FIX Protocol
I am trying to learn technical details about how Oracle integrates with the FIX Protocol.
Can anyone help me find references on it and samples of how you would use PL/SQL to access FIX API's.
Thanks in advance.
Please refer -
FIX protocol Support
Regards,
Anuj
Similar Messages
-
closed Support for FIX protocol in OSB for Financials
Hi,
I am trying to find out the FIX protocol support in OSB and found out the fix adapter guide in the following location:
http://download.oracle.com/docs/cd/E13185_01/fmd/docs10gr3/pdf/FIX.pdf
From this document i am unable to get how this can be used in OSB for financials. If anybody has more documentation/tutorial for FIX support, please give me your insights.
Thanks
Siva
Edited by: user13061887 on 03-May-2010 01:33I don't understand the issue at hand. Did you download the OSB financial edition. It comes with a design time which will allow you to create catridges for fix. Once the cartridge is configured, you have to export the cartridge for java class. these java classes are imported into OSB and invoked via java callout.
Let me know if you need more information.
Manoj -
The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
Any idea how it can be fixed??????Hello,
You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy. There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player? Not knowing the model of the Sony it is hard to investigate.
And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
JT -
<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/782039]</blockquote><br>
When trying to stream video I am getting this error message "Firefox doesn't know how to open this address, because the protocol (st) isn't associated with any program." How do I fix this?Protocol error usually indicates that the very leftmost part of the URL is not recognized.
So http://, ftp://, rtsp://, usually work.
ableton:// would need to be added by some software somewhere...
Can you get instructions from the vendor? Does these posts seem relevant:
[http://forum.ableton.com/viewtopic.php?f=32&t=112368 Ableton Forum • View topic - [dds] Bug with Fireforx browser and downloading project?]
[http://forum.ableton.com/viewtopic.php?f=32&t=109918 Ableton Forum • View topic - [gck] Problem downloading shared sets from Ableton server.]. -
How do I fix a broken SMB protocol so my Sonos sytem works again?
Hi,
I'm new to this, so bear with me.
I have been running a Sonos Play 3 since June 2013 without any problems. Two days ago I got a messsage on the Sonos Controller software saying;
"Unable to play ‘song name’ - cannot connect to //'my mac'/Music because the server cannot be found"
So I put in a ticket with Sonos Support and they've told me the following;
"The bug is not with Sonos, we see this problem a lot with Macs because SMB is broken. Sonos is able to play your music on your computer because your computer has to share the folder on the network. It does this with with a protocol called SMB.
If you don't want to upgrade I recommend you purchase a NAS(network attached storage) drive and move your music to it and share the NAS drive to Sonos."
I don't really want to run Mavericks because I'm used to Lion.
So my question is this - how to a fix a broken SMB? Can a borken SMB be fixed?
Any help would be greatly appreciated.If you have Apple Care or your computer is still under warranty, call and get a case number. At least you will not have to pay for the repair if the crack is not "accidental" damage.
Do-It-Yourself Laptop Repair
Research YouTube's 'How To' video tutorials
FixYa -
Can't open any links within the emails using Firefox. I can open them in other browsers however. The message reads, "Firefox doesn't know how to open this address, because the protocol (blockedhttp) isn't associated with any program.". How can I fix this?
Looks like blocking software to purposely block a page by messing with the url.
*http://kb.mozillazine.org/Parental_controls
*http://kb.mozillazine.org/Blocking_sites (more links) -
I have used Spotfy Music App on Facebook on my home computer, now trying to use on laptop, and i get this ERROR CODE: Firefox doesn't know how to open this address, because the protocol (spotify) isn't associated with any program. How can I fix this? Thanks in advance for any help
Hi,
You may have to install the Spotify application on the laptop to get Spotify protocols recognized. -
We have a new computer and I cannot get my garmin running watch to sync with mozilla. The error message that I keep getting is"The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (connectagent) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
Help pleaseThis is for a special URL that starts with
connectagent://
instead of with
http://
is that right?
Two thoughts:
(1) Could you try changing a setting for your Garmin plugin. Here's what I mean:
Open the Add-ons page using either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Plugins.
Find your Garmin plugin change "Ask to Activate" to "Always Activate".
Your system information seems to list two different versions of a similarly named plugin. I'm not sure whether that is causing a problem.
(2) Does Garmin's documentation specify any extra steps to set up Firefox, other than installing its add-ons? -
Installation of Network Time Protocol Security Fix
Hi....
Per App Store, I installed the fix with no issues clicking "install now." But, Mom's Mac did the automatic install. She saw the message window saying a security update was installed. But, in the Application Store Upgrade section, this security upgrade is not listed. Previous software updates are listed. For "fun of it" I downloaded the pkg with the update and "re-installed" it on my Mac, It installed.
Questions:
1. Did I mess up my Mac by doing the install twice?
2. If not, can I do the same on Mom's Mac to be sure the update is installed?
3. Why wouldn't the automatic install (on Mom's machine) not show up on the list of updates? Is this the usual state for automatic updates?
4. What could I look at to see if the update was installed besides the lupdate list where it doesn't show up.
Thanks!John, many thanks! Took me a bit to find the install.log, but yes, the entry was there. For my "self install" on the package, log said, "Installed "NTPUpdateYosemite-2"
BTW: I checked the fingerprint of the package I downloaded, and it did not match the fingerprint in this Apple article at How to verify the authenticity of manually downloaded Apple Software Updates - Apple Support But, the fingerprint of the package I downloaded did match the fingerprint of the package for the "Digital Camera RAW Compatibility 6.02" package that came out Dec 15th. So, I think that the package I used was legit. Make sense?
ALSO...I did find this info on Apple website posted today. About OS X NTP Security Update - Apple Support It has terminal command for seeing if your NTP is updated. [Just saw you edited your reply to include this]
And, finally....Thanks so much for helping a relative newbie to software "stuff" -
Everytime I try to log on to any website that requires a username & password, I receive the following error: SSL protocol has been disabled. I have tried all of the suggested solutions to this issue - but to no avail. I cannot log on to yahoomail. gmail, hotmail, ebay, paypal, or any other site that requires a user name and pass word. Internet Explorer works just fine - and again I have tried all the solutions suggested on the firefox support forum - but none have worked
== URL of affected sites ==
http://www.yahoo.com
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; InfoPath.2; .NET CLR 1.1.4322)Check your settings on Tools > Options > Advanced > Encryption; see: http://support.mozilla.com/en-US/kb/Options+window+-+Advanced+panel#Encryption_tab
-
Apple online did a great job on troubleshooting my yahoo mail connectivity issue. They said yahoo has made changes that has affected mail service access. we setup yahoo mail under the IMAP protocol vs the POP. Call apple for help.
It's nice of you to share your good experience with iTunes support with the rest of us here in ASC. I'm glad that it went well for you.
