Flash 8 display 'jumping text' Bug after Blur filter

I think I found a display bug/glitch with blur effect in
Flash 8.
(I'm using the MC TWEEN actionscript method.)
I need to apply a blur filter to a Movieclip with dynamic
text.
When scrolling this Movieclip the text 'jumps' about causing
visual glitch
and a slow down...
I have tweened the blur filter back to 0 and I have also set
Movieclip.filters=[];
Has anyone else experienced this problem? Is there a fix?
Thanks,
David

mtaylor wrote:
> I see what's happening. It appears to be a width issue.
The underlines had
> been set to "hairline" but when they converted over to
Flash 8, the width value
> disappeared. Once I manually re-added the width value,
everything worked.
> Strange.
If this problem is reproducible, than submit to a bug list at
www.adobe.com/go/wish
Perhaps could be eliminated in future release.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Flash Wont Display and other bugs

As far as the flash thing is concerned i am going to try installing flash 7/8 as i believe that flash 9 does'nt work with the latest safari.
However i also have another problem, on the same page that the flash objects don't display there are small diamonds with question marks inside the diamond throughout my script. For instance the £ sign is replaced by one of these diamonds.
Any advice would be helpful although i have'nt installed flash 7/8 yet to see if this solves the flash object problem. apart from that im using the latest safari and flash.

whoops, my mistake, yes it does work fine. I have installed and uninstalled differnt versions of flash and shockwave all day today and most of yesterday.
THE PROBLEM
I moved the script some time back but neglected to change the src path. sorry and thanks a lot for at least getting me going in the right direction which ended up solving the issue. THANKS.
DOAH, How stupid do i feel.?

Sapscript - displaying two text fields after truncating the spaces.

Hi Friends,
In a sapscript, I have to display the name of the vendor which is in two different fields each of length 40 chars. The first one may be filled to the maximum and the remaining goes into the second field and may occupy only 30 or 35 chars. I need to display the two side by side and the space available is 70 chars. I am using an existing script and I am not able to print the two side by side. It is going to the next line. How do I truncate the trailing spaces of either field. Please help. It is quite urgent.
Thanks,
BP.

Hi Bindu,
use the perform to concatenate name1 and name2 to NAME and use this field in address command.
Check with the following code:
/:   DEFINE &ZNAME& = ''
PERFORM ADDRESS IN PROGRAM 'PROGRAM'
USING    &REGUH-ZNME1&
USING    &REGUH-ZNME2&
CHANGING &ZNAME&
ENDPERFORM
FORM address
          TABLES itab STRUCTURE itcsy
                 otab STRUCTURE itcsy.
LOOP AT itab.
    CASE itab-name.
      WHEN 'REGUH-ZNME1'.
        l_name1 = itab-value.
      WHEN 'REGUH-ZNME2'.
        l_name2 = itab-value.
    ENDCASE.
ENDLOOP.
use the logic.
Endform.

How to display medium text for 0FISCPER in Filter area.

Hi,
I am having a problem with display of filter values in bex query. In filter section, there is 0FISCPER used. after running query I can see only "JAN" value.
But user wants to see "January 2007" in place of JAN.
though 0FISCPER info object has text table T009C. it has two colomns one for short text and one for medium text. and data in table is stored as below -
Year     Period     Sh.text      Med. text
2007      001        JAN          January 2007.
2007      002        FEB          february 2007
In query, 0FISCPER is taking only Short text for an display settings. While it should take Medium text.
How can I solve this problem ??
[email protected]

Hi,
    In your Infoobject, choose BEx Explorer tab, Check what selected for BEx Description, there choose Medium text instead of Short text.
   Hope this sill be helpfull
rgrds,
V.sen

Display medium text in a 'set filter' box

I have a hierarchy and populated all levels of text(small, medium, and long). We want to display the medium text when reporting. I have made all the required changes to display the medium text of the hierarchy for reporting. That works great! However, when you hit the 'set filter value', the filter box shows the hierarchy with the small text. Is there a way to change the text display for the filter box?
Thanks,
Matt

