Fixing 'my number'

I just set up my old iPhone for my mom but it still shows my number as "my number" on the new phone. How can I fix this?

kkglass62,
That's a great question! Are you still signed into your Apple ID on the device? Here is a great instruction guide on signing out of an Apple ID; https://support.apple.com/en-us/HT203983.
Is she receiving calls on her number? Are other services working properly. Please share some details if assistance is still needed. Thanks
TrevorC_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Displayin message and fixing the number of rows in a table

Hi Experts,
I have a requirement like this
there is a table, where i need to diplay a message when there are no records and no rows should be visible on that table.
Also, when the records are populated from the context, i need to fix the number of rows in that table and display the records.
Please let me know hw this can be achieved.
Also in the table I have Link to URL, please let me know how to handle this reference, when i set the reference Property, its giving me an error stating that the file doesn't exist when the table gets loaded.
Thanks in Advance
Regards,
Palani

Hi
Oh!! You should to explain it at first thread itself that you want to display a JPG imange or other WDWebResourceTypetaken form the backend.
1. So this is not at all a URL
2. You have to convert binary data to WDWebResource then display it in either Image UI element or other (like PDF , txt etc)
3
try
               //        Read the datasource of the FileUpload
               IWDResource res = wdContext.currentContextElement().getResource();
               InputStream in = res.read(false);
               ByteArrayOutputStream bOut = new ByteArrayOutputStream();
               int length;
               byte[] part = new byte[10 * 1024];
               while ((length = in.read(part)) != -1)
                    bOut.write(part, 0, length);
               in.close();
               bOut.close();
               IPrivateUploadCompView.IImageTableElement ele = wdContext.nodeImageTable().createImageTableElement();
               ele.setImage(wdContext.currentContextElement().getResource().getUrl(0));
               ele.setText(res.getResourceName());
               wdContext.nodeImageTable().addElement(ele);
          catch (Exception e)
               wdComponentAPI.getMessageManager().reportWarning(e.toString());
Here I assume that you convert that data to IWDResource type or
4.
WDWebResource.getWebResource(wdContext.currentContextElement().getresource(), type);
// getResource of type binary which u read from BAPI and set it in local context , type is MIMETYPE or hardcode it as "JPG"
5. Further help
   [Help1|To Displayan Image in Webdynpro Java from Standard Function Module;
[Help2|http://wiki.sdn.sap.com/wiki/display/KMC/GettinganimagefromKMDocumentstobeusedinWeb+Dynpro]
[Help3|http://wiki.sdn.sap.com/wiki/display/KMC/GettinganimagefromKMDocumenttobeusedinWeb+DynPro]
It might code look strange at first , please do some reserch in SDN ,I did my best at this level.
Best Regards
Satish Kumar

Issue with fixed point number output from 9219 module for full bridge measurement (cRIO/FPGA)

Hi,
I have a question regarding the fixed point output acquired from a 9219 module (in FPGA on a cRIO) when setup to acquire a strain measurement (full bridge).
Software: Labview 2009
Hardware: cRIO-9012 (NI-RIO 3.2.1), NI-9219 module
The 9219 module is configured in the project as follow:
Ch0: Full-Bridge +/- 7.8mV/V
Ch1: Voltage +/- 4V
Ch2: Voltage +/- 15V
Ch3: Voltage +/- 60V
The calibration mode is 'Calibrated' so the FPGA outputs fixed point numbers.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
Any help/clarification is much appreciated.
Regards,
Mike

Hello Mike,
Hopefully I can help clarify some of the behavior you are seeing.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
For calibrated values on the FPGA VI, the returned data is a Voltage measurement, not a directly calculated strain value. Based on the specified ranges for the 9219 in a Full bridge configuration, 250 mV will encompass all possible input values, at the module provided excitation (2-2.7V dependent on the sensor gage resistance).
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As you may notice from the fix-point definition, the fixed point data contains 32-bit precision which is larger than the acquired precision of 24-bits provided by the 9219. The fixed point data-type is coded to accept input encompassing both the range and precision of the instrument; such that, no additional coercion of the input data values is required based on user-defined software settings, i.e. the bridge sensitivities +/- 7.8mV/V or +/-64mV/V.
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
The documentation does not clearly define that by varying the discrete levels of strain input (+/- 7.8mV/V or +/-64mV/V) the range of the ADC on the module is also adjusted. I am working to follow up further on this topic, to provide a clarification on the module documentation. As for scaling, the voltage values acquired regardless of the ADC resolution will still be related strain via the bridge sensitivity. The resolution of the ADC will simply define the smallest measurable change in the strain value.
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
For converting the acquired voltage values to a strain measurement, I would recommend the documentation linked here for a detailed explanation on strain calculation. Often, users will forward the acquired voltage data as fixed point values through a DMA FIFO to the RT controller on the Compact RIO; such that, they may handle conversion from voltage to strain using floating point math in real-time.
I hopes these responses provided a bit of clarity. I will continue to work to provide additional information on the 9219 specification information. Please post back any further questions.
Cheers!
Edit: Forgot to add the link.
Message Edited by Pcorcs on 04-14-2010 04:55 PM
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments

