Flagged notes
Before I upgraded to Mavericks I had notes flagged in the mail app.
Post upgrade the flagged number shows "9" but clicking on the flagged entry displays nothing.
I am assuming that nothing is displayed because the note are now separate.
The notes app does not appear to support flagging.
How can I clear the flagged entry in the mail app?
If I add a flagged email I can see the 9 flagged entried are "purple" but they do not display.
Thoughts?
Thanks
Ok this was an advance - of sorts ......
Moved preferences and Leopard opened fine (all Icons back on the desktop) and finder working ... how do I decide what preferences files to copy back? do I need to log out each time to test? or do I have to close down? Sound v boring?
And what preference sticks all the desktop back in its new folder?
This isn't a great upgrade experience (and I have problems of three machines)
Similar Messages
-
ERS flag not picked automatically
hi gurus ,
we are using srm 5.0 , extended classic scenario
while creating a po in srm with ers vendor with account assignment wbs , the ers flag is not getting picked automatically.
while if i use the same vendor and use account assignment cost center , the ers flag is getting picked in the po.
so for wbs po , we are manually going to the follow -on tab in item data and ticking the ers indicator.
what could be the reason for this ? why is the ers flag not getting picked from the vendor master.please reply !
-
When I flag a photo, the little orange flag not longer shows in the upper right corner of the thumbnails. I know it is getting flagged, though because under the "Metadata" menu the status is changing. I'm running version 3.5.1.
It was working the last time I used aperture, as far as I know.OK, another search of the discussions gave me the answer: https://discussions.apple.com/thread/2736821
-
SVM state database replica Master flag not set for any replica
Hi guys,
Recently i have done root mirroring. After creating svm volumes, i ran the metadb command to create state database replicas on the replaced disk. I created only one replica that time. I tried creating additional replicas but it said like replica already exist on the slice. So i deleted the replica on the slice. Thn i created 3 replicas again & ran metadb. Output of metadb command is below. I found there is not master flag not set for any replica. I like to know whether it would create any issue or it is fine.
flags first blk block count
a u 16 8192 /dev/dsk/c1t0d0s7
a u 8208 8192 /dev/dsk/c1t0d0s7
a u 16400 8192 /dev/dsk/c1t0d0s7
a p luo 16 8192 /dev/dsk/c1t1d0s7
a p luo 8208 8192 /dev/dsk/c1t1d0s7
a p luo 16400 8192 /dev/dsk/c1t1d0s7That shouldn't be any problem, i think the metadb's are just read at boot, and at boot one of the replicas will be choosen as the master, and will then get the m-flag.
I suspect that you deleted the replica which was used as the master during the last boot, which is why none of your replicas have the m-flag at the moment, which is not a problem as it will be choosing a new replica during the next boot.
.7/M. -
Problem :ALV:Deletion Flags not showing in output
hi all !
I have a alv program which displays customer data.there are three deletion flags columns in the output.
First deletion flag will be: KNA1-LOEVM
Second deletion flag will be: KNB1-LOEVM
Third deletion flag will be: KNVV-LOEVM
earlier all three were showing.but now no one is showing.i'm pasting my code here if any expert can have a look and find out the BUG.
CODE STARTS----
report zqsdcap_cust.
INCLUDE DECLARATIONS
include:
ziabapcapph_macros. "Holcim Useful Macros
TABLE DECLARATIONS
tables:
tvko, "Org. Unit: Sales Organizations
t001, "Company codes
kna1, "Customer Master
knvv, "Customer master sales
knvi, "Customer tax classificat'n
knb1, "Customer master company code
<<CR003-DEVK949538 start ins
adr6. "SMTP numbers
<<CR003-DEVK949538 end ins
TYPE DECLARATIONS
type-pools:
slis.
STRUCTURE DECLARATIONS
Define structure for keep data in ALV list
data: begin of gs_output_list,
vkorg like knvv-vkorg, "Sales organization
ktokd like kna1-ktokd, "Customer A/C grp
kunnr like kna1-kunnr, "Customer number
vtweg like knvv-vtweg, "Distribution channel
name1 like kna1-name1, "Name1
name3 like kna1-name3, "Name3
name4 like kna1-name4, "Name4
stras like kna1-stras, "Street
cityc like kna1-cityc, "City
bezei1 like t005h-bezei, "Sales office
land1 like kna1-land1, "Country
regio like kna1-regio, "Region
bezei2 like t005u-bezei, "Region decription
kdgrp like knvv-kdgrp, "Customer group
ktext like t151t-ktext, "Cust grp name
bzirk like knvv-bzirk, "Sales district
bztxt like t171t-bztxt, "Description
zterm like knvv-zterm, "Payment term
lzone like kna1-lzone, "Transport zone
vtext like tzont-vtext, "Description
erdat like kna1-erdat, "Creation date
end of gs_output_list.
Internal table for customer tax data
data: begin of gs_output_tax,
vkorg like knvv-vkorg, "Sales organization
kunnr like kna1-kunnr, "Customer number
vtweg like knvv-vtweg, "Distribution channel
name1 like kna1-name1, "Name1
name3 like kna1-name3, "Name3
name4 like kna1-name4, "Name4
ort01 like kna1-ort01, "City
stcd1 like kna1-stcd1, "STD code
spart like knvv-spart, "Division
taxkd like knvi-taxkd, "Tax classific'n
tatyp like knvi-tatyp, "Tax category
vtext like tskdt-vtext, "Tax description
end of gs_output_tax.
Internal table for HVL customer master
data: begin of gs_output_hvl,
kunnr like kna1-kunnr, "Customer number
stceg like kna1-stceg, "VAT registration no
telfx like kna1-telfx, "Fax number
telf1 like kna1-telf1, "First telephone number
stras like kna1-stras, "House number and stret
ort02 like kna1-ort02, "District
cityc like kna1-cityc, "City code
bezei like t005h-bezei, "City description
regio like kna1-regio, "Region
ort01 like kna1-ort01, "City
name2 like kna1-name2, "Name2
name1 like kna1-name1, "Name1
bzirk like knvv-bzirk, "Sales district
spart like knvv-spart, "Division
vtweg like knvv-vtweg, "Distribution channel
vkorg like knvv-vkorg, "Sales organization
end of gs_output_hvl.
