Flash Insert Help Question

Hello,
I designed a slide show in Banner Zest and saved as a Flash file with all codes and images. Since I can't find where to place the code, how do I insert everything so that my show will run in the site?

You can place the SWF though File -> Place. If you have dependent resources to upload as well required for the flash file to run, take a look at this thread - http://forums.adobe.com/message/5087131.
Thanks,
Vinayak

Similar Messages

Can I insert pretest questions as knowledge checks between content slides and before a graded quiz without affecting the scoring of the graded quiz? Help documentation states that they should be used before a course begins.

Can I insert pretest questions as knowledge checks between content slides and before a graded quiz without affecting the scoring of the graded quiz? Help documentation states that they should be used before a course begins.
If I use both pretest questions and graded questions, can I also include remedial with return to quiz for both?

Sorry, but I gave two workarounds: my preference is custom question slides, but you can also have questions slides where you do not add the score to the Total score. They will not be reported to the LMS and can act as Knowledge slides. Only some quizzing system variables can count all question slides, including the Knowledge slides, but the core variables (score, maximum score, percentage) will be correct. Here some links to my blog, that could help you:
System variables in Captivate 8 - Captivate blog
Intermediate Score Slides - Captivate blog
That each SCORM module can have only one quiz is a SCORM requirement, not a a Captivate specific feature. Camtasia is bit difficult to compare, it is not a fully blown authoring tool although the best video screen capture tool around (video is non interactive by definition). I don't use Storyline, but cannot imagine that they shouldn't create SCORM-compliant files.

Netboot will not working, getting globe, then flashing folder with question mark.

I just created a netboot image which went off without any problems. I copied the two .nbi folders to my NetBootSP0 folder, and enabled them within netboot. My OS X server which is my netboot server and dhcp server. When I boot using N or Option N, I get the flashing globe for several seconds, the request goes through to the server and gets ACK {SELECT} however a few more seconds after, I get the flashing folder and question mark before it does a normal boot. I have read the other posts about DHCP and Subnets. My server and and clients are all 255.255.0.0. Any suggestions would be very helpful as I need this to work for several buildings.

This might work for some:
I had the same problem of the netboot image not mounting/opening, spinning globe then booting back to the Mac HD on the client and it was only when I remembered that we had manually experimented with jumbo frame rates and the MTU settings for our 32TB RAID in the Hardware settings for Ethernet ports on our servers. I turned the settings back to "Automatic" and 1000baseT on, then the whole NetInstall and Neboot was working perfectly again.

Flashing folder with question mark at Startup

Here is what I know so far.
- The computer was powered off by pushing the power button without shutting down.
- The computer was then restarted and it was coming into the white screen with the Apple logo in the middle, but i noticed that it was skewed slightly (like someone took a 4:3 ratio screen and stretched it to a 16:9) and then it would show a circle slash icon and then the flashing folder with a question mark on it.
- It would not come up in single user mode (Command + S) and it said that there was an error loading kernel 'mach_kernel'
- It would not come up in safe mode (Shift)(The flashing folder came up again)
- I reset the PRAM (Command + Option + p + r) and it seemed to fix the problem with the stretched screen but did not help the boot situation (still got flashing folder)
- I did the start up where you can select the hard drive to boot with, it owed the HD and i selected it, but then i got the flashing folder with question mark.
- It would not come up in Verbose Mode (Command V) Error loading Kernel again.
- I bought a FireWire cable and hooked it to another MacBook Pro, and booted the faulty Mac into Target Disk Mode, the FireWire logo came up on the screen and bounced around like all forums said that it would, but the drive would not show up on my host. I checked the System Profiler on the host and it did acknowledge the Target Disk Mode was there, but the drive of the target would not show up on the host. I restarted the host, nothing. I checked all of the connections, nothing. I replugged all of the connections, nothing. I even reversed the FireWire cable, nothing.
- I have DiskWarrior 4 if i can get the drive to show up in TDM, but nothing so far.
Does anyone have any suggestions?

