Flash.filesystem not accessible
I need to use flash.filesytem package for reading some data from a file. I have installed Adobe AIR in my system but still I am not able to access flash.filesystem package in my program. Could any one please help me out.
A-o-A
have you imported flash.filesytem package into you air application and make sure selected Air as a project type when you create it.
add this import statement into your script if you havent added it allready.
import flash.filesytem;
Similar Messages
-
AIR flash.fileSystem not found
I am trying the create an AIR application and I want to use the flash.fileSystem classes, but when I try:
import flash.fileSystem.*;
it gives me and error that says:
1172: Definition flash.fileSystem could not be found.
How can I use these classes?
Thanks,
StevenI found the problem... The "s" in filesystem isn't supposed to be capitalized. It sould be written:
import flash.filesystem.*; -
I want to check whether a file exists using flash.filesystem. However, in my FB 3, I could not find this library. If you know how to get it, please share your experience. Thanks.
@yu2009,
This will be only available when you are building a Desktop Application using AdobeAir with Flex.
This will be not available for a normal Flex web application.
Thanks,
Bhasker -
Hi,
i just install Flex builder 3, and i want to create files,
but i dont have le pachage flash.filesystem nor class File.
can you please tell me where can found it or where can i
download it?
thanks.Did you tick the radio button for “Desktop
Application” when creating a new project? I don’t have
FB3 but it was shown in this video.
Video -
Using flex4.1, Flash Builder giving error "flash.filesystem::StorageVolume could not be found."
Hi there,
I'm trying to copy some files to Storage Card on a AIR application. Is this possible with the latest version of the AIR SDK (2.0)?
I am developing in Flash Builder. I have downloaded the lastest flex sdk(4.1) and used it.
Flash Builder then recognises the StorageVolume and StorageVolumeInfo classes. However when I then run the app the debugger throws an error on the following line:
LINE:
var volumes:Vector.<StorageVolume> = StorageVolumeInfo.storageVolumeInfo.getStorageVolumes();
Note: I have imported both classes as well.I'v read the article
http://forums.adobe.com/message/2984004#2984004,
and checked my application.xml, The content of the first two lines is:
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<application xmlns="http://ns.adobe.com/air/application/2.0">
Error message from flash builder debug:
typecheck Player/getLocalVideo()
outer-scope = [global Object$ flash.events::EventDispatcher$ flash.display::DisplayObject$ flash.display::InteractiveObject$ flash.display::DisplayObjectContainer$ flash.display::Sprite$ mx.core::FlexSprite$ mx.core::UIComponent$ spark.components.supportClasses::SkinnableComponent$ spark.components.supportClasses::SkinnableContainerBase$ spark.components::SkinnableContainer$ spark.components::Application$ spark.components::WindowedApplication$ Player$]
[Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} ()
0:debugfile "D:\My Documents\Adobe Flash Builder 4\LiveVideoClient\OnSiteEnforceLawPublish\src;;Player.mxml"
[Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} ()
2:debugline 20
[Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} ()
4:getlocal0
[Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} (Player[O])
5:pushscope
[Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {Player[O]} ()
6:pushnull
[Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {Player[O]} (null[O])
7:coerce_s
[Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {Player[O]} (String?[S])
8:setlocal 5
[Player[O] *[A] *[A] *[A] *[A] String?[S] *[A] *[A] *[A] *[A] *[A]] {Player[O]} ()
10:pushnull
[Player[O] *[A] *[A] *[A] *[A] String?[S] *[A] *[A] *[A] *[A] *[A]] {Player[O]} (null[O])
11:coerce mx.collections::ArrayCollection
[Player[O] *[A] *[A] *[A] *[A] String?[S] *[A] *[A] *[A] *[A] *[A]] {Player[O]} (mx.collections::ArrayCollection?[O])
13:setlocal 6
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] *[A] *[A] *[A] *[A]] {Player[O]} ()
15:pushnull
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] *[A] *[A] *[A] *[A]] {Player[O]} (null[O])
16:coerce flash.filesystem::File
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] *[A] *[A] *[A] *[A]] {Player[O]} (flash.filesystem::File?[O])
18:setlocal 7
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] *[A] *[A] *[A]] {Player[O]} ()
