Fire Wire Error Message:

If anybody has been following my posts, I have been wanting and needing a fire wire enclosure for large hard drives. I only have one of each. A Fire Wire enclosure and a 3.5 PATA drive. A Maxtor 160gb. I have other hard drives and they are smaller, and have issues. Fortunately OS 9 is able to mount these damaged drives.
I am very happy to have a fire wire enclousre and also a new hard drive for my files. =] =] And I still have like a bunch of files to organize but the most important thing right now is to get all of these files off of three messed up hard drives.
I have one hard drive connected to a USB enclosure and the new 160gb one is connected to the Fire Wire enclosure. (It also has a USB 2.0 port but I am connecting it to Fire Wire) and I am running OS 9 while operating all the external hard drives.
As for the fire wire enclosure: I get an error message:
A FireWire disk has stopped responding. The problem must be corrected to prevent damaging the disk's contents.
Please check all FireWIre connections. If you added, removed, or turned on a FireWire device on or off, try undoing what you did.
And so I turn off the drive and turn it back on. It acts like nothing has happened to it. But certainly something bad is happening!!! =S
Also it has done this in the middle of transferring files and then I turn it off and on and then it resumes moving THE SAME file!!!!!!! =S
????????????????

Could the problem have been the USB-only enclosures??????? I have tried to get it to work a few minutes ago and it would not turn on. I gave up on it and I disconnected it. I am moving files from the damaged hard drives onto that imac's internal hard drive, and then onto the new hard drive ... all using the same fire wire enclosure. I have one so far and not two... and that is kinda frustrating. =S }=S }=S
Even though I have to keep switching hard drives with one fire wire enclosure, the fire wire enclosure transfer speed is now FAST!!!!!!!!
=]

Similar Messages

How Avoid required Field Error message

I am using JDevelepor 11.1.2.1.0 Version
I create a form in ADF table format. In my table composite primary key,(compaycode,division code,branch code, and account code),
And i set LOV for these attributes.
The problem is that when i set value to company code fire required error message for other primary key fields....
How am handle this?
Regards
Ansal

Have you tried to set the immediate property on the fields?
Timo

Fire wire cam doesnt work im messages chat

my fire wire Unibrain cam does not connect in messages chat and I cannot receive the other persons cam
. Are there settings I should correct. I am using 10.8.4

HI,
So you are getting video in to the App.
So any Firewire 400/800 issues are moot.
Next step.
In the Video Menu is the Video option dark and active text and is it ticked ?
In the View Menu is Show Video Status ticked ?
This Menu and the items from show Buddy Pics down rely on a Buddy list being "front" (More on that in sec).
The first of these makes sure the camera is On and the second makes sure the Buddy Lists display the Video icons.
If there is not enough Internet Speed for Video Chats then the Video items may be ticked but greyed out.
To make sure you can see the Buddy Lists go to the Window Menu.
If you have set up iMessages and nothing else except Enable the Bonjour account then the Buddies item will dispaly the Bonjour list.
If you have AIM, Jabber or Yahoo IDs set up as well then the Buddies item is a combined list.
You can unlink them in the General section of the Preferences.
The Window Menu will change to list the Buddy Lists by the Description Fields in the Accounts section
An AIM Buddy list for example should display green Video icons next to the Buddies.
In this my other logged in AIM valid Names show up under Family and an Apple Test accounts shows in Auto Responders (you can't Video with yourself but you an add the Buddy name to a Buddy list).
Only Jabber Buddy list will do this as well as the Yahoo option is Text only.
However it does have to be AIM to AIM or Jabber to Jabber.
AIM in this sense includes the Apple Issued IDs with the ending of @mac.com, @me.com and @icloud.com
Jabber ones can include GoogleTalk and Facebook IDs if you have Enabled Talk at Google or Chat at Facebook.
Sticking with the AIM case you would then click on the green video icon as one method of Starting a Video Chat.
As it is an AIM Buddy list the Buddy should be an AIM vlaid Buddy.
Note
Apple IDs obviously have an @ in them and in most cases are valid emails (or have been in the past)
They are valid with the AIM service
GoogleMail IDs are then valid Jabber IDs once you enable Talk in Products at Google. Facebook also uses the users email Address.
The can means that fro both services an email address is the valid ID.
Other Jabber IDs may not be email but do follow the [email protected] format.
This means it is possible to add the IDs or Screen Names from one service to the Buddy list of another.
The Buddy will appear Off line in these case but you will not be told they are not a valid Buddy.
If the chat fails at this point you normally get some sort of alert message.
It may even have pop up that can be expanded for more details.
You may see more in the Video Menu > Connection Doctor > Errors tab
If you have an AIM Buddy list then try adding the Apple Test Accounts. See table 1
There used to be 6 (three plain AIM names and three @mac.com versions).
It tends to be that only 1 or 2 are On at any one time now.
Can you connect to this "Buddy" ?
8:22 PM Wednesday; July 17, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Error messahe re fire wire

