First form Spam

Congratulations to me...my first spam from a form!
Anyway, submission result below, is this typical or does it
look like
someone is just trying to be funny? And should I bother to
reject the ip
address for future submission?
Second, would it work to simple create an image with text on
it that a
submitter would need to type into a validation required
field, ot do I need
to get a captcha program?
Visitor's IP: 213.163.65.163
name: twlquf
company: CcZzfwCuDl
phone: xxx-xxx-xxxx
email: [email protected]
url:
http://iniwspjtyvow.com/
comments: Z7n4aT <a href=\\\"
http://yvnfnclmrgcq.com/\\\">yvnfnclmrgcq</a>,
[url=http://hfiruvyygzee.com/]hfiruvyygzee[/url],
[link=http://cwmcmspubdvb.com/]cwmcmspubdvb[/link],
http://wvyqmkocszfi.com/

Thanks so much, so this is what the total script looks like,
and I have
changed the from label from address2 to address. Does this
look good?
include("thankyou.php");
// Receiving variables
@$pfw_ip= $_SERVER['REMOTE_ADDR'];
@$name = addslashes($_POST['name']);
@$company = addslashes($_POST['company']);
@$phone = addslashes($_POST['phone']);
@$email = addslashes($_POST['email']);
@$url = addslashes($_POST['url']);
@$comments = addslashes($_POST['comments']);
// Validation
if (strlen($phone) <8)
die("<p align='center'><font face='Arial' size='3'
color='#FF0000'>Please
enter a valid phone</font></p>");
if (strlen($phone) >15)
die("<p align='center'><font face='Arial' size='3'
color='#FF0000'>Please
enter a valid phone</font></p>");
if (! ereg('[A-Za-z0-9_-]+\@[A-Za-z0-9_-]+\.[A-Za-z0-9_-]+',
$email))
die("<p align='center'><font face='Arial' size='3'
color='#FF0000'>Please
enter a valid email</font></p>");
// checks if bot
if ($_POST['address'] != '' ){
die("Changed field");
//Sending Email to form owner
$pfw_header = "From: $email\n"
. "Reply-To: $email\n";
$pfw_subject = "Submission from website";
$pfw_email_to = "leftoutforpostreason";
$pfw_message = "Visitor's IP: $pfw_ip\n"
. "name: $name\n"
. "company: $company\n"
. "phone: $phone\n"
. "email: $email\n"
. "url: $url\n"
. "comments: $comments\n"
. "This message was sent by the trial version of PHP-Form
Wizard, To Get the
full version please use this link:
http://tools4php.com/form-wizard/order.html";
@mail($pfw_email_to, $pfw_subject ,$pfw_message ,$pfw_header
"eclipsme" <[email protected]> wrote in message
news:[email protected]...
> GPaul wrote:
>> Thank you to everyone for helping, and sorry for the
delay, I ran into
>> some other issues that needed attention.
>>
>> So I have changed it to the #important DIV, and it
does not appear to
>> show up (only checked one computer), and I like the
idea of just letting
>> it die if the form field is filled out, as listed
below. Where does that
>> script end? Is this how the script should be?
>>
>> // checks if bot
>>
>> if ($_POST['address2'] != '' ){
>>
>> // The hidden fields have been changed
>> // Do something
>> die("Changed field");
>>
>> } else {
>>
>> }
>>
>> And leave out the
>>
>> // Do more error checking?
>> // Send the email
>> // Do the rest of your script
>> // Don't forget the final brace
>>
>>
>>
>> Thanks again for all the suggestions.
>>
>> Gary
>>
> Any line in PHP that begins // is a comment and have no
effect on the
> script itself. You could also leave out this:
>
> else {
> }
>
> Harvey

Similar Messages

  • Do Flash Forms kill form spam?

    This may be a real newby question. Is it possible to stop
    100% of form spam by using a hidden field in a Flash form, and then
    simply testing for is presence on the page the form posts to? Is it
    really this easy?

    Flash forms have a lot of disadvantages compared to html form
    for both the user and the developer. If spam is your concern, look
    up a concept called captcha.

  • The simplest of form spam traps

    I feel as if I am just one step away from solving my form spam problem. I want to institute the simplest of traps in my form.cgi file, whereby I check a hidden field for any content or I check a field for specific content ("what is 5 x 5"). I just don't know how to code that. Anyone with an idea?

