First bar of bass not recording

Ok so yet another GB10 issue - the first bar of my Midi bass doesn't record. Seems to show up in gb10 after I record it but only the last 3/4 bars play-back and the first note/bar simply does not play.
Secondly.....I can't seem to loop-record (multiple-takes). I have repeat set up for 4 bars, and when it loops back to bar 1 during record mode, it PLAYS back the initial recording and causes me to record OVER that and create's DOUBLE the bass. Seriously...I really hate GB10...it's just awful so far.
Curious if others are having this problem.

Seems to show up in gb10 after I record it but only the last 3/4 bars play-back and the first note/bar simply does not play.
Is the first bar part of the count in?
Are the notes of the first bar in a register, that the selected bass patch can play? Which bass are you using and which register are you playing, C0 to c1 or higher?

Similar Messages

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
i have been provided with this info
You can find troubleshooting tips, how-to articles, and moderated
> > discussion forums on our support website:
> >
> > www.apple.com/support
> >
> > iPhone: Basic troubleshooting
> > http://support.apple.com/kb/HT1737
> >
I did every step in the link that i have been provided with (thank you), but I’m
still experiencing the same issue. My experience with Apple has been
excellent and this has been the first time I have experienced something
like this with an Apple product. I hope we can find a quick solution.
In order to get the iPhone 5 as soon as it launched (being a major fan of
Apple products!), I purchased my iPhone 5 from the UK through a friend of
mine who lives there.
My question is: can I have the faulty device replaced within Saudi by one
of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
avoid the disruption, complication and expense of sending it back to the
UK.
Could you advise whether this is possible or not, and if not how should I
go about having the device replaced?
Thank you in advance for your cooperation.

Nice try! Take a hike.

I'm having trouble recording a bass to go along with a recording I dropped into GB. I'm using an interface and I can hear the bass line, I've clicked on the 'record' button, but the sound does not record. What am I missing?

I have the bass connected to my imac with an interface.
I can hear the bass and I've clicked on the 'record' button, but the sound does not record.
Am I missing something ?
Please advise.
Mike

Double check all your audio settings.
System Preferences --> Sound --> Input should be set to your audio interface.
GB --> Preferences --> Audio/MIDI --> Input should be set to your audio interface.
With your track selected, open the Track Info pane, and select the Edit tab. Under input make sure that Mono 1 or 2 is selected (which number will depend on which input you plugged your bass cable into).

My Webcam is not recording correctly. When recording directly to youtube, the audio sounds like a robot. It was not doing that when I first got my new MacBook Air last month. What do I do to fix it?

My built-in Webcam is not recording correctly. When recording directly to youtube (upload), the audio sounds like a robot. It was not doing that when I first got my new MacBook Air last month. What do I do to fix it?
I have tested it over several days with different internet connections...and have done it with another notebook computer on the same connection and it the video uploaded and recorded fine. I can also use the video webcam with Google Hangouts and it records and works fine. So I know the problem is not internet connection...and apparantly not even the webcam or mic.

Try using Settings > General > Reset > Reset All Settings.

Creative Cloud installs and appears in my menu bar, but will not truly "open".

I'm on OSX 10.9.3 . Creative Cloud downloads, installs, and appears in my menu bar, but will not truly "open". I only see the spinning symbol (the Adobe one, not the Apple beach ball). I never even get a chance to log in and download anything. I've tried on three different Macs with the same result. All three meet the system requirements for CC. Thanks in advance for any assistance!

Sorry, it didn't work for me. I closed the application (it hung the first time I tried and I had to restart the Mac to get rid of the window), and deleted the recommended file. When I tried to re-open the app, I got this:
I never got the opportunity to log in, either before or after the attempted fix.
Thanks,
A

HT1222 Having problem with Notes at time will not record dictation on iPhone?