Take a look at the following thread:
F4 help - Search values - I need key and text
Hope this helps...
Bob

Set current record after dataset filter or sort

How do you set the current record as the first record after a
filter or sort? I have multiple dataset filters and sorts on the
page and the current record always remains the first record after
using them. Is there a way to force the current(viewed product,
picture or whatever) to the first record after the Filter has been
completed?

thanks for your help,
I was wanting the latter, "Or were you asking how to make the
first row of the filtered data selected?" After the filter runs I
want the current record set (to be displayed) to the first record
in the filtered data.
I am using the non-destructive filter method filter(), so I
dont have to reload the data to bring the dataset back to original
data, I can provide a reset button or set back to all records
button.
What I am using this for is a Home/Standard Plan Catalog. I
want to filter our plans by square footage, number of bedrooms or
baths, garage size, etc. so initalally it loads the complete
catalog. the user selects the square footage range they want or any
combination of specs and the filter works to narrow the dataset to
the appropriate records. The filter works fine it returns the
correct records from the dataset but after the filter I want the
current (displayed) record to change after the filter, to the first
record in the newly filtered data.
Eventually we are going to have all 200 or so standard plans
we have in the dataset and giving the user the ability to filter by
these specs is the ultimate goal to help our customers make
decisions. The page loads thumbnails of the exterior renderings for
each standard plan. they click the thumbnail and it opens. With 200
or so eventully I will have to page the results of the dataset or
something else eventually, but I will cross that bridge when I get
too it.
here is my filter:
>>>>>>>>
function StartFilterTimerALL(){
if (StartFilterTimerALL.timerID)
clearTimeout(StartFilterTimerALL.timerID);
StartFilterTimerALL.timerID = setTimeout(function() {
StartFilterTimerALL.timerID = null; FilterDataALL(); }, 100);
function FilterDataALL(){
var SqFtVal = document.getElementById("sqft").value;
if (!SqFtVal){
dsStandards.filter(null);
return;
// for each value get the matching records sqftage
if (SqFtVal == 1){
var filterFunc = function(ds, row, rowNumber){
var str = row["sqftage"];
if (str < 1000)
return row;
return null;
dsStandards.filter(filterFunc);
if (SqFtVal == 2){
var filterFunc2 = function(ds, row, rowNumber){
var str = row["sqftage"];
if ((str > 1000) && (str < 1501))
return row;
return null;
dsStandards.filter(filterFunc2);
if (SqFtVal == 3){
var filterFunc3 = function(ds, row, rowNumber){
var str = row["sqftage"];
if ((str > 1500) && (str < 2001))
return row;
return null;
dsStandards.filter(filterFunc3);
if (SqFtVal == 4){
var filterFunc4 = function(ds, row, rowNumber){
var str = row["sqftage"];
if ((str > 2000) && (str < 2501))
return row;
return null;
dsStandards.filter(filterFunc4);
if (SqFtVal == 5){
var filterFunc5 = function(ds, row, rowNumber){
var str = row["sqftage"];
if ((str > 2500))
return row;
return null;
dsStandards.filter(filterFunc5);
thanks Jim

How to display a percentage sign ( % ) after a text box in a screen

hi experts,
Can anybody tell me how to display a percentage sign ( % ) after a text box in a screen.

Hi Ajay,
Try to use the [Position|http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dba7e235c111d1829f0000e829fbfe/frameset.htm] option of selection screen.
By using this you can place the text as a comment at a desired position on the selection screen.
The syntax would be like this :
SELECTION-SCREEN POSITION <pos>.
Regards,
Swapna.

