Orange flag not appearing

When I flag a photo, the little orange flag not longer shows in the upper right corner of the thumbnails. I know it is getting flagged, though because under the "Metadata" menu the status is changing. I'm running version 3.5.1.
It was working the last time I used aperture, as far as I know.

OK, another search of the discussions gave me the answer: https://discussions.apple.com/thread/2736821

Similar Messages

Acceptance Flag not appearing in Service Entry Sheet

Hi experts,
At the time of service entry creation, acceptance flag is not appearing. I am facing this problem with one particular SAP Login ID only.
With the same PO, the acceptance Flag is appearing in another SAP Login ID.
I think it seems to be setting problem. Please guide me.
Suggestions / Solutions will be highly appreciated
Regards,
( Rajneesh Gulati )

Hi,
Enter the SRN acceptance screen (ML81n) where you arn't getting the flag and type "/NSU53".
The system will give you all the missing authorizations in the screen for the i.d.
then forward the same to ur basis team for providing the missing authorization.
Thank you

Release button flag not appearing in ML81N

Dear All
In my development system when I try to release service entry sheet through transaction ML81N in edit mode the release button flag is not appearing but in my quality system this release button flag is appearing.What could be the reason??
Pls help.
Regards
Satish Kumar

Hi,
its authorisation issue,Consult Basis Consultant & Check and compare roles assigned to user ID in both client.
Regards,
Biju K

Status Flag not appearing if branching

I have a CP project with branching after a question slide (slide 14). If the user gets the question wrong, they follow an alternate path to slide 15 to review the correct answer. Then they hit slide 16. If they get the question right, they skip slide 15 and hit slide 16. The user who gets the question right will never see slide 15, thus making the TOC think they didn't see all the slides. The TOC will not mark the module as complete with a status flag. Help?

Hello,
TOC can help users by marking slides as seen. But you have to be aware that only slides that are completely viewed will get the status flag. It is also great for self paced learning, for navigation. From your question I understand that you want it to take over the role of a LMS: completion of a course is normally reported by the LMS. Even there a branching in a course will cause problems if you want to have a Completed status reported. For a LMS you could indicate which % of slides have to be watched.
What do you really want to achieve with the TOC? Perhaps it could be realized with some variables and advanced actions.
Lilybiri

Firefox 4 upgrade how do I reset Yahoo toolbar as its does not appear in dropdown VIEW list? Also Norton Internet Security 2011 does not flag up safe/unsafe sites on browser. Help

Just upgraded to Firefox 4. My Yahoo toolbar has disappeared and I can't work out how to reset it as it does not appear in the View drop-down list. Also NIS 2011 no longer flags up safe/unsafe sites when browsing.
Thanks

For the Yahoo toolbar, make sure you have the latest version that is compatible with Firefox 4, available from https://addons.mozilla.org/firefox/addon/yahoo-toolbar
Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Service entry sheet release flag is not appearing in the change mode.

Hi,
In Service entry sheet release flag is not appearing in the change mode(ML81N). though release strategy is exsists in the header level.
note:
1.No changes done release setting, classes, or any other parameter.
2.Last day Few service entry sheets have been released by user .
3.And also i tried with different user , whereas he is geeting release flag, but concern user is not getting?
wht could be reasons?
Please provide suitable solution.
regards,
kumar.

Issue here is user is having authorization issue. Please run ML81N and execute /NSU53 report.
Also execute ML81n and then /NSU53 report for the other user whos does not have this problem. Then send both the reports to Security team asking them to add the missing object in the user's role who has the problem.
Hope this helps.
Ganesh

HT201250 Time machine makes whirring noise 24 hours a day. Orange light often flashes. Does not appear to be overheating. Can you help? Thank you.

Time machine makes whirring noise 24 hours a day. Orange light often flashes. Does not appear to be overheating. Can you help?