Having problem with Notes at time will not record dictation on iPhone?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help have your phone examined by an apple technician. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Programmes not recording

I have already checked and no FAQ answers are applicable. The program showed as set to record on EPG, but was not available (ie not showing at all) to start watching from the recorded list after the program had started. When selecting the program to watch from EPG, it suddenly started to record (part way through). This is not the first time that for no reason a program has not recorded. It was on series record, good signal, no power interruptions, no turning of machine etc. the box was supplied new by BT within last six months and is up to date with latest software. The box is set to over write old programmes when the drive is full.
Are these boxes just unreliable or is their a fix for this problem?
Incase it is relevant, it happened with 2 programmes at the same time (1) Silent Witness, BBC1 21.00 tonight (12/01/15) and (2) Broadchurch on ITV at the same time. Heathfield transmitter.
Thanks

I'm having problems with advaced recording,when its only recording for 1 minute before its turning its self off. Is anyone else having the same problem? Anyone got an answer?

Scroll bar on editor not working

I recently upgraded to phtoshop elments 11.0 to 13.0
In the editor mode I cannot use the scroll bar. The scroll bar works fine in the orgnizaer mode. I have tried three different mouses and there is no difference.
Tom Fitch, San Antonio Texas

I am using Windows 7 Professional
In the organizer portion the scroll bar moves. When I put my mouse or
arrow on the scroll bar and drag it then of course I move through the different
rows of folders or rows of pictures once in the photo bin.
It was doing it with Photoshop Elements 11.0 and I thought 13.0 might fix
the problem and the scroll bar did move on the first try but not since then.
When I try and load the photo bin and I am choosing the right folder to
load the scroll bar just does not move. I can select the right folder by
using my up and down arrow or the page up and down and then click on the right
folder and then it loads.
Once I get the right folder of pictures loaded and once I finish the first
row of pictures I cannot use my mouse and arrow to drag the scroll bar
down to get to the next row of pictures. I can place my arrow on my mouse
below the scroll bar and got to the next row but I usually get only half the
picture and sometimes only 1/4 of it but I can usually get it loaded up and
edit the pictures and move on the next picture but it is very slow and
frustrating.
Any help would be appreciated.
I protested to an adobe supervisor and I got an e-mail and somebody is
supposed to call me tomorrow so hopefully then can log on to my computer and
see what I am talking about.
Sound like something got corruped in the editor mode only. I tried 3
different mouses and even the computer mouse and no difference.
Tom Fitch
In a message dated 12/17/2014 5:05:37 P.M. Central Standard Time,
[email protected] writes:
scroll bar on editor not working
created by RKelly_ (https://forums.adobe.com/people/R_Kelly) in
Photoshop Elements - View the full discussion
(https://forums.adobe.com/message/7024909#7024909)

JComboBox scroll bar thumb does not move

I have an application that is using a third-party panel class that extends JPanel. For some reason my JComboBox scroll bar thumbs do not move unless the pop-up menu viewport extends outside the frame boundary. Does anyone have any idea what might be causing this or have any suggestions on how I might trouble shoot the problem? I would appreciate any feedback, thanks.

Arrgh, I first reported this behavior (well, alright, I was using a table control/indicator, not the MCL) back in LabVIEW 8.0. The discussion thread can be found on the LAVA forums, starting September 14, 2006. In that discussion, Scott Menjoulet and jhoskins seemed to be able to work around it with the "custom control in a project fix", but I could never get that to work, at least not when I built the custom table into an executable. I filed a bug report on the next beta cycle, but I can't find my old bug reports/CARs online anymore.
But I'm reasonably certain it's been an identified bug since 8.5.
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer

Error code could not record disc

HELP!!!I've attempted to burn a dvd several times using iMovie to capture video and iDvd to burn it. It takes 5-6 hours to burn then i get a window that says OS stopped responding. If attempt to burn the capture using roxio titanium toast 6 it takes several hours to attempt to burn then i get a message that says "could not record disc becuase of Mac OS error result code= -39. Does anyone have any idea what this means? and i am using a 3rd party DVD burner that's hooked up to the USB port.
power Mac G4 Mac OS X (10.4.6)

