Firewire device looses connection when external screen is inserted into the thunderbolt port? HELP
HI
I am a recording studio engineer. Ive got a Firewire AD/DA Converter (Focusrite Saffire Pro 56) running from my Firewire port of my MacBook Pro, which is running OSX Mavericks. I've also got an external Screen I want to use as an extended display. I'm using a HDMI cable from the screen to a HDMI to Thunderbolt Converter which I then plug into my Thurderbolt Port.
As soon as I plug the screen in, the Firewire Port looses connection completely and I cant use or even choose the Saffire Pro 56 as audio driver. Another thing happens where the Thunderbolt port replaces the Saffire Pro 56 Driver with the screen as the audio output source.
Please help, there's nothing I can find to fix this.
Thanks Maurice
You don't mention which model you have, but this is from the M-Audio Firewire 410 Manual Troubleshooting section:
The FireWire 410 has been designed to give you high performance and professional quality audio. It has been tested under a wide range
of systems and operating conditions. In the real world, however, there is a nearly infinite number of possible operating scenarios, any of
which could affect your system’s performance. Much like owning an automobile, “your mileage may vary.” This section can not begin to
cover all possible issues you may encounter, however we want to give you some suggestions on common problems you may experience.
One thing to avoid is connecting too many devices. The FireWire bus is a dependable, high-speed, high-bandwidth protocol which is ideally
suited for digital audio. Nonetheless, it’s important to remember that audio and multimedia streaming places considerable demands on
your processor and the FireWire bus. Although it is theoretically possible to chain many multiple FireWire devices in series, doing so may
potentially degrade your audio performance.
I guess this degradation could also affect the Firewire HD. Maybe there is a simple fix, but it sounds like the M-Audio people have been down this road before.
Similar Messages
-
i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel
Hi glomp,
From the information provided, it sounds like your device may not be fully recognized by iTunes. Here are two articles (depending on your computer's operating system) for troubleshooting this:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Have a good one,
- Ari -
when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?
- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button? -
My apple ID is not recognised when I try to sign into the cloud, any help?
My apple ID is not recognised when I try to sign into the cloud, any help?
You can't sign into iCloud using your Apple ID on a PC, you have to sign in with an existing iCloud ID. You have to first create your iCloud account on an iOS device or Mac. Then you can sign in with the ID on your PC.
-
With an 11"-inch Macbook Air (mid-2012) using a mini DisplayPort-to-VGA adapter plugged into the Thunderbolt port:
Can you configure an extended desktop with an external monitor (20") displaying full portrait mode (1200 x 1600 resolution) and keep the built-in display in landscape?
I'd like to see something like
External monitor / Built-in displayYes, I can't see why not.
Just give it a try and report back if you have a problem. -
Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port
Yes, but you might want to note that the port on the AirPort Extreme is only USB 2.0, and that it runs at about half the speed of the USB 2.0 port on a computer, so things are going to be quite SLOW as far as backups are concerned, or anything else for that matter.
-
I run SmartBoards connected to iMacs running 10.7 and 10.8 throughout my school. On one of these computers the mouse has recently started freezing the minute a SmartBoard is plugged in to the USB port. The mouse 'runs' to the bottom right side of the screen, a cloud often is under the pointer, and it is not longer interactive. You can move the mouse upward a bit with the cloud following some of the time but it does not work. Once the SmartBoard is unplugged the mouse works normally. This particular computer worked fine with the SmartBoard until recenlty. Any solutions or ideas?
1. Reset the Pram and SMC
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ph14222
If these don't relate to your computer a quick web search will get you details
2. Run the Disk Utilty to verify the disk and then repair permissions. -
When I plug my ipod into my desk top my computer will not recognize the ipod in the usb port. I checked my usb port with one of my flash drives and it works fine. My ipod is in stuck in recovery mode, so has to be gone thru on itunes. Please help me
Yes, I think so... But what's odd here (to me) is that it actually matters what song the iPod was playing before being connected to that USB port. What happens if you connect the iPod when it is not playing any song? It seem like either the car audio system knows where to look for the iPod's song files, or it doesn't.
