Automitic source of supply assignment in backend system for SRM

Hello Experts,
I am facing one issue regarding source of supply for SRM purchase Requisitions in backend ECC system.
When we create a shopping cart in SRM 5.0, a purchase requisition is created in backend and has source of supply assigned to it.
I donu2019t want to assign source of supply to purchase requisitions created for SRM.
Can you please suggest how to achieve this?
Also I think, SRM is internally using BAPI u201CBAPI_REQUISITION_CREATEu201D from backend ECC system for creation of requisition. This BAPI has an importing parameter u2018AUTOMATIC_SOURCEu2019, and if we pass space to this parameter, it creates requisition without assigning source of supply.
If this is correct, then can I use any BADI or customization in SRM to set the value of this parameter as space when SRM calls this BAPI?
Thanks in Advance.
Thanks and Regards,
Sanjay

SPRO--> SRM > SRM server> cross application basic settings --> Define objects in backend system (PR,RS,PO)
waht is the settings you maintained for your product category / purchase group - external procurement .
the above setting determines your follow on documents in the backend systems.
as discuused in the thread are you using any BADI ?
Unable to create PO in backend system for a text material in Shopping cart
peter offers how to debug to ..in the above link.
br
muthu

Similar Messages

  • Ideas as a backend system for SRM

    Hi All,
    Please tell me wether I can use( r/3) ideas system as a backend system for SRM System.
    Thanks & regards
    SATYA

    You can do that. Can connect an IDES(ECC) to SRM
    Thanks,
    Surya

  • Extreq Transfer with source of supply assigned

    Dear all,
    We are on SRM 7.0 PDP scenario.
    Purchase Requisitions with Contracts assigned are being transferred to SRM. We expect these purchase requisitions with an assigned source of supply not to be transferred to SRM.
    How can be solved?
    Thanks
    Ezequiel

    Hi Eze
    What error comes into slg1
    so how you are correcting your Purchase request?
    As manoj said is that PR is refering inforecord?
    Symptom
    You have a purchase requisition which is created from MRP. This purchase requisition has an info record and is already transferred to the SRM system. If we change the purchase requisition quantity later on, an error message "procurement profile cannot be changed" is raised and hence the changed PR cannot be transferred to SRM.
    However, you would like to allow the purchase requisition change even if an info record is present.
    Other terms
    BBP_EXTREQ_TRANSFER 6Q204 6Q 204 Material Requirement Planning
    Reason and Prerequisites
    This is a special functionality implemented for the customer.
    Solution
    Implement the attached correction instructions to enable this functionality.
    ===
    Note 1318245 - Changing the purchasing group for unreleased PReqs
    Symptom
    In ERP, you attempt to change the purchasing group of a purchase requisition in transaction ME52N. To do this, you enter a new value and confirm this by choosing "Enter". Under certain circumstances, this causes the system to issue an error message informing you that you cannot change the eprofile. When you confirm this error message, the purchasing group adopts its previous value again.
    Reason and Prerequisites
    The following prerequisites for this are known:
    1) The purchase requisition is subject to a release strategy and was not released at the time you attempted to change the purchasing group.
    2) In accordance with the attributes defined in Customizing (table T160ex), the combination of purchasing group and material group determines the system that is to process the purchase requisition. This error only occurs if changing the purchasing group results in a different processing system.
    Solution
    To elimnate this error, you have to implement the corrections contained in this note and perform the following manual corrections:
    1) Call transaction SE11.
    2) Enter the ETRANSSTAT domain and choose "Change".
    3) Switch to the "Value range" tab.
    4) Add the following fixed value to the existing fixed values:
    Fixed value = 3
    Short description (in English): Transfer conditions not fulfilled
    5) Save and activate these changes.
    reagrding inforecord issue:- I am not aware. but contracts assigned automatically to PR aftre running the report . I dont use inforecord.
    Br
    Muthu

  • Again:  Define Number Ranges per Backend System for Follow-on Documents

    Obviously I have a problem with this setting! What have I done wrong?
    We are running ECS with multiple Backends. We want to assign different number ranges to each backend PO.
    Our settings:
    - Number Range SC and Follow On Documents:                          01 0100000000 - 0199999999 (internal) and                                                                               
    P1 3010000000 - 3019999999 (internal)
    - Number Range local PO:                                                         P0 3000000000 - 3999999999 (internal)
    - Number Ranges per Backend System for Follow-on Documents: XYZCLNT010 PO number range = P1
    - Transaction Type ZRM assigned to number range PO
    - Backend Document Type ZRM assigned to an external number range P1  3010000000 - 3019999999
    I would have expected following system behaviour:
    System creates the local PO within number range P0 and creates in backend XYZCLNT010 a PO within number range P1.
    But instead SRM tries to post the backend PO with a number from range  P0.
    What is wrong?
    Rgds.
    Dieter

    Hi. I do not know how to fix your problem as standard, I have never done the same setup, but BADI BBP_BS_GROUP_BE will allow you to choose different number ranges in method GET_NUMBER_OR_RANGE.
    Does that help at all?
    Regards,
    Dave.

