First Step Start Question

How can the web client get the updates from the web server? What the code should be?
Moreover,
When the user go to the web page at the first time, what the method should be so that the user get the object install or dll or activex downloaded to the web client and register? What the code should be?

You might want to read the developer's guide
[http://java.sun.com/javase/6/docs/technotes/guides/javaws/developersguide/contents.html]

Similar Messages

[QUESTION] First Steps: Java ME SDK 3.0 AND NOKIA N95

Hi! this is my first post in the forums. I am a c# .net programmer and this is my first step to start programing mobile phones with Java ME.
I already downloaded and installed de Java ME SDK 3.0 and try the examples, then i build a sample and generate the jad.
After upload to my N95 it says that cant install the app because is for the N95 or is not supported....(I was thinking like winforms in .net... build install and run ....hahaha!)
but i found that every phone has its SDK that i must install to develop app.
So my question is
If i have the JME SDK 3.0 installed what i need to build any Nokia or Nokia N95 app. If is possible can you tell me the configuration that i need or maybe the steps to install the SDK from nokia to use in JME., apps, emulators, docs, etc.
PD: I want to start an app that tells me the location using the internal gps of the N95.
And sorry for my bad english.
Thanks!

check if ME SDK is configured to MIDP 2.1. Also check whether N95 supports MIDP 2.1 or 2.0; if needed, change SDK build settings to MIDP 2.0. // this seem to be rather popular problem
...I want to start an app that tells me the location using the internal gps of the N95...Google for +"nokia n95 jsr 179"+ (jsr 179 is location API in Java ME).
If you plan to target only Nokia device(s), consider getting help at Nokia Java ME forums.

How to start work on program, first stepe (ezy explanation)?

Good day everyone,
My problem is Homework, I been lazy, so now I starting to work, but I have no idea, So, if anyone can explain or even write me couple first steps of this program,
And if I can find somewhere solution, that be the best or if somebody think that is ezy, can you write me, please.
Thank you
Payroll.java
In this program you are required to:
-input your name
-input the number of hours worked for each day from monday to Sunday
-total the number of hours worked for the whole week
-input the payrate per hour (Assume constant throughout the week)
-calculate the overtime hours and over time pay. Any hours in excess of 40 is considered overtime hours. The overtime payrate is 1.5 times the normal payrate
-output your name, total hours worked, payrate, overtime hours, overtime pay and gross pay

Start yourself and ask specific questions where you are stuck and what the problem is. You Will not learn anything, if you copy and paste a solution a member provides here. If you show that you've tried and thought about it, you 'll get help here.

What is the first step of an abaper after getting the FDS

what is the first step of an abaper after getting the Functional Document ?what we have to do? how to analyze it , and how to face such interview questions on FDS TDS . any resource available.

Hi,
After getting the FDS , first understand the functionality of the requirment or take the help of the functional consultant and then start preparing TS ( TEchnical Specification) and do coding and get your doe reveirewed and prepare test cases and do testign in sand box and quality environment and after having got the confrimation that the requirment is met then port it to production.
Regards,
Irfan
Note: Please award helpful answers.

Using diskpart as the very first step in TS

Hi,
I want to have a very first in TS as hard drive clean and partitioning it. so once WinPE is downloaded, system reboots, it will check 'IsLaptop' or 'IsDesktop' condition and if its Laptop, it should clean the disk 0 and parition it. I have tried to achieve
this but i am getting an error. Its a MDT based TS in Configuration manager 2012 R2 (MDT 2013 is integrated). Laptops are encrypted and just need to be wiped and reload without databackup. I feel this is the easiest way to have dispart clean the disk, recreate
partition based on condition if its laptop.
Steps i am doing is :
1. diskpart. exe /s diskpart.txt - first step in TS, and has condition to run only if 'IsLaptop equals True'. I have created package for diskpart.txt ( i am wondering if this could be an issue, if it tries to download the package on hdd and hdd doesn't have
partition yet)
2. set imageosver to 6.1 - since its for windows 7
3. Format and partition disk 6.1 - will format and create 2 partitions 'OS disk' and 'BDE'
then other steps starts like Use toolkit package, gather and UDI wizard.

You could have the Format/Partition steps run only if the Chassis/Model type = that of a laptop or one of your laptop models. If those parameters aren't met (e.g. PC is not one of the desktop models or doesn't have a the laptop ChassisTypes), the partition/format
steps wont' run.
I've ran into issues when trying to run commandline steps that require files to copy down first. I have the best luck when the drive(s) are properly cleaned, repartitioned, and formatted first.

IPhone freezes in first step of sync

It crashed some days ago, I did a hard reboot but it was sluguish and would not go beyond the first step of sync, or when much, go into step 2 and then loop back to step one. I resetted the thing but the problem continues. I got my contacts in it yet, but all else, apps, music, photos were lost and I cannot reinstall the apps I already own.