Thanks for your help guys. I managed to get the computer started by holding down C at the Start Up with the Install Disc 1 in the computer. The disc was really kindof unnecessary, as the newest version of Mac OS X (10.4.10) became available via the hard drive.
I then found out that the battery was not installed, so I reset the management system by removing the A/C power, the battery and pushing the power button for 5 seconds, and then reconnecting everything. It did not help, the battery is bad i guess, so I am going to call AppleCare and get a new battery.
Thanks for your help.

HT1366 How to fix Flashing Folder with Question Mark on Mac

How to fix Flashing Folder with Question Mark on Mac

RichardEL is probably correct. I’ll go through your questions.
> there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not. The System Disk partition would be below the HD icon indented to the right. It is usually called “Macintosh HD” unless you renamed it.
> when I go into disk utility my HD appears on the left, but I can repair or verify it
Odd. It appears but you cannot manipulate it with Disk Utility.
> The S.M.A.R.T status reads verified
If it did not say Verified then it would indicate a problem. Saying Verified does not rule out problems but I think it indicates it is still breathing.
> Is the HD deceased?
If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing. If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
> [If I] restore from time machine [will] everything will be back as it was before?
Yes. That is the beauty of Time Machine. All your data, applications, and system preferences will be as they were as of the last backup.
> I was thinking of erasing the HD, would this be of any help or do I just need a new one?
Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk. Before proceeding it may be useful to have an expert at an Apple store look at it for you. They may be able to revive it without a clean install or new disk.
As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help. To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk. Here are links to the screwdrivers and enclosure you would need.
$5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
$22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition. Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros. This will write to every sector to map out bad blocks. (If you have an SSD do not write a pass of zeros.)
If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly. Google “Seagate 1 TB hybrid SSHD”.

Blue screen with flashing folder and question mark on startup

Hello.
I need help with my Macbook Pro. I get a blue screen with a flashing folder and a question mark at start up. To date I have tried the following:
Apple Hardware (Extensive) Test (Results: "No Trouble Found")
Safe Boot
Reset NVRAM
Reinstall OS X via the internet (I received no discs when I purchased it). I select the StartUp Disk to reinstall. When reinstalling via the internet I get to a point of reinstalling Mountain Lion but it asks me to choose a drive - yet there are no drive options to choose from. Then a window comes up asking me to "Select the system you want to use to start up your computer" but no options appear. When I choose "Restart" a note pops up saying "You can't change the startup disk to the selected disk. Startup Disk could not gather enough information on the selected disk."
The only option is "Restart" from the Apple menu. When I choose that it goes back to the original "Blue screen with flashing folder and question mark on startup."
I have no Time Machine
I can't access the disc utility.
Are there any ideas as to what might be the problem?

Your hard drive has likely failed and needs replaced. That would explain why the system does not display it when you attempt to reinstall the OS via Internet Recovery.

Inserting a Question Slide

I am trying to insert a question slide, but it keeps defaulting to insertion as slide 9 when I need it to be later in the slide deck. I cannot seem to move the slide to where I need it either. Can someone help me fix this, please?

Hi There,
Welcome to Adobe Forums.
Can you tell me the version of Captivate You are using (Go to Help > About Adobe Captivate) ?
Have you tried the same with a new Blank Project ?
Try to Copy and Paste all the slides in a new Blank project of same resolution and then check .
Thanks and Regards
Himanshu Satija

Will Flash Catalyst help "me"?

Flash Catalyst is supposed in bring developers and designers together. But I am one of those hybrids and does the devloping and designing. Usually I will create skins in Illustrator, then import skin artwork in flex, which auto generates the .css file applying each skin to each class, and all I need to do is reference the .css file. So with this in mind will Flash Catalyst help me at all?
I have been using Illustrator for a while now and am comfortable designing with it, so would it really be worth learning a whole new app?
There is one major drawback in the way I do it that I wonder if Catalyst handles. When I skin in illustrator the overall themeColor is built into the skin, so I cannot change the theme color simply by changing the global themColor style. Is this something that is addressed in Catalyst?
Also off topic, does anyone know if Orielly is going to be publishing a "Programming Flex 4" book?
Thanks!

