FIRMWARE 4.1.108.32627 AND CLOUD DOWN [px4-300d]

after the installation the cloud down. It is impossible to erase it for a new installation. The router port 50500 is open.

Hello davidjose
Try restarting the unit unit if you have not already tried.  If there is no change please contact LenovoEMC support to create a support incident regarding the issue.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Similar Messages

  • Px4-300d copy job setup problem. Firmware version 4.1.108.32627

    Hello. 
    I have a wierd problem with copy job setup on my  px4-300d (4.1.108.32627) . I was able to set up one job, where I take a folder from my NAS and put it to a remote machine. That job ran fine. 
    When I go to setup a similar job but for a different folder, I have two possible outcomes: 
    1. When I go to chose the remote folder I see it fine and the job is setup fine as well. However when I run the job it throws an error. And in the log I see that instead of going to the folder I setup like "\\remoteserver\backupfolder" it's going to "\\remoteserver\u_myremoteserverusername\backupfolder" , which is obviously not there. 
    2. I can see my remote server, but I don't see my shares on it. I don't get no "Access denied" error or anything - I simply don't see any shares on that particular server. I do see shares on other servers, which use the same credentials. In addition the job that I was able to set up previously stops working. 
    Then when I reboot, the first job (the one setup successfully) may or may not properly run, yet I still cannot set up the second job. 
    I did check permissions and all the stuff that you would regularly check (connectivity, ports etc). Seems to me the script that is being generated from the UI is a bit too smart and is in fact outsmarting the NAs itself. 
    I also suspect that the fact that I could set up the first job and not the second is that the second job goes to a subfolder of a shared folder. Or that the shared folder's name starts with an underscore "_" . But these are just my guesses - I cannot verify this yet. 
    Any ideas how to fix this or how to bypass the problem? 
    Thanks. 

    Hello fimine
    I recommend double checking that the remote server's folders that are not being seen by the px4 are infact shared from that remote machine.  If they are not, copy jobs will have problems accessing the folders.
    I also recommend trying to use the remote machine's ip address for now to see if there is any change in behavior.
    If the issue does not happen when using the ip address, it my be an issue with how your network's DNS is setup.
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • My iPhone 4 was run over at work worked fine  for 5 days then got really hot and shut down. I can not get it to power back up. I have photos that were not backed up is there anyway that I can retrieve my photos from the phone?

    MY iPhone 4 was run over at work by a forklift the screen was badly cracked but other than that worked fine for 6 days. Then it got really hot while charging and shut down and will not  power back up. I have photos on this phone that we're not backed up to I cloud is there any way to retrieve my photos from this phone?

    No. You probably should have backed it up while it was working during those 6 days...

  • Photoshop CC 2014 stops working after less than 30 second and shuts down

    I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?

    You have not provided any system information or crash logs, so we can't really know.
    http://myleniumerrors.com/working-with-your-operating-systems-tools/
    Mylenium