Internal table for customer database CRM
data: begin of gs_output_crm,
vkorg like knvv-vkorg, "Sales organization
vtweg like knvv-vtweg, "Distribution channel
bzirk like knvv-bzirk, "Sales district
kunnr like kna1-kunnr, "Customer number
name1 like kna1-name1, "Name1
name2 like kna1-name2, "Name2
stras like kna1-stras, "House number street
ort01 like kna1-ort01, "City
ort02 like kna1-ort02, "District
pstlz like kna1-pstlz, "Postal code
cityc like kna1-cityc, "City code
telf1 like kna1-telf1, "First telephone number
telfx like kna1-telfx, "Fax number
vkbur like knvv-vkbur, "Sales office
regio like kna1-regio, "Region
vkgrp like knvv-vkgrp, "Sales group
kdgrp like knvv-kdgrp, "Customer group
kvgr3 like knvv-kvgr3, "Customer group 3
altkn like knb1-altkn, "Previous record number
erdat like knvv-erdat, "Creation date
found_dat like zcrm_bp_ext-found_dat, "Found date
<<CR000-DEVK943142 start del
versg like knvv-versg, "Customer statistic grp
bukrs like knb1-bukrs, "Company code
<<CR000-DEVK943142 end del
end of gs_output_crm.
Internal table for customer information
data: begin of gs_output_info,
kunnr like kna1-kunnr, "Customer number
vkorg like knvv-vkorg, "Sales organization
vtweg like knvv-vtweg, "Distribution channel
stcd2 like kna1-stcd2, "Tax code
name1 like kna1-name1, "Name1
name2 like kna1-name2, "Name2
<<CR002-DEVK944835 start ins
name3 like kna1-name3, "Name3
<<CR002-DEVK944835 end ins
stras like kna1-stras, "House number street
ort01 like kna1-ort01, "City
ort02 like kna1-ort02, "District
pstlz like kna1-pstlz, "Postal code
regio like kna1-regio, "Region
land1 like kna1-land1, "Country code
cityc like kna1-cityc, "City code
telf1 like kna1-telf1, "First telephone number
telfx like kna1-telfx, "Fax number
<<CR001-DEVK944239 start ins
bzirk like knvv-bzirk, "Sales District
vkbur like knvv-vkbur, "Sales Office
kdgrp like knvv-kdgrp, "Customer group
<<CR001-DEVK944239 end ins
vkgrp like knvv-vkgrp, "Sales group
kvgr3 like knvv-kvgr3, "Customer group 3
versg like knvv-versg, "Customer stat grp
kdkg2 like kna1-kdkg2, "Customer condition gp2
kdkg1 like kna1-kdkg1, "Customer condition gp1
<<CR001-DEVK944239 start del
kdgrp like knvv-kdgrp, "Customer group
<<CR001-DEVK944239 end del
altkn like knb1-altkn, "Previous record#
erdat like knvv-erdat, "Creation date
note_text(200) type c, "<<CR003-DEVK949538 ins
smtp_addr like adr6-smtp_addr, "<<CR003-DEVK949538 ins
loevm1 like kna1-loevm, "Deletion flag all
loevm2 like knb1-loevm, "Deletion flag Cd
loevm3 like knvv-loevm, "Deletion flag sal
end of gs_output_info.
ALV Grid Declaration
data:
gs_fieldcat type slis_fieldcat_alv,
gs_layout type slis_layout_alv,
gs_event type slis_t_event,
gs_variant like disvariant,
gs_sort_info type slis_sortinfo_alv,
gs_exit_caused_by_user type slis_exit_by_user,
gs_tabname type slis_tabname,
gs_header type slis_entry.
INTERNAL TABLE DECLARATIONS
Define internal table for keep data in ALV list
data:
gt_output_list like table of gs_output_list,
gt_output_tax like table of gs_output_tax,
gt_output_hvl like table of gs_output_hvl,
gt_output_crm like table of gs_output_crm,
gt_output_info like table of gs_output_info,
<<CR003-DEVK949538 start ins
gv_text like tline occurs 0 with header line,
<<CR003-DEVK949538 start ins
ALV Grid Declaration
gt_fieldcat type slis_t_fieldcat_alv,
gt_list_top_of_page type slis_t_listheader,
gt_list_top_of_page2 type slis_t_listheader,
gt_sort_info type slis_t_sortinfo_alv.
VARIABLE DECLARATIONS
data:
ALV Grid Declaration
gv_save,
gv_exit_caused_by_caller,
gv_repid type sy-repid,
gv_user_command type slis_formname value 'USER_COMMAND',
gv_top_of_page type slis_formname value 'TOP_OF_PAGE',
gv_top_of_list type slis_formname value 'TOP_OF_LIST',
gv_end_of_list type slis_formname value 'END_OF_LIST',
lv_store like thead-tdname, "<<CR003-DEVK949538 ins
lv_id like thead-tdid, "<<CR003-DEVK949538 ins
lv_lines type i. "<<CR003-DEVK949538 ins
SELECTION SCREEN DECLARATIONS
Define selection-screen of query
selection-screen: begin of block blk with frame title text-001.
select-options: s_vkorg for knvv-vkorg "Sales org
obligatory
memory id vko,
s_bzirk for knvv-bzirk, "Sales district
s_vtweg for knvv-vtweg, "Dist channel
s_spart for knvv-spart "Division
default 'CM',
s_taxkd for knvi-taxkd, "Tax classific'n
s_kunnr for kna1-kunnr, "Customer number
s_regio for kna1-regio, "Region
s_kdgrp for knvv-kdgrp, "Customer group
s_vkgrp for knvv-vkgrp, "Sales group
s_vkbur for knvv-vkbur, "Sales office
s_lzone for kna1-lzone, "Zone
s_erdat for kna1-erdat, "Creation date
s_zuawa for knb1-zuawa, "Key for sorting
s_ktokd for kna1-ktokd, "Customer A/C grp
s_altkn for knb1-altkn, "Previous rec no
s_bukrs for knb1-bukrs "Company code
obligatory
memory id buk,
s_loevm1 for kna1-loevm, "Deletion flag all
s_loevm2 for knb1-loevm, "Deletion flag Cd
s_loevm3 for knvv-loevm. "Deletion flag sal
selection-screen: end of block blk.
selection-screen: begin of block b2 with frame title text-002.
parameters: pr_cust1 radiobutton group a1
default 'X'
user-command bkg,
pr_cust2 radiobutton group a1,
pr_cust3 radiobutton group a1,
pr_cust4 radiobutton group a1,
pr_cust5 radiobutton group a1.
selection-screen: end of block b2.