First: Are you wearing/regularly checking your radiation badge?
Second: What does the little Time Machine icon (in the menubar) say when you click on it? Alternatively, what does Time Machine Preferences (in System Preferences) tell you is going on?
Third: http://pondini.org/TM/Troubleshooting.html

LiveCycle 8.0 Digital Signature shows Orange Flag ONLY IF Blank Form Has Submit or Email Button

My subject line says it all. After a lot of experimenting, including reinstalling Adobe Designer Standard 8.0, I have found that, in Adobe LiveCycle 8.0.1291.1.339988, my drag-and-dropped Document Signature Field will include a clickable orange flag ONLY IF the blank form I started with includes an E-mail button or Submit button. Strange but true. If you then delete these buttons, the orange clickable flag still appears fine.
Try it...
In Adobe Designer Standard 8.0 LiveCycle:
1. File > New.
2. Select Use a blank form, Next.
3. Next.
4. In Form Return Setup dialog box, DEselect Add an Email button and DEselect Add a print button (so that both are NOT checkmarked).
5. Click Finish.
6. Drag a Document Signature Field to the blank page.
7. Click PDF Review tab. Note that no orange clickable flag appears for the user then to be able to use for entering a digital signature.
Close the page.
Try a variation now that will work (yielding an orange clickable flag):
1. File > New.
2. Select Use a blank form, Next.
3. Next.
4. In Form Return Setup dialog box, SELECT either the Add an Email button OR the Add a print button (so that either IS checkmarked).
5. Click Finish.
6. Drag a Document Signature Field to the blank page.
7. Click PDF Review tab. Note that an orange clickable flag DOES appear this time for the user then to be able to use for entering a digital signature.
8. For further test, click the Design View tab and now DELETE the displayed button.
9. Click PDF Review. The flag is still there.
BOTTOM LINE: It at least looks like it's not just "Distribute forms" that requires that you have a button at Blank Form creation time. Also "Digital Signature" functionality requires that you display a button at Blank Form creation time -- which you can then delete.
A bug? Or do I have some major concept wrong -- maybe I'm mis-interpreting the whole Digital Signature concept and process?

Is this in the wrong forum? The problem I am having is with Acrobat's Distribution feature.
Shawn Gallagher
Program Specialist, Records Management, OSS
[email protected]
202-70(7-5595)
>>> MichaelKazlow <[email protected]> 2/18/2010 9:49 PM >>>
Please repost in the Designer forum.

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED.....

Hello. I bought on Dec. 17th 2007 at Orange shop in Beausoleil (south France) an iPhone with the option of unlocking the Sim (100 Euro plus). I followed all instructions. Everything was perfect, on Dec. 24th I was able to unlock the iPhone and used with Orange sim, MonacoTelecom sim and Vodafone sim. BUT the iPhone had a problem: when in sleep mode it did't received calls. So Afer 24 hours I stopped to use, UNSAFE. After Christmas holidays I called Apple assistance, they send me UPS and I returned iPhone to Apple (Jan. 4th 2008). I received a NEW iPhone on Jan. 8th 2008, VERY RUSH. Perfect service, I thought (...making terrible error...). The iPhone was LOCKED and I wasn't able to use. Now starts all the problems and for this reason I'm writing.
I called Apple and Orange many times. Orange didn't received the documents from Apple for the changing of IMEI and Serial, for them I had the first iPhone. After many cals finally I asked Apple to send something official for the changing.
....Days goes on and on.......
Every day two times I called Orange, but evert time I received different versions of my situation. Everyday I tried to restore the iPhone but still simlocked.
On Jan.15th after a meeting with a lawyer I decided to make pression to Apple: infact I returned them an unlocked iPhone and I received back a locked one.
I finally was able to speak with a "supervisor" (Mr. F...) and he tried to solve the problem.
On Jan. 16th I spoke with another "supervisor" (Mr. J...) and he told me to make another time the restore, because they changed the firmware.
From now I tried to make the restore many times with Orange sim. Everything seems to go well but when I put another sim on iTunes there is a white page with:
"THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please etc etc....".
So the iphone is locked!!! Maybe is country locked, I don't know.
Incredible, unbelievable.
From Apple they told me to wait someting from US, but until now ..... nothing, I received no news from Apple.
The bad situation is that after more than 30 days after the buy I am not able to use the hardware I bought!
I hope that someone from Apple can read this post (sorry if is so long, but with this details I think that in Apple can understand the problem).
I send in warranty an hardware with certain features that I payed to Apple and I received back it with different features.
That's not serious.
After many days, next week I think to go by legal means if Apple France is'nt able to solve the issue.
Many thanks if someone from Apple read my post.
Many thanks if someone help me.