-
Apple has no idea how bad their I.D. system is because they have an auto response set up that means they can stay totally uninformed about it unless you are willing to pay $59 for a one-time help service call. I only want to load up my $25 iTunes Gift Card, and to pay $59 for this is not an option for me. The problem is when I try to change my password, the email notification goes to another email address, not the email address I filed with Apple when I opened my account and there is nothing in my account setup that allows me to change this. Apple apparently does not want me to purchase or use an iTunes Gift Card, because I won't use it until Apple fixes this problem they have with their system and everytime I try to get support I get an auto response that is of no help at all; the account password change notification still goes to an email address that is not mine.
I have experienced the exact same problem. There is no good solution to these poorly designed and overly complex login protocols. After unsuccessfully trying to retrieve my password or change my password I finally set up a new email account, a new Apple ID and a new iTunes account.
I know it is not a good solution, but it worked. -
Can't fix fglrx/Xorg black screen issue, no matter what I try!
I've tried everything that I can think of or find online to fix this. Please help.
I'm getting what seems to be an oft-recurring issue where Xorg simply won't start when using the fglrx driver. It boots fine with VESA or Xfree86-ati, but using fglrx I just get a black screen that won't accept any input, although ssh'ing into the box while this is happening still works.
I've been reading forum posts for *days* now trying to get this to work. I've tried every combination of 12.4/12.6 drivers, Xorg 1.11/1.12 and modeset/nomodeset kernel parameters. I definitely do not have any radeon or other DRI modules compiled into my kernel. I have an HD4200, SLiM/Xfce4, and I'm using the proper catalyst-hd234k package. The fglrx module has been compiled for my kernel and added to my initramfs, and it loads at boot. lsmod reveals its presence and does *not* show 'radeon'. I have uninstalled every video driver aside from fglrx and Xfree86-vesa. Output does not seem to be going to HDMI instead. Switching consoles/typing blindly does not work, and I need to hold the power button for 5 seconds to shutdown. I've run aticonfig --initial and tried aticonfig --acpi-services=off, too.
I've tried *all* the different tweaks that I've found to try to make a working xorg.conf, but here's what I'm trying to use now:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#Section "Module"
# Load "extmod"
# Load "dri"
# Load "glx"
# Load "dri2"
# Load "record"
# Load "dbe"
#EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
Option "EXAPixmaps" "off"
Option "XAANoOffScreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1440x900" "1366x768"
EndSubSection
EndSection
My Xorg log seems fantastically uninformative, since it seems to show the fglrx module loading and does not report any errors:
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 19.388] X Protocol Version 11, Revision 0
[ 19.388] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 19.388] Current Operating System: Linux splice 3.5.3-1-ARCH #1 SMP PREEMPT Tue Sep 18 00:11:37 EDT 2012 x86_64
[ 19.388] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=228ebc5f-ada6-4d9c-9e93-fc645085e5cd ro quiet nomodeset resume=/dev/sda5 init=/bin/systemd
[ 19.389] Build Date: 27 August 2012 08:04:39AM
[ 19.389]
[ 19.389] Current version of pixman: 0.26.2
[ 19.389] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.389] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.389] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 18 07:02:13 2012
[ 19.496] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.769] (==) ServerLayout "X.org Configured"
[ 19.769] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 19.769] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 19.790] (**) | |-->Device "aticonfig-Device[0]-0"
[ 19.790] (**) |-->Input Device "Mouse0"
[ 19.790] (**) |-->Input Device "Keyboard0"
[ 19.790] (==) Automatically adding devices
[ 19.790] (==) Automatically enabling devices
[ 19.993] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.993] Entry deleted from font path.
[ 20.193] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.193] Entry deleted from font path.
[ 20.193] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.195] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.196] Entry deleted from font path.
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 20.196] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 20.196] (**) Extension "Composite" is disabled
[ 20.196] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 20.196] (WW) Disabling Mouse0
[ 20.196] (WW) Disabling Keyboard0
[ 20.196] (II) Loader magic: 0x7c8b00
[ 20.196] (II) Module ABI versions:
[ 20.196] X.Org ANSI C Emulation: 0.4
[ 20.196] X.Org Video Driver: 12.1
[ 20.196] X.Org XInput driver : 16.0
[ 20.196] X.Org Server Extension : 6.0
[ 20.198] (--) PCI:*(0:1:5:0) 1002:9712:17aa:21b8 rev 0, Mem @ 0xc0000000/268435456, 0xd0400000/65536, 0xd0300000/1048576, I/O @ 0x00009000/256
[ 20.198] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.198] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri2" will be loaded by default.
[ 20.198] (II) LoadModule: "extmod"
[ 20.439] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.468] (II) Module extmod: vendor="X.Org Foundation"
[ 20.468] compiled for 1.12.4, module version = 1.0.0
[ 20.468] Module class: X.Org Server Extension
[ 20.468] ABI class: X.Org Server Extension, version 6.0
[ 20.468] (II) Loading extension MIT-SCREEN-SAVER
[ 20.468] (II) Loading extension XFree86-VidModeExtension
[ 20.468] (II) Loading extension XFree86-DGA
[ 20.468] (II) Loading extension DPMS
[ 20.468] (II) Loading extension XVideo
[ 20.468] (II) Loading extension XVideo-MotionCompensation
[ 20.468] (II) Loading extension X-Resource
[ 20.468] (II) LoadModule: "dri"
[ 20.468] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.545] (II) Module dri: vendor="X.Org Foundation"
[ 20.545] compiled for 1.12.4, module version = 1.0.0
[ 20.545] ABI class: X.Org Server Extension, version 6.0
[ 20.545] (II) Loading extension XFree86-DRI
[ 20.545] (II) LoadModule: "glx"
[ 20.554] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.685] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 20.685] compiled for 6.9.0, module version = 1.0.0
[ 20.685] (II) Loading extension GLX
[ 20.685] (II) LoadModule: "dri"
[ 20.685] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.686] (II) Module dri: vendor="X.Org Foundation"
[ 20.686] compiled for 1.12.4, module version = 1.0.0
[ 20.686] ABI class: X.Org Server Extension, version 6.0
[ 20.686] (II) LoadModule: "record"
[ 20.686] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.716] (II) Module record: vendor="X.Org Foundation"
[ 20.716] compiled for 1.12.4, module version = 1.13.0
[ 20.716] Module class: X.Org Server Extension
[ 20.716] ABI class: X.Org Server Extension, version 6.0
[ 20.716] (II) Loading extension RECORD
[ 20.716] (II) LoadModule: "dbe"
[ 20.717] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.742] (II) Module dbe: vendor="X.Org Foundation"
[ 20.742] compiled for 1.12.4, module version = 1.0.0
[ 20.743] Module class: X.Org Server Extension
[ 20.743] ABI class: X.Org Server Extension, version 6.0
[ 20.743] (II) Loading extension DOUBLE-BUFFER
[ 20.743] (II) LoadModule: "dri2"
[ 20.743] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.811] (II) Module dri2: vendor="X.Org Foundation"