AT SELECTION-SCREEN ON S_VKORG
at selection-screen on s_vkorg.
select vkorg
into tvko-vkorg
from tvko
where vkorg in s_vkorg.
authorization check for sales org.
authority-check object 'V_VBRK_VKO'
id 'VKORG' field tvko-vkorg
id 'ACTVT' field '03'.
check sy-subrc ne 0.
message e002(zgen) with 'No authorization for sales org.'
tvko-vkorg.
endselect.
AT SELECTION-SCREEN ON S_BUKRS
at selection-screen on s_bukrs.
if pr_cust4 eq 'X' or
pr_cust5 eq 'X'.
select bukrs
into t001-bukrs
from t001
where bukrs in s_bukrs.
authorization check for plant and company code
authority-check object 'A_S_WERK'
id 'BUKRS' field t001-bukrs
id 'WERKS' dummy.
check sy-subrc ne 0.
message e002(zgen) with 'No authorization for this company code.'
t001-bukrs.
endselect.
endif.
AT SELECTION-SCREEN OUTPUT
at selection-screen output.
loop at screen .
if pr_cust1 eq 'X'.
if screen-name = 'S_VTWEG-LOW' or
screen-name = 'S_VTWEG-HIGH' or
screen-name = 'S_SPART-LOW' or
screen-name = 'S_SPART-HIGH' or
screen-name = 'S_TAXKD-LOW' or
screen-name = 'S_TAXKD-HIGH' or
screen-name = 'S_BUKRS-LOW' or
screen-name = 'S_BUKRS-HIGH' or
screen-name = 'S_ERDAT-LOW' or
screen-name = 'S_ERDAT-HIGH' or
screen-name = 'S_ALTKN-LOW' or
screen-name = 'S_ALTKN-HIGH' or
screen-name = 'S_VKBUR-LOW' or
screen-name = 'S_VKBUR-HIGH' or
screen-name = 'S_LOEVM1-LOW' or
screen-name = 'S_LOEVM1-HIGH' or
screen-name = 'S_LOEVM2-LOW' or
screen-name = 'S_LOEVM2-HIGH' or
screen-name = 'S_LOEVM3-LOW' or
screen-name = 'S_LOEVM3-HIGH'.
screen-input = 0.
endif.
elseif pr_cust2 eq 'X'.
if screen-name = 'S_BZIRK-LOW' or
screen-name = 'S_BZIRK-HIGH' or
screen-name = 'S_KDGRP-LOW' or
screen-name = 'S_KDGRP-HIGH' or
screen-name = 'S_LZONE-LOW' or
screen-name = 'S_LZONE-HIGH' or
screen-name = 'S_KTOKD-LOW' or
screen-name = 'S_KTOKD-HIGH' or
screen-name = 'S_ERDAT-LOW' or
screen-name = 'S_ERDAT-HIGH' or
screen-name = 'S_KTOKD-LOW' or
screen-name = 'S_KTOKD-HIGH' or
screen-name = 'S_ALTKN-LOW' or
screen-name = 'S_ALTKN-HIGH' or
screen-name = 'S_VKBUR-LOW' or
screen-name = 'S_VKBUR-HIGH' or
screen-name = 'S_LOEVM1-LOW' or
screen-name = 'S_LOEVM1-HIGH' or
screen-name = 'S_LOEVM2-LOW' or
screen-name = 'S_LOEVM2-HIGH' or
screen-name = 'S_LOEVM3-LOW' or
screen-name = 'S_LOEVM3-HIGH' or
screen-name = 'S_BUKRS-LOW' or
screen-name = 'S_BUKRS-HIGH' or
screen-name = 'S_VKGRP-LOW' or
screen-name = 'S_VKGRP-HIGH'.
screen-input = 0.
endif.
elseif pr_cust3 eq 'X'.
if screen-name = 'S_BZIRK-LOW' or
screen-name = 'S_BZIRK-HIGH' or
screen-name = 'S_KDGRP-LOW' or
screen-name = 'S_KDGRP-HIGH' or
screen-name = 'S_LZONE-LOW' or
screen-name = 'S_LZONE-HIGH' or
screen-name = 'S_ERDAT-LOW' or
screen-name = 'S_ERDAT-HIGH' or
screen-name = 'S_KTOKD-LOW' or
screen-name = 'S_KTOKD-HIGH' or
screen-name = 'S_SPART-LOW' or
screen-name = 'S_SPART-HIGH' or
screen-name = 'S_TAXKD-LOW' or
screen-name = 'S_TAXKD-HIGH' or
screen-name = 'S_REGIO-LOW' or
screen-name = 'S_REGIO-HIGH' or
screen-name = 'S_ALTKN-LOW' or
screen-name = 'S_ALTKN-HIGH' or
screen-name = 'S_VKBUR-LOW' or
screen-name = 'S_VKBUR-HIGH' or
screen-name = 'S_LOEVM1-LOW' or
screen-name = 'S_LOEVM1-HIGH' or
screen-name = 'S_LOEVM2-LOW' or
screen-name = 'S_LOEVM2-HIGH' or
screen-name = 'S_LOEVM3-LOW' or
screen-name = 'S_LOEVM3-HIGH' or
screen-name = 'S_BUKRS-LOW' or
screen-name = 'S_BUKRS-HIGH' or
screen-name = 'S_VKGRP-LOW' or
screen-name = 'S_VKGRP-HIGH' or
screen-name = 'S_VTWEG-LOW' or
screen-name = 'S_VTWEG-HIGH'.
