Fiori: incorrect alias used when multiple system aliases assigned

Hello all and Masayuki Sekihara
I'm implementing SAP Fiori PO/PR/Contract approval.
There is only 1 gateway system currently in order to support 4 ECC systems.
(Sandbox, development, quality and production)
Everything is working correctly when assigning only one (Sandbox) SAP system alias to the gateway service of PO approval for example.
However when we assign multiple system aliases and set the sandbox system alias as default things go wrong.
(Currently IW_BEP is not yet installed on the development; Quality and productive system)
And we noticed the service is resulting in an error message because these BEP function modules can not be found on the target system.
However the issue is that it should not call these systems as we have flagged Sandbox system as default.
Anyone has an idea or note for this?
(We temporary fixed this by assigning only a single alias to the services).
But in a later phase we want to add all in order to be able to test on all systems and run production as default.
Thanks for your help.

I don't want to use the MOC.
I want the behaviour like mentioned in the note:
The default system is used whenever the service is not called as MOC. If you have defined more than one default system alias, the first system is used as the default.
How can I achieve this?
According to my understanding now I should make sure ";m"o is not added to the URL, but how can this be achieved?
Thanks!

Similar Messages

A lot of memory is used when multiple tabs are open

Is there anything that can be done about the insane memory usage in Firefox when multiple tabs are open? I often have 20+ tabs open and the amount of RAM that Firefox uses when I have it open with this many tabs is just ridiculous. As an example of this, I just restarted Firefox after checking the Windows Task Manager. The Task manager said that Firefox was using 1.2 GB of RAM. I did have 32 tabs open, but this seems excessive even for this many tabs. Some of the tabs were image heavy, but none of them had any video in them. I'd think 10 MB per tab of RAM would be plenty to cover these kinds of pages, maybe 20 MB at most. The upper end of that range would be 640 MB of RAM. Instead, it appears to be using an average of 40 MB of RAM per page when this many tabs are open.
Is there anything that can be done to reduce amount of memory being used when multiple tabs are open? It really shouldn't need this much RAM to serve this many pages.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Where-used list for system aliases?

Is there a way to get a list of all the iViews that reference a particular system alias (or better, a set of system aliases?). Possibly by querying the database?
Thanks,
Sean

Hi Sean,
Yes there is a TRICKY way to do it with standard SAP Portal functionality.
But again this is tricky and you must keep sharp all the time.
1. In the Portal goto: Content Administrator > Multiple Property Replacement
2. Right click on the folder Portal Content (or one of its sub-folders); and select the action "Add folder to list"
3. click next in the wizzard
4. you should now be on step 2 of the wizzard and only select/check iViews
5. Select the 2nd radio button "Search objects by property ID"
6. in the field Property ID you must fill in "System" (without the quotes)
7. in the field New Value you can fill in anything as it is not used, but you must fill in something, like TEMP
8. click next in the wizzard
--- this takes a while as it queries all iViews for the property "System" ---
9. this screen will show you a statistic overview, like a headcount, but you cannot use it for a 1-on-1 chek yet
10. click next in the wizzard
11. this screen will show two containers left and right where you can select object
--- DO NOT click next anymore from this point on ---
12. with your mouse or ctrl-a select the contents of the right container and paste it into Excel.
Now you have a list of all iviews that have a system property and the value of that system property.
13. Cancel/Abort the Wizzard!....
Cheers,
Benjamin Houttuin
Edited by: Benjamin L.F. Houttuin on Jul 7, 2010 12:35 PM

Incorrect alias and SMTP address

Hello,
some users were imported into Unity Connection 8.5 with an incorrect alias. They were demoted out of LDAP, had their alias changed and then integrated back with LDAP. Their SMTP address in Unity was still the old address based on the incorrect alias. When we try to change it to the correct address Unity says that a user with that SMTP address already exists. Any way to correct this issue?
Thanks in advance! all replies rated.

She's now transfering me to a supervisor...........gonna take all day haha
He told me to go to appleid.apple.com whooo!
He seems to know his stuff though so I'm gonna stay on the line with him. He said one of the engineers might be able to change it.
He's doing some research now....