After ALV Report i need to display the text below that

Hi Experts,
I need a help.
I want to display a write statment after alv report is generated.pls help me.
Please Urgent.

here is an example
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'
            i_callback_html_end_of_list = 'END_OF_LIST_HTML'
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
*&      Form end_of_list_html
      output at the end of the list - not in printed output       *
FORM end_of_list_html USING end TYPE REF TO cl_dd_document.
DATA: ls_text TYPE sdydo_text_element,
        l_grid     TYPE REF TO cl_gui_alv_grid,
        f(14) TYPE c VALUE 'SET_ROW_HEIGHT'.
ls_text = 'Footer title'.
adds and icon (red triangle)
CALL METHOD end->add_icon
    EXPORTING
      sap_icon = 'ICON_MESSAGE_ERROR_SMALL'.
adds test (via variable)
CALL METHOD end->add_text
    EXPORTING
      text         = ls_text
      sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Bold text'
      sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(normal)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Normal text'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Yellow triangle'
      sap_emphasis = 'strong'.
adds and icon (yellow triangle)
CALL METHOD end->add_icon
    EXPORTING
      sap_icon = 'ICON_LED_YELLOW'.
display text(normal)
CALL METHOD end->add_text
    EXPORTING
      text         = 'More text'.
*set height of this section
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = l_grid.
CALL METHOD l_grid->parent->parent->(f)
    EXPORTING
      id     = 3
      height = 14.
ENDFORM. "end_of_list_html.

[svn:fx-trunk] 5831: Fix bug Fix SDK-19800 FxButton doesnt resize itself to display all text when lineBreak == toFit

Revision: 5831
Author: [email protected]
Date: 2009-03-31 16:50:47 -0700 (Tue, 31 Mar 2009)
Log Message:
Fix bug Fix SDK-19800 FxButton doesnt resize itself to display all text when lineBreak == toFit
Fix: implement text reflow support for TextGraphicelement.
QE Notes: None
Doc Notes:
Bugs: SDK-19800
Reviewer: Carol, Gordon
tests: checkintests, mustella
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19800
http://bugs.adobe.com/jira/browse/SDK-19800
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/supportClasses/TextGraphicE lement.as

BUG: Sandisk USB flash drive in "half-mounted" state after wake from sleep

My Sandisk Cruzer Crossfire 4GB Flash Drive is left in a half-mounted state after wake from sleep. The Finder believes the drive is still mounted, the icon is on the Desktop. However opening a file on the drive, or trying to eject the drive, results in a long beach ball, followed by a message that I removed the drive without Ejecting it first. The same drive continues to work fine on my Tiger machine, and on PCs.
Bug Report:
Setup:
Macbook 1st Gen (2.0 Ghz)
Mac OS X Leopard 10.5 Clean Install
Sandisk Cruzer Crossfire 4GB USB Flash Drive (in either port)
Repro:
Plug in the drive.
Close the MacBook to put it to sleep
Reopen the MacBook
Result:
The lights on the flash drive never light back up after wake from sleep. Navigating the drive, or trying to eject it results in a "you removed the device without ejecting it first" message.
Expected:
Drive should still be mounted and accessible after waking back up.

It may be a design flaw in the device. Mac OS X does a lot more power management than most other OSes, including tearing devices down to little or no power during sleep. It is possible that the device simply misbehaves due to corrupted memory state or reports a substantially different GUID or something similarly bizarre upon wake. (Okay, that last one wouldn't technically be a power management issue....)
If it doesn't have any problems except when sleeping the system, I would just make sure I unmounted it before putting the machine to sleep and wouldn't worry about it. Maybe check with Sandisk to see if they have a firmware updater for the device.

I can't enter any value in the Text field, after loading flash files

Hi to all,
In my Java application, I'm using a text field and a panel to load flash files. I'm using JDIC 0.9.1 to load the flash files in the panel. The flash files are created by Flash CS4.
While running the application, I can't enter any value in the Text field, after minimize and maximize the application I can enter the values.
This problem happens after change the jre version from 1.6 to 1.7.
I'm getting the following exception while running the application.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNati ve(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unkn own Source)
pls give me a solution.
Thanks in advance...:)

I can't enter any values in JTextField after loading the flash files., locking.