Default of fixed batch number for production order header????

Hi Experts,
In SAP, when create a production order, in the production order Header view, in the "Good Receipt" Tab, there is a field "Batch" , which means "Assigns a material that is manufactured in batches or production lots to a specific batch ".
For some special reasons, we want for some certain materials,when create production order every time,the "Batch" field will be a fixed values.
For example,for material "AB1" ,"CD2",when create production order every time,the "Batch" field will be "2345" automatically,do not need input manually.But for all the other materials, the "Batch" field would be null ,no value.
How can I do this? How can assign fixed batch number values to some certain materials in production order?
If there needs some ABAP development,which user exit do I need??
Thanks for any reply!

Hi V.SURESH
Thanks very much!
I know what you mean. Default batch number in the production order eans, there is no use of using batch management.
In fact, my purpose is just want to deactivate the batch management for some certain materials.
So for some certain materials,when create production order every time,the "Batch" field will be a fixed values.
How can I do this? How can assign fixed batch number values to some certain materials in production order?
If there needs some ABAP development,which user exit do I need??

Exponential to fixed point number convert

Hello All,
I am getting below result for the double value.
double d = 7777777.77;
System.out.println(d); O/P >> 7777777.77
double d1 = 88888888.88;
System.out.println(d1); O/P >> 8.888888888E7
Actually I dont want the value to be in Exponential format. I found that when the decimal is before 7 digits , am getting correct value (without exponential format). But when decimal is after 7 digits then value gets in exponential format.
If this is the default behaviour which we cant change then how to convert the exponential format number to fixed point number.
Thanks
Prasad.

Don't use the default conversion on double numbers except for debugging. Convert floating point numbers to String format either with String.format, or with a DecimalFormat object. Either gives you proper control over the format.

Sales Invoice - Fixing the number of rows isn't the solution. Ideas?

Hi All,
I have been working on converting the standard eBS Sales Invoice report to BIP over the past few weeks. I started to use the solution on Tim's blog:
http://blogs.oracle.com/xmlpublisher/2007/03/27/
For those people who haven't looked this, the solution uses variables to set and calculate the number of transaction rows to be displayed on a page. Filler rows are also inserted to pad out the page should the number of transaction rows be less that the number to be displayed on a page (if using this be careful though as there is a problem with the way the filler rows work as pointed out by Mike Parr in the comments of the blog http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html).
This solution is fine if the size of the data in the transaction row is never long enough to cause it to wrap within a column. For example, in the Sales Invoice, it is common for the Invoice Line Description to wrap 3 or 4 lines within the column. When this happens, the rows per page method goes out of the window as the number that can physically fit on the page is reduced due to the single data row spanning multiple layout rows.
I have had a good play around with fixing table row heights but to no avail. Also had a look at some of the standard RTF templates available in the latest release of R12. but couldn't find an example where this problem is addressed. I am 100% sure that someone must have hit this before so any advice and/or solutions would be greatly appreciated.
Perhaps the solution for this could be incorporated into a future blog post or example?
Cheers,
Jon.

Yep agreed. With fixed width fonts you could determine how many characters will display on a line but there is no telling where the word wrapping will occur. Suppose you could get really clever and use the position of the spaces to determine where the wraps will occur, then work out how many rows the line will take up (gulp!). Anyway, using fixed width fonts like courier will make the report look rubbish so I want to avoid this.
A response from the Oracle bod's wouldn't go a miss on this? Tim, et al?
Cheers,
Jon.

How to fix serial number not found error

i replaced the motherboard on my compaq mini 110 now it wont boot and says serial number not found in red and i cant get into bios how can i fix this or do i have too let hp do it ?
This question was solved.
View Solution.