[ 20.811] compiled for 1.12.4, module version = 1.2.0
[ 20.811] ABI class: X.Org Server Extension, version 6.0
[ 20.811] (II) Loading extension DRI2
[ 20.811] (II) LoadModule: "fglrx"
[ 20.811] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22.869] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 22.869] compiled for 1.4.99.906, module version = 8.97.2
[ 22.869] Module class: X.Org Video Driver
[ 22.871] (II) Loading sub module "fglrxdrm"
[ 22.871] (II) LoadModule: "fglrxdrm"
[ 22.871] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22.979] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22.979] compiled for 1.4.99.906, module version = 8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 22.979] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 22.979] (++) using VT number 7
[ 23.041] (WW) Falling back to old probe method for fglrx
[ 23.355] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 23.449] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[ 23.465] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 23.477] (II) AMD Video driver is signed
[ 23.478] (II) fglrx(0): pEnt->device->identifier=0x1cdc440
[ 23.478] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 23.478] (II) Loading sub module "vgahw"
[ 23.478] (II) LoadModule: "vgahw"
[ 23.478] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 23.488] (II) Module vgahw: vendor="X.Org Foundation"
[ 23.488] compiled for 1.12.4, module version = 0.1.0
[ 23.488] ABI class: X.Org Video Driver, version 12.1
[ 23.489] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 23.489] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 23.489] (==) fglrx(0): Default visual is TrueColor
[ 23.489] (**) fglrx(0): Option "DPMS" "true"
[ 23.489] (==) fglrx(0): RGB weight 888
[ 23.489] (II) fglrx(0): Using 8 bits per RGB
[ 23.489] (==) fglrx(0): Buffer Tiling is ON
[ 23.508] (II) Loading sub module "fglrxdrm"
[ 23.508] (II) LoadModule: "fglrxdrm"
[ 23.508] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.508] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 23.508] compiled for 1.4.99.906, module version = 8.97.2
[ 23.525] ukiDynamicMajor: found major device number 251
[ 23.526] ukiDynamicMajor: found major device number 251
[ 23.526] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 23.526] ukiOpenDevice: node name is /dev/ati/card0
[ 23.526] ukiOpenDevice: open result is 12, (OK)
[ 23.526] ukiOpenByBusid: ukiOpenMinor returns 12
[ 23.526] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 23.526] (**) fglrx(0): NoAccel = NO
[ 23.526] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 23.526] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[ 23.526] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x21b8)
[ 23.526] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 23.526] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 23.526] (--) fglrx(0): MMIO registers at 0xd0400000
[ 23.526] (--) fglrx(0): I/O port at 0x00009000
[ 23.526] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 23.555] (II) fglrx(0): ATIF platform detected
[ 23.556] (II) fglrx(0): AC Adapter is used
[ 23.576] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 23.582] (II) Loading sub module "vbe"
[ 23.582] (II) LoadModule: "vbe"
[ 23.603] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 23.617] (II) Module vbe: vendor="X.Org Foundation"
[ 23.617] compiled for 1.12.4, module version = 1.1.0
[ 23.617] ABI class: X.Org Video Driver, version 12.1
[ 23.629] (II) fglrx(0): VESA BIOS detected
[ 23.629] (II) fglrx(0): VESA VBE Version 3.0
[ 23.629] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 23.629] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 23.629] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[ 23.629] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 23.629] (II) fglrx(0): VESA VBE OEM Product: RS880M
[ 23.629] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 23.652] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 23.652] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 23.652] (II) fglrx(0): PCIE card detected
[ 23.652] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 23.652] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 23.655] (II) fglrx(0): Using adapter: 1:5.0.
[ 23.663] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 23.691] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[ 23.691] (II) fglrx(0): RandR 1.2 support is enabled!
[ 23.691] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 23.692] (==) fglrx(0): Center Mode is disabled
[ 23.692] (II) Loading sub module "fb"
[ 23.692] (II) LoadModule: "fb"
[ 23.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.722] (II) Module fb: vendor="X.Org Foundation"
[ 23.722] compiled for 1.12.4, module version = 1.0.0
[ 23.722] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.722] (II) Loading sub module "ddc"
[ 23.722] (II) LoadModule: "ddc"
[ 23.722] (II) Module "ddc" already built-in
fglrxinfo while running Xorg without an xorg.conf gives me this:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12
And in a console it tells me that it can't open display(null)... all of which I suspect is expected behaviour when the driver is not actually in use. I just wish something would tell me what's actually *wrong*, here, instead of just expecting me to magically figure out exactly the right configuration that will actually let me use fglrx.
I... I just want to be able to play minecraft. :`(
Last edited by Medlam (2012-09-18 13:48:42)I'm sure you've tried reading https://bbs.archlinux.org/viewtopic.php?id=57084
and http://wiki.cchtml.com/index.php/Configuring
and I'm sure you've done
aticonfig --initial
I had to use https://wiki.archlinux.org/index.php/AT … leshooting, specifically the part about disabling EXAPixmaps to make my card work.
What model is your ATI card? that would help. A LOT of ATI cards were dropped from proprietary support with the Catalyst driver. -
How do I/Do I need to fix "ata#.00 status { DRDY }" error?
I've got an old server that used to be running windows that I have received to set up with linux for myself. As I was working with it, I remembered that I had an old computer that I was just going to trash/give away anyways, of which many components would be better. I have since set up a computer that's a mash of components between the two and everything seems to run perfectly except for one problem: I keep getting this error: (Where "#" is either 2, 3, or 4)
ata#.00: exception Emask 0x50 SAct 0x0 SErr 0x48900 action 0x6 frozen
ata#: SError: {UnrecovData HostInt 10B8B Handshk }
ata#.00: failed command WRITE DMA
ata#.00: cmd ca/00:88:9f:ca:8d/00:00:00:00:00/e8 tag 0 dma 69632 out
res 50/00:88:9f:ca:8d/00:00:9e:c9:8d/e8 Emask 0x50 (AtA bus error)
ata#.00: status: { DRDY }
This error occurred once for each of the three numbers (which also happens to correspond to the three sata ports my HDs are plugged into): 2 and 3 while I was using dd to zero them (I zeroed all three but 4 didn't give any errors), and 4 just after installing grub onto a mirror raid composing of HDs 2 and 3.
All of the HDs originally used IDE so I used a converted to switch them (Model number CB-IS100)
Additionally, when deconstructing the computers, one of the sata cables tore the first female connector out of the motherboard (hence why they start at 2), but while I know that's not preferable, I don't think it would cause this error.
Finally, this motherboard was in a computer that had, as far as I could tell, a poor power supply that cause it to reboot when using a lot of CPU power.
My question is really this: Will this cause any major problems or can I ignore it? Also, is there anything I can do to fix it?