screen-input = 0.
endif.
elseif pr_cust4 eq 'X'.
if screen-name = 'S_LZONE-LOW' or
screen-name = 'S_LZONE-HIGH' or
screen-name = 'S_TAXKD-LOW' or
screen-name = 'S_TAXKD-HIGH' or
screen-name = 'S_REGIO-LOW' or
screen-name = 'S_REGIO-HIGH' or
screen-name = 'S_ZUAWA-LOW' or
screen-name = 'S_ZUAWA-HIGH'.
screen-input = 0.
endif.
else.
if screen-name = 'S_LZONE-LOW' or
screen-name = 'S_LZONE-HIGH' or
screen-name = 'S_TAXKD-LOW' or
screen-name = 'S_TAXKD-HIGH'.
screen-input = 0.
endif.
endif.
modify screen.
endloop.
INITIALIZATION
initialization.
perform deactivate_program using sy-cprog.
START OF SELECTION
start-of-selection.
Customized function to get data from database table
perform get_data.
<<CR003-DEVK949538 start ins
perform get_internal_note_text tables gt_output_info.
<<CR003-DEVK949538 end ins
Create sort of ALV list
perform build_sort.
Send data to ALV list to display
if pr_cust1 eq 'X'.
gs_tabname = text-003.
gs_header = text-004.
perform write_alv_report tables gt_output_list
gt_sort_info.
elseif pr_cust2 eq 'X'.
gs_tabname = text-005.
gs_header = text-006.
perform write_alv_report tables gt_output_tax
gt_sort_info.
elseif pr_cust3 eq 'X'.
gs_tabname = text-007.
gs_header = text-008.
perform write_alv_report tables gt_output_hvl
gt_sort_info.
elseif pr_cust4 eq 'X'.
gs_tabname = text-009.
gs_header = text-010.
perform write_alv_report tables gt_output_crm
gt_sort_info.
else.
gs_tabname = text-011.
gs_header = text-012.
perform write_alv_report tables gt_output_info
gt_sort_info .
endif.
FORM EVENTTAB_FIELD
Fill Event tab, for ALV Grid Display
form eventtab_field using gs_events type slis_t_event.
data:
ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gs_events.
read table gs_events with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move gv_top_of_page to ls_event-form.
append ls_event to gs_events.
endif.
endform. " eventtab_field
FORM TOP_OF_PAGE
Write at Top of Page of ALV grid
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
endform. "top_of_page
FORM COMMENT_BUILD
Write header of ALV grid
form comment_build using lt_top_of_page type slis_t_listheader
gs_header.
data:
lv_tdate(10),
lv_fdate(10),
ls_line type slis_listheader.
clear: ls_line.
ls_line-typ = 'H'.
ls_line-info = gs_header.
append ls_line to lt_top_of_page.
endform. "comment_build
FORM INIT_FIELDCAT
Fill Field Catalog for ALV Grid
form init_fieldcat using gs_tabname.
refresh: gt_fieldcat.
use this function to get the all fields in the structure.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = gv_repid
i_internal_tabname = gs_tabname
i_inclname = gv_repid
changing
ct_fieldcat = gt_fieldcat.
if sy-subrc eq 0.
clear mark for key field to set color of key column
gs_fieldcat-key = ''.
modify gt_fieldcat from gs_fieldcat transporting key
where fieldname ne space.
read table gt_fieldcat with key fieldname = 'FOUND_DAT'
into gs_fieldcat.
gs_fieldcat-seltext_l = text-013.
modify gt_fieldcat from gs_fieldcat
transporting seltext_l
where fieldname = 'FOUND_DAT'.
<<CR003-DEVK949538 start ins
read table gt_fieldcat with key fieldname = 'NOTE_TEXT'
into gs_fieldcat.
gs_fieldcat-seltext_l = text-014.
modify gt_fieldcat from gs_fieldcat
transporting seltext_l
where fieldname = 'NOTE_TEXT'.
<<CR003-DEVK949538 start ins
endif.
endform. "init_fieldcat
FORM INIT_LAYOUT
Layout initial
form init_layout using gs_layout type slis_layout_alv.
gs_layout-info_fieldname = 'LINECOLOR'.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
endform. " init_layout
FORM WRITE_ALV_REPORT
form write_alv_report tables gt_output
gt_sort_info.
ALV Grid display
clear: gv_repid,
gv_save.
gv_repid = sy-repid.
gs_variant-report = gv_repid.
gv_save = 'A'.
Build fieldcatalog
perform init_fieldcat using gs_tabname.
Build list events
perform eventtab_field using gs_event.
Show in ALV Grid form
perform init_layout using gs_layout.
Build comments
perform comment_build using gt_list_top_of_page[]
gs_header.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = ' '
i_callback_program = gv_repid
is_layout = gs_layout
i_save = gv_save
is_variant = gs_variant
it_events = gs_event[]
it_sort = gt_sort_info[]
it_fieldcat = gt_fieldcat[]
importing
e_exit_caused_by_caller = gv_exit_caused_by_caller
es_exit_caused_by_user = gs_exit_caused_by_user
tables
t_outtab = gt_output
exceptions
program_error = 1
others = 2.
endform. "write_alv_report
FORM GET_DATA
form get_data.
Get customer list
if pr_cust1 eq 'X'.
select knvv~vkorg
kna1~ktokd
kna1~kunnr
knvv~vtweg
kna1~name1
kna1~name3
kna1~name4
kna1~stras
kna1~cityc
kna1~regio
kna1~land1
knvv~kdgrp
knvv~bzirk
knvv~zterm
kna1~lzone
kna1~erdat
from kna1 join knvv
on kna1kunnr = knvvkunnr
into corresponding fields of table gt_output_list
where kna1~kunnr in s_kunnr
and knvv~vkorg in s_vkorg
and knvv~bzirk in s_bzirk
and kna1~regio in s_regio
and knvv~kdgrp in s_kdgrp
and kna1~lzone in s_lzone
and kna1~erdat in s_erdat
and kna1~ktokd in s_ktokd.
loop at gt_output_list into gs_output_list.