20:pushnull
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] *[A] *[A] *[A]] {Player[O]} (null[O])
21:coerce_s
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] *[A] *[A] *[A]] {Player[O]} (String?[S])
22:setlocal 8
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] *[A] *[A]] {Player[O]} ()
24:pushnull
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] *[A] *[A]] {Player[O]} (null[O])
25:coerce_s
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] *[A] *[A]] {Player[O]} (String?[S])
26:setlocal 9
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
28:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
33:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
38:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
43:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
48:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
53:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
58:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
63:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
68:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
73:debug
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
78:debugline 23
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
80:findpropstrict flash.filesystem::StorageVolumeInfo
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} (Object[A])
82:getproperty flash.filesystem::StorageVolumeInfo
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} (*[A])
84:getproperty storageVolumeInfo
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} (*[A])
86:callproperty getStorageVolumes 0
[Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} (*[A])
89:coerce __AS3__.vec::Vector
VerifyError: Error #1014: Class flash.filesystem::StorageVolume could not be found.
at Player/___Player_WindowedApplication1_windowComplete()[D:\My Documents\Adobe Flash Builder 4\LiveVideoClient\OnSiteEnforceLawPublish\src\Player.mxml:4]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()[E:\dev\4.x\frameworks\projects\framework\src\mx\core \UIComponent.as:12528]
at spark.components::WindowedApplication/enterFrameHandler()[E:\dev\4.x\frameworks\projects\ airspark\src\spark\components\WindowedApplication.as:2355] -
Flash imports not found (events and filesystem)
I'm trying to learn how to manipulate/display DB data using flash. In the example in Tour De Flex, I'm given the following list of imports:
import flash.data.SQLResult;
import flash.filesystem.File;
import flash.data.SQLStatement;
import flash.data.SQLConnection;
import flash.events.SQLEvent;
import flash.events.SQLErrorEvent;
import mx.collections.ArrayCollection;
However, when i copy and paste these imports into my application, I get the following errors:
Definition flash.data:SQLConnection could not be found.
Definition flash.data:SQLConnection could not be found.
Definition flash.data:SQLResult could not be found.
Definition flash.data:SQLResult could not be found.
Definition flash.data:SQLStatement could not be found.
Definition flash.data:SQLStatement could not be found.
Definition flash.data:SQLErrorEvent could not be found.
Definition flash.data:SQLErrorEvent could not be found.
Definition flash.data:SQLEvent could not be found.
Definition flash.data:SQLEvent could not be found.
Definition flash.filesystem:File could not be found.
Definition flash.filesystem:File could not be found.
Anybody know how to fix these errors?Create a data service. You can use the data features within Flash Builder or roll your own. There are a lot of articles about this, here's one from ADC http://www.adobe.com/devnet/flex/articles/datacentric_development.html.
-
Error: Definition flash.fileSystem could not be found
when trying to import import flash.fileSystem.* i am geeting an error like this
Error: Definition flash.fileSystem could not be found.
import flash.fileSystem.*
Is there any solution ? i have already refrenced the library path.Hi ReemaDevi,
I think you are working on an AIR app..
The namespace you imported is wrong...It should be
import flash.filesystem.*;
You have used fileSystem wrong case..
Thanks,
Bhasker Chari.S -
1172: Definition flash.filesystem:File could not be found.
I get the error 1172: Definition flash.filesystem:File could not be found. when i attempt to import File class or any other class from the package flash.filesystem. I already installed Adobe AIR but it still doesn't work.
you're welcome.
(been there and done that, too.) -
Error 1014: Class flash.filesystem::FileStream could not be found.