Make sure you have the following steps in order in your process chain.
1.Start Process Variant.
2.Delete Indexes step.
3.Load data.
4.Create Indexes.
5.Roll up (if required)
6.Compression(if required)
7.Completion job.
8.PSA deletion(if required)
I process chain should allways start with a start Process variant step.
Thanks,
Uma Srinivasa Rao

First Step in Workflow Verification

Hi,
I did the workflow configuration by using SWU3 successfully. For initial testing, i did Start Verification Workflow and i got the intial workitme in my SAP inbox. The i selected First step in Workflow Verification in my SAP inbox, but in the next sceen it was not displaying the Use Decision Steps (Immediatley and Later). It was showing blank screen. This is happening for all workflows (selected standard workflows for testing purpose). Initial workitem is displaying in my SAP inbox abd after executing nothing is displaying in the second screen. My understanding is becuase of authorization to execute the work item.
If any one faces the same problem, please share with me.
Regards,
Steve

Hi,
Check your container object and see the Decisions are alloted are not?
Standard Program - It will go to another user. it wont come to you.
Regards,
Nandha

Taking a long time to do first step?

Usually Match has been pretty speedy, I have 10000 cuts of music, I chaged ny Genres from 250 to 20 with TuneUp but noeiTunes match seems stuk at the first step? How long should I have to wait before I get concerned?
I was tired of waiting. Turned natch off, then resumed..no difference. SO I turned Match off from iTunes Menue Bar. Now I just wait and wait. Gathering information seems Stuck.. The progress bar has been completed the Whole time I'm waiting..Is this normal? How long could Gathering information Take?
Anyone?

Like many users on the other similar threads, my machine stayed on step one for over 48 hours. At the suggestion from another user comment, I quit iTunes and restarted it.
The "gathering information" progress bar seemed to start over from the beginning, but within an hour, it was underway "Matching your music with songs in the iTunes store".
It has already checked 4,000 of 29,000 songs, but I have a 25mbps up/down FIOS connection.
Would have been nice to know in the beginning....
Another suggestion I took is creating smart folders for each of the following iCloud States: Duplicate, Error and Ineligible
I have lots of errors and ineligibles..... :-(

Iphone 4 sync issue - My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob

My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?

Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

SEM-Business Consolidation starter question

Hi there,
It`s my first attempt in Business Consolidation, hence I`m trying to first create a Data Basis
I am referring to http://help.sap.com/saphelp_sem40bw/helpdata/en/67/f7e73ac6e7ec28e10000000a114084/frameset.htm and it states that I need to first create the following :-
SEM_BCS_TOTALS
SEM_BCS_DOCS
SEM_BCS_INVDTA
SEM_BCS_SUPDTA
I have checked in my Business Content and it`s not there. Please advice if I need to custom create these InfoCube/Virtual InfoCube ?
Next question would be assignment of the followings :- What exactly do I input ?
InfoProvider for MultiCube reporting
InfoObject Catalog for Characteristics
InfoObject Catalog for Key Figure
Appreciate if someone can guide me through my first steps since I it`s my first time doing Business Consolidation.

Hi,
 I created a new Data Basis named Data_Basis_1.
 Selected 0BCS_C11 as Total Records Stream
 Hit 'Yes', when prompted for "Do you really want to generate the data basis?"
 Selected SEM_BCS_CHA01 as InfoObject Catalog for Characteristic and SEM_BCS_KYF01 as InfoObject Catalog for Key Figure
 and it worked magically!
 So, the next logical thing to do would be to assign the Source to the Data Basis created so far.
 According to the link below, the following needs to be done ...
http://help.sap.com/saphelp_sem40bw/helpdata/en/12/f35e32342c4bbd9b36bd18c0371c47/content.htm
 1. Create a source data basis. Enter system A as the RFC Destination. Then under InfoProvider enter your InfoCube with the planning data.
 2. Assign this new source data basis to your data basis.
 3. Create a Load from Data Stream method and select your system A as the RFC Destination and your InfoCube with the planning data as the InfoProvider. If the structure of the planning data does not match the corresponding fields of your data model, define suitable mapping rules.
 4. Execute the new method.
 My scenario here is SEM and BW both resides in the same box. There is a logical connection to SAP R/3 to SAP BW defined
 Please advice how do I proceed here onwards ?
 Appreciate your help, mate!

I just purchased creative cloud. What is the first step I should be taking?

I just purchased creative cloud. What is the first step I should be taking?
I'm unable to download the applications and I'm not sure why. I thought it had something to do with me having the trial prior so I went ahead and deleted it. And I still cannot download the applications. Am I missing a specific step in all of this? I was under the assumption that when I purchased creative cloud, it would be some sort of prompt to install the program (the way adobe normally works) then I would be able to install the applications separately.

