Fixed time interval selection in Infopackage

Hi Guys,
I have a generic data source from PA0315 table that I am using to supply master data 0EMPLOYEE. In the update tab of the infopackage it has a fixed time interval selection with Start Date and End Date. I enter 01.01.1900 to 31.12.9999 so that I can capture the entire data for every load.
But when ever I enter that selection option it always returns with '0' data. But if I enter specific date ranges it returns with data. But being specific does not help me b/c I want the entire date range.
Has anybody come across this before and have an idea on a solution to capture all the data.
Any response will be appreciated.
K.

Hi,
I'm facing a similar problem. I would really appreciate if anyone can help in this regard.
We have a table in R/3 which has time-dependent data. For example, for a single OBJID we could have multiple records with different BEGDA/ENDDA. When we try to load this data into BW InfoObject, we see a time-dependent data selection in update tab of infopackage. We need to select BEGDA/ENDDA since otherwise during loads we would get a "DUPLICATE RECORDS" load error in BW.
The problem is when we enter a Fixed-time interval Start Data and End Date in the InfoPackage, only the records with that StartDate and EndDate are loaded. Ideally I would want to see all the records whose BEGDA/ENDDA falls in the range of StartDate and EndDate.
I tried modifying the ROOSFIELD table for the data source. I made the BEGDA SELOPTS as GE(16) and ENNDA SELOPTS as LE(64). But still it doesn't seem to work. I tried the same in RSA3. Unless we give a range for BEGDA it doesn't seem to behave as expected. Could someone let me know how I can load all records to BW whose BEGDA/ENDDA fall in the range of StarteDate and EndDate.
Thanks,
Anil

Similar Messages

Time dependent data load to BW using Fixed Time Interval selection

Hi,
I'm facing a problem in extracting time-dependent master data to BW. I would really appreciate if anyone can help in this regard.
We have a table in R/3 which has time-dependent data. For example, for a single OBJID we could have multiple records with different BEGDA/ENDDA and different attributes. When we try to load this data into BW InfoObject, we see a time-dependent data selection in update tab of infopackage. We need to select BEGDA/ENDDA in datasource since otherwise during loads we would get a "DUPLICATE RECORDS" load error in BW.
The problem is when we enter a Fixed-time interval Start Data and End Date in the InfoPackage, only the records with that StartDate and EndDate are loaded. Ideally I would want to see all the records whose BEGDA/ENDDA falls in the range of StartDate and EndDate.
I tried modifying the ROOSFIELD table for the data source. I made the BEGDA SELOPTS as GE(16) and ENNDA SELOPTS as LE(64). But still it doesn't seem to work. I checked if the change to ROOSFIELD has any affect in RSA3. Unless we give a range for BEGDA it doesn't seem to behave as expected. Could someone let me know how I can load all records to BW whose BEGDA/ENDDA fall in the range of StarteDate and EndDate.
Thanks,
Anil.

Anil,
If you are using a custom dataSource, make sure the dataSource fields for begda and ennda are labeled "datefrom" and "dateto".
Cheers,
T-

Infopackage time dependant data fixed time interval

Hi,
I have issue with infopackage. When I tried to load the master data attribute itu2019s not loading the changed data.When I checked the infopackage it has update tab and in this time dependant data section,it was marked as fixed time interval.The changed data in R/3 actually falls under the interval what was entered in the fixed time interval period.But it was not extracted.
I found that if we enter the exact specific dates interval in the fixed time interval,it fetches data.But we canu2019t enter each dates interval for all changed data in R/3. It needs to fetch all the data.When I try to remove the fixed time interval,it is not allowing as it is mandatory field.
Please suggest me how to fetch all the records for time dependant data.I tried other options like routine and variables.But it doesnu2019t work and it is fetching data only if we enter the exact dates interval.
Regards,
Ramana

There is nothing to do with PL/SQL.
You can refer below links:
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96524/c12parti.htm
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10739/partiti.htm#i1006727

Read no. of pulse count with fixed time interval

Hi,
I am try to read no of pulse count ( Pulse period = 500ms, On time = 100msec and Off time = 400msec). Between pulses there is a fixed time interval of 2seconds. I am using NI USB DAQ 6341. Can anybody help me regarding this?

Thanks for replying. I have gone through that example, the given example are only increment count when pulese are detected.
In my case, i want to count the no. of pulses between the time interval of 2sec. e.g. Suppose my device generate 5 no. of pulses and after every 5 pulses their is 2sec time interval, here i need to read only 5 pulses not the continuous count. And no. of pulses are generated by device can be vary but the time interval between those pulses are fixed. Could you give me suggession regarding this?

