Flag "calculate tax" in FI docs generated through SD (RV type)

Hi gurus,
Our client is billing through the SD module by transaction VF01.
The FI document created when saving the invoice (RV type) has the flag "calculate tax" not checked.
Do you know where this flag is set? what effects has not having it checked?
Thanks,
VL

Hi
Ideally if it is configured for SD then VBRK-XBLNR and BKPF-XBLNR would be filled with the tax invoice number which is a 16 digit number. For your F1 invoice type check the accounting document type generated. It would mostly be RV.
You need to set up this accounting document type to consume the tax invoice number range. I guess FB70 transaction would be associated with accounting document type DR which is configured to use up the tax invoice number range.
So follow these steps:
1. First check the accounting document type created for the invoice of type F1.
2. Go to SPROCross Application Component-General Application FunctionsCross-Application Document NumberingIndonesia--Document Numbering
3. Check the document class created for country ID.
4. If document class is created as I guess it has been because you can already generate the number through FB70 transactions then check if accounting document type created from F1 invoice is assigned to the document class.
I guess it is this setting which you are missing. As a result of this tax invoice number is not getting generated for SD documents.
Thanks
Indranil

Similar Messages

When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

When the user press the button Calculate Tax and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
All setup looks fine.
Please let me know what can be done on this?
Regards,
Peu

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

Format of CSV file generated through iBot

What is the default format of csv file generated through iBot (UNICODE / UTF) ?
How can we configure a single iBot to generate CSVs, for example, in UTF format instead of UNICODE (assuming UNICODE is default).
-Jimit

Use this
https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=324436281886916&type=DOCUMENT&id=1459947.1&displayIndex=1&_afrWindowMode=0&_adf.ctrl-state=130oxyc5cv_71
Content:
Goal
Currently the CSV format in Agents always delivers the report results in tab delimited CSV. Is there a setting that can make the report result in a comma delimited CSV format when the reports are setup via Agents/iBots?
Fix
There is no setting that would make CSV output from an iBot be comma delimited as opposed to the tab delimited output from the web UI.
There is an enhancement request for this functionality. for more information, see bug 13802667 - COMMA DELIMITED CSV FORMAT FOR AGENTS/IBOTS has been logged to include this feature in future release.
As a work-around, you can to run a custom script from an Agent to convert tabs to commas. See chapter 4 (http://docs.oracle.com/cd/E21764_01/doc.1111/e18562/schedjobscripts.htm#BABGFBBD) of Oracle® Fusion Middleware Scheduling Jobs Guide for Oracle Business Intelligence Enterprise Edition 11g Release 1 (11.1.1) Part Number E18562-01 for more information on writing custom scripts.
If helps pls mark

Problem with "Tax Code" and "Calculate tax automatically" fields

Hi again.
I have made a program which posts account documents through the BAPI_ACC_DOCUMENT_POST function module, and, since there were some fields which weren't available for me to fill having the FM by itslef, I have implemented the AC_DOCUMENT BAdI.
All document data is provided by means of an SAP XI interface, through a Z IDoc.
When I create the Account Receivable (and/or Payable) structure, I fill, through the BAdI, the BKPF-XMWST (Calculate tax automatically) and BSEG-MWSKZ (Tax code) fields. However, even the resulting posted document does have the Tax Information fields completed (the ones in the BSET table), the BAPI doesn't create the tax position automatically (just like the FB01 or FB60 transactions do). Note that the amounts are sent in their gross value by the interface (that's why the debit and credit sides remain consistent and the document is posted correctly).
How can I have that position created? Is there a function module which I can call or something?
Thanks a lot in advance.

