Fiscal year 2010 Not allowed while creating Process order in COR1

Dear Friends,
We have gone SAP live in the month of October. The fiscal yeat we are using is 2011 as the client is Indian client. I have made the fiscal year variant for 2011 (V3). The FI document posting with Fiscal year 2011. It is also creating the Controlling document and Profit center document without any problem.
We have also made the period open as 2011 in MMpv and MMRV. The goods receipts is working fine and the finance entry and material document gets generated for the fiscal year 2011.
Now we are creating the process order in COR1 and getting the error message Fiscal year 2010 not allowed as below.
Fiscal year 2010 is not allowed
Message no. F5568
Diagnosis
The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
System Response
Error.
Procedure
Correct the fiscal year entered.
In KP26 we have maintianed for activity price for 2010 &  2011 and the system is picking the data for the fiscal year 2010 data and not the FY 2011 data.
I have checked in OKEQ (Costing version '0') The valide start date for FY2011 is 01.04.2010.
Is there any other place to maintain the fiscal year in Controlling area or Prodduction Planning???
I last my patient last 5 days doing R&D. Can any one help me where the fiscal year is picking and why it is picking FY 2010??
Regards,
Devendran

Hi Ajay,
Thank you for your comments. I have checked the Factory calendar and that is 2010 (January to December). We have tried to change to 2011 but the system automatically picking the date from January 1st 2011 to 31st December 2011. I am unable to create calendar year with date from 01.04.2010.
I have discussed with my PP consultant about this issue, he is telling the factory calendar nowhere related to Fiscal year. Do you have any idea how to change the factory calendar of 2011 from 01.04.2010 to 31.03.2011??  Is there any there reason why my system considering the Fiscal year 2010 instead of 2011???
Your inputs will defenitely help me to get an clue.
Regards,
Devendran

Similar Messages

  • Costing Error While creating Process Order in COR1

    Hi when i am trying to release the process order in COR1, I am getting the below error *The business transaction
    cannot be carried out*
    System status CSER is active (ORD 00000000001)
        Message no. BS013
    Diagnosis
        Object ORD 00000000001 has system status CSER (Error in cost
        calculation).  According to this status, transaction 'Release' is not
        allowed.
    Procedure
        You can only carry out the requested function if this is allowed
        according to the status of the object.
    Kindly Help me to fix this issue
    thanks
    Kishore
    Edited by: Emergys Corp on Jan 6, 2010 8:23 AM

    hi,
    goto OPJH and check the nature of the status profile assigned to the PP order type..
    hope this mite help
    regards
    sayeed

  • Fiscal year 2014 not allowed

    Hi,
    we have set up fiscal year 2015 (tr. OB29). 04/2014  = 01/2015, 05/2014 = 02/2015, ...
    In FI, MM all processes work correctly, today (1.4.2014 is posted to fiscal period 01/2015)
    But  if I creating in SD sales order with document date 1.4.2014 system generate error message no.F5568
    Fiscal year 2014 not allowed.
    Thank you for advice.  
    Bernard

    Hi Eli,
    I am still in the preparation phase (this is an additional requirement from the client) and i am configuring in the Sandbox. Once i completed the tasks i thought of activating the FM as if i activate it may affect the testing of other module.
    Your suggesion please.
    Regards
    Hari

  • "Activity type 420 1002 2393074 in the fiscal year 2010 not valid" PM03

    We have an issue with the PM03 for the year 2010. "When the scheduler tries to schedule the pm..He gets an error "Activity type 420 1002 2393074 in the fiscal year 2010 not valid" The planner will close the work order then re-open it. The error will go away, but when the work order is scheduled there is 0 hours scheduled.. This will be a big issue if there are not any hours assigned to work orders.
    Can you help me?
    Thanks!

    Davison,
      Please maintain the prices for the activity type, Cost center combination for the fiscal year 2010 using transaction KP26. The log generally disappears after you save and leave the transaction. You will see the log again only when you reschedule the order and are in the same transaction.
    Also check whether "scheduling" has been activated for the PM03 control key for scheduling to be taken into consideration for the operation.You can view the same by using the drop down for the control key on the transaction.
    Regards
    Narasimhan

  • Fiscal Year Not allowed while creating the Process order (COR1)