  • How to del all info regarding source of supply from R3 reqs coming to SRM

    Hello Experts,
    We are trasfering requisitions from ECC to SRM.
    By standard functionality, if a requisition comes with a source of supply assigned to it, and this requisition is sent to SRM, we have configured that a Shopping cart that has a SOS assigned should create an automatic PO.
    However, these requisitions might have materials that already have a local contract in SRM. This is colliding with the SOS assigned previously in the Preq in ECC.
    Is there a way to wipe out the SOS information from the requisitions coming from ECC?
    Thanks!
    Regards,
    Gilberto Gallardo

    Hi. You could try BBP_SOS_BADI.
    Alternatively, why not disable the souce of supply fields in ECC using field selection config?
    That way users could not enter a source of supply in ECC.
    Regards,
    Dave.

  • Automatic Replication of Vendors from SAP R/3 Backend System to SRM System

    Hi All,
    I am searching for any existing standard configuration in SRM V 4.0 System for replicating Vendors of selected Purchasing Organizations from SAP R/3 Backend System to SRM System.
    I have checked in the SPRO  settings of SRM System and found/could make out from the documentation avalable in help itself, that there is a standard configuration by which you can automatically replicate the Vendors created in SAP R/3 by activating the following in SPRO: By putting a tick mark against the Check Box existing against "Create New Vendors also"  under Vendor Synchronization with Make Global Settings I hope.
    If the above statement is correct, then I hope we have to schedule a job ,since the above configuration is based on a job based execution which should run at least once a day.
    In that case,which would be the relevant job which has to be created WITH A VARIANT in order to filter the Purchasing Organizations desired for.
    Please help me out since we have to implement this asap.And if the above solution is not at all feasible,then please do reply at the earliest.
    Awaiting for your early reply .
    Regards
    Annette

    Hi
    Please try this ->
    <b>http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm</b>
    Regards
    - Atul

  • Backend system for SRM7.0

    Hi Experts,
    Now my requirement is  upgrade SRM3.0 to SRM7.0.
    the thing is currently we are using R/34.6C as a backend system for SRM3.0.
    now the query is can i go ahead with the upgrade with R/34.6C itself or else i need to upgrade the backend system first to ECC6.0.
    I believe R/34.6C will not support to SRM7.0 but i am not sure i am searching for the proper information but i am unable to find it out and one more thing do we need to use the backend system for SRM7.0.
    Please can some one share the information regarding the above problem.
    Regards,
    Srini

    Hello Srini,
    You can leverage all the functionalities of SRM 7.0 with ECC 6.0 EhP4 only.
    Though SRM 7.0 can be implemented with ECC backend as R/3 4.7 or higher, but the functionalities will be limited.
    Hope this helps.
    Thanks
    Ashutosh

  • Compatiable Backends system for SRM7 eph1

    Hi,
    I was reading document and xls sheet for SRM7.01 (eph1)  (https://websmp210.sap-ag.de/srm-inst) and I wanted to know which are the compatiable Backend Systems for it. e.g. SRM7.01 can work with ECC5.0, ECC6.00, ECC6.01 etc.
    Or we need SRM7.01 with ECC6.05  only? Please guide on this.
    Thanks in advance.
    Rahul Mandale

    Hi Sam,
    We are considering upgrading to SRM7.01 from SRM 7 too. Our question regarding its compatible backend version is that if we stay with ECC 6 EHP 4, would any existing SRM 7 functionality stop working?
    Thanks.

  • How is goods receipt and invoice sent from backend system to SRM system?