when I plug my iPod in to my car charger, I get a error message words like " Can not connect using a fire wire connection, switch to a usb connection..." at the bottom is states "Push middle button to dismiss", What does this mean. Also when I push middle button the error message does not go away.

further to this post, this also happens when I sync to my computer. After the saync process and i disconnect, and try to play music this error shows. The actual wording is "Fireware connections are not supported. To transfer songs, connect the USB cable provided: and again at the bottpom is says "Press Center to dismess". And the error does not dismiss when I push center.

I am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/rirefox/components/ref helper.JS:510 in English

i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

I keep getting a "Flash blocker browser settings or extension" error message in Soundcloud after installing fire fox. I have tried flash 11 & 10.3

I keep getting an error message saying "It looks like you have a flash blocker browser settings or extension. Please enable flash to hear sound" error message come up when I try to play music in Soundcloud. I have just installed Firefox on my laptop and upgraded to the latest Flash player. I then tried down grading to Flash 10.3 but this didn't help. I have been watching programs in iplayer and had no problems there. Please help!

I have been through this process several times. It sometimes works and sometimes it doesn't. Running in safe mode proves nothing.
Youtube videos work fine. So flash is working. Hosts file is the default one so nothing blocked). No sit blockers etc. all disabled in add-on manager.
Old Soundcloud works fine. Sometimes the new one does. Most of the time it does not.
Switch to IE8 (yuch) and this gets even worse. Old SC works but new one says I need an update and provides a link. I click the link and MS site says I am a;ready running the most up to date browser.
Bottom line...
1) if you use IE, better go to Windows 7 or 8. Otherwise Soundcloud should be avoided. Sure, the old SC still works ... for now.
2) if you use Firefox, roll dem bones and see what ya get. Maybe it will work. Maybe it won't. But it's a pain to have to keep clearing the cache and cookies to fix the one and only site that has this issue with Firefox 18.
3) go to Chrome if you love google. It seems to be OK.
4) ignore soundcloud all together. It's not going to survive long in this mode.

Unable to mount external fire-wire hard drive - help, please!

After working the last couple of days to resolve the failure of an internal drive, now one of my external drives (LaCie fire-wire) will not mount. I was using it to back up the bad internal drive, and probably forgot to eject the drive before turning it off; don't know if this really makes any difference, but just in case...
If I use Disk Utility I can see the LaCie drive, but it will not mount.
When I tried to verify the drive got the following message -
Invalid sibling link
The volume LaCie HD needs to be repaired
1 HFS volume checked - volume needs repair
Next I tried to repair the drive, and was told -
Invalid sibling link
Volume check failed
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
This is where I stopped. I read another post somewhere in the forums about making a disk image of the drive, but I'm afraid of making things worse by proceeding without knowing what I'm doing. Any ideas on how I can somehow retrieve the data in the LaCie drive?
Once again, thanks in advance for any help!

Hi! Diskwarrior is always better at repairing drive directories which constitute 99% of all drive problems. I run it fairly regularly usually once a month. BUT I always run it at the first sign of weirdness or problems AND every time I have had a power failure or a forced restart or shutdown because those events usually always damage the drive's directory. Often even though the directory is damaged OSX can go ahead and mount it and it will work ok but eventually the damage builds every time one of those events occur and finally there is a failure to mount or boot. Tom

