Flare Like Spot In Corner of Some Images

I have a Canon 5D Mk. III and a Canon 24-70mm L series lens. Have had the camera for a few months, love it so far. Was shooting a model today and had a weird issue. After the shoot, was uploading the pictures and notices images that we shot near the end of the day had this weird flare like spot or bloom in the bottom left corner. Only showed up sometimes, and only when I shot portrait style, not landscape style. Showed up sometimes, didn't show up other times. Thought it was a flare but we were shooting in the shade and it showed up mulitiple times and different locations but on the same left corner every time. Is it a spot on the sensor? Smudge on the lens? Internal light leak? Very confused. Attached a few pictures, hopefully someone can help.

saadhameed wrote:
I have a Canon 5D Mk. III and a Canon 24-70mm L series lens. Have had the camera for a few months, love it so far. Was shooting a model today and had a weird issue. After the shoot, was uploading the pictures and notices images that we shot near the end of the day had this weird flare like spot or bloom in the bottom left corner. Only showed up sometimes, and only when I shot portrait style, not landscape style. Showed up sometimes, didn't show up other times. Thought it was a flare but we were shooting in the shade and it showed up mulitiple times and different locations but on the same left corner every time. Is it a spot on the sensor? Smudge on the lens? Internal light leak? Very confused. Attached a few pictures, hopefully someone can help.
You've got better eyesight than I have, I guess. I don't see anything flare-like in any of the pictures. The third has a pinkish formation in the lower left corner, but it's about as oof as its surroundings and could easily be interpreted as just an object in the background (inside a passing automobile?). All flare spots I've ever seen were much more clearly defined than anything I can see here.
I assume you were able to see the spots in the RAW images and not just in the converted JPEGs?
Bob
Boston, Massachusetts USA

Similar Messages

Why does my iPad have yellow like spots on the screen when the screen is on dark images.?

When I open dark images, my iPad has this yellow like spots around the screen next to the bezel. It only happens when there is a dark screen like for instance when a YouTube video is loadeding or when I have dark pictures. Is this normal.? Or should I take it to the Apple Store.?

first of all was your ipad dropped on a hard floor or something if not then you should just take it to apple as that is not normal you should probably get the device replaced

Why do I get Colored bands on some images in LR4 and LR5, but not in Aperture?

On some images -- both RAW and JPG -- when opened in LR4 or LR5, there will be one or two "curved" color abberation lines across the entire image. This doesn't occur when I open the images in Aperture. Any idea why? Thanks

>Is it possible that Aperture is showing you the camera-embedded JPG by default? What happens if you actually produce a JPG from the raw file in Aperture?
Aperture works the same way as Lightroom in this respect. It will first show you the embedded jpeg and will render a new conversion from the raw data as soon as it can. So it is possible the OP saw the embedded jpeg, but that should not last long and certainly by now should have been replaced with a newly rendered preview. Either Aperture is more forgiving of a small defect in the raw file or Lightroom import is somehow getting corrupt files of the sd card and Aperture not (would be weird). Another option is that the camera raw cache is corrupt. This can be checked by emptying the cache (Preferences->File Handling->Purge Cache). Lastly, this might be a corrupt preview in Lightroom. Check this by zooming 1:1 on an offending area in the Develop module and seeing if it goes away.
>I suspect that the curvature is in fact due to lens corrections, and that these lens corrections are always on
I believe you are right. I remember vaguely that there is some default lens correction with some cameras like this that is independent of the lens correction module. No clue whether the LX7 is one.

Some images not showing on ipad when book is previewed

When I preview the book in progress, some images only appear in the thumbnails, not on the full page view. These same images were showing up a few versions ago. Other images are showing up just fine.