Get City decsription
perform get_city_description using gs_output_list-cityc
changing gs_output_list-bezei1.
Get Region description
select single bezei
from t005u
into gs_output_list-bezei2
where bland = gs_output_list-regio
and land1 = gs_output_list-land1"<<CR000-DEVK942345 ins
and spras = sy-langu.
Get customer group description
select single ktext
from t151t
into gs_output_list-ktext
where kdgrp = gs_output_list-kdgrp
and spras = sy-langu.
Get sales district description
select single bztxt
from t171t
into gs_output_list-bztxt
where bzirk = gs_output_list-bzirk
and spras = sy-langu.
Get zone decription
select single vtext
from tzont
into gs_output_list-vtext
where zone1 = gs_output_list-lzone
and spras = sy-langu.
modify gt_output_list from gs_output_list index sy-tabix
transporting bezei1
bezei2
ktext
bztxt
vtext.
clear gs_output_list.
endloop.
Get customer tax data
elseif pr_cust2 eq 'X'.
select kna1~kunnr
kna1~name1
kna1~name3
kna1~name4
kna1~ort01
kna1~stcd1
knvv~vkorg
knvv~spart
knvv~vtweg
knvi~taxkd
knvi~tatyp
from kna1 join knvv
on kna1kunnr = knvvkunnr
join knvi
on kna1kunnr = knvikunnr
into corresponding fields of table gt_output_tax
where kna1~kunnr in s_kunnr
and knvv~vkorg in s_vkorg
and knvv~vtweg in s_vtweg
and knvv~spart in s_spart
and kna1~regio in s_regio
and knvi~taxkd in s_taxkd.
Get customer tax description
loop at gt_output_tax into gs_output_tax.
select single vtext
from tskdt
into gs_output_tax-vtext
where tatyp = gs_output_tax-tatyp
and taxkd = gs_output_tax-taxkd
and spras = sy-langu.
if sy-subrc eq 0.
modify gt_output_tax from gs_output_tax index sy-tabix
transporting vtext.
clear gs_output_tax.
endif.
endloop.
Get customer HVL data
elseif pr_cust3 eq 'X'.
select kna1~kunnr
kna1~stceg
kna1~telfx
kna1~telf1
kna1~stras
kna1~ort02
kna1~cityc
kna1~regio
kna1~ort01
kna1~name2
kna1~name1
knvv~bzirk
knvv~spart
knvv~vtweg
knvv~vkorg
from kna1 join knvv
on kna1kunnr = knvvkunnr
into corresponding fields of table gt_output_hvl
where kna1~kunnr in s_kunnr
and knvv~vkorg in s_vkorg.
loop at gt_output_hvl into gs_output_hvl.
Get city description.
perform get_city_description using gs_output_hvl-cityc
changing gs_output_hvl-bezei.
if sy-subrc eq 0.
modify gt_output_hvl from gs_output_hvl index sy-tabix
transporting bezei.
clear gs_output_hvl.
endif.
endloop.
Get cust CRM data
elseif pr_cust4 eq 'X'.
select kna1~kunnr
knvv~versg "<<CR000-DEVK943142 del
knvv~vkorg
knvv~vtweg
knvv~bzirk
knvv~vkgrp
knvv~kdgrp
knvv~vkbur
kna1~name1
kna1~name2
kna1~ort01
kna1~pstlz
kna1~regio
kna1~stras
kna1~telf1
kna1~telfx
kna1~ort02
kna1~cityc
knvv~kvgr3
knb1~altkn
knb1~bukrs "<<CR000-DEVK943142 del
knvv~erdat
zcrm_bp_ext~found_dat
from kna1 join knvv
on kna1kunnr = knvvkunnr
join knb1
on knvvkunnr = knb1kunnr
join zcrm_bp_ext
on knb1kunnr = zcrm_bp_extkunnr
into corresponding fields of table gt_output_crm
where kna1~kunnr in s_kunnr
and knvv~vkorg in s_vkorg
and knvv~vtweg in s_vtweg
and knvv~spart in s_spart
and knvv~bzirk in s_bzirk
and knvv~kdgrp in s_kdgrp
and knvv~vkgrp in s_vkgrp
and knvv~vkbur in s_vkbur
and knvv~erdat in s_erdat
and kna1~ktokd in s_ktokd
and kna1~loevm in s_loevm1
and knb1~loevm in s_loevm2
and knvv~loevm in s_loevm3
and knb1~bukrs in s_bukrs
and knb1~altkn in s_altkn.
else.
Get customer information
<<CR001-DEVK944342 start del
select kna1~kunnr
knvv~vkorg
knvv~vtweg
kna1~stcd2
kna1~name1
kna1~name2
kna1~ort01
kna1~land1
kna1~pstlz
kna1~regio
kna1~stras
kna1~telf1
kna1~telfx
knvv~bzirk "<<CR001-DEVK944239 ins
knvv~vkbur "<<CR001-DEVK944239 ins
kna1~ort02
kna1~cityc
knvv~vkgrp
knvv~kvgr3
knvv~versg
kna1~kdkg2
kna1~kdkg1
knvv~kdgrp
knb1~altkn
knvv~erdat
kna1~loevm
knb1~loevm
knvv~loevm
<<CR001-DEVK944342 end del
<<CR001-DEVK944342 start ins
select kna1~kunnr
knvv~vkorg
knvv~vtweg
kna1~stcd2
kna1~name1
kna1~name2
kna1~name3 "<<CR002-DEVK944835 ins
kna1~stras
kna1~ort01
kna1~ort02
kna1~pstlz
kna1~regio
kna1~land1
kna1~cityc
kna1~telf1
kna1~telfx
knvv~bzirk
knvv~vkbur
knvv~kdgrp
knvv~vkgrp
knvv~kvgr3
knvv~versg
kna1~kdkg2
kna1~kdkg1
knb1~altkn
knvv~erdat
kna1~loevm
knb1~loevm
knvv~loevm
<<CR001-DEVK944342 end ins
from kna1 join knvv
on kna1kunnr = knvvkunnr
join knb1
on kna1kunnr = knb1kunnr
<<CR001-DEVK944252 start del
into corresponding fields of table gt_output_info
<<CR001-DEVK944252 end del
<<CR003-DEVK949538 start del
into table gt_output_info "<<CR001-DEVK944342 ins
<<CR003-DEVK949538 end del
<<CR003-DEVK949538 start ins
into corresponding fields of table gt_output_info
<<CR003-DEVK949538 end ins
where kna1~kunnr in s_kunnr
and knvv~vkorg in s_vkorg
and knvv~vtweg in s_vtweg
and knvv~spart in s_spart
and knvv~bzirk in s_bzirk
and knvv~kdgrp in s_kdgrp
and knvv~vkgrp in s_vkgrp
and knvv~vkbur in s_vkbur
and knvv~erdat in s_erdat
and kna1~ktokd in s_ktokd
and kna1~regio in s_regio
<<CR001-DEVK944252 start del
and kna1~loevm in s_loevm1
and knb1~loevm in s_loevm2
and knvv~loevm in s_loevm3
<<CR001-DEVK944252 end del
<<CR001-DEVK944252 start ins
and ( kna1~loevm in s_loevm1
or knb1~loevm in s_loevm2
or knvv~loevm in s_loevm3 )
<<CR001-DEVK944252 end ins
and knb1~zuawa in s_zuawa
and knb1~bukrs in s_bukrs
and knb1~altkn in s_altkn.