Fire wire ports driving me batty

I have a late 2007 Intel iMac with a total of 7 Lacie external hard drives daisy chained together via the 800 fire wire ports. The externals are stacked one on top of the other. I cannot hook up the 8th hard drive to the 7th one (the hard drive on the top is #1, the one on the bottom is #7) without losing the 7th hard drive (I get an error message saying that the #7 hard drive hasn't been disconnected properly) and it disappears from the desktop. However, if I attach the 8th hard drive via the 400 fire wire port, all is well. I've switched the order of the hard drives and used different cables, but it always seems that the 7th hard drive has an issue with both 800 ports being used. Anyone have a suggestion (other than hooking up the 8th to the 400 port) or an answer to why this is happening? I think maybe heat might be a factor.
Message was edited by: Sunny's mommy

I don't think the hard drives have internal fans. Anyway, I've tried switching the order, like hooking up #1 & #2, with #2 on the bottom, then hooking up #7 to #2. Changed around the order - sometimes it works and sometimes it doesn't, but it's pretty consistent, that whenever one of the two 800 firewire ports on the bottom one is in use and I attach another hard drive to the free firewire port, it freaks out the bottom one. However, when I use the 400 firewire port, all is well. Anyway, in the grand scheme of things, I'm not going to lose sleep over it. Was just wondering if it's the way I'm setting things up. By the way, what is a bridge board?
Message was edited by: Sunny's mommy

Enabling VNC or Fire Wire booting

Hello Mac People,
Is there anyway to access "System Preferences" remotely?
I need to check and make sure that "Remote Management" is enabled on a FULL XSERVE server running 10.4.11.
I will be using a Mini-Mac also running 10.4.11; this is only going through a switch (same domain).
I have FULL administrator privileges and have no problem connecting using "Server Admin Tools". And I can telnet in just fine also.
Have tried approximately six GUI VNC applications (Chicken of the VNC, Tight VNC, etc.etc.) and ALL fail with vague error messages.
Also tried a known good PCI video card into this FULL headless server but then the operating system froze at start up. Yes the video card is compatible with 10.4.11.
I have also tied to "kick start" the service as well using:
sudo sh -c "/bin/echo -n enabled > /Library/Preferences/com.apple.ScreenSharing.launchd"
(and several syntax variations mentioned on the web) but the commands also fail.
This is a CRITICAL Mac server that is other wise working GREAT located at one of the companies that I support and of course they do not want to buy "Apple Remote Desktop". Gees .... this company is still running Office 2000 on most of there workstations. And seeing as how other VNC's are failing I'm not even sure ARD would install and then work anyway.
If there is no way to access "System Preferences" remotely. Would someone please be kind enough to explain or point me to a link on how to use a "Fire Wire" connection and a Mini-Mac to start this server.
I have seen it done before..... where a Mac system was started using the operating system on another Mac system. Do I need a particular application?
Thanks in advance <smile>

Thank you VERY much for your replies.
I'm thinking that the operating system on this server must be unstable. I know that Disk Warrior has been run on it in the past. Plus AFP (Apple File Protocol) failed to launch after a restart recently. But getting all of the updates fixed that.
Since this is a CRITICAL server I think what I will do is give them an estimate for a brand new main boot hard drive and set the current hard drive aside as a fall back position.
It looks like Snow Leopard (10.6.**) requires an Intel Processor.
This XSERVE is a G5, RackMac 3,1 with Dual 2.3 processors and it looks like they are not Intel based processors????? But "PowerPC" based processors?????
If that is correct I will see if I can locate there copy of Tiger Server. They just bought SEVEN IMac's running 10.6.2 Snow Leopard and you should be able to get more then six years on a VERY expensive full blade server like this.
Anyway, in the mean time, I really need to see how to boot this server from a known good G5, AKA "Target Disk Mode"
I found a link and will try it either this weekend or the next. I work on a lot of week ends at the companies that I support to stay out of the way of the end users.
http://blogs.techrepublic.com.com/helpdesk/?p=293
Once again thank you all VERY much ........ "Live long and prosper" <smile>