  • SBS2011 and cloud solution advice

    Hi
    I have a client, they currently have an SBS2011 server looking after emails, redirected files, etc
    They also have a Server 2008R2 standard install on a separate server, this looks after Centrally Shared Files within the business
    Ok Broadband speed is standard ADSL 1MB up and 16MB down (so not great) Fibre Optic is years away.
    They have just got a new contract job which will take them a few years to complete. They will have key members working remotely for quite some time (yes they will pop back and forth for server synchronisations etc)
    However while they are working away they will need to store vast quantities of centralised data - data that they can access where they are and data that can be accessed by the main office.
    Due to broadband speeds VPN's are completely out, my thought would be an online cloud server, so a third server in essence which is located in the cloud which both parties site and main office can see.
    At first I thought about services like DropBox Team, and SkyDrive with Office365 and other services like that. The issue is they all require synchronisation tools that make every computer have to have a copy (the amount of data they will store over the years
    could easily get towards 1TB, this can not be stored locally on each users machines (500GB hdd and waste of HDD resources) Benefit though Drag and Drop folder access, of files like normal plus version control built in... woo :) 
    If you don't use the synchronisation tool you have to use the web interface, this is folder at a time, have to download, edit then use web tool to upload, and you can't upload folders and it becomes an absolute pain
    Before anyone suggests SharePoint on SBS... again this seems to be a webinterface for files single file downloads and uploads
    this is not an easy to use system
    Clients could well be dealing with folders of photos wanting to download whole batches, groups, a selection of files, editing a selection etc.
    They generally need that mapped drive folder drag and drop type interface, where groups of files can be edited etc, but without needing all files to be synchronised or antyhign complicated or selecting folders to synchronise, as they will never know what
    they need until they need it, etc.
    I was thinking maybe a VPS/Cloud/Dedicated server with Windows Server Standard installed on it, on the net might solve the problem , join it to the company domain remotely and then use that as a central store..... would I be able to map folders? would it
    work?
    Has anyone here had a similar setup need? and/or suggestions about the best way to do this? I mean the internet is just a big network, so surely a server located remotely should be able to be treated like a local server? the speed issues to a centralised
    server on the net would be alright for users to log into as dealing with a capacity of 100MBit/s where as the company local server can only down 16mbit/s and up 1mbit/s
    Thanks in advance
    Tris

    Hi Larry.
    I'm not sure that would help, unless I'm missing something (quite possible)
    As I say the main office broadband is absolutely dire 1mbit/s up and 16 mbit/s down
    There will be several users on site, all with their own laptops. To use RDS - would mean another 7 licenses of everything (that they already have on their laptop) to try and work in the main office from their remote location. - They will have laptops etc
    on site.
    The issue is access of centralised data. On site they will be collecting 1-3TB of data over the 2 years - each onsite will have 4G upload speeds or dedicated line upload speeds (the speed issue on site is not an issue)
    What we don't want is data spread over several laptops the people don't know who has what - also data needs to be backed up (can't trust users to backup themselves plus they'll keep their portable HDD next to their laptops)
    Main office also needs access to the data - plus on site staff may go back to main office every so often and need access to data there etc
    That's where my thought of a Windows 2008R2 standard server in the cloud came from - as Site will have good internet they will be able to upload data to that server
    As the office has reasonable download, they can access the data they require, when they require (thing that put me off services like Dropbox and OneDrive that require Syncing all)
    Everything backed up, everything accessible.... but I don't know if i'll be able to set up mapped drives to work just like a windows folder - these are basic users, trying to faff with FTP software or web interfaces they will not handle, they will get incredibly
    frustrated with as they will have hundreds of files to deal with ever picture session they do, etc.
    Hope that helps define the issue more
    Thanks
    Tris

  • G4 MDD FW800 starts up and shuts down after several seconds

    Hi all,
    My G4 MDD FW800 DP.1,48 starts up and shuts down after about 20 seconds. I Have reset PMU and checked battery voltage, witch was OK. (also had it out for 30 minutes with no power connected etc.) I have video and also tried with NOTHING connected. But still it just powers down and failes to enter start up procedure.
    Last time I had it running I pulled my iPod, beacause the computer did't see it, the next thing I saw on screen was the message to hold the power button for 5 to restart, after that I got the problem described above.
    Anybody?
    Thanks,
    G4 MDD FW800 DP1,48 Mac OS X (10.4.2)

    Hi, I don't know how fast it shuts down, but...
    How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
    http://support.apple.com/kb/HT1939
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/ht1379
    In fact, do 3 in a row, takes a bit of time.
    Does it boot into Open  Firmware with CMD+Option+o+f ?
    http://docs.info.apple.com/article.html?artnum=42642
    reset-nvram (press Enter)
    set-defaults (press Enter)
    reset-all (press Enter)

  • When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes.  Any idea what to do to get the synch working?

    When synchronizing my iphone4 on the computer it errors out when optimizing the photos and shuts down iTunes.  Any idea what to do to get the synch working?