This is my dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-i686-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Oct 19 00:29:46 CEST 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000987ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000098800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedf7ff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfedf800-0x00000000cfedffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: HP Pavilion 061 ER879AA-ABA M7457C/EMERY, BIOS 3.15 06/23/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xcfedf max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5f80-0x000f5f8f] mapped at [c00f5f80]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
[ 0.000000] Base memory trampoline at [c0094000] 94000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x00877000, 0x00877fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7ef2f000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x3672d000-0x377fddaf]
[ 0.000000] Move RAMDISK from [mem 0x7ef2f000-0x7ffffdaf] to [mem 0x3672d000-0x377fddaf]
[ 0.000000] ACPI: RSDP 000f82e0 00014 (v00 HP-CPC)
[ 0.000000] ACPI: RSDT cfee3040 00030 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP cfee30c0 00074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT cfee3180 0505D (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS cfee0000 00040
[ 0.000000] ACPI: MCFG cfee8340 0003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC cfee8240 00084 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2438MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x00878000, 0x00878fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0xcfedefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00097fff]
[ 0.000000] node 0: [mem 0x00100000-0xcfedefff]
[ 0.000000] On node 0 totalpages: 851574
[ 0.000000] free_area_init_node: node 0, pgdat c06d7740, node_mem_map f4d2d020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3991 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4878 pages used for memmap
[ 0.000000] HighMem zone: 624353 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0xcff00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f4ce3000 s33536 r0 d23808 u57344
[ 0.000000] pcpu-alloc: s33536 r0 d23808 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 849798
[ 0.000000] Kernel command line: BOOT_IMAGE=boot/i686/vmlinuz archisobasedir=arch archisolabel=ARCH_201311 initrd=boot/i686/archiso.img
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 6813424 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cfedf)
[ 0.000000] Memory: 3346976K/3406296K available (4262K kernel code, 426K rwdata, 1356K rodata, 608K init, 948K bss, 59320K reserved, 2497412K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc06e9000 - 0xc0781000 ( 608 kB)
.data : 0xc0529d5e - 0xc06e8a00 (1787 kB)
.text : 0xc0100000 - 0xc0529d5e (4263 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4008000 soft=f400a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3000.893 MHz processor
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6004.86 BogoMIPS (lpj=10002976)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003402] Security Framework initialized
[ 0.003416] AppArmor: AppArmor disabled by boot time parameter
[ 0.003418] Yama: becoming mindful.
[ 0.003442] Mount-cache hash table entries: 512
[ 0.003753] Initializing cgroup subsys memory
[ 0.003767] Initializing cgroup subsys devices
[ 0.003771] Initializing cgroup subsys freezer
[ 0.003774] Initializing cgroup subsys net_cls
[ 0.006675] Initializing cgroup subsys blkio
[ 0.006723] CPU: Physical Processor ID: 0
[ 0.006727] CPU: Processor Core ID: 0
[ 0.006731] mce: CPU supports 4 MCE banks
[ 0.006745] CPU0: Thermal monitoring enabled (TM1)
[ 0.006763] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
[ 0.006919] Freeing SMP alternatives memory: 20K (c0781000 - c0786000)
[ 0.008197] ACPI: Core revision 20130517
[ 0.012076] ACPI: All ACPI Tables successfully acquired
[ 0.013370] ftrace: allocating 19099 entries in 38 pages
[ 0.023450] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057502] smpboot: CPU0: Intel(R) Pentium(R) D CPU 3.00GHz (fam: 0f, model: 06, stepping: 02)
[ 0.059999] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.059999] ... version: 0
[ 0.059999] ... bit width: 40
[ 0.059999] ... generic registers: 18
[ 0.059999] ... value mask: 000000ffffffffff
[ 0.059999] ... max period: 0000007fffffffff
[ 0.059999] ... fixed-purpose events: 0
[ 0.059999] ... event mask: 000000000003ffff
[ 0.076727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083427] CPU 1 irqstacks, hard=f40ce000 soft=f40d8000
[ 0.006666] Initializing CPU#1
[ 0.083431] smpboot: Booting Node 0, Processors #1
[ 0.096604] Brought up 2 CPUs
[ 0.096610] smpboot: Total of 2 processors activated (12008.72 BogoMIPS)
[ 0.096819] devtmpfs: initialized
[ 0.096976] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[ 0.100507] RTC time: 20:09:02, date: 05/19/14
[ 0.100577] NET: Registered protocol family 16
[ 0.100840] ACPI: bus type PCI registered
[ 0.100846] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.100944] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.100950] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.100954] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.100956] PCI: Using MMCONFIG for extended config space
[ 0.100959] PCI: Using configuration type 1 for base access
[ 0.102090] bio: create slab <bio-0> at 0
[ 0.102090] ACPI: Added _OSI(Module Device)
[ 0.102090] ACPI: Added _OSI(Processor Device)
[ 0.102090] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.102090] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.103853] ACPI: EC: Look up EC in DSDT
[ 0.110158] ACPI: Interpreter enabled
[ 0.110189] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 0.110213] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.110217] ACPI: Using IOAPIC for interrupt routing
[ 0.110269] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.110379] ACPI: No dock devices found.
