EP configuration for SRM 7.0

Hi,
We have EP 7.0 installed at our place.
We recently installed SRM 7.01 at our place.We have the SSO configured between EP  and SRM.
Howvere now we want to run the SRM 7.0 transactions in EP.What is the process for doing that?
Also even if we need to customize the iviews for SRM transactions in EP,iniitially is it mandatory to install the standard content provided by SAP and then customize the EP roles/views as per our needs?
Is there any config guide available to map SRM roles and EP roles ?
Please advise.

Hi NMSRM,
When you say transaction you mean SAP T-code? If that so, you have to create a transaction iView with your SRM as system object and it will work.
The best practice to fully utilize SRM7.0 from portal is to deploy SRM7.0 Business Package into portal. Once that is done there are standard portal roles for SRM which you can use else you can extend it.
The advantage is it uses BO which allow you to handle lot many features.
Hope this helps
Regards
Prashil
Edited by: Anja Engelhardt on Jul 22, 2011 8:29 AM

Similar Messages

  • Solution manager configuration for SRM

    Hi all
    we are goin to configure SAP SRM 5.0. we need to configure standard business scenarios in solution manager for the same.can somebody provide relevant links and documents regarding where to find these in solution manager and how to go about this?this would be really helpful.points would be awarded immediately.

    Hi Harsa,
    Here you can find the Webex recorded sessions
    https://websmp207.sap-ag.de/~sapidb/011000358700000429402008E
    Hareesha

  • SRM alert configurations for SUS ASN not created in SRM SUS system

    Hi All,
    We are trying to configure the SRM ASN alerts with the alert category SRM_SUS_AVIS ( Alerts for ASN-SUS) by the same way we did for the SRM_BID_INV for bidinvitation in different client and scenario.
    Is the configuration for SUS anyway different than EBP? ( I have posted another thread for bid alert doubt and later it was configured and working fine sometime ago)
    If the config for SUS ASN alert is different then what is that?
    With our configurations in SLAERT and ALRTCATDEF, and thru RSALERTTEST job we are getting alerts for PO not viewed and Order confirmation not created.
    But we are not able to get alerts for ASN  not created.
    Can anyone throw some light on this please?
    Best regards,
    Sridhar

    Vendor data is maintained in table CRMD_PARTNER only when transactional documents exist for the vendor.

  • Help on Business Scenario Configuration Guide for SRM Server 5.5

    hai friends
    where can i get Business Scenario Configuration Guide.for Version SRM server 5.5
    i found for 4.0 and 5.0 but not for 5.5 Please let me know the link of market place
    thanks
    Regards
    Krishna

    Hi Krishna,
    You can find all configuration guides at http://service.sap.com/ibc. For SRM server 5.5 (SRM5.0), the configuration guide has to be downloaded from Solution Manager.
    Solution Manager is must for all new version implementations now.
    Regards,
    Prashant
    Do reward points for helpful answers

  • Com.sap.pct.srm.core configuration missing in Portal for SRM

    Hi,
    We have installed a new portal 7.0 ehp1.
    Installed the SRM business package.
    configured all the roles.
    Configured UWL
    But in Universal workflow configuration content , com.sap.pct.srm.core is missing.
    In our development system , it was already present. Not sure why in the new system it is missing.
    Can we download from the development system and upload it in the new system.
    Thanks,
    Tanuj

    That should have been installed when you install the corresponding BP for SRM.
    To answer your question - yes you can download it from your DEV system and upload it into your QA system.
    Thanks,
    Shanti

  • SRM 7.0 configuration for EP

    Hi,
    We have EP 7.0 installed at our place.
    We recently installed SRM 7.01 at our place.We have the SSO configured between EP and SRM.
    Howvere now we want to run the SRM 7.0 transactions in EP.What is the process for doing that?
    Also even if we need to customize the iviews for SRM transactions in EP,iniitially is it mandatory to install the standard content provided by SAP and then customize the EP roles/views as per our needs?
    Is there any config guide available to map SRM roles and EP roles ?
    Please advise.

    Hi,
    You will have to install the Business Package for SRM. After you have installed the package, the standard content for SRM would be available (iviews, pages, roles etc). The standard roles delivered would be Requisitioner, Approver, Operational Purchaser etc. There would be corresponding roles in the backend, As such, there is no config available to map the backend roles to the SRM roles in portal. You will have to do this manually i.e. assign role in backend and then in Portal.
    SRM 7.0 and above is available in Web Dynpro ABAP. So, any customizations, for example, in Shopping cart, will have to be done in Web Dynpro ABAP.
    For having SRM Transactions, you can create transaction iview. However, after you have deployed the Business Package, most of the business functionality would be available through standard content.
    Hope this helps.
    Thanks,
    Nikhil

  • Goods Movement Not allowed(XWAOK) check box - for SRM Reservations.