Hi:
No, I don't. I'm from Joisey, but now live in Illinois.
Been to Queens many times back, in the day. Can you still go over the QB Bridge for free?
I miss the NY style pizza. I go home once a year for my pizza "fix."
Let your fingers do the walking thru the yellow pages, is my only recommendation (or online).
"HP computer repairs," is how I would search by.
Paul

Automatic batch determination with fixed batch number for production order

Hello all,
I want to create a production order where the batc number can be assigned for one component as Batch fixed value once the order is released.
1.- I have created the characteristic (CT04) assigned to the table MCHA and field CHARG (Batch number) and one value: LINER.
2.- I have created the class (CL02) and assign to this the characteristic.
3.- I have created the sort ZSORT and the batch (MSC1N).
4.- I have checked the classification in the material and it has assigned correctly the class and characteristic and the MRP2 view has the backflush = 1, batch entry = 3 and the prod. stor. location = COIL.
5.- I have created the strategy (COB1, strategy type CO02) and assigned the selection criteria and sort.
6.- I have created the order (CO01).
7.- I was releasing the order and the batch number was assigned but, with numbers!! and I need assign this with fixed value = LINER.
Could you help me please? How can I do it?
Kind regards,
SP
Edited by: SANDRA PALOMO on Mar 15, 2011 11:28 AM

Hi Vishwas.K
Thank you for your respone, but, doing more researching, let me explain you with more detail:
1.- I am going to the transaction CO02 in order to release the order, but, before it, I am checking the component by Go to > Overviews > Components.
2.- Then, I am selecting my component and making a click in "Batch determ. " button.
3.- The system is showing me many batch numbers and I select the "Selection criteria" button and the system said: "Selection class "LINERBATCH" does not contain any selection criteria". But, it has a characteristic that I have created before.
4.- Then, I select in the new screen "Selection criteria: Origin..." the"create" button.
5.- The system selection my class from the material classification and when I go back to the last screen, finally the system is showing me my batch: LINER.
Do you know why my selection criteria with my selection class is not working in automatic?
Thank you for your time and support.
Kind regards,
Sandra Palomo

Find (fix) column number in report list

Dear ABAPers,
Currently I develop a report that can show detail level. I use standard list to display the report.
In this report I have 3 main fields (FIN Doc No, PO No, and OLA No) in one line that if they are double clicked they will go to another different page.
The challege is to find out which one on the list that is double clicked, is it FIN No, PO No, or OLA No.
I use sy-cucol to find the column number but I just notice that sy-cucol will count the column from the beginning of screen shown, not from the very beginning of report. So sy-cucol is number of column relative to SAP left screen side. What I need is number of column fixed from the very beginning of report.
For example:
I write field to list as follow
WRITE: /2 T_OUT-BELNR,
           160 T_OUT-EBELN,
           182 T_OUT-KONNR.
And the screen listener as follow
IF sy-lsind = 1.
    IF sy-cucol > 2 AND sy-cucol < 13.
              "user double click on FIN Doc No
              "routine for FIN Doc No
    ELSEIF sy-cucol > 159 AND sy-cucol < 182.
              "user double click on PO No
              "routine for PO No
    ELSEIF sy-cucol > 181 AND sy-cucol < 200.
              "user double click on OLA No
              "routine for OLA No
    ENDIF.
ENDIF.
However this code doesn't work because when I scroll the screen to right sy-cucol is recalculate from 0 in the very left side of screen. So it means that sy-cucol will differenciate when I scroll the report to the right - left.
Does any body have solution for it? Are there any other system field that can replace sy-cucol?
Thanks
Regards
Hadi

Hi,
Use the statement GET CURSOR FIELD XX to determine the column in the list.
Sample code.
TABLES mara.
DATA it_mara TYPE TABLE OF mara.
DATA wa_mara TYPE mara.
DATA gv_field TYPE char30.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
START-OF-SELECTION.
SELECT *
   FROM mara
   INTO TABLE it_mara
   WHERE matnr IN S_matnr.
IF sy-subrc = 0.
   LOOP AT it_mara INTO wa_mara.
     WRITE:/ wa_mara-mandt, wa_mara-matnr,wa_mara-mtart.
     HIDE: wa_mara-mandt, wa_mara-matnr.
   ENDLOOP.
ENDIF.
AT LINE-SELECTION.
CASE sy-lsind.
    WHEN 1.
      GET CURSOR FIELD gv_field.
      WRITE 'TEST1'.
ENDCASE.
Regards,
Vasanth

How to track a Material Code in MM with a Fixed Asset number?

