Flash Gradient Bevel Filter not working properly in a swc

Hi,
I have a swc that is used by a AS Flash Builder project. When I export the swc from Flash Pro, I can see the filter working correctly in the priview that Flash Pro pops open. But when the swc is loaded up via Flash Builder and the swc, the gradient bevel fiter shows the first color in the gradient as green, and it looks like it's missing the first half of the gradient. It's green with a straight change to the next color, no gradient. This is happening for all objects that use this filter in the swc.
Any ideas?
cheers.

This is an ackowledge bug in Flash Builder 4.7 : (
https://bugbase.adobe.com/index.cfm?event=bug&id=3499140

Similar Messages

Flash Player installed but not working properly

I have Windows 7 64 bit, and run IE11.
I have Adobe Flash Player installed.
It works fine on my login (administrator) but my young Son can not watch video's, as it says Flash Player is not installed.
How do I fix this please?

Flash Player has updated to 11.87.800.175 today; is it working better?
If not, what means "not working properly"?

Aspect ratio filter not working properly

I am running LR3.5 on Mac OS 10.6.8 and recently discovered that the aspect ratio filter is not working when used on folders created a few years ago. Specifically, a great many images shot in landscape mode are included with the portrait mode filter instead of in the landscape mode filter. This is not happening with more recent folders. At least one of my camera bodies has been used for images in older and newer folders so I do not think it is the camera's fault. I should also add that the files are saved in the dng format.
I do not know how long this has been going on, since I rarely use the aspect ratio filter. It is even possible that this happened when I converted my catalog from LR2 to LR3. The integrity of the catalog is checked each time I back up, which is whenever I exit. Does anyone have any ideas how to fix this?
Thanks.
Mark

So the metadata is properly showing the images as landscape. Somewhere along the way LR got out of sync, perhaps moving images into a new catalog? As long as there are no portrait Crops on any of these files they should filter properly after resynching the DNG metadata. There have been other posts with this same issue and a bug report to Adobe. Not sure it has been actually fixed though:
http://paulsumberg.com/2010/08/03/leave-it-to-me-to-discover-a-flaw-in-adobe-lightroom/
http://paulsumberg.com/2010/08/14/bug-alert-adobe-lightroom-and-work-around/

Table date filter not working properly

Hi OTN,
I have noticed that table date filter not always working properly.
When I copy actual value from column outputText to column filter and hit Enter - I see an empty table.
http://imageshack.us/photo/my-images/818/filter.png/
I suspect the problem to lie among date formats.
But I tried to delete convertDateTime from outputText or add it under filter inputDate. Nothing helped.
<af:column sortProperty="Hisdate" sortable="true"
                                 headerText="#{bindings.InformationView1.hints.Hisdate.label}"
                                 id="c8" visible="false" filterable="true"
                                 width="83">
                        <af:outputText value="#{row.Hisdate}" id="ot5">
                          <af:convertDateTime pattern="#{bindings.InformationView1.hints.Hisdate.format}"/> // or without both lines
                        </af:outputText>
                        <f:facet name="filter">
                          <af:inputDate id="id15"
                                        value="#{vs.filterCriteria.Hisdate}"
                                        columns="8">
                            <af:convertDateTime pattern="#{bindings.InformationView1.hints.Hisdate.format}"/> // or without both lines
                          </af:inputDate>
                        </f:facet>
                      </af:column>Nothing special about the attribute. A database table field of type DATE. In database this (see picture) row has exactly "06.06.2006".
Could you please point me out where to start seeking?
Thanks.
JDev 11.1.1.4

Well, OK. I think I'd better have 2 attributes: truncated date for filter and full date with time for edit.
What is an attribute type for datetime?
select trunc(t.HISDATE) AS HISDATE -- date attribute type
    ,to_char(t.HISDATE, 'dd.mm.yyyy hh24:mi') AS HISDATETIME -- timestamp/date attribute type?Something like this?

Flash CS5 slow and not working properly

Dear all,
I have a serious problem on my machine.
Some months ago I bought Master Collection CS5 and worked fine without problem with Flash and Flex.
Last week I took a virus and I need to format and re-install my pc.
After that I re-installed Master Collection but now, Flash is veeeeeeeeeeery slow and some functions doesn't work properly.
for example, if I open a fla file (made before format) and I try to align a symbol on the stage, it doesn't works!!! it makes nothing! I click on the button and nothing happens!
I already try to uninstall and re-install but the problem persist.
The configuration is the same that i had before format, I only updatet my antivirus to Avast 5, but I don't think that's the problem.
My configuration is this:
Notebook HP Pavillion DV6 2056el
Intel i720
4Gb DDR3
nVidia 1Gb
500Gb HD Sata2
Someone can help me?
Regards.
Diego

iloeski wrote:
There has been a crappy firmware update AGAIN..... *sigh*
really ? ..... the last firmware update was last year December 2014 Firmware: 1.02.17 http://www.wdc.com/wdproducts/updates/?family=wdfwdtv_g2 if you have a problem with a firmware update ... then try rollback to a previous one http://wdc.custhelp.com/app/answers/detail/a_id/5860/~/how-to-roll-back-the-firmware-on-a-wd-tv-live-hub-media-center,-wd-tv-live

My flash video downloader is not working properly, and i can't able to download any videos. Is there any way to fix it ? please help me ...