Hi
I only use the fm CALCULATE_TAX_FROM_NET_AMOUNT or CALCULATE_TAX_FROM_GROSSAMOUNT in order to get all information I need to transfer to the BAPI. Both fms return the data by table parameter T_MWDAT.
U can read this table and get all information u need, these code is from my old program, I hope it can help you:
- Calculate tax data:
CALL FUNCTION 'CALCULATE_TAX_FROM_NET_AMOUNT'
        EXPORTING
          I_BUKRS           = BUK_TO
          I_MWSKZ           = T_BASE-MWSKZ_OUT
          I_WAERS           = _BKPF-WAERS
          I_WRBTR           = T_BASE-WRBTR
        TABLES
          T_MWDAT           = T_MWDAT
       EXCPTIONS.
      IF SY-SUBRC <> 0.
      ELSE.
* Load tax item
        LOOP AT T_MWDAT.
          CLEAR W_GL_ITEM.
          W_GL_ITEM-HKONT   = T_MWDAT-HKONT.
          W_GL_ITEM-MWSKZ   = T_BASE-MWSKZ_OUT.
          IF T_BASE-KBETR = T_MWDAT-KBETR.
            W_GL_ITEM-WRBTR   = T_BASE-FWSTE.
          ELSE.
            W_GL_ITEM-WRBTR   = T_MWDAT-WMWST.
          ENDIF.
          W_GL_ITEM-IVA   = 'X'.
          W_GL_ITEM-KTOSL = T_MWDAT-KTOSL.
          W_GL_ITEM-TXJCD = T_MWDAT-TXJCD.
          W_GL_ITEM-KSCHL = T_MWDAT-KSCHL.
          W_GL_ITEM-TXJCD_DEEP = T_MWDAT-TXJCD_DEEP.
          W_GL_ITEM-TXJLV = T_MWDAT-TXJLV.
          W_GL_ITEM-BASE = T_BASE-WRBTR.
          COLLECT W_GL_ITEM INTO GL_ITEM.
- Append GL or Tax item for the BAPI
LOOP AT GL_ITEM INTO W_GL_ITEM .
    ITEMNO_ACC = ITEMNO_ACC + 1.
    IF W_GL_ITEM-IVA = SPACE.
* GL item
    ELSE.
* Tax item
      ACCOUNTTAX-ITEMNO_ACC = ITEMNO_ACC.
      ACCOUNTTAX-TAX_CODE   = W_GL_ITEM-MWSKZ.
      ACCOUNTTAX-ACCT_KEY   = W_GL_ITEM-KOSTL.
      ACCOUNTTAX-COND_KEY   = W_GL_ITEM-KSCHL.
      ACCOUNTTAX-TAXJURCODE = W_GL_ITEM-TXJCD.
      ACCOUNTTAX-TAXJURCODE_DEEP = W_GL_ITEM-TXJCD_DEEP.
      ACCOUNTTAX-TAXJURCODE_LEVEL = W_GL_ITEM-TXJLV.
      APPEND ACCOUNTTAX.
      PERFORM FILL_AMOUNT USING W_GL_ITEM-WRBTR W_GL_ITEM-BASE.
    ENDIF.
ENDLOOP.
Max
Edited by: max bianchi on Nov 25, 2009 7:43 PM

Calculate tax in Vendor Down Payment

Hi,
While posting down payment to my service vendor including service tax amount in F-48 after tick the calculate tax also, it is not asking for tax code and it is not showing service tax seperately. Only vendor a/c and bank a/c's are simulating. Please tell me how to calculate tax while doing vendor down payment.
Regards,
Prasad

> Hi,
>
> Thanx for ur reply, every month we are paying through
> advance payment for internet connection including
> service tax and this is fixed amount.
1. Enter vendor down payment - gross amount (do not calculate tax)
2. Post a recurring document to your vendor account which will include the lines:
C Vendor
D Internet charge expense account
D tax
3. Allocate invoice with down payment

How to pass the check 'calculate Tax Automatically' in IDOC

Hi,
I need mark the check box in the 'calculate Tax Automatically' in the IDOC. The IDOC will then go to BDC session 'FB01' to post. Which program I should to make the modification and what IDOC structure has this XMWST field?
Any help is appreciated!
Thanks,
Helen

I am trying to do the same using INVOIC01 MM and MIRO
I found an OSS note that I thought may help but found a few anomolies.
Solution
The user exit CUSTOMER-FUNCTION '015' is available in the subroutine MRM_DOCUMENT_COMPLETE (include LMRMH1F). In this user exit, the "Calculate Tax" indicator (XMWST) can be set automatically for the IDoc.
Here the field e_rbkpv-xmwst must be set to 'x' in the structure e_rbkpv. In addition, f_change must be set to 'x'.
The Include is not LMRM1F but LMRMHFOT, in this include if I change the two fields rbkpv-xmwst and f_change in debugging, it works. There must be a way to do this!
We already do this using FI posting with INVOIC02 and the calculate taxes is flagged when you set calculate taxes on net amount in FB00.
Any suggestions would be gratefully recieved.
Thanks Ian