Hello Gurus!
is there any t-code or way to track or link a material code generated in MM with its related fixed asset nummber?
< removed by moderator - anybodies discussion is equally important >
Thanks
Message was edited by: Jürgen L

Are you talking about (J)Unit Testing? There's no easy way to test all things, that's why tests are often left completely undone, or are in bad shape.

Status Agent Not Reachable - How to set a fix port number?

My EM 10g was working fine http://localhost:5500/em
Now when I tried, it was not working. I looked into portlist and found out it there was additional port of 5502
But when I logged into port 5502, Status Agent Not Reachable. Other links were working fine.
I had even installed another DB called REPOS other than the default ORCL.
All the services were up and running and I was just bouncing services back and forth and luckly I got the original port 5500 to work and then I did not got the error "Status Agent Not Reachable".
So I just wanted to know how to set a dedicated port in case the port number changes back to 5502 and if I get the error again.
Thanks in advance.

Yes I installed multipe databases for eg ORCL was the default but I installed REPOS.
I did not uninstall the db.
Why does it show two different ports for ORCL 5500 and 5502 and for Repos it shows two ports but they are the same 5501.
Everything is on my local machine.
Following is from the portlist
Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (orcl) = 5500
Enterprise Manager Agent Port (orcl) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831
Enterprise Manager Console HTTP Port (ORCL) = 5502
Enterprise Manager Agent Port (ORCL) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831

Smartforms table: how to fix the number of rows to be display in the table.

Hello.
I´m having problems with a smartform. I have defined a window with 7 cm high. Then I have define a table to print the content of a table.
I'm using the header, the main area, and the footer. It seems to be ok. But the main area is sizeble. I mean, that if in the table has 2 records, it dispaly the 2 records and inmediatly display the footer. It probably use only 3 cm of the 7 cm defined for the high of the window.
And I want that the footer of the table would be display at the end of the 7 cm of the window. Is that posible ?
Please, tomorrow we will have our kick off the module and this is the last issue we have.
Thanks in advance for your help.

Better idea wud be to create a WINDOW, just Below you Main window (After table) ..
In Form Layout (Form Painter) you can fix this Window on any place , Pass the FOOTER text node over there .. So you will get a Static FOOTER diplay ..
That what you need ?? Let me know
Edited by: Lokesh Tarey on Jul 22, 2010 7:15 AM

Issue in exporting Crystal to PDF(Fixed Currency Number Value)

Hello EveryOne,
Currently working on report where one of my amount column i set the value as fixed currency and the data is appearing in crystal designer as below
$      300,000
$                 0
$          1,000
but when i am exporting to Pdf the results are appearing as
$300,000
           $0
    $1,000
Can anybody tell me how i can keep in PDF also as fixed currency. I am using Crystal XI.
Thanks In Advance
Ram

PDF export some times does its own thing, so not sure why you are losing the space.
You could convert currency to text, left justify and then place a $ with a space text to the text, that should force PDF export to keep alignment as you want.
Ian

JTextField - Fix the number of chars you can write

I want to fix the amount of characteres you can write in a JTextField.
I mean, that if the JTextField is fixed to 4, you can't write anymore than four characters.
The setColumns method does not restrict this condition.
How to do it?
Thanks in advanced.

Use a JFormattedTextField

Fixed Column Number CSV variable? How to parse

I have the following variable that is a result of a cfexecute that I would like to populate into a database. There doesn't appear to be a Line Feed but there are only three columns. My question is how can I accomplish parsing the 1st value as Column 1, 2nd value as Column 2, 3rd as column 3 and 4th as column 1, 5th as column two.... etc.
Thank you,

That dump looks like it came from BlueDragon, not from ColdFusion?
But anyway, what makes you say there's no line feeds? If it's based on looking at a <cfdump> result you won't be able to tell because a LF character (ie: chr(10)) does not not render as a line break in a browser,it'll just render as a whitespace character. It certainly looks to me like there's a whitespace character between each notional row of data in your CSV there.
I think you should verify what the data actually contains before trying any specific solution here.
That said, it's easy enough to have a loop that increments by three each time, and taking the index as the first column, and the index+1 and index+2 as the second on third columns, treating the string as a comma-delimited list.
Adam

Fixing 'my number'

Similar Messages

Maybe you are looking for