Flash video is an add on for firefox, and i used to download videos in that, but now its not working.

Hey,
Please link to the addon that you're referring to (search it's name at [http://addons.mozilla.org/ the Mozilla Addons site]).
Thanks!
Curtis

Checkin filter not working properly in case of WebDAV

Hi guys,
I have written a custom checkin filter. This filter populates MetaData xStartDate of Date type.
When I checkin content item through UCM admin portal, then filter work fine and set the xStartDate meta data value.
Here is the code that is used to set meta data:
binder.putLocal("xStartDate","9/23/10");
But in case of WebDAV, content item is not checked in although Filter get executed successfully.
Please help!!!

This is an ackowledge bug in Flash Builder 4.7 : (
https://bugbase.adobe.com/index.cfm?event=bug&id=3499140

AddFilter for an AND filter not working properly with my XML

I am following the examples from the Multiple Filters Sample pages to build a page that will filter some data based upon grade levels.
http://indianawea.org/resources/outreachtest.asp
This page is calling the XML file located here:
http://indianawea.org/datasets/resourcesXML.asp
You will notice some weird things right away if you do a simple filter for K-3 Grade Levels. It will find some of the K-3 but not all of them. In addition, when I add another filter (7-8) it doesnt seem to be additive at all but doing an OR filter. The K3 and 7-8 together should only have two results (World Monitoring Day and Survival Guide).
I wonder if it has to do with my XML file struture.The grade levels are stored in a comma delimited string in the database and I pull them out, put them in an array and then loop through the array, creating XML markers for them. This was patterned after the donut example on the Spry page. I am not sure I am doing that correctly because the tags have the same names.
Any help on this is greatly appreciated. And yes, I am working on this on Easter afternoon!
Jon

Thanks for the response Gramps.
http://indianawea.org/datasets/resourcesXML.asp
That is my XML. I have added IDs to the keywordBreakout and gradeLevelBreakout
Looking at this code by Adobe, my XML seems to be in form now with theirs.
http://labs.adobe.com/technologies/spry/data/donuts.xml
In that example they are using there filter to search all toppings if I see that correct, and they have multiple topping nodes with ids. I am trying the same thing. Even with the ID's I am not getting accurate filters.
I have a data field in the database that contains the gradeLevels. It is called gradeLevels in the XML. I thought I would need to parse that out and put them in their own nodes, each grade level at a time, so that the filter can accurate find one when checked. Same for keywords. I could leave them in there comma demlinited list and do a contains instead of an = search with the SPRY filter but I feel that wouldnt be as accurate in case there are keywords that are close in names. I guess I am stumped as to what my next move might be. I'd love some more help gramps!
Jon
NOTE: Even trying this to the gradeLevel node not broken out yields poor results
function ffK3(ds, row, index){ return (row.gradeLevel.match("K-3")) ? row : null; }. It is like it is ignoring certain nodes. The Water Source Book's gradeLevels don't come up in any filter.

Oil Paint filter not working properly

When I run it, it just turns the image a dark, almost black, grey. If I change the settings, it functions properly, but several actions I have that use it all fail and give me the dark grey. I'm using Photoshop CC 64bit.

Macintosh or Windows?
Exact version of the OS and of Photoshop CC 64 bit?
What type of image?
What bit depth and what color space?
Can you show your action with all steps visible?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Junk mail filter not working properly

About two weeks ago mail started marking lots of messages as "Junk". Even messages (reminders) I send myself are marked as junk. This is entirely new and I don´t have a clue of what triggered the change in behavior.
I have turned off the junk mail filtering, but that is not my preferred solution.
Any hints on what might be going on?

I too have a problem with junk mail, but it is a little different. Every time I click junk mail for a mail message that is junk, nothing happens. What I mean by this is that the same emails from the same sources continue to come into my inbox without being filtered out. Is there some setting that I need to check to have mail filter out my junk?