VerifyError: Error #1014: Class flash.filesystem::FileStream
could not be found.
at [verify]
at global$init()
at _Wizardv2WatcherSetupUtil$/init()
at mx.managers::SystemManager/private::docFrameHandler()
at [execute-queued]
This an AIR application, we I run it from Flex Builder works
but if I launch the SWF alone doesnt work, How I can get the
filestream to be included in my SWF.How are you launching the swf? To launch AIR applications you
should use the adl command or install the release .air version of
your AIR application.
If the main file is called main.mxml, you should be having an
xml file called main-app.xml
The adl command takes the path to the xml file. So you should
try:
adl main-app.xml
The adl command is available under the SDK bin directory.
Thanks,
Gaurav -
IdeaPad S205: BIOS/EFI menu not accessible after adding a new boot entry using the bcfg command
Hi community,
I just got a new S205 and wanted to install Win7 and archlinux in dual boot (GPT formatted SSD).
Win7 installation worked like a charm. Archlinux worked well aswell, unfortunately i couldn't make a boot entry following this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide#EFISTUB
So i had to manually create the boot entry using bcfg command in an efi shell:
https://wiki.archlinux.org/index.php/Unified_Extensible_Firmware_Interface#bcfg
The first attempt (I double checked that i got the right filesystem [fs0] and so on) failed and resulted in an automatic reboot. After this I immediately reentered the efi shell and tried again. This time I could create the boot entry.
Now if I reboot everything seems fine (I can dual boot Win and arch) BUT I cannot access BIOS/EFI menu via F2 anymore. It seems like it just does not exist anymore. How do I get it back? Should I just flash over with the original EFI from the Lenovo download page? I could theoretically do that (I can still change boot order using my arch live medium), but i could not reset EFI prior to flashing... which is always recommended to do.
So I am - again - pretty stuck with this EFI. I hope you can help and tell me what to do.
This EFI-Implementation on the S205 must be the worst piece of "engineering" ever.
Nothing works the way it is intended to... I would not dare to wash my hands clean off any faults, but ADDING a boot entry resulting in a not accessible BIOS/EFI menu... there's just something wrong.At least I now know what the problem is:
It seems like the S205 can only keep 7 boot entries in NVRAM (Can anybody concern?).
As I already have 7 boot entries:
adding a new entry using efibootmgr tool does not work (fails without error) and gummiboot doesn't work either. Nevertheless, adding a boot entry (for rEFInd) from within the UEFI shell works, but seems to result in deleting "Boot0000" aka Setup which then breaks my EFI. Breaking meaning that I cannot access it anymore.
I can however (and did so twice yesterday) flash the original EFI from within Windows and thus gain access to the EFI menu again. Nevertheless this resets my boot entries again so the refind (or gummiboot) bootloader gets deleted again and only Win7 is bootable.
Now what would be the smartest way to dual boot this system? Which of the boot entries is safe to delete so i could install refind/gummiboot instead? For instance, I don't know where USB FDD and USB CD come from. Can I delete them? Or won't I be able to boot from external CD-ROM or USB drive anymore if I delete them?
Or would it be best to delete the Win7 bootloader and try to have refind/gummiboot boot it? And will they at all be able to still find the Win7 boot files once I deleted Win7's boot entry? When I install refind as bootloader and manually add an boot entry for it using the bcfg boot add command it is able to load Windows7. But will this still be possible if I delete the Win7 boot entry? It would most likely be possible - I assume - if the Win7 boot files (on the EFI system partition) were still there even after deleting the boot entry. Can someone tell me how deleting a boot entry exactly works and which files get or don't get deleted?
Best regards. -
Firmware-upgrade failed router not accessible
during firmware-upgrade the connection to E4200 got lost due to power-outage, now the E4200 router is not accessible, power-led flashes ...
the factory-ip-address 192.168.1.1 responds on ping, but nothing else ...
how to get a working environment back?Once reset the router. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. After this process reconfigure the router. Power light should blink when you perform the reset process.