Hi Poe7,
Welcome to the Community & thanks for being the Creative cloud member!
The first thing is to download Creative cloud desktop app which will help you to download all the apps available, go to https://creative.adobe.com/products/creative-cloud and download it.
Once downloaded, launch it and select any product to start downloading/installing within the app.
Thanks!
Ankit

First Steps On Oracle

I'm new to databases. I finished installing Oracle9i and I have passwords for two accounts, SYS and SYSTEM.
I can log into isqlplus through http or sqlplus on the command line as SYSTEM, however it doesn't work for SYS.
When I try to log in as SYS it says:
ORA-28009: connection to sys should be as sysdba or sysoper
Well what is the proper method of creating a database. I imagine that I need to create a user account. Is this done while connected as SYSTEM? What are the first steps to take after installation, not that the database is installed correctly?

I can log in like that from the command line:
[prompt]$ sqlplus '/ as sysdba'
SQL>
However how do I log in as sysdba with the browser interface, for example:
[prompt]$ galeon http://myaddress:7778/isqlplus
The browser interface asks me for:
username:
password:
connection identifier:
When I try to enter sysdba as the user name, what password do I use? the SYS password doesn't seem to work. Yet I can purely log in as SYSTEM using SYSTEM's password and it works. I used my Global Database Name for the connection identifier.
Should I just create the new user from the console and log in as the new user from the browser interface? Maybe it's not possible to log in as sysdba using the browser interface because the browser want's passwords.
One more question. What is the significance of a SID? When/how do I use that?

How to create DTR server, first steps...

Hello,
I would like to start using the DT feature.
I see that when I create new Client at my NWDS I am being asked to enter the DRT Server URL. Does this comes with the portal installation (I am using NW 04 SP 11) or should I install it separately? Can anyone please give me "first steps" towards the DT?
10X,
Roy

Ok, here is the info about the plug-in.
+
Using the DTR Administrator Plug-In
Use
The DTR administrator plug-in is an enhancement of the DTR Eclipse client. It allows you to comfortably execute administrative tasks in the DTR.
·        Maintaining the user authorizations for DTR resources
·        Integrating activities
·        Displaying technical properties
·        Creating workspace folders
·        Creating workspaces
·        Creating folders
You can execute several of these tasks, such as creating workspaces and workspace folders or integrating activities, also in the command line client of the DTR.
Prerequisites
·        The user has administrator rights for the respective DTR server.
·        The DTR administrator plug-in is installed and activated:
Maintaining the User Authorizations for DTR Resources
       1.      Open the context menu for the DTR resource (for example, in one of these views: Repository Browser, Open Activities, Activation View, Closed Activities, etc.)
       2.      Choose View Permissions.
The Permissions view appears.
For more information, see User Authentication and Authorization.
Integrating Activities
       1.      Open the DTR view Closed Activities.
       2.      Select one or more activities.
       3.      Open the context menu and choose Integrate to...
A dialog window appears.
       4.      Select the target workspaces.
       5.      Confirm with OK.
Displaying Technical Properties
       1.      Open the context menu for the DTR resource (for example, in one of these views: Repository Browser, Open Activities, Activation View, Closed Activities, etc.) and choose Technical Properties.
Creating Workspace Folders
       1.      Open the context menu of the DTR root node or the workspace folder node (for example, in view Repository Browser) and choose Create Workspace.
For this action, no activity is required.
Creating Workspaces
       1.      Open the context menu of the DTR root node or the workspace folder node (for example, in view Repository Browser) and choose Create Workspace.
For this action, no activity is required.
Creating Folders
       1.      Open the context menu of the workspace node (for example, in view Repository Browser) and choose Create Folder.
For this action, no activity is required.
+
Regards,
Rich Heilman

HT2404 I am currently running OS 10.5.8 What is going to be my FIRST step to take to upgrade to an OS that will allow me to use iCloud? I am an absolute novice!

I am currently running OS 10.5.8 What is going to be my FIRST step to take to upgrade to an OS that will allow me to use iCloud? I am an absolute novice!
thanks!

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

Processing workflow reject on first step

Hi all,
May i know how to process reject code when workflow reject happens on the very first step.
I understood that if happens on the second step, we should process the reject code on the entry event of the first step, but may i know how it happens on the first step?
thanks

Review/Edit Revision, or Review/New Revision types of workflow steps provides an option, but not necessity to modify the content (the current, or a new revision). Therefore, yes, it is possible to have a Review/Edit Revision step with zero reviewers. It will forward processing the next step (note that you could define Entry, Update, or Exit event scripts for this step, so a "zero reviewers" step can serve as a fork).
On the other hand, it is not possible to jump to a Review step after rejection. From whatever reason it follows the design that rejection expects the content item to be changed, which cannot be done in a Review step. Another (IMHO illogical) design aspect of REJECT is that it does not execute the Exit event.
Having asked the first question, yes, you could place an arbitrary zero reviewers Review/Edit Revision step in front of a Review step to achieve that REJECT returns to the Review step (it will return the the Review/Edit Revision, but follow immediately to Review).

First Step Start Question

Similar Messages

Maybe you are looking for