    Hi Friends,
    My Indian client is following the Fiscal year of 2011 for the period of April 2010 to March 2011). We have gone live one month before. But now the problem we are facing is while creating the process order (T.Code COR1) system gives the error message "Fiscal year 2010 is not allowed".
    The Diagnosis shows as below
    Fiscal year 2010 is not allowed
    Message no. F5568
    Diagnosis
    The fiscal year entered (2010) is different from the fiscal year derived from the posting date and fiscal year variant (2011).
    System Response
    Error.
    Procedure
    Correct the fiscal year entered.
    I have Checked the Controlling area version. Fiscal Year 2011 starts from 01.04.2010. This issue is only at the time of Process oder creation and not in other module like FI, MM, SD, PS, QM and PM. I have checked with V3 Variant also and there is no problem with that.
    Can any one help me where the setting is missing or what whould be the probable reason for this issue.
    Regards,
    Deva

    Hi Prakash,
    Thank you for your reply. I have checked the MMPV and MMRV set up and that is fine with fiscal year 2011. We are also processed lot many Material receipts for the fiscal year 2011. I have checked with OB52 for finace it is opened for the entire year of 2011 from 2009 for all periods.
    We are facing only when we try to create the process order. When we enter the starte date as 24.11.2010 the derived period shows as fiscal year 2011. But entered fiscal year shows as 2010. We are not entering any other dates in the process order.
    Is there any other probablity the date is picking from any Production related set ups??
    The costing version fiscal year 2011 starts from 01.04.2010. So no problem with Controlling area. I have Checked the Factory calendar. The calendar starts from 01.01.2010 to 31.12.2010 for the year 2010.
    Is there any other possibility of the missing settings or problem in date control???
    Regards,
    Deva

  • Dump while creating Process Order -COR1

    Hi,
                    I am getting dump while creating a Process Order thru COR1. the dump error discription GETWA_NOT_ASSIGNED .

    HI omprasath rajendiran,
    Do you solve the problème, because i get the same problème with COR1 ?

  • Error in manual batch determination while creating process order

    Hi Expert,
    Manual batch determination is happening for some of material and for some material it is working firne  when creating process order,
    Pleae assist
    Thanks
    Intekhab

    Dear,
    please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
    There it will show the error tht occured during costing
    Please refer this thread,
    Cost error when saving production oredr
    Regards,
    R.Brahmankar

  • Price not picking while creating purchase order

    hi all,
    i have created a pricing procedure and assigned to the vedor, but while creating purchase order the material price is not picking up.if i use the standard one the price is picking up. can anyone explaing any setting iam missing.
    regards
    thyagarajan

    Hi
    In your pricing procedure
    For the condition type Automatic Gross price PB00, you have assigned am Access sequence.
    <b>Access sequence</b>: An access sequence is a search strategy by means of which the system searches for valid records in various condition tables. It consists of one or more accesses. The sequence of accesses controls the priority of the individual condition records among each other. Through the accesses, the system is told where to look first and where to look next for a valid condition record in each case.
    Once the pricing procedure triggers, System looks for the valid condition recorrd for the condition type PB00 as per the priority listed in Access sequence.
    Example: If purchase info record is the first priority and you maintained the Info record then system picks the price from Info record into PO.
    If no valid condition record found then it will trigger PBXX Manual Gross price condition in PO and ask to enter the price manually.This is called condition technique.
    So check whether you maintained the Condition record for PB00 or not?
    Regards
    Ramakrishna

  • Stop Creation of reservation while creating process orders....

    Hi All,
    THe requirement is to stop creation of reservations on creation of process order.
    have done the configuration in order type dependent parameters to stop creation of reservations on creation of process order.
    After this configuration the reservations have stopped appearing in the MMBE for components although there are reservation created.
    The above case appears only when i am creating process orders manually through transaction COR1....But when process orders are created by converting Plann order then in this case although the order type is same there are reservations visible in the MMBE transaction for the components.
    Request you to please guide through the reason for creation of reservations when a process order is created by converting a plan order.
    Thanks in advance for your help.
    Vinit

    Hi All,
    We are using the planning strategy 40 where in we produce only when the sales order is received.
    For a material we are using SPK as stock transfer from other plant.
    The requirement for this material is triggered due to 1)dependent reservation(as this component is used as a component to manufacture other material 2)Sales requirement for this material.
    On MRP the requirement is transferred to the supplying plant and we receive the stock in our plant.
    Now this stock is the total of requirement generated to fulfill the sales requirement and the consumption requirement.We cannot differentiate which stock was called in for sales order and which for fulfilling the production requirement of the superior material.
    Whenever a production order for the superior material is created reservation for this material are created because of which the stock will not be available for creation of deliveries for sales orders.(This is because of the av checking rule)
    Is there a way to differentiate these stocks.
    We thought about creating MRP areas to manage the requirements differently but this will lead to creation storage locations and thus affect our global template.
    Thus we thought of blocking of creation of reservations......this we thought as all the materials are already available by the time the process order is created so there is no point in creating reservations for the same.
    Let m know if you need any further information .......Help me providing a proper solution to the issue.
    Thanks in advance

  • Can we restrict storage type while creating a order in COR1?