Once the light gets stabilize on the router perform the following steps:
# Open up the browser and on the address bar type 192.168.1.1, it will prompt for the username and password. Provide the username as 'admin' and password as 'admin' or 'password'. Then it will open up the Router setup page.
# Then click on status and check the firmware version. If its not updated then upgrade the firmware once again.
# Then after firmware upgrade reset the router again as explained above.
Then uninstall the existing Cisco connect software from the computer. After uninstallation then configure the router again using Cisco Connect CD as you did earlier. -
Import filesystem not working?
From what I've read, the fileSystem class (which I need to
write a data file to disk from a projector) works in Flash CS4 as
long as you have the AIR runtime (which I do), according to the
documentation.
I found quite a bit of sample code, but I can't even get the
package to load and all of the types and functions and classes are
undefined.
Here's my code:
import flash.filesystem.*;
function writeFile():void {
var file:File = File.documentsDirectory;
file = file.resolvePath("data.txt");
var fileStream:FileStream = new FileStream();
fileStream.open(file, FileMode.WRITE);
// Create string
var cOutStr:String = "This is output data";
fileStream.writeUTF(cOutStr);
fileStream.close();
When I "test movie" in CS4, it doesn't even make it past the
"import" statement, which is strange since that library is included
in the default implicitImports.xml on my installation.
The errors I get start with:
1172: Definition flash.filesystem could not be found.
And continue with expected errors if the library was not
loaded:
1120: Access of undefined property File.
Anyone have any ideas? I can't find filesystem.as in my
install folders. Perhaps it's somewhere else?
Or perhaps I misunderstand the documentation and you can't
use fileSystem in a flash projector with AIR?
Or is there some setting in Flash I need to adjust to work
with the library and AIR?
Please help. I'm on deadline for this project and I don't
have a clue of any other way of writing a text file to the local
hard disk. Any assistance greatly appreciated.No, I'm not publishing for AIR. I have the AIR runtime and
the free AIR SDK, but the AIR option on the Publish Dialog is
disabled and AIR settings on File Menu do not appear as an option.
I guess I'm pretty lost on this. -
Time capsule not accessible to my MacBook Pro.
Hello.
My time capsule is not accessible to my MacBook Pro.
I have tried restarting the time capsule, checked it's connexions & pushing a pin in the back to re-set it. The light on the front is flashing orange.
Unsure of my next step.
Thank you for any assistance.Plug the TC into the MBP by ethernet.
Press and hold the reset until the TC flashes rapidly and redo the setup.
This time use short names, no spaces, pure alphanumeric for everything.. give a different name to 5ghz as well.
So for example
TC name. TC
TC 2.4ghz TC24ghz
TC 5ghz TC5ghz
Hard disk name.. TCdata
Fix the wireless at 2.4ghz to one of the available channels.. 1, 6, 11 (13 in UK).
You can try each in turn.
Set WPA2 Personal security with passkey.. 8-12 characters.. pure alphanumeric.
Then you can plug the TC back into the network.. I presume you are using the TC in bridge mode.
If you continue having issues. tell us what OS the computer is running.
This is not at all unusual on Mountain Lion.. and fairly normal even on Lion.
You have stated Snow Leopard in the profile.. but it seldom has this much difficulty with the TC. -
I have a Sony Handycam DCR-PC109 connected to my PC with a USB cable. The PC is running Windows XP. The camcorder is set to Streaming and the video is playing on the camera's display screen. In Premiere Elements 3 I click on Capture and Import not accessible. What did I do wrong?
MLMH,
As Ozpeter says, if you have either a PICMCA or ExpressCard slot on your laptop, you can purchase a FireWire (IEEE-1394) card to fit that. Your local computer shop should have versions that will work. The only possible concern would be the BIOS of your computer - can it accommodate a FireWire connection? Most can, if the unit is no more than 5 years old. I would also be surprised if a newer unit did not have a FireWire connection. Note: this might be referred to as an "iLink," a "FireWire," or an "IEEE1394" conncetion. You might want to check the "manual," which is usually a PDF file on the restore disc, that should have come with your laptop, any printed manual or on the mfgr's Web site.