Migration Assistant Won't Recognize "old" MBP via Fire Wire

I purchased a new MacBook: 2.16 GHz, Intel Core 2 Duo, 1 GB 667MHz DDR2 SDRAM, 160 gig drive
As usual when I get a new Mac, I erased the drive installed OS X.4.11-Tiger and personalized the mac.
Along the way, something odd happened. I cannot double click on any application and open it—unless—I place its alias into the dock. Then it opens.
I have run disk repair as well as permissions repair to no avail.
Want to use Migration Assistant to transfer files from my MBP to the MB. However, when I connect the Fire Wire, restart the "old" MBP with the "T" key depressed, the firewire wheel shows—but—the MB will not recognize the MBP. So, I can't transfer any data.
MBP has OS 10.4.10 while the MB has OS 10.4.11. Could this be the issue?
Anyone have any ideas as to how I can get past this?
Thanks,
Tek

I have the exact same problem. When setting up the new MacBook, I attached the firewire cable and restarted the PowerBook into target disk mode. The Firewire symbol appears on the screen but the MacBook gives the error message "There are no versions of MacOS X available on your old Mac". I wanted to test if it is a problem with the MacBook, and found that the MacBook will recognize and mount a portable firewire hard drive. Furthermore, when I tried attaching it to an intel iMac, it recognized it and was ready to import files from it. Therefore it seems that the problem is that the OS X 10.4.11 on the PowerBook is somehow 'invisible' to the MacBook migration assistant. I tried repairing permissions on the old PowerBook, but that didn't help. In the meantime I also ran software update on the MacBook, which brought it up to the very latest version of Leopard.
Could it be that the version of OS X needs to be the same on both machines? Next I am going to backup the PowerBook, then upgrade it to Leopard, then try again. I am surprised more people haven't had this problem, at least I have seen few postings about it.

I am getting an error message from my pictures and video I purchased

The error message says:
Some of the videos in your iTunes library, including the video "Picture 047", were not copied to the iPod "my name" because they cannot be played on this ipod.
I have a new Ipod, I just got it 2 weeks ago, and was able to get music, what gives??

Hi-
What machine?
Try a logic board reset:
Unplug ALL connections to the tower and unplug the AC cord.
Allow the machine to sit in the disconnected condition for 15-30 minutes.
Reconnect all cables and power and try again.
After that, possibly a PRAM reset, more probably a NVRAM reset would be worth a try.
Final steps would be a PMU/SMU reset.
For troubleshooting the software end, try refreshing the profiler (Command+R) after unplugging and replugging a fire wire device.
Next, try a different user account, followed by a reinstall of OS X.

Error Message - Getting back to factory settings

I have tried everything that I have read on here to try and get my music back on my iPod...and nothing has worked. I have a 20GB click wheel iPod...sorry for the length of this in advance!
While updating my iPod, it decided to stop working (iTunes froze up). When I plugged it in again I would get an error message saying that iTunes could no longer read the contents of my iPod, and to use the updater software to get it back to factory settings. I have uninstalled and reinstalled older versions of iTunes, the newest version, along with the more recent updater software, and nothing is working. I have also tried resetting my iPod manually - through the menu and by holding the menu and select keys down. Also, I am not sure if this means anything or not...but when I plug in my iPod with iTunes running, and I get the do not disconnect screen, there is also a circle made up of 2 arrows in the top left hand corner that i have never seen before. Has anyone else experienced this problem or is there a known solution for this? Any help would be greatly appreciated! Thanks for the help!
Rach

I did some reading in the Connections forum...some people seemed to have solved their problem similar to mine by using fire wire - so I went out and bought a fire wire card...but guess what - no luck!
This time I did get an error message though with a number...it is: "Attempting to copy the the disk "Rachel" failed. An unknown error occurred (-124)." Is it time to just throw the iPod out?
On another note, I put a new hard drive in my computer, formatted it, and tried getting the synch to work. No luck there either. I started off with the software that came with my iPod, and gradually moved up to the new versions. Nothing worked - it always froze on song 25 (and they were always different songs because I always tried a different library). I hate to say it, but I feel like I have tried everything and anything to get this to work, and nothing seems to do the trick. I don't understand how the people in the Apple store said it worked fine and they had no problems getting anything to synch on here. I am not trying to sound rude here...i am just a bit frustrated! If you can think of anything else B that might help out, I would appreciate it If not...then it might be time to call it quits and never look back at Apple again!
Thanks again for the help B - it is greatly appreciated!!
Rach

Error Message "Internet Connect"