Displaying file from text item after browsing

hi, how would i display the directory of the file in the text item after i browsed it in windows?
thanks,
Majic

This works...
DECLARE
filename VARCHAR2 (200);
BEGIN
:SYSTEM.message_level := 25;
filename :=
GET_FILE_NAME (directory_name => 'D:\My STAFF\My Pictures\',
file_filter => 'jpg'
:block3.text_item4:=filename;
IF NOT FORM_SUCCESS
THEN
MESSAGE ('Unable to read file(The problem may be the format ) "' || filename || '"');
RAISE form_trigger_failure;
END IF;
:SYSTEM.message_level := 0;
END;
Just simplify little bit the code....
Greets

Can you display some text after you have checked a yes or no box?

Can you display some text after you have checked a yes or no box?
Ex:
Yes (Please contact Bob x3-1234) only want it to appear when you check box)
No

Sure. If you use a field (button, text field) to display the text, the Mouse Up script of the Yes check box could be:
getField("button1").display = event.target.value === "Yes" ? display.visible : display.hidden;
Change "button1" to the actual name of the field and "Yes" is the export value of the Yes check box. You can use whatever you want, and you'll probably want to make the button read-only as well.

Flash player display bug on windows 8.1

Hello i just install my new PC and I have a problem with online flash games
http://i.imgur.com/Jcn32Cm.png
So on this picture you can see on the same game, on the left firefox, small frame and on the right chrome with a normal frame
Here is the link http://www.carapass.com/
I need help, I reinstall firefox and flash player too, and the bug is steal here ...

You may have zoomed the page(s) by accident.<br>Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Command+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can also try to right-click the Flash object area to see if you can zoom out.
You can try to clear the Flash local storage and settings for this site.
*Windows Control Panel > Flash Player > Storage: Local Storage Settings
**Remove a specific domain: Local Storage Settings by site
**Remove all domains: Delete All and Delete Data
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

Flash movie display issues in IE

Hi Everyone!
This message is a cross-post and I apologize, but there seems
to be more traffic in this forum and I really could use some input
on my question. Here goes:
I'm new to this forum, but have a little experience with
Flash. I'm building a site, mixing flash with css and html on a
webpage (obviously). When I test the pages in Internet Explorer,
the display jumps around quite a bit when I navigate between web
pages (looks fine when clicking through frames in the movies). This
is the first time I've ever seen this (in the few times I've built
flash-heavy sites) and this display issue doesn't happen in
Firefox, Opera or even old Netscape. Unfortunately - most of the
world is using IE, so I need a little help.
I thought perhaps the Flash Satay solution might be the
answer, but I'm not a handy programmer so before I go mucking
around with it, I thought I'd get some thoughts from other flash
users...
Here's the link: mustardseedwoodworking.com/testing The pages
in question (and the only ones that are working, really) are the
home page, the about page, and then galleries one and two.
(Oh finally, I'm viewing these pages both locally, on my
computer and online after being uploaded. I have cable internet
access. I realize Gallery 2 loads a bit more slowly than Gallery 1,
but the primary reason I'm using flash to display the tables is
because I want large, high rez photos. )
Thanks in advance!
Michelle

Did you upload the Scripts folder that DW places in the root
of your site?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Dunk11" <[email protected]> wrote in
message
news:eavmev$olm$[email protected]..
>I need some help getting Internet Explorer to show my
flash movie.
>Everything
> looks fine in FireFox, but when I test it in IE my
movies will not load.
> I can
> however go directly to the .swf file in IE and it will
load. But when I
> try to
> view in on the actual webpage it will not. Here is the
link
>
http://www.duncanandthompson.com/test/test.htm
> Thanks
>

Flash 8 display 'jumping text' Bug after Blur filter

Similar Messages

Maybe you are looking for