First alternative skin for the Neuf Box 4 : Arch Linux skin !
Since the last firmware version of the Neuf Box 4, it is now possible to customize its web interface with skins.
As I've not seen any skin yet, I decided to make my own, base on the design of archlinux.org.
The result is here : Arch Linux skin for the NB4
with details on how to use it.
Tell me what you think
Would you be willing to post a larger image? That one is so tiny that it is hard to see. It seems like a great project, and from what I can see, it looks good.
When I first read the description, "integrated access device" sounded like some corporate/marketing drivel. But, it seems like a great device: "DSL modem that supports ADSL, ADSL2+, and fiber connections. It also integrates a a WiFi access point and three-port Ethernet switch, an RJ-11 phone jack with analog-to-IP phone network adapter, a print server for USB printers (two host ports are provided), a USB device port for USB networking with a PC, and a special Ethernet port for connection to an available TV decoder box."
Wow.
Similar Messages
-
Event for the List Box in ALV Grid Control
Hello,
I have the below urgent requirment.
I have an ALV Grid Control built using ABAP Objects. In the grid, I have few fields and one of these fields is a List Box. Depending on the values selected, I need to enable or disable some fields. So, is there any event for the List box in ALV Grid Control.
For ex: I have 2 Fields, Designation and Commission. The designation field is a List Box field having 'Software Engineer' and 'Manager' as values. When I select 'Software Engineer', the commission field should be disabled. When I select 'Manager', the comission field should be enabled.
Early reply is hightly appreciated.
PriyaREPORT ZTEST1234 MESSAGE-ID ZZ .
DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_VALID TYPE C,
V_FLAG,
V_DATA_CHANGE,
V_ROW TYPE LVC_S_ROW,
V_COLUMN TYPE LVC_S_COL,
V_ROW_NUM TYPE LVC_S_ROID.
DATA: OK_CODE LIKE SY-UCOMM,
SAVE_OK LIKE SY-UCOMM,
G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
GS_LAYOUT TYPE LVC_S_LAYO.
DATA:BEGIN OF ITAB OCCURS 0,
VBELN LIKE LIKP-VBELN,
POSNR LIKE LIPS-POSNR,
COMISN(10),
CELLCOLOR TYPE LVC_T_SCOL, "required for color
DROP(20),
<b> HANDLE_STYLE TYPE LVC_T_STYL,</b>
END OF ITAB.
* CLASS lcl_event_handler DEFINITION
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
**Hot spot Handler
HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
<b>**Handler to Check the Data Change
HANDLE_DATA_CHANGED FOR EVENT DATA_CHANGED
OF CL_GUI_ALV_GRID
IMPORTING ER_DATA_CHANGED
E_ONF4
E_ONF4_BEFORE
E_ONF4_AFTER,</b>
**Double Click Handler
HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW E_COLUMN ES_ROW_NO.
ENDCLASS. "lcl_event_handler DEFINITION
* CLASS lcl_event_handler IMPLEMENTATION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
*Handle Hotspot Click
METHOD HANDLE_HOTSPOT_CLICK .
CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
V_ROW = E_ROW_ID.
V_COLUMN = E_COLUMN_ID.
V_ROW_NUM = ES_ROW_NO.
MESSAGE I000 WITH V_ROW 'clicked'.
ENDMETHOD. "lcl_event_handler
*Handle Double Click
METHOD HANDLE_DOUBLE_CLICK.
ENDMETHOD. "handle_double_click
<b>**Handle Data Change
METHOD HANDLE_DATA_CHANGED.
DATA: X_CHANGE TYPE LVC_S_MODI,
X_FINAL TYPE ITAB,
L_FLAG,
LS_OUTTAB LIKE LINE OF ITAB.
DATA: LS_EDIT TYPE LVC_S_STYL,
LT_EDIT TYPE LVC_T_STYL.
LOOP AT ER_DATA_CHANGED->MT_GOOD_CELLS INTO X_CHANGE.
IF X_CHANGE-FIELDNAME = 'DROP' AND X_CHANGE-VALUE = 'S/W ENGINEER'.
LS_EDIT-FIELDNAME = 'COMISN'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 8.
INSERT LS_EDIT INTO TABLE LT_EDIT.
INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB TRANSPORTING
HANDLE_STYLE .
else.