    CGI files are normally written in Perl. Without seing your form code, nobody is likely to be able to help you. And if it is written in Perl, you'll need to find a Perl expert. I don't know anyone in this forum who uses Perl.

  • Web form spam continued . . .

    HI, I have tried adding a hidden field to my web form to help reduce spam. I am not sure what I tried will work and do I need to and how do I add some code to specify do not process form if this field is filled in?
    Here is what I tried so far and any help would be awesome - Thanks Jim
    <!--- rest of form above--->
    <div style="display:none; visibility:hidden;">
         <label for="contact_email">Please leave this field blank:</label>
         <cfinput type="text" name="contact_email">
    </div>
    <div class="register">             
                <cfinput type="submit" name="submit" value="Register">
                <cfinput type="reset" name="Reset " value="Reset Form">         
    </div>
                   </fieldset>
    </cfform>

    I cannot see how anything you've said or done so far will help reduce web-form spam. Assuming you wish to prevent someone from maliciously submitting a form 10000 times to your site, then you have to use a CAPTCHA.
    There is no easy, 1-2-3 way to add CAPTCHA to your application. However, some ways are easier than others. I would recommend Raymond Camden's Quick and dirty CAPTCHA Guide - for ColdFusion 8. It uses Coldfusion 8's in-built CAPTCHA functionality, and is relatively easy to adopt.

  • I have bought macbook air first form other owner from few month,but after i try reinstall back lion os x..its cant reinstall back already..i try ask the owner he keep saying you need send repair..so i decide ask at here before i send to any service..

    i have bought macbook air first form other owner from few month,but after i try reinstall back lion os x..its cant reinstall back already..i try ask the owner he keep saying you need send repair..so i decide ask at here before i send to any service..

    StoneComputers wrote:
    What about the incredable lag time from clicking on a program to the time it opens (or the time till the loading screen starts)? I wish I could record it and play it so I could see if thats normal from other members... the icon just sitting there for over 35 second (I just counted 36 till the loading screen popped up) at first I thought it was me not clicking hard enought cuz the mouse button I have is real stiff (any ideas on that?) but no it takes that long just to get to the app loading screen... this happens every time same amount of time with the 3 programs I use the most, prolly more but I know for a fact world of warcraft, uTorrent, and Google Chrome. I would just chalk it up to slow hardware but they load real quick in windows 7 and once this bad spot is loaded the program runs so fast and nice afterword. Maybe some tweeks? I wonder if this would happen in Snow?
    The coment "few outdated programs" Ive seen alot its not just a few its a lot and since games are not Apple's strong point I would think they would want to keep as many as they could...
    An example of the rants you will see from a lot here. Don't be put off as these problems are generally user specific, and these same old comments come out after the release of every OSX I can remember. When Lion is upgraded  to the next OSX you can gaurentee these forums will be full of people screaming about how great Lion was. Happened with Tiger, Leopard and Snow Leopard.
    So come to think of it you may be better off Googling sites that give you unbiased views on Lion, rather than expect any positive comments here. For every one complaint there are probably 100,000 people with no issues.
    Cheers

  • How to keep first form window state maximize when you called the second for

    HI,
    how to keep first form window state maximize when you called the second form ?
    Thanks

    Here is sample of doing this.
    Chris

  • My very first form

    For my very first form I want to create one where a visitor
    can submit an email address. I've been on the net learning as much
    as I can but I'd like to verify I'm understanding what I'm reading.
    I want to verify for a valid email address. It looks like
    there are a number of scripts that will do that. I'm studying the
    scripts that are available to see if I can understand them. Then I
    want the form sent via email. I've read that the new browsers don't
    support mailto so I went to my host (GoDaddy) and they seem to have
    a couple handlers. The cgi email handler I assume is the one I
    want. All they ask for is an email address set up on the account.
    How does the form get sent to the email handler?
    And can someone help me understand what this example is
    doing? Found it while doing research.
    function emailinput_on()
    if(document.getElementById("email-addr").value=="Your email
    address")
    document.getElementById("email-addr").value = "";
    function emailinput_off()
    if(document.getElementById("email-addr").value=="")
    document.getElementById("email-addr").value = "Your email
    address";
    function validate_email()
    var alertbg = "#345f91";
    var okbg = "#ffffff";
    var email_regex =
    /^\w+([\.-]?\w+)*@\w+([\.-]?\w+)*(\.\w{2,})+$/;
    if(!email_regex.test(document.getElementById("email-addr").value))
    document.getElementById("email-addr").style.background =
    alertbg;
    document.getElementById("email-addr").focus();
    return false;
    else
    document.getElementById("email-addr").style.background =
    okbg;
    return true;
    It goes with this form:
    <form id="email-signup" action="email-thankyou.htm"
    method="post" onSubmit="return validate_email()">
    <p>
    <input id="email-addr" name="email-addr" value="Your
    email address" onFocus="emailinput_on()"
    onBlur="emailinput_off()">
    <input id="sbmt-image" name="sbmt-image" type="image"
    src="images/go_light_bg.gif" alt="Go">
    </p>
    </form>
    Tom