    Dear Experts,
    We are working on Extended Clasissc sceanrio however certain materails we are creating reservation switching from ECS to Classic Scenario. System is Creating Reservation successfully in backend but Goods movement reservation allowed (FIELD XWAOK) check box not checked only for SRM Reservations
    Please note that ECC reservations checking this checkbox automatically based on Configuration. Is there any setting we have to do in SRM to pass the check box value to ECC? or How Can i check what data is passing from SRM to ECC......
    Thanks
    Ravi

    Dear Ravi,
    Could you please check if you have added the value '201' against the attribute movement type (forgot the attribute name) for the purchasing group or user group who created the shopping cart in SAP SRM. Once you have added the attribute, the problem should be resolved.
    Thanks and regards,
    Ranjan

  • SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?

    Hello experts,
    i've a question concerning the SRM "one-client" installation on ECC 6.0 EhP4 as Add-On.
    Is it possible to use SRM and ERP funtionality in a single client e.g. 001?
    Or do we have to use different clients on the system like for SUS?
    I haven't found any information regarding this topic in SAP ressources. I'm currently using CG "SAP SRM on One Client in
    SAP ERP" Release date 2008 (found on marketplace/srm-inst --> srm7.0); SRM - Technical Basis Configuration (BuildingBlock S00/S03). I'm facing problems while going through the following customizing steps:
    Assign logical System to Client [both logicall systems are on the same client (001)] ==> error while trying to reference the second logical sys. because client (001) cannot be used again (own presumption: error message differs)
    I've seen that some of you have successfully installed and customized this szenario. If someone could provide me any helpful information or guideline how to proceed in general... would be great...
    Best regards,
    PATRICK

    Thanks for your reply. I've checked the offline documentation because i've no access to solman.
    There is a document which describes the steps for configuring one-client customizing on marketplace.
    Link: [SAP SRM 7.0: SAP SRM on One Client with SAP ERP|https://websmp203.sap-ag.de/~sapidb/011000358700001201562009E]
    The problem is that its impossible to cofigure the system like it's described in the document.
    Let me explain why...
    SRM Addon is installed and customizing is done in client 001 (same client as erp)
    overview about defined logical systems:
    -ONECLNTERP (for ERP is defined)
    -ONECLNTEBP (for SRM is defined)
    When I try to assign the logical system to client 001 it works for the first entry
    for the second log. system it shows up an error message.
    -->I assume because client 001 has been already assigned. I cant use client 001 again.
    But One-Client szenario schould be possible in a single client or is SAPs One-Client more like One-System with differnet clients for SRM and ERP on the same machine?
    Because of the above mentioned problem I assume that it's impossible to run ERP and SRM in the same Client number.
    Am I right? Do I have to use two Clients on One System for proper Customizing?
    Or if it's possible to use a single client on one machine for both ERP and SRM how is it possible to assign two log. systems to one client number?
    I'm totally confused. Any help would be appreciated  - any tips/hints/experiences from someone who has customized One-Client?
    BR, Patrick

  • Business System not reflecting the XI Content for SRM

    Hi,
    We are currently working on the SUS-MM scenario.
    The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
    Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
    The current status:
    We can successfully transfer vendors from SAP R/3 to SUS
    We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
    Our Main Issue:
    The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
    On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
    Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
    Any help would be appreciated.
    Thanks
    Venkat.

    Hello,
    do you have a solution? I'm facing the same issue.
    Regards,
    Sven

  • PI: configuration for PO and Contracts creation on ECC

    Dear Gurues,
    My client is working with classic scenario with plan driven procurement on SRM 7 EHP1 and ECC 6 EHP5.
    From ECC EHP4 or higher landscape, classic PO will be created in the backend, from SRM only via XML. For this, PI system should be configured and SRM system connections and the SRM & ECC business systems have to be mentioned in the PI system.  So the use of PI is mandatory.
    Can you explain me which configuration shoudl I have to perform in SRM-ECC and PI?
    Thanks in advance.
    Martí

    I do not think anything is mandatory regarding the order. You can go ahead with PI 7.1 first and then EHP4 on ECC. But the otherway should also not be a problem.
    VJ

  • Workflow for SRM (contracts and purchase)

    Hi Gurus..could you send me this documentation of Workflow
    (configuration guide). I have to activate the N-Steps approval fo contracts and purchase order for SRM 5.0.
    thanks,
    Gustavo Nogueira

    Hi,
    See the foll links;
    http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/content.htm
    http://help.sap.com/saphelp_srm40/helpdata/en/5a/c5173f5ff48443e10000000a114084/content.htm
    http://help.sap.com/saphelp_srm40/helpdata/en/26/0f8b41ed891609e10000000a155106/content.htm
    BR,
    Disha.
    Do reward points for  useful answers.