LS_EDIT-FIELDNAME = 'COMISN'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_ENABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 8.
INSERT LS_EDIT INTO TABLE LT_EDIT.
INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB TRANSPORTING
HANDLE_STYLE .
ENDIF.
ENDLOOP.
CALL METHOD G_GRID->REFRESH_TABLE_DISPLAY
EXCEPTIONS
FINISHED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMETHOD. "HANDLE_DATA_CHANGED</b>
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
*& Global Definitions
DATA: G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
*- Fieldcatalog for First and second Report
DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
X_FIELDCAT TYPE LVC_S_FCAT,
LS_VARI TYPE DISVARIANT.
* START-OF_SELECTION
START-OF-SELECTION.
SELECT VBELN
POSNR
FROM LIPS
UP TO 20 ROWS
INTO CORRESPONDING FIELDS OF TABLE ITAB.
END-OF-SELECTION.
IF NOT ITAB[] IS INITIAL.
CALL SCREEN 100.
ELSE.
MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
ENDIF.
*& Form CREATE_AND_INIT_ALV
* text
FORM CREATE_AND_INIT_ALV .
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
CREATE OBJECT G_CUSTOM_CONTAINER
EXPORTING CONTAINER_NAME = G_CONTAINER1.
CREATE OBJECT G_GRID
EXPORTING I_PARENT = G_CUSTOM_CONTAINER.
* Set a titlebar for the grid control
CLEAR GS_LAYOUT.
GS_LAYOUT-GRID_TITLE = TEXT-003.
<b>GS_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.</b>
GS_LAYOUT-ZEBRA = SPACE.
GS_LAYOUT-CWIDTH_OPT = 'X'.
GS_LAYOUT-NO_ROWMARK = 'X'.
GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
<b> CALL METHOD G_GRID->REGISTER_EDIT_EVENT
EXPORTING
I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.</b>
CREATE OBJECT G_HANDLER.
SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
<b> SET HANDLER G_HANDLER->HANDLE_DATA_CHANGED FOR G_GRID.</b>
DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
DATA: L_INDEX TYPE SY-TABIX.
"Here i am changing the color of line 1,5,10...
"so you can change the color of font conditionally
LOOP AT ITAB.
L_INDEX = SY-TABIX.
IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
LS_CELLCOLOR-FNAME = 'VBELN'.
LS_CELLCOLOR-COLOR-COL = '6'.
LS_CELLCOLOR-COLOR-INT = '0'.
LS_CELLCOLOR-COLOR-INV = '1'.
APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
LS_CELLCOLOR-FNAME = 'POSNR'.
LS_CELLCOLOR-COLOR-COL = '6'.
LS_CELLCOLOR-COLOR-INT = '0'.
LS_CELLCOLOR-COLOR-INV = '1'.
APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
ENDIF.
ENDLOOP.
* setting focus for created grid control
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
EXPORTING
CONTROL = G_GRID.
* Build fieldcat and set editable for date and reason code
* edit enabled. Assign a handle for the dropdown listbox.
PERFORM BUILD_FIELDCAT.
PERFORM SET_DRDN_TABLE.
* Optionally restrict generic functions to 'change only'.
* (The user shall not be able to add new lines).
PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
**Vaiant to save the layout
LS_VARI-REPORT = SY-REPID.
LS_VARI-HANDLE = SPACE.
LS_VARI-LOG_GROUP = SPACE.
LS_VARI-USERNAME = SPACE.
LS_VARI-VARIANT = SPACE.
LS_VARI-TEXT = SPACE.
LS_VARI-DEPENDVARS = SPACE.
CALL METHOD G_GRID->REGISTER_EDIT_EVENT
EXPORTING
I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.
**Calling the Method for ALV output
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
IS_VARIANT = LS_VARI
IS_LAYOUT = GS_LAYOUT
I_SAVE = 'A'
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT
IT_OUTTAB = ITAB[].
* Set editable cells to ready for input initially
CALL METHOD G_GRID->SET_READY_FOR_INPUT
EXPORTING
I_READY_FOR_INPUT = 1.
ENDFORM. "CREATE_AND_INIT_ALV
*& Form EXCLUDE_TB_FUNCTIONS
* text
* -->PT_EXCLUDE text
FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
* Only allow to change data not to create new entries (exclude
* generic functions).
