Flash Pro CS6 and IOS AIR

When publishing a SWF using IOS AIr it ask for a certificate must be selected. What does this mean?
Thanks,
Joe

it means you must have a certificate and a provisioning profile if you want to publish an app to install on an iDevice.  go to https://developer.apple.com/ and read.
if you're just goofing and you want to install on a jail-broken device, you can probably find a certificate and provisioning profile that lets you install without paying apple

Similar Messages

  • Flash Pro CS6 and Adobe AIR (and Android APK)

    I have a compiled SWF that I can't convert to a newer ActionScript 3.0 format.  Anything that I try breaks the file.  It is basically just an animation with a tad bit of code on the Movie Clips.  I can't seem to identify the culprit that causes the newer files to generate with errors so I have decided to use the load method to load the ActionScript 1/2 format into an AS 3.0 container.  This still does not work for generating APK's directly.
    However when I generate a desktop AIR file it plays just fine.
    Is there a way to take the AIR file and convert it to an APK using the command line?  I have heard of using adt on the command line but most posts speak of converting SWF's directly.  I would like to try it with the already-compiled AIR file.  If I use the SWF I might as well compile that into a non-functioning APK directly from Flash.  That's not what I'm looking to do.
    Any help is greatly appreciated.

    Hi kglad,
    Yes I have the original FLA.
    I think you're right, working with it to convert it to AS3 would be optimal.  Unfortunately it is not such an easy task because I tried that route already and I thought I had a good file but in the Android APK it still played back strangely.  With the desktop AIR I didn't have any problems after using the original FLA to reauthor the SWF movie.
    I also find it strange that when I try to import the SWF into a version of Flash below CC it does not import properly.  I guess at runtime it takes some of the ActionScript commands into account but at import-time to get it into the Library or on Stage it throws the AS out the window.
    Best,
    markerline

  • BUG - saving with both flash pro CS6 and CC causes library symbol names to change

    Concise problem statement:
    If you save with flash pro CC and then save with CS6, in the library panel, symbol names are changed.
    Specifically, pipes | and trailing spaces ("|Divider", "Divider ") get replaced by escape sequences ("&#124Divider", "Divider&#032" ...) Ampersands & and number signs # also get replaced, such that symbol names grow exponentially if you continue to save with both flash pro CC and CS6 ("Divider&#032", "Divider&#038&#035032", "Divider&#038&#035038&#038&#035035032" ...) This makes it difficult to transition a team from CS6 to CC.
    Sometimes, the original-name symbol remains, and an escaped-name symbol is also created. In this case, the children are removed from the original-name symbol, so it doesn't render anything to the screen; a mysterious, silent failure.
    Steps to reproduce bug:
    1. Create a library symbol named "|", save an xfl with flash pro CC, and close.
    2. Open, save, and close with flash pro CS6.
    3. Open, save, and close with flash pro CC.
    Results:
    A library symbol named "&#124".
    Expected results:
    A library symbol named "|".
    I submitted this bug with the bug form, and also with adobe bugbase (in case it isn't obsolete) - I'm just trying to maximize my chances of getting a fix.  Has anyone else encountered this bug?

    Hi,
    We are aware of this issue and its open for investigation internally. This issue is observed when you have certain special characters in your symbol names and try to open that file in Flash CS6. This happens due to a change in the way symbol naming is handled in Flash CC and in Flash CS 6.
    As a workaround, request you to use only Underscore or Hyphen as special characters while naming symbols or library layers etc.
    We shall update you as soon as this has been fixed.
    Thanks,
    Nipun

  • Develop Apps for Android & iOS with Flash Pro CS6 ?

    I just want to start create Apps and Games for Android.
    1. Is able to me to build an Application or Games with Flash Pro CS6 and Publish it to Android phone? also same with iOS?
    2. Whats different in developing Apps with Flash Pro and Flash Builder?
    Thankyou

    1 yes and yes.
    2. flash pro is more suitable for animators (and therefore game creators) whereas flash builder is more suitable for developers (coders): http://forums.adobe.com/thread/791165

  • Android file size limitation? (Flash Pro CS6)

    Cross posted in the Air forum.
    How can I package an Android app that is over the 50mb limit using Flash Pro CS6 and Air?  Google now allows for additional content to be downloaded separately ...

    Echo ... echo ... echo ...