    There are only two ways to process form data -
    1. Use mailto:[email protected] as the action of the form
    2. Use a server-side scripting method to a) harvest the
    form's data, b)
    process it in some manner, e.g., enter it into a database, c)
    formulate and
    send an email to one or more email recipients, and d)
    redirect the visitor
    to some ending page
    Method 1 is quite simple, and is also the least reliable. It
    depends both
    on your visitor having an email client already installed on
    their computer -
    this eliminates public computers, or home users without email
    clients
    installed (more and more it seems) - and on the installed
    email client
    responding to
    the mailto call. It is not possible to use this method *and*
    send the
    visitor to a
    thank you page as well.
    Method 2 is the preferred method, since it eliminates the
    problems of method
    1, but it means that you have to grapple with
    server-scripting somehow (ASP,
    CF, PHP, perl, etc.).
    You would have to decide which of these methods is best for
    your needs,
    but if it's Method 2, then start by asking your host what
    they provide for
    form
    processing.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "TCarp" <[email protected]> wrote in message
    news:[email protected]...
    > For my very first form I want to create one where a
    visitor can submit an
    > email
    > address. I've been on the net learning as much as I can
    but I'd like to
    > verify
    > I'm understanding what I'm reading.
    >
    > I want to verify for a valid email address. It looks
    like there are a
    > number
    > of scripts that will do that. I'm studying the scripts
    that are available
    > to
    > see if I can understand them. Then I want the form sent
    via email. I've
    > read
    > that the new browsers don't support mailto so I went to
    my host (GoDaddy)
    > and
    > they seem to have a couple handlers. The cgi email
    handler I assume is
    > the one
    > I want. All they ask for is an email address set up on
    the account.
    >
    > How does the form get sent to the email handler?
    >
    > Tom
    >

  • Php contact form spam

    I published a website two weeks ago and in the first week the contact form started getting hit with spam.  Here is an example of one of many similiar, note the email address is always different but yet a gmail acct:
    Name: クãƒã‚¨ 財布 公式
    Phone Number: クãƒã‚¨ 財布 公式
    Email Address: [email protected]
    Message: <a href="http://gagastore.meningitisfacts.com/">ガがミラノ 時計 人気</a>初直営店がいよいよOPEN! http://gagastore.meningitisfacts.com/
    Today, I have set up filters on the email (GoDaddy) blocking anything with a "http://" and the "ガがミラノ 時計 人æ°" markings.
    I am trying ever which way not to use Captcha because it is such a pain.  I did read up on the timer where if it is filled out in less then 5 seconds to discard. I did place a hidden field last week and to date that has made zero difference.
    My question is - Is there a good latest and greatest code that I can update to my form to combat against these JERKS?
    BTW - so far it appears they only start hitting the site's contact form from Friday til Saturday.  Makes me wonder if it is a human rather than a bot.

    jlkappler wrote:
    I published a website two weeks ago and in the first week the contact form started getting hit with spam.  Here is an example of one of many similiar, note the email address is always different but yet a gmail acct:
    Name: クãƒã‚¨ 財布 公式
    Phone Number: クãƒã‚¨ 財布 公式
    Email Address: [email protected]
    Message: <a href="http://gagastore.meningitisfacts.com/">ガがミラノ 時計 人気</a>初直営店がいよいよOPEN! http://gagastore.meningitisfacts.com/
    Today, I have set up filters on the email (GoDaddy) blocking anything with a "http://" and the "ガがミラノ 時計 人æ°" markings.
    I am trying ever which way not to use Captcha because it is such a pain.  I did read up on the timer where if it is filled out in less then 5 seconds to discard. I did place a hidden field last week and to date that has made zero difference.
    My question is - Is there a good latest and greatest code that I can update to my form to combat against these JERKS?
    BTW - so far it appears they only start hitting the site's contact form from Friday til Saturday.  Makes me wonder if it is a human rather than a bot.
    One way to test if it is human or bot is to return the contents of the 'honeypot' field in the mail too . (Once you establish if its human or a bot you can do something about it or not as the case may be). To me it looks like a bot and the honeypot field will contain information as well.