I am receiving (last 48 hours) an error message on start up and periodically throughout the day the reads "Internet Connect-Could not open the communication device".
My internet connection is fine and all my connected devices seem to be working fine except one - an external drive 'LaCie big disk extreme+' (1 Tera bite) using fire wire 800 daisy chained with two (2) other external drives a smaller LaCie and a 1 Tera bite Maxtor. The 'LaCie big disk' shows up on my desk top but not in my Finder which makes it not useful when saving files from programs. All of the other external disks shoe up in the finder and desk top.
Any ideas on what is going on with the error message and how to get the LaCie to show up in my Finder?
Kylake

i'm having the same issue. when i start up my iMac the internet connect window pops up and says "could not open the communication device. although 30-45 after it pops up the computer will make a connection. it is annoying and would like to find a fix. any ideas??

Windows Easy transfer , ERROR message when trying to copy settings to Win 8 PC

I have a new hp-TouchSmart Envy 23. It has 2TB drive.
I want to use Windows Easy Transfer to move all my settings and data from the Windows 7 machine to the new hp-TouchSmart (my older PC is hp desktop is model # m9177c and has Win 7 OS) .
I have used easy transfer many times and I am reasonably experienced user .
I just cannot transfer my settings and data to my new PC. I have therefore copies all my data to the hp-TouchSmart . However I need to use Windows easy transfer to move all my settings. I have a very large number of settings , macros and much else that would take a very large amount of time to re-type.
I get an ERROR message when I want to transfer my settings. It says I don’t have enough disk space. The file I want to transfer is only 10.5 GB (after I removed all my data). The new machine has 2TB and yet I keep getting this error.
I have tried every possible way of transferring the settings , including : external drive; flash drive; direct wire ; easy transfer cable etc. I keep getting the same ERR message .
I am sure Easy transfer must allow transfer from Win 7 to Win 8. BUT HOW?
PLEASE do help. I would really appreciate very much .
THANK YOU
Adam

This thread may be useful.
Windows Easy Transfer will transfer from one drive to the other to mirror the original drive. What I suspect is happening is that the program is grabbing the D drive (recovery partition on most systems) and trying to transfer it to the new system which should also have a D drive. If that is happening,t hen that error will be thrown.
Try using the advanced options and view the report to see what exactly is happening and triggering the message.
Let me know what happens.
The document in the thread is for a previous version of Windows, but you can search for Easy Transfer Reports from the Start screen in Windows 8.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