Flash and Drop down not working properly on safari

I have some of my safari users experiencing trouble with my
swishmas flash image on my home page. Apparently it is causing my
drop down menu to disapear when it is selected. I know its related
to the image because yesterday i was experiencing issues with
firefox. I think its related to the transparent parameter. Anyone
run into this problem?
Any help anyone can provide is greatly appreciated!!
I just posted some changes, can someone test this url:
http://arcdev2.dcis.net/index3.html
here is the code I'm using:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,42,0"
id="home5"
width="800" height="280"
>
<param name="wmode" value="transparent">
<param name="movie" value="/images/index/home5.swf">
<param name="bgcolor" value="#FFFFFF">
<param name="quality" value="high">
<param name="allowscriptaccess" value="samedomain">
<embed
wmode="transparent"
type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
name="home5"
width="800" height="280"
src="/images/index/home5.swf"
bgcolor="#FFFFFF"
quality="high"
swliveconnect="true"
allowscriptaccess="samedomain"
>
</embed>

Hey, just wanted to say I'm having the same problem as you.
You can see my site in progress here:
http://www.maconstate.edu/nathan/
I can't get anything to stay on top of the Flash banner in
Safari. I noticed it's happening on the Adobe site as well. Is this
something that is being addressed by the Safari dev team?

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

I have lost track of the number of websites that do not work properly on the iPad without Adobe Flash player which is unsupported. I cannot use retail sites, billing sites and most important of all job application sites. All are missing tabs, links, info

I have lost track of the number of websites which do not work properly on my iPad. They include retail sites, billing sites and most important of all job application sites. They all seem to require Adobe Flash Player which cannot be downloaded onto an iPad. Skyfire does not solve the problem. They all load without vital parts of the site such as tabs, links and correct formatting. Any suggestions?

Most such brower/service combinations have a difficult time working with Flash-based apps and often fail completely. Flash videos are usually the most successful content these browers can handle. You can try the others apps - Puffin, iSwifter, etc - but you may find that none of them work, in which case you will not be able to use your iPad with these sites other than by using one of the various remote control solutions to take over a computer running the full Flash Player.
IMHO, any developer that built a Flash application for a billing or job application site was an idiot, but I know that's out of the control of anyone but the relevant company.
Regards.

Filter and navigation not working properly

Hi Gurus,
I have two reports - report1(source) and report2(target) report.
In report1, it shows two columns - Market_ID, Amount_sold
In report2, it shows two columns - Market_ID, Reasons(where Market_ID is made prompted)
In report1, I have made the Value Interaction as 'Navigate' and the target as 'path of report2' in Column properties ->Column Format
But, when I click on Market_ID(report1), it is NOT showing the details of that particulat Market_ID(report2).
It is showing the details of whole Market_ID in report2. That means, the filter is not working properly.
Is there any method in which the report2 shows the details of particular Market_ID which is selected from report1(market_ID)?
Best Regards,
J

yes you can,
in your source add a master_name column and in that make the navigation.
in the master_id column go to column format and style options and check the Use Custom CSS style option and type,
display: none
now in your source the master_id column will get hidden. in your target make the master_id prompted.
now click on the master_name in your source, your target will get filtered by the corresponding msater_id
thanks,
Karthick
Edited by: kart on Jun 7, 2010 11:52 AM

Adobe Flash Not Working Properly

The following problem applies to both I.E. and Firefox. Also, I am updated to the latest version of Flash: 11.4.402.278. Keep in mind that I have tried everything that I could find concerning this problem. Also, I am using Windows XP SP3 32bit.
I used to be able to watch video from any website that had videos to watch but recently I was not able to watch any, not even on YouTube. However, after uninstalling and reinstalling Flash I can now watch a few of the YouTube videos and nothing from any other web site. On YouTube, sometimes it works better if I disable Flash. However, when a note appears saying I need Flash, and I Re-enable Flash, it still won’t work. No notice saying anything, it simply will not play the video.
Also, if you are familiar with NetFlix, on their web site, when you hold your mouse pointer over a video title a popup is supposed to appear telling you about the video. That stopped working too. It's all screwed up and I don't know what happened.
Also, when I finish reinstalling Flash (which I have done a few times lately (after uninstalling and carefully following the instructions in the Uninstall Video)) and I am automatically taken to the Adobe page which tells me I have successfully installed Flash, I never get the little animation. It says Flash is properly installed but I never get the animation to show it is properly installed.
Also, on other sites that have test animation to show that Flash is installed and working, their animations never appear either. The problem is also evident when trying to use the websites that test my internet speed. I no longer get the applet or interface on the upload and download test sites.

Pat
No, there is no animation.
As stated on my original post, I have uninstalled and reinstalled more than
once. Each time Adobe says I have successfully installed Flash but there
is never an animation on either the Adobe site or anyother site.
Sometimes when attempting to watch a YouTube Video, like the Scorpions
performing Drive by the Cars (awesome acoustical version) it will not play
unless I disable Flash. Then trying to play a different video it says I
need flash so I re-enable flash and it doesn't work. In case you are
wondering, the video that says I need flash did not work before I disabled
flash and it did not work after re-enabling flash.
Before writing this reply I completely uninstalled flash following the
instructions on Adobe site and then reinstalled flash and it's the same as
usual. Adobe says it's installed but no animation and still have the same
problems with web videos.
This all started a couple weeks ago. Before that I had not problem.
Larry

Flash Gradient Bevel Filter not working properly in a swc

Similar Messages

Maybe you are looking for