Flash file is covering my drop down menu
please help. I've created a horizontal drop down navigation
in fireworks 8 and imported it into dreamweaver mx - i also have a
flash file just under my navigation. my problem is that when i view
my html document my my flash file is covering up my drop down menu.
Any advice??? Thanks in advance!
All Active content on a page will always rise to the top, so
to speak,
including Flash, certain form elements, Java applets, and
Active X controls.
This means that each of these will poke through layers. There
is not a good
cross-browser/platform reliable way to solve this issue, but
if you can be
confident in your visitors using IE 5+ or NN6+, then you can
use the Flash
wmode parameter (however, Safari does not support this
properly!).
Adobe articles:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"holhoz" <[email protected]> wrote in
message
news:f9obm8$jii$[email protected]..
> please help. I've created a horizontal drop down
navigation in fireworks 8
> and
> imported it into dreamweaver mx - i also have a flash
file just under my
> navigation. my problem is that when i view my html
document my my flash
> file is
> covering up my drop down menu. Any advice??? Thanks in
advance!
>
Similar Messages
-
Slideshow is covering over drop-down menu
Dears ,
I am use this slideshow within my application
http://themes.themepunch.com/?theme=kenburner_jq
and this the slide source
http://theexecutivetowers.info/i/KB/slider.zip
and use this CSS menu
http://cssmenumaker.com/menu/red-grey-rough-drop-down-menu
and this the css menu source code
http://cssmenumaker.com/sites/default/files/menu/138/source.zip
after working the Slideshow is covering over drop-down menu .
please someone help me , if you want to see in action
https://www.youtube.com/watch?v=-HH7wUhP1tk&feature=plcp
AhmedDears ,
thank you it's working , just i add in menu css
z-index:1000;Ahmed -
DWT file not updating with drop-down menu edits rom Fireworks
Aughh! I am almost done with my website, when I go back to
Fireworks and add a couple new tabs on a drop-down menu. I update
the DWT file in Dreamweaver, but one of two things happens: either
the update simply doesn't "take", or all of the <body>
section is mysteriously deleted from the DWT file. If I preview the
Fireworks template (from Fireworks), everything is as it should be,
but not when I preview in Dreamweaver. Not sure if this is a
Fireworks issue or a Dreamweaver so I've posted in both. No one in
the FIreworks forum has come up with any suggestions yet.
What the hell?
Thanks in advance for the help,
Brian>so I've posted in both
Can't see anything here over at the newsgroup - did you
forget or not post
in such a way it doesn't show?
Please provide a URL.
Jo
"_Lost_Boy" <[email protected]> wrote in
message
news:ga4i6l$cht$[email protected]..
> Aughh! I am almost done with my website, when I go back
to Fireworks and
> add a
> couple new tabs on a drop-down menu. I update the DWT
file in Dreamweaver,
> but
> one of two things happens: either the update simply
doesn't "take", or all
> of
> the <body> section is mysteriously deleted from
the DWT file. If I preview
> the
> Fireworks template (from Fireworks), everything is as it
should be, but
> not
> when I preview in Dreamweaver. Not sure if this is a
Fireworks issue or a
> Dreamweaver so I've posted in both. No one in the
FIreworks forum has
> come up
> with any suggestions yet.
>
> What the hell?
>
> Thanks in advance for the help,
> Brian
> -
Drop down menu in front of Flash
I've read dozens of posts on this topics and the answers are always the same: add this tag to the parameter section of your Flash code: <param name="wmode" value="transparent"> and add this to your embed tag: mode="transparent". But it simply doesn't work in IE. Please view www.beidun.com to see.
Any other suggestions at all? I'm ready to tear my hair out.On the <embed> tag, you have this:
<embed src="entry.swf" mode="transparent" quality="high"...
It should be this:
<embed src="entry.swf" wmode="transparent" quality="high"...
Now look for the AC code, right above your object tag. It starts like this:
<script type="text/javascript">
AC_FL_RunContent( 'codebase'...
insert this directly before the 'width':
'wmode','opaque',
This should take care of the problem so that the swf file is behind the drop-down menu.
Now you have another problem with the drop-down menu not working at all in IE6. This is a separate problem from the swf file problem we just resolved. I looked at your code and it is a classic example why we design with css instead of tables and tables nested inside tables. It would take someone hours to wade through all that clutter and figure out where to begin. This is not a complicated layout; my advice is to redesign the page using css. -
Problems with flash transparent drop down menu over html in some browsers
Hi everyone... this is my first post and it's about an issue
that's causing me a few problems.
I'm currently designing/ building my company's web site, the
test page be viewed here: www.musflashtv.com/test.htm
1) This layout contains an embeded flash movie (.swf) with a
transparent background, this is the main navigation.
The flash navigation has a drop down menu that animates down
and covers the html page (containing links) below.