[ 0.118318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.118328] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.118332] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.118461] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.118466] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.118470] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.118474] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.118478] acpi PNP0A08:00: host bridge window [mem 0xcff00000-0xfebfffff] (ignored)
[ 0.118481] PCI: root bus 00: using default resources
[ 0.118486] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.118696] PCI host bridge to bus 0000:00
[ 0.118703] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.118707] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.118710] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.118725] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.118895] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.118957] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.119125] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.119148] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.119231] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.119317] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.119384] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.119433] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.119532] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.119597] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.119646] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.119745] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.119808] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.119857] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.119955] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.120030] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.120079] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.120178] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.120251] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.120273] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.120360] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.120440] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.120507] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.120640] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.120712] pci 0000:00:1f.0: [8086:27b0] type 00 class 0x060100
[ 0.120948] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.120966] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.120978] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.120990] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.121002] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.121014] pci 0000:00:1f.1: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.121164] pci 0000:00:1f.2: [8086:27c3] type 00 class 0x010400
[ 0.121185] pci 0000:00:1f.2: reg 0x10: [io 0xfa00-0xfa07]
[ 0.121196] pci 0000:00:1f.2: reg 0x14: [io 0xf900-0xf903]
[ 0.121206] pci 0000:00:1f.2: reg 0x18: [io 0xf800-0xf807]
[ 0.121217] pci 0000:00:1f.2: reg 0x1c: [io 0xf700-0xf703]
[ 0.121228] pci 0000:00:1f.2: reg 0x20: [io 0xf600-0xf60f]
[ 0.121238] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffe000-0xfdffe3ff]
[ 0.121284] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121418] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.121478] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.121706] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[ 0.121722] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.121737] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.121752] pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
[ 0.121762] pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f]
[ 0.121773] pci 0000:01:00.0: reg 0x30: [mem 0xfcf00000-0xfcf7ffff pref]
[ 0.121887] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.121903] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
[ 0.126691] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.126697] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.126703] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.126709] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.126783] pci 0000:02:01.0: [1106:3044] type 00 class 0x0c0010
[ 0.126806] pci 0000:02:01.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
[ 0.126819] pci 0000:02:01.0: reg 0x14: [io 0xef00-0xef7f]
[ 0.126902] pci 0000:02:01.0: supports D2
[ 0.126905] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
[ 0.126989] pci 0000:02:05.0: [10ec:8169] type 00 class 0x020000
[ 0.127012] pci 0000:02:05.0: reg 0x10: [io 0xec00-0xecff]
[ 0.127025] pci 0000:02:05.0: reg 0x14: [mem 0xfdefe000-0xfdefe0ff]
[ 0.127075] pci 0000:02:05.0: reg 0x30: [mem 0xfdec0000-0xfdedffff pref]
[ 0.127109] pci 0000:02:05.0: supports D1 D2
[ 0.127113] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.127196] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
[ 0.127218] pci 0000:02:08.0: reg 0x10: [mem 0xfdefd000-0xfdefdfff]
[ 0.127230] pci 0000:02:08.0: reg 0x14: [io 0xee00-0xee3f]
[ 0.127308] pci 0000:02:08.0: supports D1 D2
[ 0.127311] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.127410] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.127417] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.127423] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.127431] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.127435] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.127448] pci_bus 0000:00: on NUMA node 0
[ 0.128183] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.128303] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.128422] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.128542] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.128661] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.128780] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.128900] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.129019] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.129353] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.129366] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.129414] Found 1 acpi root devices
[ 0.129499] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.129499] vgaarb: loaded
[ 0.129499] vgaarb: bridge control possible 0000:01:00.0
[ 0.129499] PCI: Using ACPI for IRQ routing
[ 0.131455] PCI: pci_cache_line_size set to 64 bytes
[ 0.131514] e820: reserve RAM buffer [mem 0x00098800-0x0009ffff]
[ 0.131517] e820: reserve RAM buffer [mem 0xcfedf800-0xcfffffff]
[ 0.131681] NetLabel: Initializing
[ 0.131684] NetLabel: domain hash size = 128
[ 0.131686] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.131709] NetLabel: unlabeled traffic allowed by default
[ 0.131784] Switched to clocksource refined-jiffies
[ 0.141221] pnp: PnP ACPI init
[ 0.141249] ACPI: bus type PNP registered
[ 0.141516] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.141521] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.141526] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.141533] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.141554] pnp 00:01: [dma 4]
[ 0.141597] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.141664] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.141714] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.141773] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.142316] pnp 00:05: [dma 3]
[ 0.142386] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.142549] system 00:06: [io 0x0400-0x04bf] has been reserved
[ 0.142556] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.142624] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.143002] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.143009] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.143327] system 00:09: [mem 0x000d4800-0x000d7fff] has been reserved
[ 0.143339] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.143344] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.143349] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.143353] system 00:09: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.143357] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.143361] system 00:09: [mem 0x00100000-0xcfedffff] could not be reserved
[ 0.143365] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.143370] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.143374] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.143378] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.143382] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[ 0.143387] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.143401] pnp: PnP ACPI: found 10 devices
[ 0.143404] ACPI: bus type PNP unregistered
[ 0.181586] Switched to clocksource acpi_pm
[ 0.181620] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.181626] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.181632] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.181637] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.181644] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.181649] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.181655] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.181797] pci 0000:00:1e.0: setting latency timer to 64
[ 0.181804] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.181808] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.181812] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.181815] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.181819] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
[ 0.181823] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.181826] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.181830] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.181833] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.181886] NET: Registered protocol family 2
[ 0.182168] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.182210] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.182250] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.182288] TCP: reno registered
[ 0.182293] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.182304] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.182388] NET: Registered protocol family 1
[ 0.182388] pci 0000:01:00.0: Boot video device
[ 0.182388] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.182388] PCI: CLS 32 bytes, default 64
[ 0.182388] Unpacking initramfs...
[ 3.767636] Freeing initrd memory: 17220K (f672d000 - f77fe000)
[ 3.767832] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 3.767836] apm: disabled - APM is not SMP safe.
[ 3.767883] Scanning for low memory corruption every 60 seconds
[ 3.768350] audit: initializing netlink socket (disabled)
[ 3.768369] type=2000 audit(1400530145.763:1): initialized
[ 3.783776] bounce pool size: 64 pages
[ 3.783794] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.786252] zbud: loaded
[ 3.786379] VFS: Disk quotas dquot_6.5.2
[ 3.786456] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.786770] msgmni has been set to 1692
[ 3.787189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.787246] io scheduler noop registered
[ 3.787250] io scheduler deadline registered
[ 3.787303] io scheduler cfq registered (default)
[ 3.787440] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.787553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.787585] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.787808] GHES: HEST is not enabled!
[ 3.787828] isapnp: Scanning for PnP cards...
[ 4.143916] isapnp: No Plug & Play device found
[ 4.144002] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 4.144834] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.393708] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.393902] mousedev: PS/2 mouse device common for all mice
[ 4.394026] rtc_cmos 00:02: RTC can wake from S4
[ 4.394188] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 4.394220] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[ 4.394271] cpuidle: using governor ladder
[ 4.394275] cpuidle: using governor menu
[ 4.394354] drop_monitor: Initializing network drop monitor service
[ 4.394463] TCP: cubic registered
[ 4.394689] NET: Registered protocol family 10
[ 4.394926] NET: Registered protocol family 17
[ 4.394941] Key type dns_resolver registered
[ 4.395148] Using IPI No-Shortcut mode
[ 4.395277] PM: Hibernation image not present or could not be loaded.
[ 4.395295] registered taskstats version 1
[ 4.395849] Magic number: 14:160:195
[ 4.395919] rtc_cmos 00:02: setting system clock to 2014-05-19 20:09:06 UTC (1400530146)
[ 4.396373] Freeing unused kernel memory: 608K (c06e9000 - c0781000)
[ 4.396483] Write protecting the kernel text: 4264k
[ 4.396526] Write protecting the kernel read-only data: 1360k
[ 4.409586] systemd-udevd[47]: starting version 208
[ 4.441220] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 4.441231] ACPI: Power Button [PWRB]
[ 4.441342] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.441349] ACPI: Power Button [PWRF]
[ 4.453112] Linux agpgart interface v0.103
[ 4.456375] [drm] Initialized drm 1.1.0 20060810
[ 4.458668] wmi: Mapper loaded
[ 4.464289] ACPI: bus type USB registered
[ 4.464341] usbcore: registered new interface driver usbfs
[ 4.464366] usbcore: registered new interface driver hub
[ 4.465442] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.465645] r8169 0000:02:05.0 (unregistered net_device): not PCI Express
[ 4.466029] r8169 0000:02:05.0 eth0: RTL8110s at 0xf850e000, 00:1e:2a:c2:08:13, XID 04000000 IRQ 17
[ 4.466034] r8169 0000:02:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 4.466473] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 4.466476] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.468849] SCSI subsystem initialized
[ 4.470129] usbcore: registered new device driver usb
[ 4.472537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.472967] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.473145] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.473151] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.473162] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 4.473215] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 4.474467] hub 1-0:1.0: USB hub found
[ 4.474476] hub 1-0:1.0: 2 ports detected
[ 4.476265] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.476273] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.476283] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 4.476285] ehci-pci: EHCI PCI platform driver
[ 4.476334] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 4.477340] ACPI: bus type ATA registered
[ 4.478267] hub 2-0:1.0: USB hub found
[ 4.478276] hub 2-0:1.0: 2 ports detected
[ 4.478975] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 4.479324] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.479335] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 4.483257] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 4.483270] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 4.483319] libata version 3.00 loaded.