  • Only display first form URL in formsweb.cfg . mutiple URL does not work

    Hi Friends,
    I have 4 form application with 4 URL.
    app. server as 10g in window 2003.
    URL like as:
    http://salerpt.com/forms/frmservlet?config=emis-srmenu
    fmx file Location as C:\OraMid\forms\salerpt-Forms fmx name as srmenu.fmx in same directory
    fmb file location as C:\OraMid\forms\salerpt-Forms_source fmx name as srmenu.fmb in same directory
    # Single Sign-On OID configuration parameter
    oracle_home=C:\OraMid
    in formweb.cfg file
    baseHTMLjinitiator=basejini.htm
    workingDirector : workingDirectory= blank. but C:\OraMid\forms\salerpt-Forms right now
    # Forms runtime argument: which form module to run
    ##form=test.fmx
    ## i moved bottom section of form section in here and before
    ##line as Forms runtime argument: database connection details
    comment two line
    #jinit_exename=jinit.exe
    #jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
    I create 4 sections as
    form=srmenu.fmx
    width=1200
    height=700
    pageTitle=Sale Information System (SIS)
    form=regsale.fmx
    form=salefinincial.fmx
    form=rptinfo.fmx
    However it only display first srmenu form interface that i put in( 4 different URL. only display first URL)
    It seems that one formsweb.cfg, it doesn not support multip form setting application.
    I have 4 small forms application with 4 URL for one formsweb.cfg.
    What should I need to do? I think that i miss some set up in configuration.
    I am waiting for your help!
    JIm