Catalyst is in his early birth stage, so for now it's really slow and memory consuming, you'll spend lot of time importing Illustrator stuff in to your Catalyst project. As to your question regarding themeColor, yes this could be done easily.
Overall, I think Catalyst it's a handy tool to bring creative Designer Idea to live faster than ever, and it would be just ideal for making quick semi-functional sketches just to feel the breath of Idea in test-drive mode. As well it suits for simple applications better, the simplier application is - the more benfit you'll gain out of Catalyst

Flash CS3: Help me make my movie play, please!

URL: http:schoolsignsonline.com
This is an electronic sign company, so I'm trying to put a Flash movie of one of their signs onto their preexisting site. No sound, no skin, no controls, just the movie, looping endlessly.
I imported an .avi video (from a PC) from the client into Flash CS3 (on a Mac), and made sure my stage was the same size as the file parameters.
Saved the file. Tested the movie in Flash. **The movie plays just fine**. It's a picture of brightly colored balloons ascending on a black background.
I publish the movie.
I copy the .fla and .swf into the flash folder at the root level of the site on my local server.
I go into Dreamweaver CS3 to insert the movie using their Insert>Flash into the div I've created for it on the index page (which uses server side includes for the nav & footer only - no PHP involved - so each page has an .shtml extension).
I test the movie in DW by clicking on the green arrow in the properties toolbar. Nothing but white. Movie doesn't play, or if it is playing, it's only white.
What the heck. I save the page, letting DW generate the script.
I upload the revised index page, the flash folder (with the .swf and .fla files in it), and the Scripts folder to the site on the remote server.
Go to a browser. Nothing but white where the movie is supposed to be.
I asked about this on the Adobe DW group on Yahoo Groups, and they really didn't know, thinking it was a Flash problem. One of them said the movie couldn't be found. Dang it! This is a script that DW generated when I placed the movie into the page! I don't know anything about JavaScript (yet), so I'm not going to muck about in the code to break it.
BTW, the HTML for the page with the movie on it no longer validates - I hear this is typical of a CS3 Flash insertion by DW.
Can anyone PLEASE help me figure out what I've done wrong? What other info do you need from me?
Thank you in advance.
Theresa

For the Flash-generated html file, you basically want to copy the script tag in the head section....
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
into the same place in the head section of the real file.
and copy the entire section of code in the body starting with and including...
<script language="javascript">
if (AC_FL_RunContent == 0) {
.... all the stuff between....
</object>
</noscript>
into the div you mention
And in the case of what's shown above, you would want to have the AC_RunActiveContent.js file in a Scripts folder.

Flashing Folder and Question Mark, no installation disc

Yesterday, Safari froze up while I was it which I have never had happen before. So, I manually shut my Macbook off and tried to restart. When I did so, I received a gray screen with a flashing folder and question mark. From my research, I have found that usually this means that my laptop can't find the operating system and this issue can usually be resolved by inserting the installation disc. Problem is, I bought my Macbook secondhand and never got an installation disc. Does anyone know of a way around this issue? Or if buying the Snow Leopard upgrade for $30 instead of buying a whole new package for about a hundred dollars more might resolve this issue?
Thanks so much,
Kristin

Yes, quite a quandary. You have some options:
1. Call AppleCare and ask for customer support. You can order replacement discs for the model you have.
2. Purchase an OS X retail installer suitable for your model, like Snow Leopard, that you can use to determine if you can repair the hard drive or will nee to reinstall OS X. If the latter and you are using Snow Leopard, then you just install it. The installer will determine whether to upgrade or not automatically. As long as your drive is OK Snow Leopard will not erase the drive so all your files are safe. If you use an earlier version of OS X then you want to choose the Archive and Install option. See the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Flashing Finder Icon/ Question Mark on Boot