The problem is that in most current browsers such as; Firefox
2.0.05 (links below template don't work), Netscape 8.1.3
(navigation drop down and links don't work) and Opera 9.10 (links
below template don't work), any links just below the 'invisible'
transparent area coverd by the navigation can't be clicked 'through
the flash file'. The exception is IE 7.0, everything is fine there.
(it hasn't been tested in any mac browsers though).
Because the area below the navigation on
www.kitachi.info/work is one large dummy jpeg file, the link below
would be a much better example to look at.
http://www.musflashtv.com/shows/ind...tlight-Sessions
The flash navigation is embedded in the html (tlp) template
file using the code below and aligned using an external style
(.css) sheet, this html code not only embeds the flash movie but it
also tells the browser to display it's background and as
transparent. The flash movie is embedded in a layer that sits above
the table.
3) The flash embed code:
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
name="shows-navigation-tranparent" width="851" height="300"
align="top" class="flash-navigation"
id="shows-navigation-tranparent">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie"
value="flash/navigation-tranparent.swf" />
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="bgcolor" value="#000000" />
<param name="SCALE" value="exactfit" />
<embed src="flash/navigation-tranparent.swf" width="851"
height="300" align="top" quality="high" wmode="transparent"
bgcolor="#000000" name="navigation-tranparent"
allowscriptaccess="sameDomain" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
scale="exactfit" />
</object>
Does anybody know of any code that can solve this problem or
know a different way of creating a flash navigation with a drop
menu that can be embeded over html?
Any help or advice would be greatly appreciated especially as
this issue is holding back progress in a big way.
Thanks in advance guys!
AdieIt's IE-only behaviour as a result of changes Microsoft made
last
year to their browser, regarding how Active Content (Flash,
Quicktime etc)
is handled, after losing a high profile court case.
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2, the fix is already built
into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"swizzle_16" <[email protected]> wrote in
message
news:eqr0ib$48r$[email protected]..
> Help please, I've put together a website using a drop
down menu system
> that
> needs to drop down over a flash animation - I've managed
to get the drop
> downs
> to go in front of the animation using the transparent
tag - but each
> option has
> to be clicked on twice to get the link to work.
>
> Does anyone know how I can change it so the link needs
to be only clicked
> once?
> The drop down menu system I've used is : * AnyLink Drop
Down Menu- ©
> Dynamic
> Drive (www.dynamicdrive.com)
> -
Hi all
I am learning ActionScript 2.0 for about 6 months and I have
created a flash based website. My question is how to allow a drop
down menu to animate outside of a Shockwave files boundaries.
I have seen Flash menus that do this and also I have
seen some banner ads that allow animation to display outside of the
swf file.
Is there any tutorials or information out there that I can
learn, or could somebody give me an idea of what to do. I
understand how to use the Menu component and how to create a
regular drop down menu within the boundaries of a swf file
javono
www.javono.comyou can't visibly animate flash objects outside the stage
boundaries. you can appear to do so using div tags so that's what
you should check. -
NO hand curser in browser, in flash drop down menu???
NO hand curser in browser, in flash drop down menu???
<removed by mod>HI thanks for the reply I do not know you but dude thanks for trying to help, we are down here in Indonesia trying to save the rain forest, we are introducing the use of the coconut palm tree to ues in construction purposes, like flooring, studs etc. anyway enough of that, it will all be in the website if i can get it up, we are not trying to be cheap and do the site our selves but I need to know how to do this stuff so I can edit the site, and I really dig it.
So after all that, when youy say dropdown, I used Flash 4 can I send you the fla. file, if it's not to much trouble????
thank you JF. -
Flash Drop Down Menu Help Needed
I am using this set-up for a drop-down menu:
http://www.flash-menu.net/flash_drop_down_menu/flash_drop_down_menu_component.htm
I'm usign the vertical setup: http://flash-menu.net/flash_drop_down_menu/download_vertical_drop_down_menu_free.htm
I want to put it both on a static html page (for those who do not have FLASH installed), as well as the FLASH site.
This is the site: http://www.miltongordonussenate.com/flash/index.html
I want to put this menu on both the Campaign page, AND the Links page.
I have the seperate parts- the swf file, the html file, and the jscript file. I don't know if I am uploading the seperate files in the wrong place, or if I am just completely off base.
Can someone help me with this, please?Ok, I see several people have looked, but no one has answered.
Is there a better way to do what I want to do? Any help is appreciated! -
The new tab is visible on the the tab bar but clicking on it does not open a new tab.Neither can I open a new tab from the File drop down menu, nor the Ctrl+T method as indicated in the troubleshooting guide.
Un-install the '''''Ask Toolbar''''' which many users have reported causing that problem.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
<br />
<br />
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*Shockwave Flash 10.1 r102
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml -
Hi all,
Here's a hopefully simple question.
