Fixed Loop Component didn't work with Variables

Hi All,
I am developing a classic planning application using EPM 11.1.2.2
I am writing a business rule in which i need to iterate "N" times. The value of this "N" is always stored in an execution variable.
The business rule work absolutely fine if i provide some static value in the "Value" field of fixed loop.
In case if i provided execution variable in "Value" field of fixed loop the loop didn't iterate. However the rule validated and deployed successfully.
Please note i am developing my business rules using EPM Calculation Manager.
Following Code Works
{index} = 10;
LOOP (10)
Following Code Didn't Work
{index} = 10;
LOOP ({index})

AlpBurak already explained it for you. I'm a big fan of loop (and Alp) so just adding to what Alp said.
You can add a higher number in loop and come out of it by setting a break (1, if you are using a variable then set the variable value to 1)
Oracle Essbase Technical Reference
Regards
Celvin
http://www.orahyplabs.com

Similar Messages

KMC didn´t work with pcd write-protect mode

Hello,
I have activated the write-protect mode for the PCD in our Portal. Everything is working fine.
After restarting the portal-server, the kmc-component didn´t work anymore. After disabling the write-protect mode and restarting the server, kmc works again.
I read a sap-note (1148777), that this problem was fixed with SPS 15 KMC-Patch 1. Our portal is on SPS 15 with latest patch-releases.
Any idea ?
Thx for your reply!
Oliver

The concurrent mark sweep collector you get with -Xincgc isn't a compacting collector. It doesn't move objects. So while it can grow the heap if needed, it can't give those pages back to the operating system, as you want by turning -XX:MaxHeapFreeRatio= down that far.

What HDMI to Component converter will work with the current generation Apple TV3?

What HDMI to Component converter will work with the current generation Apple TV3?

http://www.hdfury.com/products/hdfuryiii-specs/

[svn:fx-trunk] 5802: Fix ant asdoc target to work with the new manifest files.

Revision: 5802
Author: [email protected]
Date: 2009-03-31 09:14:44 -0700 (Tue, 31 Mar 2009)
Log Message:
Fix ant asdoc target to work with the new manifest files.
QE Notes: None.
Doc Notes: None.
tests: checkintests
Modified Paths:
flex/sdk/trunk/asdoc/build.xml

Thats good news.

This Built-in didn't work with me ....... why?

this Built-in didn't work with me ....... why?
show_view
and
hide_view
is suppose to add anything for them until they work?

Check the 'raise on entry' property of your canvases, and 'hide on exit' property of the windows they're in. If your current item is on a canvas with Raise on Entry = Yes, for instance, trying to show another view on top of it without navigating to an item on that canvas won't have any effect.

When i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

when i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do

Hello,
Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?
Thanks!

You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
eMac Mac OS X (10.3.8)

My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility. I've contacted Acura RDX 2013 about this problem. It referred me Apple for a fix. My iPhone 4 worked with the car technology.

My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility. I've contacted Acura RDX 2013 about this problem. It referred me Apple for a fix. My iPhone 4 worked with the car technology. Is there a fix for the iPhone 5 to allow call pickup via the Acura?
Thanks

HI Friend,
Probably the problem it is because your iPhone 4 and your car have the same Bluetooth technology ( 2.1 ), but iPhone 5 has new Bluetooth technology ( 4.0 ).
http://www.apple.com/iphone/compare-iphones/

Itunes stops working and wont play purchased tv shows, i tried the quicktime unchecking box fix and that didn't work. help

im new here trying to get help. my itunes stops working when trying to play tv shows and movies. i tried the quick time fix, unchecking a tab in the advanced section that didn't work for me. i have now uninstalled itunes that didn't work either. help

Try this. It worked for a few users after a drop.
Turn the iPad over and give it a very HARD slap on the back. May take several slaps.
 Cheers, Tom

PS CS5 - Working with Variables | The Complete Picture with Julieanne Kost | Adobe TV

In this episode of The Complete Picture, Julieanne demonstrates the incredible power of Variables in Photoshop. Learn how to cut hours of time out of your production time when you need to combine text and photographs. Although this feature has been in Photoshop for many releases, only a small number of customers know if it’s immense power for tasks such as automating event photography, creating web banners and graphics.
http://adobe.ly/A1tzfO

Struggling with my .png's in variables. They are sizing up against the previous dataset and shrink. By the 5th or 6th in my set of datasets, I'm working with a tiny version - very lo-res. Jpg's are no problem as are .png's that are a set size (i.e. 4x5). Only my cutout PNG's with transparency around them are an issue. Thoughts on how to keep the size from shrinking?
thank you

How can i work with variables of the BEx-Query in WAD ???