  • MDM Server Password Parameter in SRM Web Service for SRM MDM Catalog 2.0

    Hi Experts,
    We have password set on our MDM server. I am little confused about how to define MDM server password parameter in external Web service Call structure in SRM System for SRM MDM Catalog 2.0.
    Will Catalog webservice work, if we don;t define password for MDM server in webservice??if No, then please let me know how to define MDM server password in SRM websevice.
    Any help will be highly appreciated.
    Thanks,
    Shiv

    Hi Shiv,
       The MDM Server password is needed when you are changing Webdynpro UI Configuration.
      For catalogs, all you need is the repository userid/password parameters in the call structutre.
    SG

  • Using XI Content for SRM 2007

    Hi,
    We are configuring a scenario for SRM which has following landscape
    ECC <=> SAP PI <=> SRM
    I am trying to use XI Content for SRM 7.0 and I have imported SAP SRM 7.0 Software component into ESR. But there are no Process Integration Scenarios which I can use to configure objects in Integration Directory using wizards. Also there are no IDoc imported in this SC and no mappings defined. Does that mean We have to create our own mappings? But this was not true when we used SRM 5.0 content.
    I am not able to find any document which talks how to configure PI scenario using SRM 7.0 XI Content. Do let me know if there is any?
    There is another thing which comes to my mind if SRM 7.0 XI Content is using web services instead of IDoc for communication with ECC system. If that is the case then i cannot find predefined proxy in ECC system and thus i have to create custom web service server proxy (where again i have to write custom code).
    Do let me know if anybody has used XI Content SRM 2007. So that I can get some help on this.
    Thanks,
    Divyakumar

    Hi Divya,
    We have done with SRM 5.0 but not with SRM 7.0
    When i see content for SRM 7.0 in Market Place i donot find , From where did u get download those XI content for SRM 7.0 ???
    Did u find any Integration Scenarios depecting the flow , we used the same for the business flow.
    Please do update how u have proceeded.
    Thanks
    rgds
    srini

  • Mass approval functionality for SRM work items

    Hi,
    We want to implement mass approval functionality for SRM workflow, so that any user is able to approve/reject multiple requests at one go through UWL.
    Please guide if it is possible to implement this functinality for task id TS40007952.
    Regards,
    Avantika

    Hi Avantika,
    The mass approval functionality can be implemented for simple workflow items which have decisions to complete the work item. (User Decision Type)
    In SAP Business Workflow, user can define a task as a decision task by assigning DECISION as the underlying business object type. The task definition allows user to create two or more decision options to complete the task.
    The idea is to simply create a custom view/subview for the UWL item and configure it according to your needs.
    Have a look at this blog:
    Mass/Batch Processing of Work items in UWL
    and also check the documentation:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/4e/72112bc9ea484196f2a5fdc68f5f5f/frameset.htm
    Let me know if you have any questions.
    Thanks,
    Shanti

  • Business Content for SRM 5.0 in SP9

    Hi All,
    We have BI_CONT release 702 with Level 0005. But when I try to install the transformations or any new objects like DTP, I'm not able to find many of those in Business Contents. Are these objects not yet delivered with the standard content? Do anyone have any official information on this or any OSS Note? Any planned release dates?
    Also any information on existing contnts for SRM 5.0
    Thanks in advance
    Amit

    Hi,
    But i know from the documentation of SRM 5.0 --> master Guide --->   It has been mentioned as follows
    1) THE SRM 5.0 CONFIGURATION DOCUMENTATION IS DELIVERED WITH THE  ST-ICO  150 CONTENT SHIPMENT FOR SOLUTION MANAGER
    2) SOLUTION MANAGER CONTENT REPLACES THE BUSINESS SCENARIO CONFIGURATION GUIDES , WHICH WERE DELIVERED WITH EARLIER SRM SHIPMENTS
    3) THE USE OF SOLUTION MANAGER IS MANDATORY FOR MYSAP SRM 5.0
    4) if you have a look at the Master guide for SRM 5.0 ---> there is one seperate section  available --->
    1.2 Solution Manager ---> which gives more details of the solution manager and its content.
    Edited by: khan voyalpad usman on Feb 12, 2008 7:49 PM

Maybe you are looking for