Time interval selection in IP30

Hi, gurus!
We need to use IP30 transaction but indicating a time interval selection.
That is, the standard transaction allows to indicate an interval for call objects (for instance, 30 days), but we need to indicate a start and end of interval (for example, from 01.01.2011 to 15.01.2011).
Is there any way of doing this (field exit, ...)?
Thanks in advance.
Best regards,
J Madariaga

Hi,
It can be achieved by backgrounfd scheduling
sm36
check this for background scheduling details
Re: Deadline Monitoring
Regards,
Jitender

How to track EM usage pattern in a fixed time interval?

Hi, all.
I am trying to get an idea of how much EM our system is using at different time during the day in order to find out the EM usage pattern on the ECC6.0 system. From ST02, I only see the current usage and max usage. But there is no history on the EM usage. I checked st03 and came up empty too. Would you know if there is any other way to do that? I guess we can write a custom abap to do it and schedule the job in sm37. But it is probably because I don't know better.
Please advise.
Thanks,
Jonathan.
Edited by: Jonathan Ma on Jun 24, 2010 5:19 PM

Anyone, please?

Fatch data from a table after a given time interval

Hello
I want to fetch date from a table after a fixed time interval is there any
way to do it.
thanks

Not sure what you want. But maybe this helps.
SELECT date+interval FROM atable;
Also if you tell us more about the business case the answers could be more to the point.

How can I fix the long delay (15 min ) between the time I select a song to the time it begins playing?

How can I fix the lond delay (15 min.) between the time I select a song to the time it begins playing?

Hi Ben,
This is a common issue that NI LabVIEW does not address.
The good news is that OpenG provides a function to do just what you need.
See this article: Resize Front Panel to largest decoration
The way to get the OpenG functions is to use the JKI VI Package Manager (VIPM).
In addition to the OpenG functions there are several other community provided tools avaliable through VIPM.
For a quick test, I'm attaching these files (LV version 2010 sp1):
Fit VI window to Largest Dec__ogtk.vi and the required sub vi Current VIs Parents Ref__ogtk.vi.
You should really use VIPM to get the full OpenG library - there are many gems in there.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.
Attachments:
Fit VI window to Largest Dec__ogtk.vi ‏29 KB
Current VIs Parents Ref__ogtk.vi ‏9 KB

[svn:osmf:] 11045: Increasing timer interval in attempt to fix unit test on the build server.

Revision: 11045
Author:   [email protected]
Date:     2009-10-21 02:32:45 -0700 (Wed, 21 Oct 2009)
Log Message:
Increasing timer interval in attempt to fix unit test on the build server.
Modified Paths:
    osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/composition/TestParallelViewableTrai t.as

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Fixed length time interval variable

Hello experts,
I would like to define a time interval variable between a start date (entered by the user) and end date which is exactly 12 periods after the start date (the system somehow calculates the end date = start date + 12).
The same principle should be used for different periods such as day, week, month. For instance for a calendar day variable it should calculate the end date = start date + 12 days, for a calendar week start date = start date + 12 weeks etc.
How such behaviour with a variable could be achieved ?
Thanks in advance
Rado

Hi,
Just create a variable ZCDATE of user exit type and code in the exit ZXRSRU01 to populate it.
DATA: ZE_T_RANGE TYPE RSR_T_RANGESID WITH HEADER LINE.
Current date
    when 'ZCDATE'. " Your Variable
      IF I_STEP = 2.
        ZE_T_RANGE-SIGN    = 'I'.
        ZE_T_RANGE-OPT     = 'EQ'.
        ZE_T_RANGE-LOW     = SY-DATUM.
        APPEND ZE_T_RANGE TO E_T_RANGE.
        clear ZE_T_RANGE.
      ENDIF.
Thanks,
Debasish

ABAP Code Date Selection for InfoPackage Scheduler

Hello Group
I need to automate the selection of valid condition records for an extraction that have a From and To date range.
I noticed there is an option (Routine for time interval) to write ABAP code along with a template that is available in the InfoPackage.
I think the logic for the selection would be any record
Valid from       <= today
Valid to           >= today
Can anyone help with the ABAP code?
The template is as follows:
program conversion_routine.
Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rsldpsel.
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA:   ...
$$ end of global - insert your declaration only before this line   -
form compute_time_dependent_dates
changing p_datefrom type d
           p_dateto   type d
           p_subrc like sy-subrc.
      Insert source code to current selection field
$$ begin of routine - insert your code only below this line        -
          p_datefrom =
          p_dateto   =
          p_subrc = 0.
$$ end of routine - insert your code only before this line         -
endform.
Thank You for your help!!
Frank