But who has to make another unlock? Orange told me that for them is ok and the phone is unlocked. I read on other pages that Apple has a world-database with Imei numbers. So seems Apple can also do the unlock, even for the fact that they returned me a locked phone, different from the one I sent them. The warranty is with Apple, I forgot to warite in my first post that first of all on Janauary I went to Orange shop where I bought the iPhone but they told me for every problem is Apple that has to solve.

GL Open Item does not appear in F-03

Hi Friends,
I am trying to clear the GL open items thru F-03, while I see all the open items that appear in Line item display through FBL3N (total 25), out of them only 24 appear in F-03, I can not see the 25th item.
I have checked the document in BSIS table, it appears as open item there. The FBL3N also shows this open item.
What could be the reason that when going for Clearing thru F-03, it does not appear.
Best Regards
VK

- Check some table fields in the missing documents using Transaction SE16. The following conditions must exist for the missing document numbers in question -
BSIS-XOPVW = X (Indicator: Open item management, only for G/L accounts)
BSEG-XOPVW = X (Indicator: Open item management)
BSEG-AUGBL = space (clearing document number)
BSEG-DISBN = space (discount document number)
BKPF-BSTAT = space (document status)
BKPF-XSTOV = space (indicator reversal flag)
REGUS/REGUP -> see below
- Check Note 136754 - F-03, F-32, F-44, F-28 missing open items (link below)
[Note 136754 - F-03, F-32, F-44, F-28 missing open items|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=136754]
Rgds.

Standard New button for creation of bp is not appeared in ic agent bp role's main page.

I have checked in.htm page of ICCMP_BP_MUL_S/BuPaSearchB2B which is getting called in web.
in line no. 45 of .htm page there is condition to check whether new button should be displayed or not, when this condition is true no_bp_create is initial then only new button appears in ic agent.
I have debugged so many times but unable to find out from where no_bp_create flag is populated and in conclusion new button is not appeared .
I think there is some authorization which should be assigned to user for creation of bp so that above said flag (no_bp_create) is not getting populated.
if i am on right track so please let me know which authorization is to be assigned to user so that user can see new button in ic_agent.

Hi Sunny,
The parameter no_bp_create is being set in the do_init_context method of the view controller class of same view but the value is being fetched using a badi.
The authorization to create BP can be enabled by implementing the BADI BADI_CRM_BP_UIU_AUTHORITY (or enhancement spot CRM_UIU_BP_ENHANCEMENT).
Users can be authorized to create/edit data for different UI components using this badi.
In this badi put the condition for the application name may be as (based on your scenario or explore more) cl_crm_ic_bp_constants=>gc_bp_create OR OR cl_crm_ic_bp_constants=>gc_bp_edit and set the value of parameter cv_not_allowed = abap_false. Then you should be able to see the New button.
Regards,
Shobhit

HT1386 Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. J

Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>

Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?

Error FF753 Tax code 01 not appear in any G/L account item with FM Active

Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
Sandeep

Hi:
          If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
    1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
    2. The tax code is transferred into all conditions, for which
    the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
    the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
    the condition is not statistical (if it is no invoice list condition),
    the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
    1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
    the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
    the condition is not statistical (if it is no invoice list condition).
    the condition is not a tax condition.
    2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
    1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
    2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
    3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
    4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards

Reply and forward icons not appearing in mail app when I respond/forward from Gmail

When I reply or forward an email within the iphone mail app, the arrow icons showing I replied or forwarded appear beside the email in my iphone mail app inbox.
When I reply or forward from gmail, these icons do not appear in my iphone mail app. Does show that I have read and flagging/unflagging works.
Any thoughts?

Close out of the mail app, double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then check your mail again.

Orange flag not appearing

Similar Messages

Maybe you are looking for