Hi KT and Anyone Else Who Could Help,
One thing I noticed is the images that are not showing up are all captioned, but with background shut off. I have a few image galleries as well, but those ARE showing up.
Some images are jpegs, others are pngs, but there is no pattern or correlation between image type and showing up, not showing up.
Besides, they all showed up previously.
So I removed the caption from one image and now it is showing up!
But I am nearly certain that in an earlier version WITH captions, they all showed, and I would like to keep the captions.
Any ideas?
Thanks so much!
Belinda

I have just bought a hdmi tv and would like to view very high quality images, using apple tv, stored on my external hard drive. I also have blue ray movies stored on my external hd. will i be able to stream these to my tv and view them in 1080p?

I have just bought a hdmi tv and would like to view very high quality images, using apple tv, stored on my external hard drive. I also have blue ray movies stored on my external hd. will i be able to stream these to my tv and view them in 1080p?

sorry, why isn't correct?
i try convert video with quick time to apple tv, import in itunes( that's ok) but is impossible to synchronize my apple tv ( unsupported file).
where I wrong?
please could you explain me the correct procedure?
i have some video ( holiday movie an photo movie in mpeg2 full HD) to convert for apple tv, and from 2 years some video editing with imovie.
normally I prepare my video with Imovie, create a file .mov full hd (like master) and with roxio convert file for apple TV.
apple world is new for me, after 25 years with microsoft!
thank so much
mauro

Errors in Export to PDF for web use - some images are lost when PDF is enlarged & in browser

I have a multi-page PDF in InDesign CS6 that I want to export to view on the web. I need the file to stay under 2MB, and I need it to be crisp and nice enough to read the type on the page (as small as 9pt type).
The errors that are occurring are the following:
On some browsers, some images will entirely not show up. Some of the missing images have been pasted into the document, some placed. I cannot think of a correlation.
When the PDF is enlarged (Adobe Acrobat X 10.1.10) to more than ~200%, there is one placed image that will mostly disappear. What I mean by "mostly" is that little bits of it are still visible, like I masked it carelessly or something. Since this is only occurring with one image it seems that it would be a problem with the image itself, yes? I'm all ears if I'm making a mistake. It is a placed .ai file with no link errors. Should I not be placing directly from illustrator? It renders wonderfully from 100% all the way up to 188%, and then if you enlarge by margins of 1% little bits of it disappear, almost a chunk at a time.
The way I've been exporting is:
File > Export > Adobe PDF (Print)
Adobe PDF Preset: Smallest File Size
Standard: None
Compatinility: Acrobat 6 (PDF 1.5)
Options: Optimize for Fast Web View
Export Layers: Visible & Printable Layers
Compression
I always change the downsampling from [100/150] to [150/225]. I usually leave the JPG image quality low. I leave both bottom boxes checked (compress text and line art, crop image data to frames)
Output
Color Conversion: convert to destination
Destination: sRGB 1EC61966-2.1
Profile Inclusion Policy: Include Destination Profile
However, after reading a few other forum questions I started trying to export as Acrobat 4 so that it would flatten. When I do that, problem #2 still persists although I didn't test problem #1. I haven't tried using Distiller, and using the "prepare for web publishing" action within Acrobat itself makes the PDF too artifacted.
At the heart of my question is this: I am a young designer at an old company that is not necessarily keeping up with the times. I REALLY want to know what the best, most efficient way to export a pdf for web viewing is. Does this exist in InDesign, outside of InDesign? Does it exist at all? Tell me what I'm doing wrong so that I can get better!
Thank you in advance.

Show Large Images is a preference inside of Acrobat which might be disabled.
Acrobat - File > Preferences

Bridge not displaying SOME images

Hi, stumped on a problem I am having with Bridge CS4. Some images are not showing up at all. I know they are in the folder since I can see them in Windows Explorer or if I naviagate to the folder when placing files in InDesign or Illustrator. All the images are the same file types (tif, jpeg, psd, png) as the other files I CAN see. Have tried refreshing, clearing cache, restarting, etc. but this has been ongoing for a while. Any suggestions would be appreciated!