If you cannot find a card locally, I have had good service with www.firewiredirect.com. I've purchased a half-dozen different cards from them, and they are quick and have fair prices. Do a little homework, prior to ordering on-line, to make sure that you get the exact card you need, as there are a few different "form factors," with regards to these cards. Some will work in other connections, but many need exactly what they are designed for - check this out carefully and be sure to get the right one.
Also, if you do source locally, you might have the option for the tech folk in the store to set it up for you. Usually, it is just plug-it-in and go, but your BIOS might need to be updated, i.e. "flashed," or utilities might need to be installed. If you are not comfortable doing either, then it can be handy to have a "geek" do it for you.
One little warning: these card connections are not all that sturdy. When the card is installed, be careful when moving the laptop. I always remove the card, once the unit is shut down. Also, with ExpressCard slots, these are usually spring-loaded interconnects. Be carefuly, when plugging in the cable, that you do not push the card too far in, as it will then release and pop-out. You might not realize this, and wonder why your new card doesn't seem to work. Last, there are a couple of different FireWire connectors. Check out your camera, and your cable. You can either try to match up the connector to the FireWire card's connectors, or just buy a new cable with the appropriate connectors. Check your camera's manual for the connector needed for it, and then the FireWire card. In my cable box, I think I have at least a half-dozen of every possible combo of connectores, especially as most of my FW stuff now offers IEEE-1394b (FireWire 800). Heck, you can never have too many cables, right?
Good luck,
Hunt -
"Unknown Flex Problem" - 'flash.filesystem:File' is undefined.
Hi,
I have written an AIR ActionScript Library project using SDK 4.0.
I had written code for most AIR components in the library, everything was working fine.
I then needed to add code for components like FileSystemComboBox, FileSystemDataGrid, FileSystemList, etc.
For this, I added airglobal.swc and airframework.swc to the library project.
I am getting the following errors:
'flash.desktop:Icon' is undefined. Unknown Flex Problem
'flash.events:FileListEvent' is undefined. Unknown Flex Problem
'flash.filesystem:File' is undefined. Unknown Flex Problem
Im guessing that the flash package is present in both playerglobal.swc and airglobal.swc and this is giving rise to the problem internally.
Can someone tell me how to overcome this?
Thanks,
Pradeep.I am writing a library for AIR based projects. Any AIR flex project should be able to integrate my swc into their project.
The goal is automation.
So, I am having trouble automating FileSystem components in SDK 4.0 only.
The same is working fine in SDK 3.5 as it does not have a palyerglobal.swc included.
Can I remove the dependency on playerglobal.swc in SDK 4.0?
-Pradeep
Maybe you are looking for
-
Came home from class to find several prblems with my Macbook Pro
I want to start off by saying that over the weekend, I noticed that my light on my charger did not work any more, and it seems that the actual charger does not work any more either. It has been plugged in for a while but remains at 95%. Then today, I
-
"transparent" bounding boxes appear when printing from InDesign and Acrobat
Hi. I have encountered a problem with both CS4 and CS5 InDesign and Acrobat 9.0. Mac OS 10.5.8. When I print (artwork flattened before I create PDF with standard "Press Quality" from InDesign or Adobe Illustrator default from Illustrator) lighter are
-
When I try to e-mail from a site other then my mail...I am unable to do so,
-
How to create Clent in ECC 6.0
Hi All, How can we create client in ECC 6.0 version. and i want some BASIS important material can you please help me regarding this issue. Thanks All, SRIRAM
-
Problem in Calling a smartform in a driver program(SE38)
Hi, I created a report in SE38 and i have a 5 CHECK Boxes. i called a smartformsin that program. My problem is if i check the 5 check boxes the layout should show 5 copies. if i check 3 check boxes the layout should show 3 copies. e.t.c. Edited