RE: X1 Carbon windows 7 Professional 64bit error message

Hi, Good Morning Everybody, I wish somebody here would advise me of my problem, Thanks.
Problem of Laptop
=================
[Message 01]
Hi, I bought X1 Carbon and found an error message when right click on the
1st page after startup. The error message reads
Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: C:\Windows\System32\igfxsrvc.exe
File: D:\Program Files\Microsoft Visual Studio 9.0\VC\ATLMFC\INCLUDE\
atlcom.h
Line:2475
Expression: 0&& "Release called on a pointer that has already been
released"
For information on how your program can cause an assertion failure, see
the Visual C++ documentation on asserts.
(Press Retry to debug the application)
By right, right click should show the menu of View, Sort by, Refresh,
......Screen resolution, Gadgets, Personalize, but just cannot access
into the right click menu immediately. I have to wait more 3 minutes and
get out of the error message, then the right click menu appear. Why is
this so?
Please advise how to eliminate the message and have the right click menu
immediately. Should I bring the laptop to your service center for repair
or you can email me the steps to solve this problem.
Regards, Simon.
[Message 03]
hi, head of customer service,
below is a chat log i had online for your review. My concern is that
everybody work for a living - if u r the specialist in this field, i
respect that u can foresee what is going to happen if u tell somebody who
is not a specialist to do a specialist's job. U should be able to provide
advice n the possible outcome if things do not work out right, because it
is the end user who needs to face it n live with it. Take for example, if
the office building was on fire n the human instinct is to fight fire
first. But the workers do not have the proper knowledge of fire n also
not equipped with good PPE. This worker probably called the fire
department to report a fire, n at the same time the fire department
specialist at the other end of the line told that worker to
"troubleshoot" the fire without giving him the possible outcome if the
fire blown out of scale, what price this worker will have to pay.
My questions are:
a) what is the goal of having on-line chat service? Is it to resolve
simple technical issues, that's why an average IT worker can do the job?
b) if the end user already knew the problem he is facing and he is
expecting the best advice/solution from an expert rather than from an
average IT worker, would it be better for the end user to go straight to
email? Or straight to the service center?
c) Is there a team work spirit between your chat section and service
center? Is it going to take a long time to communicate among themselves
when they face the same problem real time - meaning they can't talk to
each other over the phone to resolve the same problem which the end user
is facing? If they can discuss over the phone, and possibly the service
center also share the same steps to resolve the problem but could not be
sure if something goes wrong, the os of the laptop need to be
re-installed. Then, the end user would not have to do a double job - to
chat online and go down to the service center only find out that it is
the same answer. Would it be better for the chat person to do the double
job internally for the end user?
[Hi, I bought X1 Carbon and found an error message when right click on the
1st page after startup. The error message reads
Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: C:\Windows\System32\igfxsrvc.exe
File: D:\Program Files\Microsoft Visual Studio 9.0\VC\ATLMFC\INCLUDE\
atlcom.h
Line:2475
Expression: 0&& "Release called on a pointer that has already been
released"
For information on how your program can cause an assertion failure, see
the Visual C++ documentation on asserts.
(Press Retry to debug the application)
By right, right click should show the menu of View, Sort by, Refresh,
......Screen resolution, Gadgets, Personalize, but just cannot access
into the right click menu immediately. I have to wait more than 3 minutes and
get out of the error message, then the right click menu appear. Why is
this so?
Please advise how to eliminate the message and have the right click menu
immediately. Should I bring the laptop to your service center for repair
or you can email me the steps to solve this problem.
Regards, Simon.]
[Message 02]
[GoToAssist (10:11:53):
Connecting...
GoToAssist:
Dear Customer,
Thank you for contacting Lenovo and showing your interest in Lenovo
instant support program. I see you have a question on your product. I am
going to take few moments to review the information of your product and
message you back, right here, very soon. Please add this page to your
favorites, in case you get disconnected or close your browser, so you may
come back to this conversation.
Saraswati (10:12:25):
Thank you for contacting Lenovo Technical Support. My name is Saraswati.
I will be happy to assist you with this issue.
Saraswati (10:12:30):
Hello Simon.
Saraswati (10:12:35):
Good Morning.
Saraswati (10:14:47):
Simon , Have you checked with the steps I have provided in the earlier
session ?
SIMON (10:14:55):
hi, i just lost the session chatting with u. Can u show me all that again
here?
Saraswati (10:16:14):
Sure , Let me paste the conversation in this session.
Saraswati (10:17:26):
Saraswati (06:54:46):
Thank you for contacting Lenovo Technical Support. My name is Saraswati.
I will be happy to assist you with this issue.
Saraswati (06:54:59):
Hello Simon.
Saraswati (06:55:05):
Good morning.
Saraswati (06:55:35):
Please be connected to the session while I check with the query.
Saraswati (06:59:38):
It appears we may have been disconnected. Please respond so that I can
confirm our connection.
SIMON (07:00:27):
Hi, yes I can see u r writing....
Saraswati (07:00:58):