<<CR003-DEVK949538 start ins
loop at gt_output_info into gs_output_info.
select single adrnr
into kna1-adrnr
from kna1
where kunnr = gs_output_info-kunnr.
check sy-subrc eq 0.
select single smtp_addr
into adr6-smtp_addr
from adr6
where addrnumber = kna1-adrnr.
check sy-subrc eq 0.
gs_output_info-smtp_addr = adr6-smtp_addr.
modify gt_output_info from gs_output_info.
endloop.
<<CR003-DEVK949538 end ins
endif.
<<CR003-DEVK949538 start ins
loop at gt_output_info into gs_output_info.
lv_store = gs_output_info-loevm1.
endloop.
<<CR003-DEVK949538 end ins
endform.
FORM BUILD_SORT
form build_sort.
if pr_cust1 eq 'X' or
pr_cust2 eq 'X'.
clear gs_sort_info.
gs_sort_info-fieldname = 'VKORG'.
gs_sort_info-spos = 1.
gs_sort_info-up = 'X'.
append gs_sort_info to gt_sort_info.
endif.
clear gs_sort_info.
gs_sort_info-fieldname = 'KUNNR'.
gs_sorhi shivaji!
thx for the reply.
can u chk whether there is any problem with the queries or not.
regards
sachin -
Estimated recalc flag not set when option value changed
Hi,
Here is the problem.
when i change the option value using front end and ran the procedure in dev, one for exprecalc and the other for estm recalc,then estimated flag & expense flag changed to 25964.which is correct.
when i repeated the same process in UAT,only expense is changing 25964
but not estimated,it remains 26040.
only one record is there.
for '03/14/2003', i changed the option value
select estm_reclcn_c,exps_reclcn_c from grn
where grn_d=to_date('03/14/2003','mm/dd/yyyy')
and org_grp_i=44;
what might be the reason.Any clue
Thanks in advance.Hello 511111,
You haven't given us much to go on but it sounds like there are differences in either the software (PL/SQL, SQL etc) or the data between your dev and uat environments that is causing the differing behaviour.
Cheers,
Colin -
Document Flags not showing on Web Excel
We are using BW3.5 SEM4.0.
Documents are added to cells in planning layouts.
Documents flags are showing up on web and BEx reports. They are also showing up on non-Excel web planning layouts, and Excel Gui layouts.
The flags are, however, not showing on Web Excel layouts. Althought the document could still be viewed, if you know which cell they are located in.
Is there a solution to this? Thanks for reading.
WilliamHi guys,
I have a related problem: I set up BPS to handle the documents (and I already tested it, it works fine).
My 4 characteristics are WBS element, version, fisc per, and material.
Now, I am just creating a web reports that should also display these documents. What do I have to adjust in the Query designer? Do I have to restrict the report to exactly this combination to see them?
(I have tried Query properties ->Display ->Display Document links, it shows icons per column, but does not display any BPS document I created)
any help is appreciated
thanks,
martin -
OSB 10gR3 - Process WS-Security flag not working with PasswordDigest
Hi,
By Oracle documentation when you set the "process ws-security header" in security section of a proxy service, the proxy service act as an active intermediary and consume the ws-security header received in inbound messages. This feature works fine when you call the proxy service using WS-Security Username Token Profile PasswordText, but when you send Username Token with PasswordDigest I got the following error: +"weblogic.xml.crypto.wss.WSSecurityException: Unable to validate identity assertions"+
I am using SoapUi to call the proxy with passwordDigest, WSS-Password Type option set to PasswordDigest.
Proxy configured with:
General tab -> WSDL based proxy service, this wsdl doesn't have ws-policy definitions inside.
Transport tab -> Get all headers = Yes
HTTP Transport tab -> HTTPS Required = No / Authentication = Basic
Operation tab -> Enforce WS-I Compliance = not checked / Selection Algorithm = SOAP Body Type
Message Content tab -> default settings
Policy -> Added Auth.xml(predefined) policy to request policies.
Security tab -> Process WS-Security header = Yes / Custom Authentication settings = none
Error --->
+<01/12/2009 09h34min55s BRST> <Error> <OSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault, message-id: 6198860737666014185--de42214.12549f82d66.-7fdb, proxy: AlphaTests/MyProxy/Proxy/MyLogProxy, operation: null]+
--- Error message:
+<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurity</faultcode>*<faultstring>Unable to validate identity assertions.</faultstring>*</env:Fault></env:Body></env:Envelope>+
weblogic.xml.crypto.wss.WSSecurityException: Unable to validate identity assertions.
