however certain materails we are creating reservation switching from ECS to Classic Scenario. System is Creating Reservation successfully in backend but Goods movement reservation allowed (FIELD XWAOK) check box not checked only for SRM Reservations
Please note that ECC reservations checking this checkbox automatically based on Configuration. Is there any setting we have to do in SRM to pass the check box value to ECC? or How Can i check what data is passing from SRM to ECC......
Thanks
RaviDear Ravi,
Could you please check if you have added the value '201' against the attribute movement type (forgot the attribute name) for the purchasing group or user group who created the shopping cart in SAP SRM. Once you have added the attribute, the problem should be resolved.
Thanks and regards,
Ranjan -
Best Practice transport procedure for SRM-MDM Catalogue repositories change
Hi,
I have a question regarding SRM-MDM Catalogue repository change transports.
We currently have two QA servers and to Production servers (main and fail-over).
We are investigating the need of a Development server.
Changes are being made to the repositories on the system, and I see the need of a dev server.
What is best practice for SRM-MDM Catalogue?
With only QA and Prod environments I guess Repository schema transport is the best option, since there has not been created a Refference file (which is needed for change file transport).
Any other options?
We are running MDM as well, with dev, QA and prod environments. Here we use CTS+ for transports.
Is it best practice to use CTS+ also for SRM-MDM Catalogue transports?
KR,
ThomasHi Thomas.
What is best practice for SRM-MDM Catalogue?
SAP recommends to have the landscape model like DEV-QA-PROD.
So in case of catalog as well if we follow the same technique it will help you to have a successful implementation
Any other options?
As a part of proceeding with the CTS+ you need to create a reference file
Refer the Link: [CTS+|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0dd1ae0-36e5-2b10-f8b4-e6365e643c0b?quicklink=index&overridelayout=true] for more details
Is it best practice to use CTS+ also for SRM-MDM Catalogue transports?
It is upto the requirement. if you feel there are many changes in catalog xml schema in various phases in an automatic manner then you can go ahead with CTS+ or you can perform the existing method of exporting and importing the schema to the repository.
Hope it helps.
Best Regards
Bala
Edited by: chandar_sap on Sep 28, 2011 12:17 PM -
SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?
Hello experts,
i've a question concerning the SRM "one-client" installation on ECC 6.0 EhP4 as Add-On.
Is it possible to use SRM and ERP funtionality in a single client e.g. 001?
Or do we have to use different clients on the system like for SUS?
I haven't found any information regarding this topic in SAP ressources. I'm currently using CG "SAP SRM on One Client in
SAP ERP" Release date 2008 (found on marketplace/srm-inst --> srm7.0); SRM - Technical Basis Configuration (BuildingBlock S00/S03). I'm facing problems while going through the following customizing steps:
Assign logical System to Client [both logicall systems are on the same client (001)] ==> error while trying to reference the second logical sys. because client (001) cannot be used again (own presumption: error message differs)
I've seen that some of you have successfully installed and customized this szenario. If someone could provide me any helpful information or guideline how to proceed in general... would be great...
Best regards,
PATRICKThanks for your reply. I've checked the offline documentation because i've no access to solman.
There is a document which describes the steps for configuring one-client customizing on marketplace.
Link: [SAP SRM 7.0: SAP SRM on One Client with SAP ERP|https://websmp203.sap-ag.de/~sapidb/011000358700001201562009E]
The problem is that its impossible to cofigure the system like it's described in the document.
Let me explain why...
SRM Addon is installed and customizing is done in client 001 (same client as erp)
overview about defined logical systems:
-ONECLNTERP (for ERP is defined)
-ONECLNTEBP (for SRM is defined)
When I try to assign the logical system to client 001 it works for the first entry
for the second log. system it shows up an error message.
-->I assume because client 001 has been already assigned. I cant use client 001 again.
But One-Client szenario schould be possible in a single client or is SAPs One-Client more like One-System with differnet clients for SRM and ERP on the same machine?
Because of the above mentioned problem I assume that it's impossible to run ERP and SRM in the same Client number.
Am I right? Do I have to use two Clients on One System for proper Customizing?
Or if it's possible to use a single client on one machine for both ERP and SRM how is it possible to assign two log. systems to one client number?
I'm totally confused. Any help would be appreciated - any tips/hints/experiences from someone who has customized One-Client?
BR, Patrick -
Business System not reflecting the XI Content for SRM
Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven -
How to setup the portal with the uniform style for SRM + Esourcing?
how to setup the portal with the uniform style for SRM + Esourcing? We will setup SRM 7 + esoourcing + portal, but as we know esourcing screen style is not same with SRM, so how to uniform the style between this 2 diffirent software? any body have idea?
Hi,
SAP E-Sourcing 6.0 is the solution. It is same look&feel.
Regards,
Masa -
Dear All
I have requirement in that i need to create blocked invoices for SRM PO's . I have created a PO in SRM portal . Now the invoice need to be done at R3 side but i am not aware how i can create a invoice for the SRM PO's .
Any one help me on this .
Regards
Sunanda
Edited by: SMABAP on Dec 31, 2008 7:36 AMHi,
please check whether your PO has sent to R/3 system or not . if it is there in R/3 then please create a PO with MIRO transaction.....
Before creating the invoice please check whether vendor has GR based invoice vertification or not...
if you are not able to do then ask your FI team to do this....
Thanks
Ravi
Maybe you are looking for
-
Error message on trying to upgrade to QT 7.3 for Tiger
When I download the update, in the process of installing I get an error message. I have trashed the file and downloded again with the same results. What gives? Any Ideas?
-
Using Proposed Fields - Flat File to DataSource rather than InfoObjects
Hi Experts, We are doing one test project in which our source data is Flat Files. We want to load into DSO and InfoCube. Then our next step will be MultiProvider and produce reports on MultiProvider. Can you please clarify? From Flat File to DataSour
-
Retake Quiz results not updated by LMS
Does Captivate 7 send out a score update every time a test is taken (through a SCORM 1.2 LMS server)? I have the following situation Quiz failed on first attempt As designed, module presented trainee with retake offer. Trainee passes quiz LMS score d
-
Hi all We're running Outlook 2010 SP2 on W7 SP1 64-bit and getting this error when clicking the "Reply with meeting" button:- The same error occurs whether we click this button when the message is closed or open and when we untick "close original mes
-
What will Time machine do after complted uninstal of OSX?
If I completly remove OSX from the machine, format the drive, then do a brand new install of OSX, on the new install, if I hook up my time capsule and run time machine I can re-load specific folders from my old (1st) install? Also I used bootcamp to