System aliases lost when Transporting

HI:
When I transported my objects from DEV server to QA server, the System aliases of my system objects were lost. I have to add aliases to thoses systems manualy, anyone knows how to solve this?
Thanks a lot!

hi,
Aliases do not get exported during a transport operation.
An alias must be a unique identifier of a system
Content created for a specific portal may not be viable in another portal if continues using the same aliases that it used in the original portal. iViews that access a back-end system through a certain alias may not retrieve the desired data, or any data, once they are in another portal, because their aliases may not access the correct systems.
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/e9/9bc93f92908032e10000000a11405a/frameset.htm
Regards,
Ganesh N

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

Role Upload - System Aliases not used

We are having a strange occurance during role upload.
In the migrated content area, iViews are being created in folders that refer to system aliases used (e.g. R3, BW, etc.). However, the "System" property of each iView is set to the logical system name (e.g. RDV123, BDV123) rather than the alias. We would like the role upload to set the "System" property to the alias names by default. Does anyone know how to accomplish this? Does anyone know why it doesn't do this in the first place?

Thanks for the input.
Right now my system connectors are all setup with their logical names (e.g. RDV123) as well as a generic alias that is used across landscapes (R3).
My dilemma is transport to QA and Production. I could very well go into PROD and QA and make an alias on those production systems for dev (e.g. make an alias for RPR123 to also show as RDV123), but this would create conflicts. I;d prefer to just use very generic aliases across all systems such as "R3".
Is there no way into tricking the role upload into referencing some table to know that instead of logical name, use default alias so it will be transportable?

No disconnect warning when multiple remote users use same username and password to logon to VM

I created a single user account to be used by multiple users to access a system consisting of multiple VMs. The problem is that when User #1 has an active session and User #2 attempts to log onto the same VM User #1's session is ended without
warning. Now if User #1 has an active session and User #2 attempts to log onto the same VM using different credentials a [Remote Desktop Connection] dialog displays alerting User #1 that User #2 wants to connect and gives an option to disconnect or stay connected.
Realizing that the latter preferred behavior is because the two Users are using different credentials I would like to know if the same preferred behavior of alerting the Users of active connections can be enabled for instances when both Users are using
the same credentials - perhaps by recognizing that their remote ips are different or something.

not sure if this fits your case exactly. there was another similar question asked in the forum and the solution was:
You may set this via group policy, for example, in the server's local policy using gpedit.msc:
Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Connections\
Restrict Remote Desktop Services users to a single Remote Desktop Services session Disabled
http://social.technet.microsoft.com/Forums/windowsserver/en-US/a26af954-c2ef-4beb-b892-9e7717518850/allowing-users-to-open-multiple-remote-sessions-on-windows-server-2012-rds?forum=winserverTS

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

iCloud requires OS X 10.7.2.

Multiple Apps using same security system - Attn: Frank

Hi Frank:
Based on what you suggested for a scenario with different apps/databases using one "application_users", "application_roles" tables and one "system-jazn-data.xml" file, does the following setup sound right?
(1) APPLICATION_ROLES table
Add an additional column "APPLICATION_REALM". This will have "app_one_realm", "app_two_realm" etc.
(2) System_jazn_data.xml
<application>
<name>current-workspace-app_one</name> (***App One wrkspace****)
<login-modules>
<login-module>
<class>oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule</class>
<control-flag>optional</control-flag>
<options>
     <option>
     <name>data_source_name</name>
     <value>jdbc/BDTestDS_App_One</value> (***Points to connection for App One. Does this sound right?****)
</option>
<option>
<option>
<name>realm_column</name> (***is this correct?**)
<value>application_realm</value> (**Is this correct?***)
</option>
</options>
</login-module>
</login-modules>
</application>
<application>
<name>current-workspace-app_two</name> (****App Two wrkspace. Make sense*** )
<login-modules>
<login-module>
<class>oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule</class>
<control-flag>optional</control-flag>
<options>
     <option>
     <name>data_source_name</name>
     <value>jdbc/BDTestDS_App_Two</value> (***Does this sound right? Coonection for App Two*****)
</option>
<option>
<name>realm_column</name> (***is this correct?***)
<value>application_realm</value> (***Is this correct?***)
</option>
</options>
</login-module>
</login-modules>
</application>
(3) system-application.xml (Points to absolute path for system-jazn-data.xml)
<jazn provider="XML" location="<absolute address>/system-jazn-data.xml" default-realm="jazn.com"/>
(4) jazn.xml (Points to absolute path for system-jazn-data.xml)
<jazn
location="<Absolute address>/system-jazn-data.xml"
default-realm="jazn.com">
</jazn>
(5) I am not clear about your comment "Regarding Application Context when assigning roles to a J2EE authenticase case see jaassec/index.htm doc" Are you talking about something in the web.xml for each app?
How does (a)
<option>
<name>realm_column</name>
<value>application_realm</value>
</option>
in "system-jazn-data.xml"
and (b) "APPLICATION_REALM" in APPLICATION_ROLES table
and (c)
<application>
<name>current-workspace-app_one</name>
</application>
<application>
<name>current-workspace-app_one</name>
</application>
in "system-jazn-data.xml" all tie in?
In other words, how are the roles tied to the appropriate application context? Each app needs to know its role?
Thanks