DATA LS_EXCLUDE TYPE UI_FUNC.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
ENDFORM. " EXCLUDE_TB_FUNCTIONS
*& Form build_fieldcat
* Fieldcatalog
FORM BUILD_FIELDCAT .
DATA: L_POS TYPE I.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-NO_ZERO = 'X'.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-HOTSPOT = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Item'(025).
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
X_FIELDCAT-FIELDNAME = 'DROP'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-DRDN_HNDL = '1'.
X_FIELDCAT-DRDN_ALIAS = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Comissn'(025).
X_FIELDCAT-FIELDNAME = 'COMISN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-EDIT = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
ENDFORM. " build_fieldcat
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF G_CUSTOM_CONTAINER IS INITIAL.
**Initializing the grid and calling the fm to Display the O/P
PERFORM CREATE_AND_INIT_ALV.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form SET_DRDN_TABLE
* text
FORM SET_DRDN_TABLE.
DATA:LT_DRAL TYPE LVC_T_DRAL,
LS_DRAL TYPE LVC_S_DRAL.
LS_DRAL-HANDLE = '1'.
LS_DRAL-VALUE = 'S/W Engineer'.
LS_DRAL-INT_VALUE = 'S/W Engineer'.
APPEND LS_DRAL TO LT_DRAL.
LS_DRAL-HANDLE = '1'.
LS_DRAL-VALUE = 'Manager'.
LS_DRAL-INT_VALUE = 'Manager'.
APPEND LS_DRAL TO LT_DRAL.
**Setting the Drop down table for Reason Code
CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
EXPORTING
IT_DROP_DOWN_ALIAS = LT_DRAL.
ENDFORM. " set_drdn_table
Regards
vijay -
Can you no longer have a background color for the text box in the new version of hp photo creations
just updated to the new version of HP Photo Creations, used to be able to have a colored background for the text box - is that no longer possible in this new (not better) version????!!!!! Uuuuuuuuuugh
Hi Lainey.
Thanks for asking. We're working on bringing back that feature. In the meantime, here's another way to add text backgrounds: Add a placeable graphic and then click the Arrange button to send it to the back, behind the text.
That approach also gives you more interesting shapes. The new alignment guides make it a snap to align a graphic with a text box. In the example below (it may take a day for the image to show up here), I also used the new Premium Editing Features to change the color of the graphic.
P.S. — Applying a thick border to an empty text box (also using the Premium Editing Features) is another way to create a background shape. That has the advantage of letting you pick any color for the box. You'll also find several new text styles at the bottom of the new text menu.
Let us know if we can help further,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts -
How to set minimum size for the 'location' box in toolbars?
I reorganized my toolbars by merging the location and tabs bar. I have the location on the left hand side and the tabs *next* to it, like this:
[ (<)(>) [LOCATION] /tab\/tab\/tab\ ]
Unfortunately when the number of tabs increases, the location box becomes so small that I cannot even see the url of the site I'm in...
Is there a way to force a minimum width for the location box? I couldn't find a setting in about:config for it (I imagine that this would be a browser.urlbar setting)You rock! The combination of fixed width tabs with the stylish Add-on, and the single line of script below just made my day!
#main-window[sizemode="maximized"] #TabsToolbar, #TabsToolbar > #urlbar-container { min-width: 350px; }
Many thanks! -
I don't have a good good disc for the mac box set can i get it with it my serial no.
I don't have a good good disc for the mac box set can i get it with it my box number?
If this is a new box you just bought ad the disk is bad, Apple will replace it for you. OTOH, if you have lost the disk or it has become damaged over time, that is your responsibility, and though I don't speak for Apple, I'd be very surprised if you had any option other than buying another copy.
-
Hi Everyone,
Tooltip is not coming for the Combo Box in Forms 10g!! Is there any specific reason why is it not available??
With Regards,
YathishIts bug 1879328 I would think.
-
First 50 bills for the customers will get discount
Hi Experts,
I am creating a promotion in SAP POS like First 50 bills for the customers will get 20 percent discount for a particular date range and as the 51st bill created this promo should not apply
I am unable to create this promo. Is it possible to create this promotion in SAP POS (SAP Triversity) and if yes then what would be the procedure to create this promo in SAP POS (SAP Triversity) ?