    Hi Bgrant,
    Please review my formsweb,cfg.
    Thanks
    I am looking for your help.
    # $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
    # formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
    # This section defines the Default settings. Any of them may be overridden in the
    # following Named Configuration sections. If they are not overridden, then the
    # values here will be used.
    # The default settings comprise two types of parameters: System parameters,
    # which cannot be overridden in the URL, and User Parameters, which can.
    # Parameters which are not marked as System parameters are User parameters.
    # SYSTEM PARAMETERS
    # These have fixed names and give information required by the Forms
    # Servlet in order to function. They cannot be specified in the URL query
    # string. But they can be overridden in a named configuration (see below).
    # Some parameters specify file names: if the full path is not given,
    # they are assumed to be in the same directory as this file. If a path
    # is given, then it should be a physical path, not a URL.
    # USER PARAMETERS
    # These match variables (e.g. %form%) in the baseHTML file. Their values
    # may be overridden by specifying them in the URL query string
    # (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
    # or by overriding them in a specific, named configuration (see below)
    [default]
    # System parameter: default base HTML file
    baseHTML=base.htm
    # System parameter: base HTML file for use with JInitiator client
    baseHTMLjinitiator=basejini.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: working directory for Forms runtime processes
    # WorkingDirectory defaults to <oracle_home>/forms if unset.
    workingDirectory= C:\OraMid\forms\sales-Forms
    # System parameter: file setting environment variables for the Forms runtime processes
    envFile=default.env
    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    escapeparams=true
    # Forms runtime argument: which form module to run
    #form=test.fmx
    [[srmenu]]
    form=srmenu.fmx
    width=1200
    height=700
    pageTitle=Sale Management Information System
    [[regsale]]
    form=regsale.fmx
    width=1200
    height=1500
    pageTitle=Sale Management Information System
    [[salefinincial]
    form=salefinincial.fmx
    width=1200
    height=1300
    pageTitle=Sale Management Information System
    [[rtpinfo]]
    form=rptinfo.fmx
    width=1200
    height=1000
    pageTitle=Sale Management Information System
    # Forms runtime argument: database connection details
    userid=scott/tigerd@oracleapp
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
    # Sub argument for otherparams
    buffer=no
    # Sub argument for otherparams
    debug_messages=no
    # Sub argument for otherparams
    array=no
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    query_only=no
    # Sub argument for otherparams
    quiet=yes
    # Sub argument for otherparams
    render=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=
    # HTML page title
    pageTitle=Oracle Application Server Forms Services
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    HTMLbeforeForm=
    # HTML to add after the form
    HTMLafterForm=
    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms/lservlet
    # Forms applet parameter
    codebase=/forms/java
    # Forms applet parameter
    imageBase=DocumentBase
    # Forms applet parameter
    #width=750
    width=1024
    # Forms applet parameter
    #height=600
    height=768
    # Forms applet parameter
    separateFrame=false
    # Forms applet parameter
    splashScreen=
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=teal
    # Forms applet parameter
    logo=
    # Forms applet parameter
    restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for JInitiator
    archive_jini=frmall_jinit.jar
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
    archive=frmall.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=0
    # Page displayed to Netscape users to allow them to download Oracle JInitiator.
    # Oracle JInitiator is used with Windows clients.
    # If you create your own page, you should set this parameter to point to it.
    jinit_download_page=/forms/jinitiator/us/jinit_download.htm
    # Parameter related to the version of JInitiator
    jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
    # Parameter related to the version of JInitiator
    #jinit_exename=jinit.exe
    #Version=1,3,1,22
    # Parameter related to the version of JInitiator
    #jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
    # EM config parameter
    # Set this to "1" to enable Enterprise Manager to track Forms processes
    em_mode=1
    # Single Sign-On OID configuration parameter
    oid_formsid=formsApp_sales.com_0Axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    # Single Sign-On OID configuration parameter
    oracle_home=C:\OraMid
    # Single Sign-On OID configuration parameter
    formsid_group_dn=cn=Logical Application Group, orclApplicationCommonName=formsApp_sales.com_0A4911717Fxxxxxxxxxx, cn=forms, cn=Products, cn=OracleContext
    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=false
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true
    # EndUserMonitoring
    # EndUserMonitoringEnabled parameter
    # Indicates whether EUM/Chronos integration is enabled
    EndUserMonitoringEnabled=
    # EndUserMonitoringURL
    # indicates where to record EUM/Chronos data
    EndUserMonitoringURL=
    # Example Named Configuration Section
    # Example 1: configuration to run forms in a separate browser window with
    # "generic" look and feel (include "config=sepwin" in the URL)
    # You may define your own specific, named configurations (sets of parameters)
    # by adding special sections as illustrated in the following examples.
    # Note that you need only specify the parameters you want to change. The
    # default values (defined above) will be used for all other parameters.
    # Use of a specific configuration can be requested by including the text
    # "config=<your_config_name>" in the query string of the URL used to run
    # a form. For example, to use the sepwin configuration, your could issue
    # a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
    [sepwin]
    separateFrame=False
    lookandfeel=Generic
    # Example Named Configuration Section
    # Example 2: configuration forcing use of the Java Plugin in all cases (even if
    # the client browser is on Windows)
    [jpi]
    baseHTMLJInitiator=basejpi.htm
    # Example Named Configuration Section
    # Example 3: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms/lservlet/debug
    # Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
    # DS but not AS and is also available for download from OTN.
    [webutil]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=oracle

  • Duplex printing first form - both sides

    I've tried to locate the answer to my issue in the mix ... point me to the answer if I missed it under someone else's question.
    We just got a new printer that has duplex capability. We would like to use this capability and I am converting a two ifd's to one with two pages. The first page has some dynamic data and the second doesn't have any dynamic data. The printer is duplexing but we only get the first page.
    The only error in the Central log is the $POSITION field is missing (I assumed from the second page so I added it). No better. I don't see this new printer under presentment targets but since the printer is actually duplexing I'm thinking it is the form or dat file. I added to a test dat file a field to the non-dynamic data and attempted to 'call' the next form. What am I missing?

    Hi Nancy
    We're doing invoices where we print Terms & Conditions (which is a static subform) on flip side of page 1 (i.e. duplex) and then print the rest of the document without duplex.
    I'm controlling this within the preamble by adding "^duplex on" at the top and the dynamic page 1 causes a page break I call the T&C subform and then use this
    ^define group:PAGETWO \page1,"duplex off"\group[NEXTGROUP].
    to call next dynamic page.
    Additionally we have conditions for when to print T&C. If you want the whole solution please drop me a line at
    [email protected]

  • Running first Form from Form Builder 10g

    Hi. I've upgraded my first 6i form to 10g. In Form Builder 10g (for Windows) I execute the form and it opens it in my Internet Explorer (IE) window instead of the traditional Oracle Run-time window.
    This is fine, except IE has a large header area that includes items like the Internet Address Field, the Search Field, the Back and Forward buttons, various icon buttons for printing, finding, the Tabbed Windows, the home button, etc.... With all this additional space taken up in the browser I don't have as much room for my canvas to display.
    Does this mean I have to adjust the canvas size for all my existing forms to fit this smaller IE area or can I somehow free up more space in the IE window by hidding all these default IE items?
    Any help would be greatly appreciated! Thanks in advance.