Hi Experts !
In my Web Template i want to work with the value of a BEx-Variable like this :
</td>
<td class="SAPBEXTbsTab" id="head_TAB4"><A href="javascript:if (V_TEST != '1') {goto_tab('TAB4')}">Summenblatt 3</A>
</td>
V_TEST is a variable in my BEx-Query. Does someone know how i can get the value from this variable ???
Thx Andreas

to get the query variable value into javascript variable you can do like below
<script>
var period_val = '<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TEXTELEMENTS_PERIOD"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEXT_ELEMENTS"/>
         <param name="DATA_PROVIDER" value="DP"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="ELEMENT_TYPE_1" value="VARIABLE"/>
         <param name="ELEMENT_NAME_1" value="0P_FPER"/>
         <param name="ONLY_VALUES" value="X"/>
         ITEM:            TEXTELEMENTS_PERIOD
</object>';
</script>
Raja

Mpeg 2 playback component doesn't work with OS 10.9.5

What version of mpeg 2 playback component works with 10.9.5?

Hello wishzoom,
If you are running OS X 10.9.5 Mavericks on your Mac, you should not need the MPEG2 Playback Component, as noted in the following article:
OS X: Unable to install QuickTime MPEG2 Playback Component - Apple Support
Sincerely,
- Brenden

Seconds_between doesn't work with variables in SQLScript

There is a sample procedure:
create procedure testproc
language SQLSCRIPT
as
l_curtime timestamp;
l_timedelta integer;
begin
select systimestamp into l_curtime from dual;
select seconds_between(:l_curtime, systimestamp) into l_timedelta from dual;
end;
It should return seconds between 2 timestamp values.
The code returns an error:
Could not execute 'create procedure testproc language SQLSCRIPT as l_curtime timestamp; l_timedelta integer; begin ...'
SAP DBTech JDBC: (at 160): inconsistent datatype: line 8 col 10 (at pos 160)
With «time» and «date» datatypes that's the same. So, seconds_between doesn't work with SQLScript variable (in this example, l_curtime). Is it a normal behaviour or supposed to be a bug?

Hello,
I can confirm same behavior - using variable inside seconds_between function leads to error. If you put there static string it is ok.
Of course you can always create "dummy" table (having 1 row with 1 column) where you will store the result of first call and then you will reference in second. But of course it is not that clean and it will be slower (especially if called many times).
But I would suggest to wait few more days - there should be SP03 released and everything can be different.
Tomas

Skype didn't work with free trial, will it work if...

I tried a skype free trial once, it was like a dollar free, and couldn't call anyone. I'd like to use skype, specially since these days it seems there is way less delay. But i don't wanna buy service if its not gonna work for me. Last time i would call numbers but people wouldn't get the call, so i gave up. Could i get a free trial again? It's been awhile and i was using a different OS at the time so i'd like to try it again.

I didn't work for me as well. It's a shame. Skype offering something that doesn't work.
I paid the "free", tried to make a call to a cell phone in another country and...bang! 20 cents per minute.

Fixed Layout EPUB, Buttons dont work with Adobe Digital Editions

Hello Community,
I am working with InDesign CC 2014.1 and Adobe Digital Editions 4 (ADE).
I am developing a FXL epub. When viewing the exported epub with ADE the buttons don't work.
I also tried to view other epubs as the one mentioned in this thread: https://forums.adobe.com/thread/1684411
No animations work.
can someone help me with this problem?
Thanks in advance.
Stephan

ADE is not a very good FXL EPUB reader. Try iBooks, Readium for Chrome or Kobo.

Fixed Loop Component didn't work with Variables

Similar Messages

Maybe you are looking for