Prompt response will be highly appriciated.Hi Vikas,
You can check in Promotion Criteria, if such provision exists,
But I suppose 2 option exists:
a. Promotional prices for a single PLU
b. Promotional prices for a group of PLUs
Defining of range also talks about defining a range (high-low ) within which the price of the items must fall to be eligible for the promotion
You can tweak on some other things, Pricing Method section,Pricing Target Type field or others to see this scenario of your's is possible or not in SAP POS.
Hope it helps.
Regards,
Anirban Roy -
Every Shipping point has corresponding number range for the HU box number?
Hi,
Every Shipping point has corresponding number range for the HU box number assignment?
For example, we are doing packing, then a Handling Unit number has been generated. So where to define this number range of the HU number??
Is it from the SPRO or controled by programs.
Thanks.Hi,
Please find good stuff on Handling Units Below:
HANDLING UNITS CONFIGURATION:
A Step by Step Guide to the SAP Handling Unit Management Configurations
The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually.
This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
Table of Contents
Objective
IMG Menu The Starting Point
Handling Unit Management Overview
Start of HUM Outbound Deliveries Manual Packing Configuration
Define Number Ranges for Handling Units
Define Packaging Material Types
Define Material Group for Packaging Materials
Define Allowed Packaging Materials
Use Handling Unit Supplements
Maintain Goods Movements for Handling Unit Stock-Posting
Define User Status Profile
Set QM Check and Delivery Type for Each Movement Type
HU Requirement for Storage Locations and Default Values for Deliveries
Packing Control By Item Category
Define Requirements for Packing in the Delivery
Delivery Type Determination
Set Unique Number Assignment for HU Identification
Number Range Maintenance for HU Identification
Define Number Assignment for Each Packaging Material Type
Delivery Output type for Packing List
Maintain the Delivery Output Determination Procedure
What else to maintain after the Manual Handling Units Configurations?
Start of the Automatic Packaging Configuration
Define Number Ranges for Packing Instructions
Define Determination Type for Packing Instructions
Define Number Ranges for Packing Instruction Determination Records
What else to maintain after the necessary Automatic Packaging Configurations?
Appendix A: How to do Manual Packing for Non-Assigned Handlings Units?
Appendix B: Scenario 1 How to do Manual Packing by Delivery Item?
Appendix C: Scenario 2 How to Manual Pack the Materials into Pallets?
Appendix D: How to do Automatic Packing?
Appendix E: How to do Goods Movement for Handling Unit Material?
Appendix F: How to Unpack the Handling Unit Material?
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
Figure 1: Handling unit example
Structure
The handling unit object contains the following attributes:
Identification number
Dimensions
Weight
Volume
Status
Materials and quantities
Packaging materials
Packing instructions
A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
Handling unit header
The header data of a handling unit is divided in the following way:
Weight/Volume/Dimensions
General data
Means-of-transport data
Additional data
Output determination procedure
For more information about each of these detailed points, see Editing detailed data for handling units.
Status
The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
Handling unit item
The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
Integration
Handling units can be used in all processes within the supply chain.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
How to create an alternative bom for the same product
Hi expert,
I want to know how to create an alternative bom for the same product. Can i use the different bom usage to create or use the same bom usage? In addition, how can i use the production version to link the alternative bom for the same product?
Please help me solve the problem.
Thanks in advance for any assistance.
George shiHI
you can go with t-code CS01
if you have the BOM already and you want to create the alternative BOM then just goto create BOM
and enter the material and plant and uasge system will auto matically prapose the next numner ie, if you have Alt BOM1
then next system will prappose 2.
then you can enter the components as per you requirement
if you go to different BOM usage then sytem will not go for alternative BOM it gives again alt bom 1.
prodcution version you need to craet from mateial master
each version you can go woith alternative BOMS
Version 1 will have alt BOM1
Version 2 can haev ALT BOM2
-ashok -
How much RAM needed for the DB box
Hi,
Can someone share with me the technical way to do calculation of how much of RAM needed for a new Linux box with estimation of 500 users. I hope this calculation can also allow me to breakdown how much MEMORY needed for each session.
Please recommend any site that I can refer to if any. TQ.My project start with Oracle 9i R2 (9206) on Linux (not yet confirm on the platform and etc). Just assume I will use Linux Red Hat Adv Sever latest version.
Hence how many GB of memory for the box is sufficient to handle 500 connections. Pls guide me the formula to derive the calculation. TQ -
Is there an alternative replacement for the JConsole?