    Hi
    When we create a process order in COR1 then we enter material list... in that we specify plant stor loc of the material..
    my req is if the material type of material is XXX then if its stor loc is ZZZ then it shud look for only 3 storage types ie A, B & C.
    Where can I put this condtion..
    I tried writing code in user exit EXIT_SAPLCOSD_001 but not getting how to apply the logic.. plz guide on this...
    Regards

    Hi,
    In include ZXCO1U0
    Right this code
    If STRLC_HEADER_I  ne 'A' and  STRLC_HEADER_I ne  'B' and  STRLC_HEADER_I ne ' C'
    Message 'Error' Type E.
    Endif.
    Revert back if you need further help
    Regards,
    Vishal

  • PARTNER PROCESSING OBJECT BUS2032 NOT FOUND WHILE CREATING SALES ORDER

    Hi All,
             I am not able to create a sales order it gives a Error "PARTNER PROCESSING OBJECT BUS2032  not found".  Can any one inform me what could be a problem. Thanks in advance.

    Yes, The Partner function SP is active.
    We had a work around.
    When the sales order was saved, being in Partner function Tab we got the error message. However when we returned to the Overview and saved the Order, we were through with the same. But, Iam not sure how could this happen.

  • Virtual column not allowed while creating "simple view"

    hi,
    i have created a simple view
    systax:
    create view empvu30
    as select empno id_number,ename Name,sal*12 ANN_SALARY
    from emp where deptno=30;
    when i am going to update this view i am getting error:
    ORA-01733: virtual column not allowed here

    user10492712 wrote:
    hi,
    i have created a simple view
    systax:
    create view empvu30
    as select empno id_number,ename Name,sal*12 ANN_SALARY
    from emp where deptno=30;
    when i am going to update this view i am getting error:
    ORA-01733: virtual column not allowed hereThe error is correct as you have a transformation done on the Sal column which can't be updated. That's why the error is thrown to you.
    Please read this link,
    http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/views001.htm#i1006127
    >
    If the view was created by using an expression, such as DECODE(deptno, 10, "SALES", ...), then rows cannot be inserted into or updated in the base table using the view.>
    HTH
    @Pavan,
    That's different question altogether. I don't think OP question falls in that thread's context.
    Aman....

  • Error while creating process order

    Hi,
    While creating a process order I am getting an error.
    The error is :
    Error while calculating costs for order xxxxxxx.
    how to solve this?

    Dear,
    please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
    There it will show the error tht occured during costing
    Please refer this thread,
    Cost error when saving production oredr
    Regards,
    R.Brahmankar

  • While creating Process Order system has to validate the Batch field

    Hi All,
    While creating the Process Order system has to validate the Batch field which comes under Goods Receipt tab. Please let me know is there any standard user-exit is there for this requirement.
    Regards
    Naveen

    Dear Swapnil,
    Thanks for the reply,
    At the time of creation of process order I am entering the External Batch no as per the logic i.e. first two letters as 08 (for year), next two letter as section 51 (for solid mfg section, which i am planning to maintained in the Z table) and last three letters as 001 (for serial no in this section). so batch no is 0851001.
    Now i want to validate these all letters as per the above logic i.e first two letter should be cross check with current year, and next two letter with Z table for section and last three letters for sr no with previous batch, which is already created for this section.
    Now can you please help me to find out the function exit or screen exit to validate the above requirement at the time of creation of process order i.e. COR1, under the Goods receipt tab. 
    Thanks in advanced
    Naveen

  • Error message BP does not exist while creating service order in WEB UI

    Hi Experts,
    i have an issue while creating a service order in WEB UI the system is automatically taking the BP ""created By"" but while saving the document Error message showing "BP does not exist"
    we have already completed set up integration with HR .created the user as  BP Role "employee"
    Kindly suggest what are the other configuration that need to be checked.
    Regards,
    D Panda

    Hi,
    Have you made the assignment of the user (defaulting in created by) to the employee (under the identification tab in employee)?
    Regards,
    Parul

Maybe you are looking for