I am building an application (i.e. an exe file) from a simple program which use VISA to read and write to a RS-232 com port. When I run it before building the application everything works fine and the VISA resource control, which is a drop down menu, is automatically populated with available com ports. When I run the application on a computer without LabVIEW installed nothing appears in this window. I have made an installer which includes NI LabVIEW Rutime Engine 8.5, NI Measurement & Automation Explorer 4.3 and NI-DAQmx 8.6.1. Is there anything else I need to include? Any specific settings I need to do when I build the exe-file?
I use LabVIEW 8.5.
Thank you.
Solved!
Go to Solution.DAQmx is only for NI DAQ cards so I'm not sure why you installed that. The driver for VISA applications is NI-VISA (surprise!)
Add the NI-VISA run-time to your installer. -
I don't have pdf documents listed as a file type in the drop down applications menu, so cannot handle these. How do I add a file type?
After a little Googling, it looks like B.Media is a content management system from Wave Corporation used for making catalogs. Doubtful you'd be able to license it at less than an enterprise level.
-
While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything. This is becoming incredibly frustrating. It happens at random time and a restart of the computer is all that helps, then with out any notice it starts to do this again. Mac Book Pro i7 2.2 16 GB 1333 Ram, (2) 450GB SSD both internal to machine. At this point I am losing file because I am unable to save in the file type I need. Does anyone out there know how to solve this issue?
Thanks
philI haven't been unify photoshop much in the past month, but I did try your suggestion and it seemed to work for a while. Today when i went to save a document the same thing happened: click on file>save at this point I can not click on save even though it is highlighted. Tryed to use command s that brings up the save dialogue box, but when I try to change file type I again cannot select it from the drop down menu.
-
Drop-down Menu to Open URL for File Download
I am using Adobe Captivate 5.5 and was wondering if it is possible to create a drop-down menu that can be used to open different URLs for file downloads, kind of like the Attachments button Presenter has. Captivate seems to have a dropdown widget available but I can't tell if this would work for this purpose.
Hi Theo
You can use any composition to create a menu with setting for show target on rollover and then link targets to specific pages.
Adobe Muse CC 7.0 Tutorial | Beautiful Graphic Navigation - YouTube
Thanks,
Sanjit -
Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
== This happened ==
Every time Firefox opened
== I just noticed it. It probably happened when I upgraded foxfire.<u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
<u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M
<u>''Windows'' Method 2.</u> Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
<u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
<u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
<u>'''Full Screen mode'''</u>
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]''' -
Combine supported files in acrobat missing in acrobat x pro when I right click drop down menu
combine supported files in acrobat missing in adobe x pro when I right click drop down menu also Convert to Adobe PDF is missing too. The open with & share with options are gone too when I right click files. My computer crashed & I had to have the motherboard replaced. The tech store put some of my programs back on my compter but not sure how or if they did stuff correctly. Need help fixing my problem becasue I use this all the time. Thanks
I'm having the same issue. I got a new PC, insalled Acrobat X pro and when I right click on an Office file, I could not combine or convert Office files to PDF. I upgraded to Acrobat XI and still no fix. I triled to convert or combine office files to PDF from within Acrobat and I get an error message saying "Acrobat does not support the conversion of one or more of your files to PDF. Please remove these files or go to Settings and choose the PDF Portfolio option".
I've tried to convert or combine Office 2003, 2007, 2010 and 2013 files and none work. The weird thing is that the option shows up for Excel .csv files. Even more werid is that I have the PDF tabs showing in the Office applications.
I contacted Adobe support via chat and they were unable to help. I was directed here, so any help would be great.
Thanks.
Maybe you are looking for
-
I need information about basic features before deciding to upgrade
There is very little information on basic iPhoto 11 specifications. Can I upload AVCHD Lite video clips, and will they automatically work in iMovie (like motion JPEG ones do)? Can I easily create and switch among multiple libraries? How will iMovie r
-
How to authenticate AD LDAP user in Oracle ADF login?
Hi All, I have some requirement in ADF web-application.here one simple adf application they want to authenticate with AD LDAP user, and they want to see logged user details from LDAP. for example after user logged in from adf login page, in next page
-
Hi When executing TCode ABST2, the below msg displays: Differences between assets and G/L accts in the balance carried forward Message no. MQ555 Diagnosis Differences occurred in the balance carried forward when comparing asset summary records and G/
-
Project will not play, but video in event library will
Sorry for the quality, it was the quickest setting I could upload. The video explains it pretty well. http://www.youtube.com/watch?v=l2D126H3mGM
-
Hye, i got the problem about this device. I using PCI 6034 E which will connect to SCC 2345 to measure current and voltage. My os is 32 bit Windows XP. First i install this software, my MAX listed the tree of devices & interface which is PCI 6034 E a