    Hi friends
    How is goods receipt and invoice sent from backend system to SRM system?
    Thanks
    regards
    Krishna

    Hi Khan
    BBP_GET_STATUS_2 and Clean_recrec_Up are background jobs to sync ecc and ebp.
    BBPIV and MBGMCR are used to send goods receipt and invoice from srm to backend system
    So we dont require any special idocs to send goods receipt and invoice from ecc to ebp.Are all handled by BBP_Get_status_2
    Regards
    Krishna

  • Distributing source of supply assignment

    Hi All,
    We have a requirement as below:
    We have 4 contracts with 4 vendors for a product at the same time. Now, user creates SC to order 1000 units of this product. We want that system automatically creates 4 POs (because there are 4 contracts) with 250 units (1000/4) for each PO. So, 1 contract is assigned to 1 PO. We're working on SRM 7.
    Thanks,
    Iqbal

    Sachin is correct .Good idea.
    You can use this function in both a manual process and an automated process as part of sourcing to generate purchase orders (POs). Quota arrangements allow you to define target percentages and distribute them between two or more purchasing contracts. A quota arrangement ensures that a contract is guaranteed both a minimum sales volume and a defined percentage of the total purchasing volume of a product category or product. A quota arrangement has the highest priority in the sourcing process.
    During the validity period of a quota arrangement, there are two phases:
    Fulfillment of guaranteed minimums
    Before the system assigns contracts based on target percentages, the quota arrangement ensures that all guaranteed minimums of contracts participating in that quota arrangement are fulfilled. The sequence in which the guaranteed minimums are fulfilled is determined by the target percentages defined in the quota arrangement. Guaranteed minimums are defined in the contract.
    Assignment of contracts based on target percentages
    Once all of the guaranteed minimums of contracts participating in a quota arrangement have been fulfilled, the system continues to automatically assign contracts based on the target percentages defined in that quota arrangement. The winning contract is then determined by the relative difference between the actual release value and the target value of the quota arrangement.
    Integration
    You use this function in the following applications:
    Contract Management
    When you order a purchase order against a contract that is part of a quota arrangement, the system automatically updates the release values for each contract line item.
    Sourcing
    The system shows the winning contract for a quota arrangement in the manual sourcing process.
    During manual sourcing, you can access quota arrangement details from the sourcing application.
    Prerequisites
    You can only create a quota arrangement if a product category or a product is saved in the system, and a contract is available so that you can assign target percentages for the quota arrangement.
    Features
    The system allows the source of supply to be selected automatically, based on the fulfillment of guaranteed minimums and target percentages defined in the quota arrangement.
    A quota arrangement uses standard rules to determine the winning contract in the sourcing process. However, the system can redetermine a winning contract with your own logic if you implement a Business Add-In (BAdI) from Customizing. To access this BAdI in Customizing for SAP Supplier Relationship Management, choose  SRM Server  Business Add-Ins (BAdIs)  Sourcing  Redetermination of the Contract to be Used (Quota Arrangement) .
    Activities
    To create a new arrangement, choose  Strategic Purchasing  Contract Management  Create Documents  Quota Arrangements .
    You can change an existing quota arrangement, for example, by modifying the target percentages or adding further contracts (with or without a quota base quantity)
    Caution
    The contracts in a quota arrangement must have the same base unit of measure.
    End of the caution.
    Note
    In the Quota Base Quantity column, you can enter a nominal released quantity for contracts joining an ongoing quota arrangement. This allows you to simulate participation of the new contract in the quota arrangement immediately. If you leave this field blank, the system assigns the new contract with all sourcing requirements, until it catches up with the other contracts participating in the quota arrangement.
    End of the note.

  • Unable to create PO in backend system for a text material in Shopping cart

    Hi All,
    When I am approving  a shopping cart with text material(ie without material/product/goods), I am getting PR instead of PO. Please explain the settings for getting PO.
    Regards
    SATYA

    Hi,
    SPRO--> SRM > SRM server> cross application basic settings --> Define objects in backend system (PR,RS,PO)
    Always purchase requision 
       Or
    PO if item data complete,other wise PR.
    1. Enter the organizational unit and/or the category.
    2. Enter a source system.
    3. Choose the procurement type.
    Reservation if stock is available, otherwise external procurement
    The system creates a reservation if the material is subject to inventory management and sufficient stock quantity is available in the warehouse on the requested date.
    Always reservation for materials subject to inventory management
    The system creates a reservation if the material is subject to inventory management, irrespective of whether stock is available.
    Always external procurement
    The system does not create a reservation, but always procures the item externally. In this case, you specify the type of external procurement.
    The following options are significant if the system cannot create a reservation (for example, if there is no stock available or for a non-stock item) or the system must not create a reservation (choose Always external procurement).
    Purchase order if item data complete, otherwise purchase requisition
    The system always tries to create a purchase order. If the item data is incomplete (for example, the vendor or price is not known), the system creates a purchase requisition from the item.
    Always purchase requisition
    The system always creates a purchase requisition.
    Always local purchase order
    The system always creates a local purchase order.
    Thanks
    prasad.s