    OKay, here is the deal. You cannot change the location of encrypted files nor can you share them with other machines. There is no file server for iTunes so even if you export the movie index from iTunes to an external volume, each time you reboot your computer itunes has to reindex the external drive every time you want to access the files. The second you run your mobile computer without the external drive or try to access the HD movies from another device or another user on the same network, the indexing gets out of synch. The entire process is self defeating regardless. The HD movies are encapsulized by apple to stream to your devices via iCloud and NOT via Cloud. Only your TV can play 1080p. That single file you download from iTunes has mutiple versions of the same video in the capsul, one version for each type of apple device. There are no 1080p apple devices except for the Apple TV. When you buy a movie you are buying a license and not the movie. It's going to get worse with all the new copywrite laws. Already you cant share any apple devices with other itunes accounts. Your airport express just stopped streaming music to all users on the local home sharing Cloud. Only the one user for each device and soon only airplay speakers connected directly to the device. No more passthru via your TV and no more file sharing with other accounts on the same wi-fi. All the ISPs are doing the same thing. And soon everybody will be buying their phones and TV's and iPads from the cabble guy.
    Apple has done a poor job of educating the consumer as to the difference between the Cloud and iCloud. They are not the same at all.
    Message was edited by: ronfromwoodland hills

  • IPod Touch 2.0.1 Reboots and shuts down randomly

    I have an 8gb iPod touch on the 2.0.1(5b108) firmware that now reboots and shuts down randomly while just sitting idle. I've tried restoring and resetting and it still does this. In terms of the shutting down randomly it seems like my hold button is sticking or broken, but I can't explain the random restarting. This has only been happening since I updated to 2.0.1. Any advice?

    As posted before as m9performance but the forum would not let me logo on as that.
    This has been going on for some time now Apple was to fix this problem with the 2.0 update absolute rubbish it is now worse that before just turning it self off and resetting it self e.g. tonight from 17-30h to 18-45h it did this 3 soddin times.
    Where as before it would be about once every 3 weeks or monthly it is about time Apple started to honour their customers with a product that works e.g. it dose what it says on the box and plays music until the customer tells it not to.
    Come on Apple fix up and fix your product lots of people have mp3 players with out the touch problems like I have said before never mind bringing out a new bigger one 32G get the old ones working first. At the end of the day it is down to YOU Apple and not for the users to have to keep posting the same problems hoping that you as a company decide to fix your mistakes and eventually look after your customers.

  • Can't download music from the cloud. Cloud/down arrow will not go away, Any suggestions?

    iPod works fine. iPhone songs have cloud/down arrow and will not go away.

    I, too, am having this same issue with my purchased music. I have had every issue with iOS 7 and I'm at my wits end. I thought all had been corrected, and then last night I purchased an album, the first time since the update, and it absolutely will NOT download to my phone. I have had it with this iOS7 and one of the phones on my plan is due for upgrade, and I'm THIS close.... Please let me know if you find a solution or if yours is corrected.

  • Hi. There is a ghost search bar on my iMac screen which flashes constantly, even during start up and shut down. How can i make this go away? Please help. x

    Hi There is a ghost search bar on my iMac that flashes continually, even during start up and shut down. How can i make this go away? Please help. x

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • GE60 fan problem. speeds up and slows down constantly [EC reset done]

    My model is GE60 OCN and bios and EC is the newest ones for win7 embeded on msi website.
    I have the same problem with others if you search here 'ge60 fan'.
    The temperature between 50~60℃ the fans runs slow and really quite.
    But if the temperature goes down under about 46℃, it speed up and slows down constantly and it is annoying and much noiser.
    I think msi should provide new EC firmware for this. Even the temperature is low, it annoys and nosier than when the temperature is between 50~60℃.
    Please check this problem and provide new EC firmware for fan policy.
    Someone has uploaded video link: youtube.com/watch?v=OQjjjVOpsEQ
    this is exact problem with me as well.