I see nothing at all. For example, I have images A1, A2, A3, A4, A5 that exist in the folder. In Bridge, I only see A1, A3, A4. It seems random what images are not appearing. I should also add that my counterpart that sits in next cube over CAN see all the images in Bridge.
Dan Jackson
Marketing Specialist | Auer Steel & Heating Supply Co.
Direct: 763.450.9249
Like us on:
<http://www.facebook.com/pages/Auer-Steel-Heating-Supply-Company/185497081490925

Hue saturation doesn't work on some images.

My hue and saturation doesn't work on some images.

Apologies for the brief and cryptic question. Frustration.
This is a TIFF file. Originally it was a RAW image that had a preset applied in ACR, then a black and white preset layer added. Then a couple small edits with contrast, plus an unsharp mask and high pass, completed with the flattening of the image and finally saved as a TIFF.
I believe it may have been the flattening, but when I close the image and reopen it it only has one layer. I can go in and edit this reopened image in a new brightness/contrast layer, but hue/contrast seems dead. Unless I colorize the image.
I have a hue/contrast preset I like to use as well, and if I add that preset when the TIFF is reopened hue and saturation can be manipulated.
Your question is exactly the one I have been asking. Any help would be appreciated. Thanks for your initial response.

I am planning to send some images to Alamy they need them as 24MB images how do I know when they are

Good morning I have submitted some images to Alamy and they like them, which is a great start, they need a Jpeg file size of over 24MB when uncompressed. Opening a JPG in an image program such as Adobe Photoshop will show you the uncompressed (open) file size, I have no idea how to proceed can you help please, many thanks
Kind regards
Sheila

Hi Sheila
A 24Mb JPG is a bit of a strange thing to ask for, but image size, vs resolution vs dpi vs size on disk vs size when open in Photoshop, is something that seems to cause more confusion than almost any other subject on this forum, and at my camera club, and I dare say, in the editorial office at Alamy - or at least at the desk of their new trainee who is doing work experience while waiting to go to uni.
I had not heard of Alamy, but they were easy to find, and as you'd expect, they have a page with guide lines on how to submit images
http://www.alamy.com/contributor/help/prepare-images.asp
Bottom line is to give them full resolution high quality JPGs (10 or more). They just say RGB, so play safe and make it sRGB.
BTW I had to laugh at the arbitrary way they list 'unsuitable' cameras.
http://www.alamy.com/contributor/help/unsuitable-camera-list.asp?cname=Canon
And nothing about iPhones!
BTW This answer has sat waiting in a Word document after the site went down just as I was in the process of posting it. Nice to see it back on line, but now I have to gou for the evening.

Some images don't transfer from RH8 to the Word output

Why is it that some images don't transfer from the RH8 file to my Word output when I generate?
They do transfer to the Flash Help, but not to Word.
Some of them are small images - just shots of icons or tools - and others are quite a bit larger.
It takes me at least another hour to format the Word document after the output.

Hi Patti,
I have had similar problems of images "softly and suddenly vanishing away" during export from RoboHelp to Word. I never really solved the problem, but I did find some useful tips.
First you shouldn't embed your images; in the Printed Documentation Wizard you should select "Link to sub-directory"
This has the advantage that lost images are now replaced by a small red cross -- easier to find when reviewing.
Next, in Word, try Edit>Links. If you are lucky you will see something like this:
Notice that some links have a Source File of ../Images; they are the ones I was missing. For some reason the path to the image file is moved up one level.
I never found out why, but the workaround was simple: copy the entire Images directory and paste it one level higher in the directory hierarchy. A waste of disk space, to be sure, but it worked. The grabs above show Word2003 and RH8.
Hope this helps,
--- Derek

Safari 2.0.3 - Pages load with no images or some images

Hi
I just bought a new iMac Intel. It comes with safari 2.0.3
Any page on the web loads without the images. In place of the image is a ? icon.
If I hit the reload button a few times, the images load up. Sometimes even after a dew reloads, some images are still not loaded.
Any idea why this is happening?
Thanks in advance for any assistance.