[ 4.490116] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.490318] hub 3-0:1.0: USB hub found
[ 4.490328] hub 3-0:1.0: 8 ports detected
[ 4.497666] e100 0000:02:08.0 eth1: addr 0xfdefd000, irq 20, MAC addr 00:17:31:0e:7b:1b
[ 4.498311] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280a2
[ 4.498316] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 4.498320] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 4.499944] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 4.513467] hub 1-0:1.0: USB hub found
[ 4.513476] hub 1-0:1.0: 2 ports detected
[ 4.536751] hub 2-0:1.0: USB hub found
[ 4.536759] hub 2-0:1.0: 2 ports detected
[ 4.537041] ata_piix 0000:00:1f.1: version 2.13
[ 4.537215] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.538319] scsi0 : ata_piix
[ 4.539121] scsi1 : ata_piix
[ 4.539242] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 4.539246] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 4.539349] ahci 0000:00:1f.2: version 3.0
[ 4.539518] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 4.539607] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 4.539612] ahci 0000:00:1f.2: flags: 64bit ncq led clo
[ 4.539618] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.540696] scsi2 : ahci
[ 4.540853] scsi3 : ahci
[ 4.540977] scsi4 : ahci
[ 4.541096] scsi5 : ahci
[ 4.541226] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 41
[ 4.541231] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 41
[ 4.541235] ata5: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 41
[ 4.541239] ata6: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 41
[ 4.541389] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.541395] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.541406] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 4.541450] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 4.541676] hub 4-0:1.0: USB hub found
[ 4.541683] hub 4-0:1.0: 2 ports detected
[ 4.541931] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.541937] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.541946] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 4.541985] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 4.542120] ata2: port disabled--ignoring
[ 4.542317] hub 5-0:1.0: USB hub found
[ 4.542325] hub 5-0:1.0: 2 ports detected
[ 4.563395] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 4.574546] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 4.574552] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 4.574662] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 4.574667] nouveau [ VBIOS][0000:01:00.0] version 70.18.36.00.00
[ 4.575237] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 4.575243] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 4.575247] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 4.713759] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H652L, 0803, max UDMA/33
[ 4.743671] ata1.00: configured for UDMA/33
[ 4.744629] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H652L 0803 PQ: 0 ANSI: 5
[ 4.770051] tsc: Refined TSC clocksource calibration: 3000.853 MHz
[ 4.860047] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.020046] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.020077] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.021034] ata5.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
[ 5.021039] ata5.00: 156301488 sectors, multi 0: LBA
[ 5.021915] ata5.00: configured for UDMA/100
[ 5.023691] ata4.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
[ 5.023695] ata4.00: 156301488 sectors, multi 0: LBA
[ 5.024602] ata4.00: configured for UDMA/100
[ 5.024731] scsi 3:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
[ 5.025019] scsi 4:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
[ 5.063459] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800009e9dd1, S400
[ 5.090025] usb 1-1: new low-speed USB device number 2 using uhci_hcd
[ 5.180043] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.184039] ata6.00: ATA-6: ST380011A, 3.04, max UDMA/100
[ 5.184044] ata6.00: 156301488 sectors, multi 0: LBA48
[ 5.188337] ata6.00: configured for UDMA/100
[ 5.188461] scsi 5:0:0:0: Direct-Access ATA ST380011A 3.04 PQ: 0 ANSI: 5
[ 5.199621] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.199627] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.199923] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 5.200185] sd 3:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 5.200346] sd 3:0:0:0: [sda] Write Protect is off
[ 5.200351] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.200393] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.200900] sd 4:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 5.200997] sd 4:0:0:0: [sdb] Write Protect is off
[ 5.201002] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.201043] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.201527] sd 5:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 5.201623] sd 5:0:0:0: [sdc] Write Protect is off
[ 5.201627] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.201669] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.207456] sdc: sdc1
[ 5.207886] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 5.235174] sda: sda1 sda2 < sda5 >
[ 5.235744] sd 3:0:0:0: [sda] Attached SCSI disk
[ 5.237596] sdb: sdb1 sdb2 < sdb5 >
[ 5.238117] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 5.260907] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.277654] usbcore: registered new interface driver usbhid
[ 5.277659] usbhid: USB HID core driver
[ 5.280199] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input2
[ 5.280357] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 5.770105] Switched to clocksource tsc
[ 6.481687] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 6.481702] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 6.481708] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 6.481900] [TTM] Zone kernel: Available graphics memory: 433706 kiB
[ 6.481904] [TTM] Zone highmem: Available graphics memory: 1682412 kiB
[ 6.481907] [TTM] Initializing pool allocator
[ 6.481924] nouveau [ DRM] VRAM: 512 MiB
[ 6.481927] nouveau [ DRM] GART: 1048576 MiB
[ 6.481933] nouveau [ DRM] TMDS table version 2.0
[ 6.481936] nouveau [ DRM] DCB version 4.0
[ 6.481940] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 6.481944] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 6.481948] nouveau [ DRM] DCB outp 03: 02011362 00020010
[ 6.481951] nouveau [ DRM] DCB outp 04: 01022310 00000000
[ 6.481954] nouveau [ DRM] DCB conn 00: 00001030
[ 6.481959] nouveau [ DRM] DCB conn 01: 00202161
[ 6.481964] nouveau [ DRM] DCB conn 02: 00000200
[ 6.505501] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.505505] [drm] No driver support for vblank timestamp query.
[ 6.505631] nouveau [ DRM] 2 available performance level(s)
[ 6.505637] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 405MHz voltage 900mV
[ 6.505642] nouveau [ DRM] 3: core 589MHz shader 1402MHz memory 405MHz voltage 1000mV
[ 6.505646] nouveau [ DRM] c: core 405MHz shader 810MHz memory 405MHz voltage 900mV
[ 6.531333] nouveau [ DRM] MM: using COPY for buffer copies
[ 6.581567] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo f7015a00
[ 6.581724] fbcon: nouveaufb (fb0) is primary device
[ 6.653923] Console: switching to colour frame buffer device 160x64
[ 6.655952] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 6.655955] nouveau 0000:01:00.0: registered panic notifier
[ 6.655962] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 7.082698] ISO 9660 Extensions: RRIP_1991A
[ 7.168774] loop: module loaded
[ 8.253583] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 8.355925] device-mapper: uevent: version 1.0.3
[ 8.356608] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
[ 8.362693] bio: create slab <bio-1> at 1
[ 8.386733] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
[ 10.338096] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 10.417677] systemd[1]: Set hostname to <archiso>.