I resolved the problem . I have changed the order of read table l_t_range because I need the header .
In the loop at datos I add the line l_t_range-iobjnm = 'ZXGE_UNO'.
The problem wasn't the call RFC it was that I built l_t_range bad. I need the infoObject name.
This is correct!!
READ TABLE L_T_RANGE WITH KEY
         FIELDNAME = '/BIC/ZXGE_UNO'.
LOOP AT DATOS.
      L_T_RANGE-FIELDNAME = '/BIC/ZXGE_UNO'.
      L_T_RANGE-IOBJNM = 'ZXGE_UNO'.
      L_T_RANGE-SIGN = 'I'.
      L_T_RANGE-OPTION = 'EQ'.
      CONCATENATE '00' DATOS-WA+3(4) INTO L_T_RANGE-LOW.
      APPEND L_T_RANGE.
    ENDLOOP.
*READ TABLE L_T_RANGE WITH KEY+
+*FIELDNAME = '/BIC/ZXGE_UNO'.+
+*    L_IDX = SY-TABIX.+
+*    MODIFY L_T_RANGE INDEX L_IDX
Thanks a lot
Ana

How to include Time Interval in crystal report

Hi All,
I have to create a crystal report in XI release 2. In the report I have 2 query side prompts "FromDate" and "ToDate" and one report side prompt "Time Interval". I have to show the data for each time interval between the two dates. means suppose if my "Fromdate" is 23 March 2010 and "Todate" is 25 march 2010 and time interval is 1 hour then I have to show data for each 1 hour time gap. means suppose my data in Db starts from 23 march 2010,11:25:25 then I must show data between 11:25:15 to 12:25:15 and so on...upto 25 march 2010.
I am not able to retrieve the data accordingly. And how to use the timeinterval to retrieve data from db for that particular time interval.Please reply asap.
Edited by: anushree2187 on May 21, 2010 7:28 AM
Edited by: anushree2187 on May 21, 2010 7:37 AM

you can create a group on the date field and then select how to group it by date, you can go up to the second.

How to change color of a button for specific time interval in jsp

How to change color of a button for specific time interval in jsp.
Please help.
Thanks in advance.

This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
_The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
I hope this works for you too.

Set Time Interval with custom fields in generic list with view(SPViewCollection.SPViewType.Calendar)

I need to set time interval range with custom date fields in sharepoint view SPViewCollection.SPViewType.Calendar. How to do that?
My code is this:
System.Collections.Specialized.StringCollection viewFields = new System.Collections.Specialized.StringCollection();
viewFields.Add("FechaInicio");
viewFields.Add("FechaFin");
string query = @"<Query>
<Where>
<DateRangesOverlap>
<FieldRef Name=""FechaInicio"" />
<FieldRef Name=""FechaFin"" />
<FieldRef Name=""RecurrenceID"" />
<Value Type=""DateTime"">
<Week />
</Value>
</DateRangesOverlap>
</Where>
</Query>";
SPView newView = reserva.Views.Add("CalendarView", viewFields, query, 0, true, true, SPViewCollection.SPViewType.Calendar, false);
"FechaInicio" and "FechaFinal" ara datetime fields in my generic list.
Thanks.

Hi,
According to your post, my understanding is that you want to see the calendar view begin and end time for the time interval.
We can use the SharePoint Manager to view the internal name for the begin and end time for the time interval.
Open SharePoint Manager 2013->click your site->click
Lists->select your list name->click Views->select your calendar view name->click the
Schema Xml to check the internal name for the time interval begin and end.
We can download the SharePoint Manager in here:
http://spm.codeplex.com/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Capturing data of the previous time interval with Oracle Stream(HotLog)

I read from 10g Oracle manual that Oracle Steam can capture data within specified time interval with begin_data and end_data options.
For example :
BEGIN
DBMS_CDC_PUBLISH.CREATE_CHANGE_SET(
change_set_name => 'set_cns',
description => 'set_cns...',
change_source_name => 'HOTLOG_SOURCE',
stop_on_ddl => 'y',
begin_date => sysdate,
end_date => sysdate + 1);
END;
However if I set begin_date to previous time from now, Oracle doesn't caputre data anymore in this case.(HotLog method)
(I set begin_date => sysdate - 1/24
end_date => sysdate + 1/24.)
Does anybody know to capture the previous time interval with Oracle Stream?

Change C2 to:
cursor c2(passing_date IN date) IS
SELECT MONITOR_ID, SAMPLE_ID,
               COLL_TIME, DEW_POINT
    FROM ARCHIVE_DATA
    WHERE COLL_TIME < passing_date
    ORDER BY COLL_TIME desc;And rather than populating a table with the three records, you could just select the three records using: where COLL_TIME between Prev3_time and Prev1_time

Fixed time interval selection in Infopackage

Similar Messages

Maybe you are looking for