I have not changed any of the Quicktime settings yet.
Since posting I have installed Firefox. Firefox loads the page www.apple.com flawlessly.
If you would like me to check any of the quicktime settings, can you give me more details on how to do this?
Thanks for your advice

'Some images are missing because they were deleted from the document'

Hi,
I created a document in Pages v5.2 last week and have just opened it and received the following message:
'Some images are missing because they were deleted from the document'
When I try and replace the missing images I get the following message:
'The image "filename" couldn't be inserted.'
When I try and reimport the original image I get the following message:
'The image "filename" couldn't be inserted. This image is of an unsupported type.'
If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
If I insert the original image into a blank Pages document it goes in no problem.
I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
Alex

I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
Toolbar > Media insert
Insert > Choose jpg into document
Text Box image fill
Shape image fill

Some images are not appeared on the JButton

Hi all
I want to appear an ImageIcon on my JButton
Some images are appeared on the button when run the code,
but some images are not and the button appeared as a default
button why ?
the problem in my code in this statement
JButton   merc = new JButton (new ImageIcon(" door.jpg " ));Thanks in advance.

I suggest that you break down your statements even further to see where the problem is.
So if this the problem is on this line:
JButton   merc = new JButton (new ImageIcon("door.jpg" )); //string corrected?try to break it up a bit like so:
JButton merc = new JButton();
File imageFile = new File("door.jpg");
if (imageFile.exists())
   ImageIcon icon = new ImageIcon(imageFile);
   if (icon != null)
      merc.setIcon(icon);
   else
      System.out.println("icon == null");
else
   System.out.println("image file doesn't exist");
}

SOME images not downloading on ANY iPod Touch browser

SOME images from SOME websites are not downloading on ANY browser my iPod has on ANY wireless network.
I have an 8gb iPod Touch 2nd gen, and iTunes 9.1.
I went to vector.tutsplus.com to read some articles like I usually do and most of the images were loading except the images that are actually in the article inline. I figured it was just a safari glitch so I opened up my Opera browser for iPhone. I still couldn't see the images, so I figured it was just my Internet connection. I hopped onto another Wifi connection in my neighborhood and went to the website but the images would STILL not load. They load fine on my computer. Other resides are doing the same thing. It's really hard to read tutorials and articles on graphics design when I can't see images.

I tried pinging some hosts of the images that won't load on my PC here at the office and I can ping the servers with no problem.
When I ping the same servers on my Mac through Terminal, I get "ping: sendto: No route to host"

Some images do not appear in Nokia browser. 5630, ...

Hi 2 all,
I've got a problem with some images that do not showing up in Nokia browser. This is a major problem that randomly occurs with different Nokia handsets.
Please check the .html page in the attachment.
If you open the page in PC browser, you'll see "border" image, but if it's opened on Nokia 5630 (or E71, N95) page is blank.
It would be great if you could suggest any workaround for this.
Nokia 5630
OS v. 012.020
Custom v. 012.020.C04.01
Thanks in advance
Attachments:
page.zip ‏16 KB

Sorry, I didn't make myself clear. I'm using a new Wordpress theme that is meant to be responsive. The large image is for a header, than you scroll down to see the rest, one by one. Some one the pages work OK on my iPad, typically the old ones where the maximum image size was 500 x 500. It's the new pages and those I've updated that are causing the problem. On the iPad the large image loads, then a couple of the small ones become visible as I scroll down, but then darkness (rather like my knowledge level).
Being new to IOS and iPads, I'm trying to work out whether I should be looking here, or amongst the Wordpress stuff for a solution.
Here's the website with its new theme: http://www.new-zealand-pictures.com/

Flare Like Spot In Corner of Some Images

Similar Messages

Maybe you are looking for