    Add these to your WHEN-NEW-FORM_INSTANCE trigger:
    -- browser (main) window
    set_window_property(forms_mdi_window, window_state, maximize);
    --inner window
    set_window_property('YOUR_WINDOW', window_state, maximize);

  • Web form spam by humans?

    I have an employment application form that is getting spammed. The form has a captcha so I'm assuming it is a human filling out the form. I'm looking for any ideas or tips for reducing the amount of spam.
    The solution may be putting the employment application form in a secure area and having applicants sign up.

    Please see this reply http://forums.adobe.com/message/4364404#4364404

  • Web form spam

    Hi I am a novice CF dude. I have a web registration form that gets bogus registrations and I am trying get my users to type in a word to help limit spam. I am not sure how to do this and google and the forums do not show any cf examples.
    I have tried various versions of the following
    <cfset enter="alignment">
            <p><em>Please enter the word <cfoutput>#enter#</cfoutput> in to the field below to help us limit spam.</em></p>
            <br />
             <div class="register">
    <label for="enter">Enter alignment:</label>
                <cfinput type="text" name="enter">
                <cfinput type="hidden" name="enter_required">
            </div>
    If a user does not fill in the field, it will not submit. However, it will accept any text and I want it to except only alignment. any help most appreciated.
    Jim

    I have placed it inside of a .zip file now:
    http://www.betterppt.com/form.zip
    I have found instructions for a procedure that is precisely what I am driving at:
    http://www.blogx10.co.uk/preventing-spam-form-submissions-with-css-and-cgi-5
    But the syntax appears to be slightly different than what is used in my form.cgi script. Or I'm doing something wrong. Probably the latter...

  • Form SPAM

    We continue to have major complaints from clients about SPAM submissions via general inquiry forms on their  BC sites.  All forms have the difficult version of captcha (not recaptcha), but that does not seem to slow the SPAM down.  All SPAM submissions seem to include a URL in the comments field, which appears to be their objective.  Are their other creative solutions to block these bogus submissions?  Can I restrict links or URLs from being added to the comments field? Any suggestions would be appreciated.  Thanks,  Brian

    Hi,
    There's no known way to restrict this from being add within comments. 
    However I would recommend submitting a case on these various spam submissions so support can investigate further to help at least reduce this within the site somehow. 
    Kind regards,
    -Sidney

  • Tabbed Panel : select first form element on tab click

    On tab click, I need to trigger a function so that I can
    focus the first element of the form included in that panel content,
    change the element bgcolor, etc. ... so that the user has the first
    element ready for input.
    Please advise.
    Newbe-by-examples

    Solved. Needs some setTimeout(..)
    Greetings everybody.

Maybe you are looking for

  • Not able to post message

    Hi Moderator, Not sure when I want to post a message in the forum, I was told that I do not have authorization and it said I have to check with the administrator. May I know what is going on? My message need to include an image insert so that it is e

  • Exception while creating the Search view by using ZBOL

    Hi, I created a ZBOL by using http://blogs.moovar.com/sap/sap-crm-create-a-custom-bol-for-web-ic/ It is working fine. I created ZBOL_K. Now based on this I want create a Search and Search Result. http://blogs.moovar.com/sap/sap-crm-web-ic-create-a-ne

  • Pin & IMEI

    This has probably been asked before but I can not see any posts relevant, I purchased a BlackBerry 8320 off eBay and I am trying to see up email, when I put the Pin & IMEI in it says already registered, I have spoken to the old owner to get him to re

  • G4 MDD randomly powers UP!

    Hey all, I have a G4 MDD which ran perfectly until now! I recently purchased a Samsung 2333HD tv for my room which I hook my mac up to via vga. Worked fine to start with, but the next day I couldnt get it to power up. After reading some topics on her

  • How to setup icloud on ipad???

    i've updated the version wanna activate icloud