Hello Valleyphoto,
First of all, welcome to the Apple discussions.
Here is a link that gives you the Apple error codes.
Apple error codes
Good luck ...
Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
Dimaxum <]:~))

First operand of . is not an object, so cannot access member WriteLine

1) I get error like
First operand of . is not an object, so cannot access member WriteLine. (180,235) Z_REM_STRING.Z_FUNCLIB_FORMULA.FieldFormula Name:RemoveSpace PCPC:691 Statement:11
2) I have the record called Z_REM_STRING and have one field call FUNCLIB_FORMULA.FieldFormula
3) the function inside the FieldFormula is
Function RemoveSpace(&inputString As string) Returns string;
some log
Return &temp;
End-Function;
the code inside the function is work fine inside the AE
what mistake that I made?

Hi
The part where you have "some log" you have not declared the file.
Try something like:
Local File &myFileVar = GetFile("C:\temp\myLogFile.log","W",%Filepath_Absolute);
where &myFileVar is the file variable you use for the writeline.
Kind regards
André

Cisco AQM 8.5 not recording : wav files are deleted from client side

Daer Networkers,
We do have Cisco AQM 8.5 SR2 ES1 installed with UCCX 8.5
The issue is that when accessing the Web interface of AQM and try to look for calls, I can't find any one.
When checking the client side, I can see that the call are being recorded : The FROM and TO files are there. But once the call is terminated, the wav file appear for some seconds and then it dissappears asi fi it's deleted.
The wav files are not in the server too;
I don't know what is the issue. Can you please help ?
Thanks in advance.

Hi,
This issue was resolved by doing a repair to the QM Base services, then run postinstall as if it was run for the first once.
The Proxy Gateway program was missing for some reason. After doing the repair the issue was resovled and calls are uploaded to the server.
Now I am facing another issue ! : I can hear the client voice only. Agent's voice couln't be heard in the recorded files. As if the agent's voice is not recorded. Can you please advise ?

How do I delete items from menu bar that are not part of the OS

How do I delete items from menu bar that are not part of the OS

Perhaps you could be more specific, as it is a little difficult to answer your question without any details. I can give you some general ideas though.
On my machine there are a few applications that have installed items into the menu bar - I'm assuming you are talking about the icons on the right hand side of the top bar. To remove those items, I would generally need to uninstall the program that created them. To do this varies a little from application to application.
Also, sometimes an application will have preferences that allow you choose if you want to display the item in the menu bar.
So, my general advice would be that you need to identify the application that placed the item there, and remove it from your computer. If there is an uninstall program for that application, I would run that in the first instance.
If you don't actually wish to uninstall the application, you may need to click on the item or run the application and see if there is a setting to not show the menu bar item.
Hope that helps.
Ivan

M Audio Fast Track not recording in stereo

I purchased an M Audio Fast Track to use with Garageband. I'm running OS 10.7.2 Lion. The M Audio website says its compatible with Lion. Both my vocals and guitar, bass only record in mono even though I've got the audio input set to stereo. I set the input in GB Preferences for the M Audio DAW. The Garageband software instruments record in stereo but they're not going through the DAW. Am I doing something wrong? BTW, I'm a beginner so...and help will be appreciated.

pkelley61 wrote:
Both my vocals and guitar, bass only [play out of one speaker] even though I've got the audio input set to stereo.
http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)

When I try to make a sound recording Quickplayer does not record?

I tried to record my voice on Quickplayer however it does not record it. I looked at system preferences but did not notice any changes. However now it won't record my voice on audio recording.

Launch QuickTime Player.
From the menu bar top of your screen click File > New Audio Recording
Then tap the gray button with a red circle in the middle to start recording.

First bar of bass not recording

Similar Messages

Maybe you are looking for