+ at weblogic.wsee.security.wss.SecurityPolicyValidator.processIdentity(SecurityPolicyValidator.java:133)+
+ at weblogic.wsee.security.wss.SecurityPolicyValidator.processInbound(SecurityPolicyValidator.java:77)+
+ at weblogic.wsee.security.WssServerPolicyHandler.processInbound(WssServerPolicyHandler.java:54)+
+ at weblogic.wsee.security.WssServerPolicyHandler.processRequest(WssServerPolicyHandler.java:30)+
+ at weblogic.wsee.security.WssHandler.handleRequest(WssHandler.java:74)+
+ at com.bea.wli.sb.security.wss.WssInboundHandler.processRequest(WssInboundHandler.java:155)+
+ at com.bea.wli.sb.security.wss.WssHandlerImpl.doInboundRequest(WssHandlerImpl.java:201)+
+ at com.bea.wli.sb.context.BindingLayerImpl.addRequest(BindingLayerImpl.java:257)+
+ at com.bea.wli.sb.pipeline.MessageProcessor.processRequest(MessageProcessor.java:66)+
+ at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:508)+
+ at com.bea.wli.sb.pipeline.RouterManager$1.run(RouterManager.java:506)+
+ at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)+
+ at weblogic.security.service.SecurityManager.runAs(Unknown Source)+
+ at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)+
+ at com.bea.wli.sb.pipeline.RouterManager.processMessage(RouterManager.java:505)+
+ at com.bea.wli.sb.transports.TransportManagerImpl.receiveMessage(TransportManagerImpl.java:371)+
+ at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:279)+
+ at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper$1.run(HttpTransportServlet.java:277)+
+ at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)+
+ at weblogic.security.service.SecurityManager.runAs(Unknown Source)+
+ at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.securedInvoke(HttpTransportServlet.java:276)+
+ at com.bea.wli.sb.transports.http.HttpTransportServlet$RequestHelper.service(HttpTransportServlet.java:237)+
+ at com.bea.wli.sb.transports.http.HttpTransportServlet.service(HttpTransportServlet.java:133)+
+ at weblogic.servlet.FutureResponseServlet.service(FutureResponseServlet.java:24)+
+ at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)+
+ at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)+
+ at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)+
+ at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)+
+ at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)+
+ at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)+
+ at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)+
+ at weblogic.security.service.SecurityManager.runAs(Unknown Source)+
+ at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)+
+ at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)+
+ at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+Eduardo,
Yes, but the flag "Process WS-Security header" needs to be set to 'No' and I included a delete node to remove the wsse:Security element from header. Attaching Auth.xml predefined policy to my request operation, causes OSB to include the policy directive in my WSDL, but the PasswordText(see below).
In Oracle security guide we have steps to configure PasswordDigest in the Oracle Service Bus Security Configuration using the WLS Console http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/security/model.html#wp1062542
My doubt is: Is this a bug? "Process WS-Security header" flag is supposed to work with PasswordDigest?
My WSDL with WS-Policy statements after Auth.xml policy was configured.
<?xml version="1.0" encoding="UTF-8"?>
<s2:definitions targetNamespace="http://alpha.tests.org" xmlns:s0="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:s1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:s2="http://schemas.xmlsoap.org/wsdl/" xmlns:s3="http://alpha.tests.org" xmlns:s4="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">
<s0:Policy s1:Id="encrypt-custom-body-element-and-username-token">
<wssp:Identity xmlns:wssp="http://www.bea.com/wls90/security/policy">
<wssp:SupportedTokens>
<wssp:SecurityToken TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken">
<wssp:UsePassword Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText"/>
</wssp:SecurityToken>
</wssp:SupportedTokens>
</wssp:Identity>
</s0:Policy>
<wsp:UsingPolicy s2:Required="true"/>
<s2:types>
<xsd:schema elementFormDefault="qualified" targetNamespace="http://alpha.tests.org" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:impl="http://alpha.tests.org" xmlns:s0="http://schemas.xmlsoap.org/wsdl/" xmlns:s1="http://alpha.tests.org" xmlns:s2="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="EchoRequest">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="send" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="EchoResponse">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="response" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</s2:types>
<s2:message name="echoRequest">
<s2:part element="s3:EchoRequest" name="echoPartReq"/>
</s2:message>
<s2:message name="echoResponse">
<s2:part element="s3:EchoResponse" name="echoPartResp"/>
</s2:message>
<s2:portType name="MyAlphaPort">
<s2:operation name="echo">
<s2:input message="s3:echoRequest" name="echoRequest"/>
<s2:output message="s3:echoResponse" name="echoResponse"/>
</s2:operation>
</s2:portType>
<s2:binding name="MyAlphaBinding" type="s3:MyAlphaPort">
<s4:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<s2:operation name="echo">
<s2:input name="echoRequest">
<s4:body use="literal"/>
<wsp:Policy>
<wsp:PolicyReference URI="#encrypt-custom-body-element-and-username-token"/>
</wsp:Policy>
</s2:input>
<s2:output name="echoResponse">
<s4:body use="literal"/>
</s2:output>
</s2:operation>
</s2:binding>
<s2:service name="MyAlphaBindingQSService">
<s2:port binding="s3:MyAlphaBinding" name="MyAlphaBindingQSPort">
<s4:address location="http://CLXSP0272:7001/MyAlphaService"/>
</s2:port>
</s2:service>
</s2:definitions> -
Junk mail-why don't I have an option for Is junk mail in messages flag not junk mail
I have a brown coloured email which has been accurately diagnosed as junk mail, but when I go to Messages>flag>...the only two options I have are "not junk mail" and "mark as unread" yet in the help support it says that it should have "junk mail" there too. So far I cant mark it as junk mail - so I usually just delete them. Any advice please? Thank you.
Have you studied Mail prefernces? If not, go to Mail > preferences > Junk mail and check out the options there. Alternately, click on the 'info' question mark and follow up anything you are currently unsure of.
-
Physical Inventory Status Flag Not Reset after Year End Inventory Procedure
Hi,
We are just done with the Year End Inventory Procedures, and to my surprise, a lot of Storage Bins are having their Physical Inventory status flag as ACTIVE, which they should not have.