If you have a USB flash drive, try putting a few song files on it, and connecting it to that USB port. That's probably the primary reason for that USB port, so customer can attach USB flash drives with song files. If that works, and you can properly browse and play songs from the USB flash drive, you should just get a $5 8GB USB flash drive, fill it with your "car songs," and leaving it connected to the car audio system. That would be more convenient that remembering to connect and disconnect your nano all the time, and less wear-and-tear on the nano. -
hi
im a newby to this but i really need help fixing my macbook air a1369 2010 model display screen, i have replaced all new but its just dead a black screen with no power getting to it at all even the backlit led is dead so the inverter isnt getting power to it either. everything works perfectly through another monitor hoocked into the thunderbolt port, its just theres no power going into the built in display.
i would really appreciate some pointers as to whether theres any fuses that i could change or any pointers on getting the display to work at all. thank you for taking the time to read this and hope you can help a newby get back up & running.Confused, if you just had screen replaced was it working when you picked it up? I'd call whoever fixed it and report it ASAP.
-
Applications crash when external screen connected
When you connect an external screen (i.e. BENQ FP731) on a MacBook Pro 15" applications like Word (11.2) or NetBarrier X4 crash unexpectedly. Has anybody the same problem?
Problem seems to be resolved in Leopard.
-
When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
I downloaded the new version of itunes and when i plug my phone into the computer and try and do something in itunes it wont let me because my device is synced to another itunes library. how do i get my old itunes back? or how can i sync my stuff into the new itunes with out deleting anything off my phone? HELP
Copy the iTunes folder from the old computer to your new one.
-
So I saw that my software needed to be updated, so I did it over wifi, then a picture with the plug being inserted into the iTunes logo appears on the screen when finished the install. I plug my iPad 2 into the connector and iTunes sees the iPad 2 connected. Then a window opens that says to restore to use iTunes. I click restore and a second message appears stating something to the effect "Are you sure you want to restore to factory setting all info will be lost."
NO I don't want to loose everything.
My iPad only powers on with the image of a cord pugging into the iTunes logo. I can't get past it and I don't want to restore the iPad 2 to factory settings.
What do I do?
Any help would be appreciated.
FrankUsing iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Cheers, Tom -
When I plug my iphone into the computer to restore it I receive a "network connection timed out" message. However, when I plug in other iphones or ipod touches I can connect fine. Any help would be appreciated.
Try a powered external USB hub. It uses a 120V AC wall jack to power USB devices, and the Mac only needs to provide *just enough* to comminucate. Best Buy, Target, Walmart, ... about $20.
-
when i plug my phone into the mac i can see all of my mobile apps on an immitation of my iphone screen, how can i keep these apps in my itunes libraby on my mac as only a few are showing?
Ensure that you computer is authorized for all Apple IDs used to purchase the apps i(n iTunes Store>Authorize This Computer), then connect your phone to your computer, open iTunes and go to File>Devices>Transfer Purchases.
Maybe you are looking for
-
Can I use my iPad charger (12W) for my iPhone 6 plus?
Can I use my iPad charger (12W) for my iPhone 6 plus?
-
Po Creation Date and Orader Datate are holding the same values or diffrent?
Hi All, Please clarify on weather the PO Creation_Date at header level and Po Order Date at the Summary level both are having the same data or different. Thanks, Sathya.
-
Sampling data (I have a deadline for 12:00 AM!!!) PLEASE HELP!
Hello, I am getting data in such a format: 01\s\s343.43\s\s\3434\s\s454\r\n 02\s\s etc 03\s\s etc 04\s\s etc and from another source: 01\s\s343.4\s\s43.3\s\s\s545.6\r\n 01\s\s etc 01\s\s etc I am receiving the data from the second source (both are Po
-
No & Call ID field difference in service call
Hi all, Just wonder what is the difference of "No" & "Call ID" field in the service call? It seem that "Call ID" will count +1 whenever user open a service call even without create it. So what is the purpose of "Call ID"? Thanks
-
So I know how to directly import from the camera, but I've got all these .mts files I need to import from a hard drive. Each clip has two files it seems..the .mts and a .modd maybe? I gather from a google search this is a recurring problem, but I hav