May I know the operating system installed? Windows Xp, Windows Vista,
Windows 7 or Windows 8? Is it 32-bit or 64-bit?
SIMON (07:02:20):
it's windows 7 64bit, the laptop is i5-3rd gen with 4gb ram
Saraswati (07:03:36):
http://www.intel.com/support/graphics/sb/cs-003927.htm please click on
the link to fix the issue.
Saraswati (07:05:49):
Let me help you with the latest graphics driver
Saraswati (07:08:14):
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g1d625ww.exe
Intel HD Graphics Driver for Windows 7 (64-bit)
Saraswati (07:08:25):
Please install this link.
Saraswati (07:09:01):
Before installing uninstall the same form the device manager under the
display adapter option.
SIMON (07:10:21):
hi, the link u recommended mentioned something like reinstall graphics
drivers. I don't have the drivers n think it's pre-installed inside X1
Carbon. My concern is what is the worst case it could be if I execute the
link file n something goes wrong?
Saraswati (07:12:28):
Simaon , I would like to inform you that it is only the driver
reinstallation. It will hamper the system performance. It is the driver
provided with the preloaded OS. Hence it should not cause any issue.
SIMON (07:12:48):
btw, the os is windows 7 professional, hope i get it right.
Saraswati (07:13:09):
However please check by uninstalling and reinstalling the Microsoft
Visual C++ .
Saraswati (07:13:31):
Yes , I have provided the link for the Windows 7 OS 64 bit.
Saraswati (07:13:58):
Please check with the above steps. This should fix the issue.
Saraswati (07:16:32):
Please feel free to get back to us at any moment , we will resolve all
the issues related to the Lenovo Machine.
Saraswati (07:17:32):
It is been my pleasure assisting you with the issue.
SIMON (07:18:06):
ok, i take some time to do this, how to get back to u? do i need to
re-boot the laptop during the process? Please don't tell me i need to
re-install the os again if everything fail, because there r some
3rd-party software which i do not have the original serial
Saraswati (07:19:18):
Please reinstall the drivers from the driver link. Then restart the
machine and check if the issue persists.
Saraswati (07:19:57):
If still the issue persists then reinstall the Microsoft Visual C++.
Saraswati (07:20:12):
Hope this information is helpful
Saraswati (07:20:27):
Thank you for choosing Lenovo's chat Support. Kindly note, that there
will be a customer satisfaction survey once you close this chat session.
Please provide your valuable feedback for the chat session with me on a
rating scale between 0 to 10, where 9 to 10 being satisfied with the
service provided.
Saraswati (07:20:33):
Please note that the survey is only for current interaction. If you have
any comments or feedback, please mention same under customer comments.
Our team will take actions based on these comments to help us to serve
you better. Thanks for your understanding & Support.
Saraswati (07:20:44):
Thank you again for contacting Lenovo and have a great day Simon.
Saraswati (07:22:00):
You may close this chat session now.
SIMON (07:22:06):
hi, have any of your specialist face with this problem before?
Saraswati (07:23:22):
We donot remember , but we would have assisted in the similar manner.
Please check with the steps.
Saraswati (07:23:45):
Thank you for choosing Lenovo and have a great day ahead.
SIMON (07:24:48):
my worry is as i mentioned that i dont have the serials n it will be a
great price to pay for me if i miss some steps or something just not
right, then i would rather leave it as it is.
Saraswati (10:17:51):
Saraswati (07:25:43):
You can visit the nearest service center , so that the service technician
will help you further.
Saraswati (07:26:29):
Please contact on "800 6011 343 (Local number only) +603 8315 6856
(DID)"-- singapore
Saraswati (07:27:03):
Contact on the above numbers the concerned team will provide you the
address of the service center.
SIMON (07:27:55):
do u think the technician is more capable than any on-line chat engineers
because they can see the real problem of the laptop?
Saraswati (07:28:54):
The steps I have provided should fix the issue. If you need any further
assistance please visit the service center.
SIMON (07:30:37):
if they r just feedback to me with the possibilities i already perceived,
then it's not worth the trip for me to take time off work n travel
2 hours to n 2 hours fro your repair center.
SIMON (07:33:51):
My question is that "is it very difficult to comm between u and the
service technician side, then feedback to me online? so i dont have take
time off work n i also have to face my boss n it will look bad on me.
Please be more considerate?
Saraswati (07:36:02):
Simon , I understand your concern. Please check with the steps I have
provided and get back to us if the issue is not fixed. if you are
doubtful that the above steps might delete any of your files then you can
visit the service center , so that the service technician will check with
the issue personally.
Saraswati (07:36:47):
Thank you for choosing Lenovo and have a great day ahead Simon.
Saraswati (10:23:17):
Is there anything else that I can assist you with, at this moment ?
SIMON (10:23:26):
ok, I will take your advice n talk to some IT guys b4 i act on it, to be
sure that i made an informed decision. if i really have doubts, then i
would have to suffer in silence n just live with that error message for
the time being.
Saraswati (10:23:53):
Alright.
Saraswati (10:24:23):
Thank you for contacting Lenovo and have a great day Simon.
Saraswati (10:25:09):
You may close this chat session now.]
Regards, Simon.

Dev environment - i mean Visual Studio
But fist try to check in Event viewer if there's any error message that could help to find what the actual problem is.
Regards
Bartek

Fire Wire Error Message:

Similar Messages

Maybe you are looking for