  • SUS - Multiple backend systems (MM & SRM)

    Hi
    I am implementing a SUS client linked to both SRM (seperate client) and MM.
    SAP refer to this as the 1:n scenario http://help.sap.com/saphelp_srm50/helpdata/en/cd/0e343e47fd6b2ee10000000a114084/frameset.htm
    All interfaces are working correctly except for SUS PO confirmation --> Backend.
    For MM-SUS the PO confirmation message route is:
    SUS to PI - PurchaseOrderConfirmation_Out
    PI to ERP - ORDRSP.ORDERS02 idoc
    For SRM-SUS the PO confirmation message route is:
    SUS to PI - PurchaseOrderConfirmation_Out
    PI to SRM - PurchaseOrderConfirmation_In
    The problem we have is getting PI to send the appropriate message back to the appropriate backend system.
    Has anyone implemented this scenario?
    If so can you explain how PI deals with this?
    Do we need 2 interfaces in place?
    Thanks
    James
    Edited by: J-Wilson on Jan 19, 2012 1:25 PM

    thats something to do with PI.
    they get source XML from SUS. and in PI after deciding target system they have to decide the target. I dont have that much knowledge on PI but i know that they have a place in the integration builder to pass the condition for a field from XML. according to that they need to decide the target interface..
    i think SAP must have provided guidelines for PI to configure for SUS.

  • Limiting POs from backend system for Confirmations

    We have activated the ALE model for Confirming Goods Receipt from backend POs.  I know that I can use BADI BBP_WF_LIST to filter the POs displayed in the Create/Display Confirmation transaction.  However I would like to limit the POs that are sent from the backend system to EBP by document number range.  This should prevent cluttering the EBP system with junk POs.  Is this possible?
    Thanks,
    Nancy

    Hi
    <b>Please go through the links below, which deal with the same issue -></b>
    BADI BBP_WF_LIST implementation
    Re: Is it the right BADI
    Get PO details from backend
    Filtering content in the SRM confirmation worklist
    Re: Worklist for confirm goods using BBPCF02
    Problem in badi for sourcing worklist 'BBP_WF_LIST'
    Re: Confirm Goods / Services Centrally - BBPCF03
    Using BADi's BBP_PGRP_FIND  and BBP_WF_LIST  for Sourcing
    Hope this will help.
    Do let me know.
    Regards
    - Atul

  • Multiple backend systems for business package ESS/MSS

    Hi,
    I would like to know whether there is a smart solution for connecting the business package ESS/MSS with multiple backend systems (up to 10 systems).
    I am aware of the possibility using parameter "sap-wd-arfc-useSys", but this implies, that content needs to be duplicated n-times in order to be able to maintain the Jco destination suffix.
    Any hint, also for custom built solutions are very welcome!
    Best regards,
    Johannes

    Johannes
    There is some problem with the link
    See this.
    Connecting multiple SAP Systems
    Thread name is 'Connecting multiple SAP Systems'
    Krishna Murthy

  • Unable to distribute the MODEL to backend system in SRM 5.0

    Hello Experts,
    I have created distribution model " SRM_to_R3" in BD64, maintained message types BBPCO, BBPIV and MBGMCR
    Every time I try to Distribute this MODEL to back end system I get the following error in IDES system
    Target system T90CLNT090       Commnunication error occurred, error when opening an RFC connection
    RFC connections are
    T90CLNT090   - SRM to R3
    SRM_00_800   - R3 to SRM
    Systems got connected successfully and I can "Remote Logon" too......
    My query is why am not able to send or distribute the MODEL from SRM to ECC backend system ?
    How to get rid of the error and successfully distribute MODEL to backend system.........appreciate your help in this regard
    Rgds !
    SAP Novice

    Hi Zuljana,
    Kindly check if your partner profile is active. (Indicated by 'A')
    Sometimes if your partner profile is not active, you wont be able to distribute your model. Check the 'A' indicator
    Regards,
    Nikhil
    Edited by: Pbponikhil on Dec 21, 2010 4:11 PM

Maybe you are looking for