    I have exactly the same problem. Let's continue in the other thread (https://forum-en.msi.com/index.php?topic=165613.0)

  • Scheduled Start up and Shut Down

    Hi,
    I am aware that it is possible to schedule the start up and shut down of a Mac OS X System.
    I have been trying this on my MBP and it just wont work. When we say start up does it mean startup from sleep? or does it mean a start up from cold state? I have tried at various instances and using all the options that are available in Energy saver preferences but to no luck...the start up or sleep schedule does not work.
    Any Ideas on this would be much Appreciated.Thanks

    Have all firmware updates (if any) been installed? This is a list. System Profiler should show your current firmware version.
    http://docs.info.apple.com/article.html?artnum=303880
    The only other things I can think of are to reset PRAM
    http://docs.info.apple.com/article.html?artnum=2238
    and if that does nothing, reset SMC
    http://docs.info.apple.com/article.html?artnum=303319

  • UPS and shutting down servers

    Not sure if this thread should be better posted at the OS X Server forum, but let's try it
    Today I found the time to connect the UPS to our XServe via USB. It worked great, the UPS appears at ServerMonitor and also at the system preference panels energy settings.
    However the UPS has only one USB port, but we have currently two XServes. My intention is to keep the servers running as long as possible till the UPS reaches 25 % left of its energy. Then safely shutting down the servers.
    While it is easy to configure this on the server the UPS is connected, I find no setting for doing so at the other system. Basically the "master" XServe (that connects to the UPS) should shut down its "slaves" (the other XServe specifically).
    I already dealt with a quite old system some time before (Cobalt RaQ) where it was able to set this up (via the MAC addresses if I'm not wrong).
    I would look forward if someone can give me a glue how to realize this on the XServe ?

    >Okay, writing a script... I guess you don't have anything already written
    Nope, sorry.
    >The main problem would be that both servers can communicate with each other only by using their WAN IPs. So we would need to get some security (like authentication with a username and password) additionally.
    If your servers have two NICs, there's nothing preventing you from creating a private network between the two using a simple ethernet cable between them. That way they can communicate privately.
    > When I connect the UPS with an USB hub and on that hub both XServes, could this work ?
    No. USB doesn't support this kind of topology. There can only be one bus master. The other machine won't work.
    >The UPS also has a serial interface, just the XServe lacks of this "old technology"
    On the contrary. The XServe has a 9-pin serial interface on the back. It's normally configured as a console port for out-of-band management but you can configure it as a standard serial port by disabling SerialTerminalSupport (in /System/Library/StartupItems). However, the issue is then how to read the serial port. I'm guessing the software that ships with the UPS is designed to use the USB port and you may be on your own there.
    >By the way, I should mention that the UPS is a Belkin "Universal UPS".
    I don't think it makes a big difference. You'll have the same issues with any UPS vendor.
    The only other option I can think of is a network-aware UPS. Some UPSes (such as those from APC) have a network option where you can query the UPS over the network. It would then be relatively simple to query the UPS via SNMP to gauge its runtime and shut down safely. I don't know if the Belkin has this option.

  • When I boot up my iMac and hold down ALT it boots straight into windows 7 without giving me the option to boot OSX back up. Have I lost OSX and all my files completely? Please help

    I set up boot camp for my iMac with windows 7. All was fine and it gave me the option to boot into windows.. I then used windows for a few hours and shut down the mac to boot back onto OSX when I was done.. This time my mac booted straight to windows 7 even with me holding down the ALT key it gave me no choice.
    I'm assuming the boot camp set up was wrong somewhere but is there a way to get back on to OSX now?? Please help

    1. Have you tried both Alt keys - maybe your Alt key is dead.
    2. Do you have wireless keyboard? Have you tried to change batteries? USB Keyboard?
    3. If your Win is installed correctly then you have also installed all windows support software.
    There should be Startup manager like on the Mac (next to the clock little bootcamp app or in control pannel) to restart your Mac into the Mac partition.

  • HT202159 I have been on to apps store logged in and gone on my purchurse to try and re down load Mountin Lion however it just states an error as accord I can't get it to re down load to launch pad in lion

    I have been on to apps store logged in and gone on my purchurse to try and re down load Mountin Lion however it just states an error as accord I can't get it to re down load to launch pad in lion

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

Maybe you are looking for