When I use the JConsole to look at certain JMX values then
it occurs often that entry fields and info texts are very short and uncomfortable.
Is there an alternative replacement for JConsole?
PeterJoachimSauer wrote:
[J]VisualVM has a useful MBean view as well.I really like that one. I have also used MX4J as JMX client a couple of years ago. It was good at that time, don't know how it is now.
Kaj -
What is best way of configuring the channels for the PXI box
Hi,
All these days I was using a SC-2345 box and a PCMCIA card and I created all my virtual channels as traditional NI-DAQ channels. Now I am using the PXI box, I am wondering whether I still use same traditional NI-DAQ channels or shall I use NI-DAQmx channels. I would like to know what are the advantages of using the NI-DAQmx channels and also using the DAQmx VI's in the labview programming.
Thanks,
Mudda.Hi Mudda,
I think it depends on what PXI measurement modules you are using. I'm using PXI4461 for audio measurement and the card supports DAQmx only. I also have PXI5112 digitizer card and it uses the NI-Scope driver. So you need to check which driver your module supports.
You can find advantage of DAQmx here. http://zone.ni.com/devzone/conceptd.nsf/webmain/B1C2A3BC3228AEA186256D2500640D52?opendocument
Bill -
Charging for the first time, charging for the first time
I bought my first macbook pro today and was wondering how to charge it for the first time. I've drained out the battery it had from the beginning theres only 3% left
I hear you - Now call them back and tell them to read their own suggestions before answering customer's questions without stopping to think if they're giving you the right suggestions - answers.
And direct those so called geniuses to Apple's website - regarding what you read below.
Portables with built-in batteries
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
MacBook
MacBook (13-inch, Late 2009) and later
MacBook Air
MacBook Air, all versions
MacBook Pro
MacBook Pro (13-inch, Mid 2009) and later
MacBook Pro (15-inch, Mid 2009) and later
MacBook Pro (Retina, Mid 2012)
MacBook Pro (17-inch, Early 2009) and later -
Nano replacement - do I need to sign for the return box? or will they leave in mail box?
I seem to remember reference to signing for the delivery of the return box? Unfortunately, I didn't remember I'm out of town next week until I verified my address, and I don't see a way to go in and change it.
Have you guys had to sign for it, or will they leave it in the mail box? Sounds like most people are just getting a padded envelope now, so I'm hoping they will leave it!Contact Apple support.
Contacting Apple for support and service
Make sure you give them your case number.
You can also call1-800-MY-APPLE -
How do I connect my apple tv to my tv when the HDMI is being used for the freeview box?
I have an apple tv that I want to set up to my tv. Currently the HDMI on my tv is connected to the HDMI on the freeview box we have. How do I connect all three?
Melaniejf
You can buy an HDMI splitter or switcher to take two (or more) inputs into one port. Just put a search into your search engine and they will come up or visit your local electronic shop.
Jules
Maybe you are looking for
-
Which is better UDF or STUFF function ?
Hi, We have a requirement like to retrieve a concatenated string of values as a column. For this whether i should use UDF with SQL query or STUFF. Please suggest. Here is my Example --Create function CREATE FUNCTION dbo.GroupsList(@AgentID NVARCHAR(3
-
Problem with sync-cds after installing Patch 115614-26
Hi, We are in the process of patching the machines in the cluster from 5.2 p2 to p4 on Solaris 9. After installing 115614-26 (System Directory Server 5.2 patch 4) the process is to start up slapd and run sync-cds to synchronise the updates. We're see
-
I would like to cancel my icloud. I am within the 15days trial
I recently bought icloud storage on my iPhone but I realize that I do not really need it so I would like my money back. I am within the 15 day trial period. I really appreciate trying it out. Thank you for your time and help. lg2
-
Hello Folks, I'm going to install UCCX 8.0 in a test lab and I'm wondering what hardware other are using? I'm presuming that it needs ESXi4.0? Do you have to use the full production specification of 2 x vCPU and 4GB RAM? Or can you cut down the res
-
Integrated configuration with parameterized mapping
Dear All, My scenario is using integrated configuration AAE. I am trying parameterized mapping with Integrated configuratiion but it throws an error saying that AAE doesnt support parameterized mapping. I am uisng PI 7.1 I wanted to know doest PI 7.3