[ 10.724871] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 10.724981] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.725005] systemd[1]: Starting Remote File Systems.
[ 10.725151] systemd[1]: Reached target Remote File Systems.
[ 10.725172] systemd[1]: Starting LVM2 metadata daemon socket.
[ 10.725323] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 10.725343] systemd[1]: Starting Delayed Shutdown Socket.
[ 10.725469] systemd[1]: Listening on Delayed Shutdown Socket.
[ 10.725488] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 10.725627] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 10.725646] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 10.725770] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 10.725790] systemd[1]: Starting Root Slice.
[ 10.726156] systemd[1]: Created slice Root Slice.
[ 10.726176] systemd[1]: Starting User and Session Slice.
[ 10.726413] systemd[1]: Created slice User and Session Slice.
[ 10.726434] systemd[1]: Starting System Slice.
[ 10.726647] systemd[1]: Created slice System Slice.
[ 10.726682] systemd[1]: Starting system-getty.slice.
[ 10.726921] systemd[1]: Created slice system-getty.slice.
[ 10.726941] systemd[1]: Starting Slices.
[ 10.727040] systemd[1]: Reached target Slices.
[ 10.727064] systemd[1]: Starting Journal Socket.
[ 10.727235] systemd[1]: Listening on Journal Socket.
[ 10.727662] systemd[1]: Starting Load Kernel Modules...
[ 10.728292] systemd[1]: Mounting POSIX Message Queue File System...
[ 10.880863] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 10.881454] systemd[1]: Starting Journal Service...
[ 10.882180] systemd[1]: Started Journal Service.
[ 11.716066] systemd-journald[149]: Vacuuming done, freed 0 bytes
[ 11.916159] FS-Cache: Loaded
[ 12.202893] RPC: Registered named UNIX socket transport module.
[ 12.202899] RPC: Registered udp transport module.
[ 12.202902] RPC: Registered tcp transport module.
[ 12.202904] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.619444] FS-Cache: Netfs 'nfs' registered for caching
[ 12.812715] systemd-udevd[181]: starting version 208
[ 12.905896] systemd-journald[149]: Received request to flush runtime journal from PID 1
[ 15.580133] thermal LNXTHERM:00: registered as thermal_zone0
[ 15.580139] ACPI: Thermal Zone [THRM] (40 C)
[ 15.915160] ACPI: Fan [FAN] (on)
[ 16.002108] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM2S 1 (20130517/utaddress-251)
[ 16.002119] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM1K 2 (20130517/utaddress-251)
[ 16.002126] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \GPE1 3 (20130517/utaddress-251)
[ 16.002133] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.002139] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPO2 1 (20130517/utaddress-251)
[ 16.002145] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.002148] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPIV 1 (20130517/utaddress-251)
[ 16.002153] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPO_ 2 (20130517/utaddress-251)
[ 16.002158] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \PALD 3 (20130517/utaddress-251)
[ 16.002164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.002166] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 16.342474] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.403348] leds_ss4200: no LED devices found
[ 16.664449] parport_pc 00:05: reported by Plug and Play ACPI
[ 16.664509] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 16.686843] systemd-udevd[203]: renamed network interface eth0 to enp2s5
[ 16.770163] systemd-udevd[209]: renamed network interface eth1 to enp2s8
[ 17.098798] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 17.779883] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 17.780620] ppdev: user-space parallel port driver
[ 17.849790] microcode: CPU0 sig=0xf62, pf=0x4, revision=0xf
[ 17.944384] iTCO_vendor_support: vendor-support=0
[ 17.946278] microcode: CPU1 sig=0xf62, pf=0x4, revision=0xf
[ 17.947486] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 17.950629] r8169 0000:02:05.0 enp2s5: link down
[ 17.950649] r8169 0000:02:05.0 enp2s5: link down
[ 17.950666] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
[ 17.965112] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 18.405080] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 18.405126] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460)
[ 18.405284] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.872915] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 19.433622] hda_codec: ALC882: SKU not ready 0x411111f0
[ 19.445025] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 19.479013] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 19.479156] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 19.479804] hda_intel: Disabling MSI
[ 19.479816] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 20.178014] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 20.178270] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 20.178485] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 20.178696] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[44490.433683] md: bind<sda1>
[44490.446722] md: bind<sdb1>
[44490.449241] md: raid1 personality registered for level 1
[44490.450198] md/raid1:md1: not clean -- starting background reconstruction
[44490.450203] md/raid1:md1: active with 2 out of 2 mirrors
[44490.450235] md1: detected capacity change from 0 to 75934400512
[44490.452050] md: resync of RAID array md1
[44490.452056] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[44490.452059] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[44490.452064] md: using 128k window, over a total of 74154688k.
[44490.454641] md1: unknown partition table
[45968.754029] md: md1: resync done.