Indicator:Tax Determ.with doc.date (Assign Co.cd to Doc Date for Tax Detrm)

Hi there,
Facing a question when configuring Tax on Sales/Purchases. In Calculation node, there is a sub node named "Assign company code to document date for tax determination". Can anyone explain me on this, why there is such a logic to calculate tax based on document date?
Any responses will be awarded,
Regards,
Samson

Hi,
Through this activity, you specify per company code the following data necessary for processing taxes with jurisdiction codes: whether the baseline date for determining the tax percentages should be the posting date (default date) or the document date.
The system usually takes the posting date for this purpose. However, if you want the system to determine tax percentages on the basis of the document date, you must configure the system accordingly at this point.
The tax percentage rates are dependent on the date in the case of the taxation procedure for jurisdiction codes.
Regards,
Jigar

"Calculate tax" on MIRO/FB60 to be checked by default

Hi,
Can anyone tell me if it's possible through configuration to make the "Calculate tax" box on MIRO/FB60 checked by default and grayed out (user isn't allowed to uncheck it).
Regards,
Yathi P

Hi ,
the problem that you have stated can be resolved by creating a screen varient for the same , where in you can make the calculate tax as only output mode .
for this execute the t code SHD0 , enter the T code and create a screen varient for the same .
do revert back in case you have any queries in creating a screen varient .
Cheers ,
dewang

Set Cursor to w.tax base (QSSHB) in FB60 through BTE event 1120

Is it possible to Set Cursor to w.tax base (QSSHB) in FB60 through BTE event 1120 .
I have to sum up the amt for GL Ac in BTE 1120 and dispay the msg.i have done upto this point.
Now i have to put the cursor to QSSHB with calcualted amt.so that user can go and change the amt.
Thanks in advance for any help. or is there any other way through user exit/badi.
Suresh.

Yes custom folders needs to be created and mapping needs to be copied and changed.
How ever in your instance you are just changing the size of the datatype ,so I dont see the necessity of creating the same.
When you create custom folders there is an effort involved.
Like
1)Create custom folders in Informatica repository.
2)Copy the required mappings.
3)Develop/customize mappings.
4)Create logical folders in DAC.
5)Assign the mappings to these folders.
5)Setup the connection parameters.
6)Needs Subject area to be assebmled
7)EP to be built again.
8)Also generate parameter to your custom folder as well.
I would suggest only there is any customziation(any new table addition,SQL change,adding more columns,changing the inbuilt logic etc) go with custom folder approach.
Mark correct or helpful if it helps,
Regards,
Veeresh Rayan
Edited by: Veeresh Rayan on May 12, 2013 12:04 PM

Problem in posting Er PF Wage Types generated through Retro

Hello all,
I am running India Payroll in ECC 6.0 with HR Package level 52.
We have revised wages for two employees in the month of June with effect from 13.04.2010.
Retro has run successfully for two months April & May and all the wage types are calculated and passed on for FI Posting correctly except Employer PF Wage Types.
I am getting error while posting wages to FI as Employer PF Contribution & Employer Pension Contribution generated for April & May are not considered for FI Posting. Only current month values are taken into account. Whereas I don't have any problem with Employee Contribution. /ZF5 is generated with total of past two months contribution and also passed on to FI.
What might be the problem with Er PF Wage Types /3F3 & /3F4?
We have not posted June salary till now due to above said posting error. Now July Payroll is also started.
Experts, please help me to sort out the issue.
Thanks in advance.
Regards,
Hema

Hi,
Thanks for quick reply.
The error is "Posting balance not cleared".
We have changed all the components including basic salary. Payroll program has taken PF Basis correctly and calculated PF amounts, both for Employee & Employer contribution correctly for individual months.
As I mentioned for all the three months Employee Contribution is considered for FI posting through regular wage type for current month and through /ZF5 for last two months.
But for Employer Contribution only June amount is considered for posting even though the correct amounts are shown for other two months in RT (three lines for /3F3 & /3F4 each).
Due to this, total amount for Balance Sheet Accounts is less where as Expense Accounts is shown higher as Employer Contribution is not considered for April & May, causing imbalance in Accounting entries.
GL Accounts are mapped correctly. Otherwise even the current month amount will not be carried to FI.
Hope my explanation is clear.
Thanks & Regards,
Hema

