Firefox 17.0.2 for Solaris 10 (sparc) (contrib) not available

There is a security finding on Firefox 17.0.1 (CVE-2013-0759), and we need to install Firefox 17.0.2 for Solaris 10/sparc. We have to use the 17.x series. For some reason the "ftp://ftp.mozilla.org/pub/firefox/releases/17.0.2esr/contrib/" directory is empty.

Has there been any additional info from Oracle as to when they might update Firefox for Solaris 10 SPARC beyond 10.0.7 ESR (''aka Patch ID #145080-12'')? I have not been able to find the referenced package for 10.0.12 ESR within MOS. Realistically, I really need 17.0.5 ESR or later -- the contributed versions are not an option due to their questionable source (''i.e., Beijing'').

Similar Messages

  • OEM 12c for solaris (sparc) disk2 download failed

    I am trying to download OEM 12c for solaris (sparc) from below link but disk 2 download failed after 80% with a error saying connection to server closed. I tried it couple of times with different browsers even from different machine but still same error. Disk 1 downloaded successfully but disk2 always failed right at 80% after 2.4 GB downloaded. It makes me belive that it is a problem related to source file or server. Anyone has similar experience and know how to get it solved?
    Appriciate for your help.
    http://www.oracle.com/technetwork/oem/grid-control/downloads/solsoft-094433.html

    I can't download it either, and nor can any of my colleagues, using any browser. I am in UK, I suspect there's an issue with the Oracle mirrors, and that if you are downloading from US it probably works fine. Can someone from Oracle investigate this please?
    We consistently get the same result: the downloaded file is: 2,732,571,489 bytes, rather than 3,430,333,041 bytes. It will not unzip as it is not a valid archive, error message:
    bash-3.2# unzip em12_solaris_sparc64_disk2of2.zip
    Archive: em12_solaris_sparc64_disk2of2.zip
    End-of-central-directory signature not found. Either this file is not
    a zipfile, or it constitutes one disk of a multi-part archive. In the
    latter case the central directory and zipfile comment will be found on
    the last disk(s) of this archive.
    unzip: cannot find zipfile directory in one of em12_solaris_sparc64_disk2of2.zip or
    em12_solaris_sparc64_disk2of2.zip.zip, and cannot find em12_solaris_sparc64_disk2of2.zip.ZIP, period.
    However, this error message is caused by an invalid / incomplete zip file.
    I have also tried Oracle Edelivery site with same result.
    TIA!

  • How can I install Oracle Database 10g for Solaries (SPARC) from the console

    Dear Forum Members,
    In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
    If yes. Then How?
    If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
    Thanks
    Aungshuman Paul

    There are 2 possible ways to accomplish this.
    First,
    Silent installation
    http://www.informit.com/articles/article.asp?p=174771&rl=1
    Second, (cut/paste from other site)
    How to install Oracle software remotely?
    Remote Software Installation Steps: (For Solaris only)
    If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
    For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
    1. Pick your source server or machine for remote installation.
    2. Check that your CD is in your source CD-ROM drive.
    3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
    4. On the source machine, login as a user.
    5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
    6. Become root user by typing: su (don’t use -)
    7. Check that Volume Manger is running. # ps –ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
    8. If not then do the following: # mkdir –p /cdrom/your-cd-file-name
    9. # mount –F hsfs –r cdrom-device /cdrom/your-cd-file-name
    10. Add the following line to your /etc/dfs/dfstab file: # share –F nfs –o ro /cdrom/your-cd-file-name
    11. Verify whether your source machine is an NFS server: # ps –ef | grep nfsd
    12. If you see an entry that contains /use/lib/nfs/nfsd –a 16, then nfsd is running and skip to Step 16.
    13. If nfsd is running, then type: # /usr/sbin/shareall
    14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
    15. Verify whether your source machine is an NFS server again by typing: # ps –ef | grep nfsd
    16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
    17. Now, log in to the target machine by type: # rlogin target-machine-name –l user (not root)
    18. Then log in as the root user by typing: # su
    19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
    20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
    21. # mkdir /remote_products
    22. # /usr/sbin/mount –F nfs –r source-machine:/cdrom/your-cd-file-name /remote_products
    23. # cd /remote_products
    24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
    25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

  • Latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems download.

    Hi All,
    I hope someone can assist as this has given me a headache for the last few days.
    I require the latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems.
    I require the ISO and not just the Patch set.
    Please advise.
    Kind regards,
    Paul

    The current ISO (october) is available at the usual place : EIS for Partner
    And for information, the next planned EIS will be available very soon but not this month.

  • HELP!  I tunes wouldn't update so I tried to delete and reinstall.  I keep getting a message stating the installation source for this product is not available.  Verify that the source exists and that you can access it.  please help!!

    Help!  Itunes wouldn't update so I tried to delet and reinstall.  I keep getting a message: The instillation source for this product is not available.  Verify that the source exists and that you can access it.  I also get this message:  The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes64.msi' in the box below.  Help I have no idea what that means or how to fix it. 

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Master Gateway node for the domain is not available

    Any hints in the catalina.out, exceptions.log, node.log or domain log files?