[45968.841250] RAID1 conf printout:
[45968.841254] --- wd:2 rd:2
[45968.841258] disk 0, wo:0, o:1, dev:sda1
[45968.841261] disk 1, wo:0, o:1, dev:sdb1
[47642.847783] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
[47687.134362] r8169 0000:02:05.0 enp2s5: link up
[47687.134376] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s5: link becomes ready
[47825.775238] usb 3-6: new high-speed USB device number 3 using ehci-pci
[47825.899362] usb 3-6: unable to get BOS descriptor set
[47826.017245] usb-storage 3-6:1.0: USB Mass Storage device detected
[47826.017363] scsi6 : usb-storage 3-6:1.0
[47826.017504] usbcore: registered new interface driver usb-storage
[47827.081919] scsi 6:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
[47827.802316] sd 6:0:0:0: [sdd] 15466496 512-byte logical blocks: (7.91 GB/7.37 GiB)
[47827.804809] sd 6:0:0:0: [sdd] Write Protect is off
[47827.804814] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
[47827.807314] sd 6:0:0:0: [sdd] No Caching mode page found
[47827.807763] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[47827.816453] sd 6:0:0:0: [sdd] No Caching mode page found
[47827.816915] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[47827.845089] sdd: sdd1
[47827.851818] sd 6:0:0:0: [sdd] No Caching mode page found
[47827.852305] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[47827.852776] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[47901.177187] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[48255.001967] usb 3-6: USB disconnect, device number 3
[48456.278507] usb 3-6: new high-speed USB device number 4 using ehci-pci
[48456.402614] usb 3-6: unable to get BOS descriptor set
[48456.425683] usb-storage 3-6:1.0: USB Mass Storage device detected
[48456.425763] scsi7 : usb-storage 3-6:1.0
[48457.491544] scsi 7:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
[48458.209938] sd 7:0:0:0: [sdd] 15466496 512-byte logical blocks: (7.91 GB/7.37 GiB)
[48458.212437] sd 7:0:0:0: [sdd] Write Protect is off
[48458.212442] sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00
[48458.214932] sd 7:0:0:0: [sdd] No Caching mode page found
[48458.215426] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[48458.224684] sd 7:0:0:0: [sdd] No Caching mode page found
[48458.225143] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[48458.253332] sdd: sdd1
[48458.265813] sd 7:0:0:0: [sdd] No Caching mode page found
[48458.266295] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[48458.266755] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[48470.450341] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[50093.387926] Adding 3930408k swap on /dev/sda5. Priority:-1 extents:1 across:3930408k FS
[50096.410969] Adding 3930408k swap on /dev/sdb5. Priority:-2 extents:1 across:3930408k FS
[54374.314336] ata4.00: exception Emask 0x50 SAct 0x0 SErr 0x480900 action 0x6 frozen
[54374.314836] ata4.00: irq_stat 0x08000000, interface fatal error
[54374.315323] ata4: SError: { UnrecovData HostInt 10B8B Handshk }
[54374.315764] ata4.00: failed command: WRITE DMA
[54374.316198] ata4.00: cmd ca/00:88:9f:ca:8d/00:00:00:00:00/e8 tag 0 dma 69632 out
res 50/00:00:9e:ca:8d/00:00:9e:c9:8d/e8 Emask 0x50 (ATA bus error)
[54374.317334] ata4.00: status: { DRDY }
[54374.318002] ata4: hard resetting link
[54374.904585] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[54374.906314] ata4.00: configured for UDMA/100
[54374.906332] ata4: EH complete
[56161.610355] sdd: detected capacity change from 7918845952 to 0
[56178.066775] usb 3-6: USB disconnect, device number 4
[56193.205154] ata6: exception Emask 0x50 SAct 0x0 SErr 0x90800 action 0xe frozen
[56193.205703] ata6: irq_stat 0x00400000, PHY RDY changed
[56193.206232] ata6: SError: { HostInt PHYRdyChg 10B8B }
[56193.206732] ata6: hard resetting link
[56193.924403] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[56193.932798] ata6.00: configured for UDMA/100
[56193.932805] ata6: EH complete
[56195.044927] ata6: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
[56195.045472] ata6: irq_stat 0x00400000, PHY RDY changed
[56195.046003] ata6: SError: { PHYRdyChg 10B8B }
[56195.046511] ata6: hard resetting link
[56195.764407] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[56195.772826] ata6.00: configured for UDMA/100
[56195.772832] ata6: EH complete
[56217.331067] usb 3-6: new high-speed USB device number 5 using ehci-pci
[56217.455149] usb 3-6: unable to get BOS descriptor set
[56217.478526] usb-storage 3-6:1.0: USB Mass Storage device detected
[56217.478662] scsi8 : usb-storage 3-6:1.0
[56218.544212] scsi 8:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
[56219.262349] sd 8:0:0:0: [sdd] 15466496 512-byte logical blocks: (7.91 GB/7.37 GiB)
[56219.264849] sd 8:0:0:0: [sdd] Write Protect is off
[56219.264855] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
[56219.267343] sd 8:0:0:0: [sdd] No Caching mode page found
[56219.267939] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[56219.277220] sd 8:0:0:0: [sdd] No Caching mode page found
[56219.277802] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[56219.305984] sdd: sdd1
[56219.318099] sd 8:0:0:0: [sdd] No Caching mode page found
[56219.318677] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[56219.319238] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[56234.556099] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Edit: Just after I took out my flashdrive, when I accidentally bumped one of the HDs, this popped up:
[56193.205154] ata6: exception Emask 0x50 SAct 0x0 SErr 0x90800 action 0xe frozen
[56193.205703] ata6: irq_stat 0x00400000, PHY RDY changed
[56193.206232] ata6: SError: { HostInt PHYRdyChg 10B8B }
[56193.206732] ata6: hard resetting link
[56193.924403] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[56193.932798] ata6.00: configured for UDMA/100
[56193.932805] ata6: EH complete
[56195.044927] ata6: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
[56195.045472] ata6: irq_stat 0x00400000, PHY RDY changed
[56195.046003] ata6: SError: { PHYRdyChg 10B8B }
[56195.046511] ata6: hard resetting link
Last edited by Dornith (2014-05-20 16:08:40)http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent -
MBA 11 (2013) pinch zoom does not work after some time, how to fix it ?
Recently I purchased MBA 11 (2013) model ( 4GB ram & 1.3 Ghz dual core). Although I use iPhone 5 & iPad 4 but never used mac. So when I found the track pad is capable of pinch zoom(along with other gesture) I was excited. But later I found after opening few apps (like safari, chrome etc) pinch zoom stop working . I need to restart in order to make it work again. Other gestures works fine just issue with the pinch zoom. Along with this issue I have some other questions as well
1) How to fix this pinch zoom issue?
2) I use eclipse for android development, but when I connect android phone/tablet - os crashes, no idea why?
3) How to uninstall & update apps properly which was downloaded from web (like I installed x-code) ?
4) I want to use mouse (i am comfortable) - I need to know whether right click, wheel, ling click & drag works perfectly.
5) How to back up the os if something goes wrong I can retrieve from there ?Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
http://support.apple.com/kb/TS3694#error6
Maybe you are looking for
-
Can we have a Hierarchy in the Prompt of webi? promot as key-text?
Hello all, Can we have a Hierarchy in the Prompt of webi? We are using Fund Center hierarchy and the user wants to select the top node to get all the nodes under it in hierarchies? Also along same lines can we display the Long text and Key ofthe FUnd
-
Gmail and IMAP mail accounts no longer work in the mail app since iOS 6
I'm getting the User information or password is incorrect message. Or it takes 10+ minutes to send a message. It will no longer allow me to sync with my IMAP mail account from work. Everything worked correctly, then iOS 6 is released and it's hose
-
Regarding opening a new pop up window
In order to open open in a new window I have used the following two approaches 1.public void FormHelpUrl(ActionEvent actionEvent) throws Exception { FacesContext context = FacesContext.getCurrentInstance(); ExternalContext ectx = context.getExternalC
-
Am i allowed to upload a slideshow made in iPhoto to Facebook? It has no music
Am i allowed to upload a slideshow created in iphoto onto Facebook? I have not used any music
-
Install blue status bar went gray, but all is OK...
So I finally got around to biting the bullet and I installed iTunes 8.0.2 on our MBP (still haven't done it on the G4 which has all our music in the Library.) During installation, I watched the blue status bar (I don't know its real name - that liqui