Today I left my 1.33ghz G4 Mac Mini turned on whilst I went to the shop.
When I came back i found it eith a flashing finder icon/ question mark.
I restarted it and it booted up a grey screen, then after a while the flashing finder icon/question mark.
I have tried putting in the OSX install disc and holding down the C key to start up using the CD and nothing happen, all I get is the same grey screen and flashing icon.
I have also tried pressing the X key, and holding it down and restarting to get up the startup disk menu, but again nothing.
Pressing 'option' key during start up only gets me a blue background with refresh button on the left and right arrow on the right - with no Boot Up CD or HDD Icon.
I have also tried resetting the PRAM, it resets, but after it hasn't solved my problem, as i am back to square one with the boot screen and icon.
Any help would be appreciated.
Thanks,
big.bad.ben

I would agree with DP that using a wired keyboard will give better results when holding down the C key. The timing of holding down the C key is tricky, and you might have to experiment with it.
The question mark means that the Mini can't find a bootable disk. Usually this is because the internal hard drive has enough directory damage that it is not bootable. Usually this can be fixed by reformatting the internal drive or replacing it.
But if you truly can't boot from the install CD, that suggests a more serious problem with the logic board or RAM memory.
When you power-up the mini, do you get a series of beeps or light flashes? The pattern of such beeps/flashes is a diagnostic aid to determine what might be wrong. Report back with what pattern you observe.
Be sure to give the install CD some more tries, varying the timing of holding down the C key. Usually you want to do it right after the startup chime.

Flashing folder with question mark (MacMini)

Hi there,
I diagnose my Mac Mini (1.83Ghz, Intel Mac) and know that the HDD is failing, so I decide to change the HDD before the HDD totally fail.
But after I change the new HDD, and trying to install the OS back to the new HDD, I get a flashing folder icon with question mark in it, when I boot it up and press on the C key to boot from CD. So I decide to take the new HDD back out, put in an external enclosure to make sure that the new HDD is not a bad one, and I can read fine with it inside the enclosure, put it back in the Mac Mini, still the same old flashing icon.
What happen? Could someone help me please?
Thanks!

Hi Everyone,
Just for future reference for anyone who encounter this same problem, the reason that I go the flashing folder with question mark is first of all, the MacMini doesn't recognize the new hard drive. No doubt about that since the hard drive has no OS and not formatted yet. Second of all, it's because I don't have the correct Installer CD put in. I didn't know if there's any difference in the Installer CD between PowerPC MacMini and Intel MacMini, but obviously there is, since the Intel MacMini doesn't recognize the PowerPC Installer CD.
After putting the correct Installer CD in, everything works just the way it should.
Thanks for all your help, everyone!
- NyCCD

Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC

Inserting a question in to an existing quiz

Hi,
We're using version 6.1 of Presenter in PowerPoint 2000 and
2003. We're trying to insert a question in to the middle of an
existing quiz. When I add a question in the quiz manager the newly
inserted question overwrites one of my my existing question
(slides), followed by a friendly error message dialog stating an
unexpected error occured. The question never shows up in the quiz
manager, just one of my existing questions gets splatted.
Looks like there's some sort of corruption occuring in the
quiz that I can't fix without rewriting the entire quiz.
Does anyone know how to work around this problem?
Thanks in advance
Phil

I fixed this problem by doing two things. Firstly I deleted
the summary slide at the end of the quiz. This stopped the error
dialog appearing, but the new slides I was trying to insert were
still overwriting an existing question. I then deleted the
questions that were being overwritten, and all subsequent inserted
questions worked correctly. Seems like something got corrupted in
the question slide.
The quiz result summary page gets regenerated so there's no
problem with deleting it if things get corrupted behind the
scenes.

Flash content is flashing. HELP !!!

http://www.argos.co.uk/static/Product/partNumber/5080032/http://www.argos.co.uk/webapp/wcs/stores/servlet/Search?storeId=10001&catalogId=1500001801 &langId=-1&searchTerms=5080032&Submit=GO+%3E&sourceid=Mozilla-search
this is the laptop I have purchased
It is running the 64-bit version of Windows 7.
When using the 32 bit version of IE 8 any flash content flashes.
for example www.lego.com, the main picture that changes flashes on and off.
I have tried uninstalling and reinstalling flash.
Can anyone help I have tried all i can think of.
Thanks in advance

Hello,
Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

Flash Insert Help Question

Similar Messages

Maybe you are looking for