    Hi All, We are using Informatica 9.5.1 and Oracle 11g as by metadata DB. Initially our INFA_DOMAIN_REPO password was expired, so we couldn't connect to repository. Then we reset the same password and we restarted infa services also. But when we tried to connect repository we faced "Failed to connect repository" error. When i try to connect to Admin Consol, page was not displayed. When we check the node.log file it had a error message saying "2014-07-20 04:45:37,553 ERROR [Monitor Guaranteed Message Logger Thread] [CCM_10322] While logging messages to the Log Service, the following error occurred: [[DOM_10022] The master gateway node for the domain is not available. Electing another master gateway. Wait for the election of the master gateway node to  complete. If the problem persists, verify that the master gateway node is running.]. Fix the errors written to the node.log file. com.informatica.isp.domainservice.exceptions.ISPMasterNotAvailableException: [DOM_10022] The master gateway node for the domain is not available. Electing another master gateway. Wait for the election of the master gateway node to  complete. If the problem persists, verify that the master gateway node is running" We checked all the env variables and all looking fine.Node is also running. Please help to uderstand this issue ans the fix. Thanks in advance Regards,JP

  • Find the Employees for whom Manager is not available

    Hi
    I wish to find all the Find the Employees for whom Manager is not available?
    Can anyone Pls throw some light how I can?
    Regards,
    Sreeram

    Hi
    Get all the Positions without "A002 - Reports" Relationship from table HRP1001 (excluding A002 from input screen).
    After finding the positions, get ee no.s for those positions from table PA0001.
    Hope this helps.
    Best Regards
    Reddy

  • Adobe Anchor Service CS4 Error 1612. The installation source for this product is not available.

    Hi,
    I've been trying to install CS4 Design Premium, except that I got this message:
    Adobe Anchor Service CS4
    Error:
    Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access it.
    What is wrong and how do I fix it? I've installed this on my sister's laptop as well, but I've already uninstall it. Could this be the reason why?
    Help appreciated, thanks!

    Contact Adobe Technical Support for CS4 installation issues.
    The problem has nothing to do with the fact that you already installed the same software on your "sister's laptop as well." And although you have already uninstalled it (and hopefully deactivated it as well), please remember that this software is licensed for a single user! You and your sister cannot somehow share the license. 
              - Dov

  • Folder Specified for Temporary Files is not Available

    Whenever I start PS CS, I get a "The Folder Specified for Temporary Files is not Available" error message. How do I fix this?
    Thanks!
    JB

    >F is internal.
    Doesn't proof that it's working. Disable it (as a scratch disk). See what happens.
    Rob

  • Error: Preceding document required for the invoice is not available

    Dear SRM Experts,
    We are on SRM7.0 with SAP 4.6 C as backend SAP R/3 system (Classic Deployment).
    When we try to create an invoice in SRM wrt a PO ( with item category B ... created from a limit SC with invoice only option), we get an error :
    Line 1: Preceding document required for the invoice is not available
    We are not sure ..why this error is coming and what preceding document system is checking ?
    As the PO is with item category B.. the GR is not required
    Any inputs will be highly appreciated..
    Thanks and Regards,
    Ram

    Hi!
    This error usually comes up when the PO has the flag GR_BASEDIV set. Please check your PO and verify if it is flagged.
    Best regards,
    Christian Zeuch

  • "the installation source for this product is not available" error message

    I was following directions to update to i-tunes 10, and my computer was trying to shut down in order to restart. It froze, and would not turn off, so I turned it off manually, then restarted. I got distracted and did not wonder why i-tunes did not finish installing. Tried to open i-tunes later from the desktop shortcut and it said something about not being installed all the way, so the shortcut was not valid.
    I tried to uninstall all the i-tunes stuff, in order, from my computer to try installing it again, and I cannot uninstall i-tunes!! It gives me this error message; "the installation source for this product is not available" and then gives me a file name to search my computer for, that can't be found. I MISS my i-tunes. Please help! How do I get the old i-tunes version off my computer?

    I tried to uninstall all the i-tunes stuff, in order, from my computer to try installing it again, and I cannot uninstall i-tunes!! It gives me this error message; "the installation source for this product is not available" and then gives me a file name to search my computer for, that can't be found.
    These sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp, restart the PC and try reinstalling iTunes. Does the install go through properly this time?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Invoice message Preseding document for the invoice is not available.

    Hi .
    when I want make the Invoice process to PO the system show the header Message
    Invoice message Preseding document for the invoice is not available. 
    even the Po recepcion is made into SRM.
    any suggestions
    thanks .

    Hi Oscar
    It seems the PO has GR Based Invoice Verification indicator active. IN that case system will look for the confirmations/GRs for this PO in order for you to post an invoice for this PO.
    Regards
    Virender Singh

  • Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

    I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

    It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
    Regards.

  • Error: -1612 The installation source for this product is not available. Ver

    Hi,
    I am trying installing the FA in SAPB12005A SP01 PL36. and I received this error message:
    Error: -1612 The installation source for this product is not available. Verify that the source exists and that you can access it.
    How can I resolved this?
    Regards,
    IAN

    I am getting the exact same error. How come anyone else did not get it?
    The procedure I followed was :
    Downloaded and installed the "download manager" first.
    Then selected all product updates from BOXI3.1 Enterprise
    It downloaded 58 items. After an inquiry I came to know that you need to install only the latest patch, i.e. Patch 1.7 will include all previous patches. So I was running 1.7 and getting this error constantly, and unable to install it at all.
    I tried downloading it from different places and networks, same error persists.

  • Catigory for HP p2 1334 not available - it is not a NB or a desktop

    Help
    catigory for HP p2 1334 not available - it is not a NB or a desktop
    Retired

    Hi:
    If whatever HP device you have that is a p2 1334, you can find how to get to the support page for it by reading the info at the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03754824&lc=en&cc=us&dlc=en

Maybe you are looking for