An example bin has incorrect status-u201Ccountedu201D in the associated inventory record number . LINV status is L-cleared. LINK status is Z-counted, LINP status is Z-counted and physical inventory flag is ON in table LAGP, but status must be L-cleared and physical inventory flag should be OFF (or blank) in table LAGP.
Our users did not use LI20 to clear the empty bins or bins had no difference to post (meaning book qty & count qty are the same).
I already tried the Program RLREOLPQ and OSS Note 824904, but no its of no use in our Case.
Any guess/hint for the problem?I solved this with thehelp of a Zprogram writeen wrt the OSS note mentioned above in the question.
-
GR based IV flag not checked in PO
Hello,
I have checked the GR based IV flag in the vendor master record. However, when I create a PO the GR based IV flag is not flowing through to the PO. The flag remains unchecked in the PO.
Can someone please point what could be the issue?
Thank you.Hi,
Please check the GR based IV flag checked or not in Inforecord. If not , you need to tick in inforecord. It will work. Try this out.
Regards,
abi -
Gr-based-IV flag not changable by SRM buyer
Hi,
We are on SRM 7, ECS. Our vendor masters in ECC do not have GR-based-IV flag ticked. When we create a SRM PO, the GR-based-IV is not ticket by default. The following are the default status of the 3 indicators in SRM PO by default:
GR indicator: Ticked
Invoice Expected: Ticked
Confirmation based Invoice verification (this is GR-based-IV): Not ticked
Now the buyer wants to enable the GR-based-IV indicator in the SRM PO, while keeping the GR indicator and Invoice Expected ticked. He is unable to so, since the field is grayed out. Is this a SRM bug , since this is allowed in ECC PO ( i.e. if we directly an ECC PO)
On similar lines, if the vendor master has u201CConfirmation based Invoice verificationu201D ticked and the SRM PO also has Confirmation based Invoice verification ticked, how the buyer can untick it while keeping the GR indicator and Invoice Expected as ticked.
This SRM behavior is different from ECC behavior. Is this a bug and is there a note for it?
Rgds
sumendraHi,
you have told that in the vendor master in the ECC the Flag is not ticked.
If the vendor has been replicated from ECC then in SRM also the tick will not be there.
Option 1
if you want the GR Flag to be ticked .please do so in ECC and replicate the vendor in SRM
Option 2.
go to the supplier POWL .
Select the supplier and tick the
Confirmation based Invoice verification (this is GR-based-IV).
Create Shopping cart PO will be created with flag ticked
This SRM behavior is different from ECC behavior. Is this a bug and is there a note for it?
No
Regards
G.Ganesh Kumar -
Acceptance Flag not appearing in Service Entry Sheet
Hi experts,
At the time of service entry creation, acceptance flag is not appearing. I am facing this problem with one particular SAP Login ID only.
With the same PO, the acceptance Flag is appearing in another SAP Login ID.
I think it seems to be setting problem. Please guide me.
Suggestions / Solutions will be highly appreciated
Regards,
( Rajneesh Gulati )Hi,
Enter the SRN acceptance screen (ML81n) where you arn't getting the flag and type "/NSU53".
The system will give you all the missing authorizations in the screen for the i.d.
then forward the same to ur basis team for providing the missing authorization.
Thank you -
Dear Brothers,
I come to a scenario were one of our Windows 2008 R2 Server without Service Pack 1, was Flag under SCCM 2007 Reports Update Status for Service Pack 1 deployment to be "Not
Required" which definitely inaccurate.
What I want to know what are the conditions for the Software Update to send a status to SCCM Server that the Service Pack is “Not
Required” instead of the other way around?
Is there anyone that can guide me to any KB Article regarding this behavior?
Regards,Yes, I know this is an old post, I’m trying to clean them up. Did you figure this out, if so how?
I have seen this before and what I have done is manually applied the SP1 to the server. Only then did the error show up as why SP1 didn’t apply. After fixing the error, CM was apply to apply SP1 and other SU to the server.
http://www.enhansoft.com/ -
Iphoto Flagging NOT working ??
I just scrolled through about 15,000 photos and flagged 100's i wanted to use for my website.
They are NOT showing up in flagged photos- though each individual photo IS correctly flagged.
I also tried creating an event from flagged photos to see if it could pull them out- but only about 36 showed up there in the event.
If I go to my website and "add photos" and choose "flagged" only about 36 show up. Does anyone have any idea what is going on ? OMG i HATE iphoto, esp since the last upgrade !!! Seems there is always something wrong.
Thanks- RoseWith the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring? Which were they?
are you running a "managed" or "referenced" library? Check iPhoto's Advanced preference pane to see how it compares to the screenshot below:
what type/model of Mac?
how much free space on your boot drive?
On one of the photos that you flagged and doesn't show up what do you see if you double click on it to view full sized? Can you?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
Maybe you are looking for
-
Hello, I recently, decided to upgrade from 19.0b to the current (26.0) version, as "Tab Utilities" now supports 26, but am finding one of the visual changes counter productive. My two workstations have multiple monitors. One has 2 monitors (2560x1600
-
Our online number is not working when trying to ca...
Hej Our online number is not working when trying to call from Telia mobile phones in denmark. I have checked with Telia in Denmark and they tell us that the problem is a "prefix" that is set wrong from SKYPE's side? Could someone at skype please help
-
Importing a .3ds file --- Can anyone help please
Here is a world i have written in java 3d I can import a .obj file into this world but i want to import a file called Flipp.3ds but it keeps giving me an error Here is the complete class ..... Can anyone help Im pretty new to java 3d import java.io.*
-
Local machine using - expecting remote machine
Any advice on this one? I did modify the security / firewall to except IChat 2009-01-04 19:42:44 -0600: No data has been received for the last 10 seconds. Audio channel info: local machine using 10.0.1.200:16402, expecting remote machine to send to 6
-
No wifi in Windows 8.1??? Lenovo G585
Hi all. I have tried yo update my Windows 8 to 8.1. But after the update I have no wifi?!?!? Has the problem been solved in the 8.1 Update 1?