Hi,
please note that application_realm only works with the LoginModule provided with the document. It doesn't work with the OC4J oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule. Note that the how-to document I pointed you to explains the use of custom LoginModules by example of custom login modules I wrote.
The way it works is that the application_realm if provided is used when querying the application specific roles. If a realm is not provided then all roles are queried for the user.
Frank

Error when using the variable System::ErrorDescription

HI All,
When I try to use the variable System::ErrorDescription I get the following error:
The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there.
Do I need to declare it or it's a variable that always is available to get exceptions from the execution states?

if this is in a Script Task then:
- add the variable in the Script task property ReadOnlyVariables list
- in the Script Code refer to it as
string ErrorDesc = (string) Dts.Variables["System::ErrorDescription"].Value;
Jan D'Hondt - SQL server BI development

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

Hi, incorrect previously used e-mail address suggestions keep appearing in my Yahoo! ID box when signing in & I can't get rid of them.

Hi, incorrect previously used e-mail address suggestions keep appearing in my Yahoo! ID box when signing in. I can't get rid of them. I've tried clearing the cache and cookies. I couldn't find an option to clear private data, don't know if that would work. My Yahoo password is not saved and my password is not the problem. I just want to know how to delete previously used emails from logging in suggestions so they stop appearing, hope you can help, cheeeers - Dave.

Thanks very much for the response Sandee. I tried your suggestion of the Annotation option and this worked! - wonderful.. altho this test now works for me I'd still love to get it working from InDesign.
What I'm trying to achieve... my client had 5 powerpoint presentations that need updating with new branding (totally about 160 pages - with about 20 basic animations - i.e. flashing lights on products etc).
I sold him on the idea of using InDesign/PDF rather than powerpoint - but am needing to find an easy solution for the animations. So I've been working on this test file. Have self taught myself on a basic flash animation (from Lynda.com)... and tried importing both SWF and QT .MOV into InDesign and then exporting to PDF and when it loaded up in Acrobat it would always "unexpectedly quit" upon opening... even after trying different versions of PDF compatibility and restarting etc.
Is there something obvious that I'm not doing right?
Also if I get it to work, does that mean that my client and all their staff around the world will need to be Acrobat Reader 9?
Thanks again for your time and help
R

The sort field is not used when ordering multiple cds in one alumn folder, how do I correct this?

It is using the track number and not the sort order field. The reason I have multiple cds in one alumn is because they are books on cd.

Sorry for the typo my "b" key was not working correctly.
The sort field is not used when ordering multiple cds in one albumn folder, how do I correct this? It is using the track number and not the sort order field. The reason I have multiple cds in one albumn is because they are books on cd.

When I drag ANY JPEG into a new folder of ANY kind, I get an alias, not an original. And, when I drag aliases onto a blank disk to burn it, I get burned aliases, NO originals. That's what I'm asking. How do you drag a JPEG and NOT get an alias?

When I drag ANY JPEG into a new folder of ANY kind, I get an alias, not an original. And, when I drag aliases onto a blank disk to burn it, I get burned aliases, NO originals. That's what I'm asking. How do you drag a JPEG and NOT get an alias?

Finder Help describes how to move, copy etc.
As well, Apple - Support - Discussions - Moving or Copying Files and ...

Fiori: incorrect alias used when multiple system aliases assigned

Similar Messages

Maybe you are looking for