How can we default a Purchase Organisation in the PR generated through MRP

Hi,
How can we default a Purchase Organisation in the PR generated through MRP
(This is a Auto generated PR when the MRP Run is taken)
We take a MRP Run for CBP. After the MRP Run system Auto generates a PR. But this PR does not have the P.organisation mentioned in it. It has to be done manually.
How can we Default the P.Organiastion in the PR.
NS

The Purchasing Organization is only filled in the Purchase Requisition
when a source is assigned because it represents a source of supply.
Please also refer to attached note 206684 for more information.
When executing a MRP-run, it is checked first if there exists a quota
arrangement, the source list is read after it and the purchasing
organization is taken from the source list. But before filling
the relevant field in the purchase requisition (EBAN-EKORG), the
system checks if there exists a record in the source list which is
RELEVANT TO MRP, which means that the parameter 'MRP' has to be set to
'1'.
So please ensure that MRP = 1 in ME01 for the existing records and start
the next planning run with planning mode = 3 and check the results.

Error in opening PDF generated through HAP_DOCUMENT(ESS/MSS)

Hi Experts,
User is getting an error while opening the PDF generated through "Print" functionality of appraisal document(HAP_Document).
There is a problem i'am facing in this BSP's,when i click on PRINT after creating Appraisal,it will ask me to either open or save in pdf.
But when i open or save it and open it is giving me this message in Adobe
"Acrobat could not open u2018webforms.pdfu2019 because it is either not a supported file type or because the file has been corrupted (for example, it was sent as an email attachment and wasnu2019t correctly decoded).
To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF."
Any body please guide me with a solution.
With Regards,
Surender Dahiya

Hello Surender,
there may have been connection problems to your content repository when you tried to view this file. I would also recommend that you apply the latest version of the Acrobat Reader. I would recommend that you run a
trace on the RFC destination to your archive and see what errors are reported when this error occurs again.
Best Regards,
Deepak..

List of material for those planning file entry is generated through MDAB.

Hi Friends,
Can we get a list of materials for those planning file entry is generated through background job using t-code MDAB.
Right now we can find the count of material only ...

Hi ,
Thanks for looking into this.
In MDRE we can only get this message :
Number of set planning file entries : _____
And in table DBVM we can get the complete list of material irrespective of fact that Planning file entry is earlier maintained or not.
I only want to find the material list whose entry is not there but maintained by the batch job.

How to calculate taxes in purchase register

Hi all,
i want to calculate taxes in purchase register for that
i use function module 'calculate_tax_item' but it calculates
tax on po . i want taxes should calculate as per miro
means it should be calculated on basic amount.
Thanks
Dinesh

Hi,
i dont know whether there is any function module available of no.. but u can get it from FI tables... link is from MIRO u can get the invoice no.. go to BKPF table in that there is a AWKEY filed is there put the MIRO No + Miro Year in that..u can use a select single .. from that u get the FI document .... field is BELNR.. then go to BSET table.. it contain the duty amount put that FI document number , FI year and Compny code and also put Debit/credit indicator as S.. u will list of records with duty.. from that HWBAS is he duty amount field and there is one percentage field.. if it is 12 % in that field its look like 120 as a multiple of 10. Note this BSET will only be populated if there is any tax involved.. other wise it will be empty(ofcourse it cointian the whole accessable value amount).. i think it will help u..
Regards
Maneesh Chandran

How to calculate tax / discount amount on PO

Hi,
I have to calculate tax and discount on Purchase order and have add that to ekpo-netwr to get the actual amount. Can you please tell me how to do that?
So far I have been taking the EKKO-KNUMV and going to KONV table and serach for records with that KNUMV. But here I am stuck.
I can not understand (I mean I can not find the field to distinguish) which of the records is actually being used in the PO and has an amount (non-zero) against it, which I see in ME23N in "Condition" at header label.
Reward Points Guaranteed.
Regards,
Anid

Hi,
Ya. Actually I need to know the Discount, Indiviual taxes (Like Freight tax etc) which we see the the "condition" tab of Header Data in ME23N. I have to make a total of them and subtract from (Sum of EKPO-NETWR ) to calculate the ACTUAL PRICE.

Flag "calculate tax" in FI docs generated through SD (RV type)

Similar Messages

Maybe you are looking for