  • Back button doesn't work in Flash Pro CS6 Simulator (ADL)

    Hi everyone. I'm testing Flash Pro CS6, and I've noticed the Back button is not detected in my Android app when testing in ADL (Control / Test movie / In ADL Mobile).
    When I try to select the option Device / Back (Ctrl+B) in ADL, it just doesn't do anything (I have a KEY_DOWN event listener which looks for the keycode Keyboard.BACK). In a real Android device, it works, but not in the "test movie" window (ADL). In CS5.5, the Back button always worked in ADL.
    Also, in the new Simulator window which comes up when "testing movie", there are "Menu", "Back" and "Search" buttons for easier access. Well, that Back button doesn't do anything, either.
    Does anyone know what's happening?
    BTW, I don't find the "Simulator" window too useful for my purposes. How can I disable it, so it doesn't automatically come up?
    Thanks!
    Edit: Well, it seems the KEY_DOWN event listener doesn't work for any key, not only the Back button.

    WHOWWW...
    suitable for Flash Player 11.6
    Back that down to as low a version as possible... 10 or so if possible.
    My advice.... never... ever target the latest version of plugin... most users will NOT have that plugin installed.
    Back it down and if that doesn't work, post a link to the actual Web page.
    Best wishes,
    Adninjastrator

  • Error to Install Flash Pro CS6 - Mac

    Hello, I have a Macbook Pro 2011 (with 4GB RAM) with OSX 10.8.2
    I signup the trial of Creative Clould and I am some problem to install Flash Pro CS6.
    I install the Flash from the installer of Creative Clould and I select the Flash Pro CS6 and began to download.
    When finish download and start instalation I insert my password of my user on OSX. Then began the instalation.
    When arrive 93% the system freeze and I need to turn off my macbook. I try already two times.
    After turn on again the macbook when I try to run Flash Pro CS6 shows me a window with Error 11. And then I need to remove the software. from my Macbook.
    Does anyone knows what is happening? I googled for error 11 but did not found any anwser for that.
    I download the Adobe Muse, and do not have problems to download/install from Creative Clould.
    Can you help me?
    Regards.
    Daniel

    Please follow this process before installation.
    1. Close all the application running on your system.
    2. Update latest flash player.
    3. Delete the Flash prefrence in your system.
    4. Install CS 6 after all these process
    Please let me know whether its working.

  • Lag in AS Editor, Flash Pro CS6

    I'm using Flash Pro CS6, and experiencing some major lag while typing in the AS editor (also in the Actions panel). There's anywhere from 0.5 - 3secs of lag between pressing a key and having the character appear on-screen, a major pain when trying to type quickly or holding down backspace.
    Anyone know a solution? I've tried restarting, reinstalling, and running in compatibility mode for Win XP SP2, with no luck.
    My system is an ASUS laptop, Win 7 64-bit, 256gb SSD, 16gb RAM, i7 CPU, and it's pretty new - no reason it should lag, and it runs high-intensity games fine. Also running Flash Pro CS6 12.0.2.529. I'm using AS3.
    Thanks!

    Some Laptops have troble with the new Adobe Flash Professional CS6.  if it dose not stop laging you might want to think about getting a good tower.  or it could be that you have to meny things installed on your laptop and it using up all of your resorces, and you may just need to uninstall some other programes and then it might work.
    ps. if this was helpful plz click that it was.

  • Flash pro CS6 Air for iOS設定から"デバイスにインストール"の項目がなくなっている.

    以前より、Flash pro CS6のAir for iOSでの、実機へのインストールに不具合があり、原因が不明なため、
    Flash pro CS6自体を再インストールしました。
    その後、Air for iOS設定ダイアログを確認すると、「デプロイ」のページの最下部にあった、
    「アプリケーションをデバイスにインストールする」という旨の項目がなくなっていました。
    これは、Flash pro CS6のアップデートにより、新たにそのような仕様になったのでしょうか。
    それともこちらで何か必要な設定がありましたでしょうか。
    ご回答の程、よろしくお願いいたします。

    Flashメニューの「ヘルプ」→「アップデート」にて解消しました。

  • Flash Pro CS6 iOS Native Extension Problem

    I am trying out flash pro CS6 new features.
    The most important one being ANEs [native extensions].
    in flash builder 4.6, when using an ANE for ios, it is sometimes required to put the ios5 SDK location [ -platformsdk  in ADT].
    This is completely missing in Flash Pro CS6 IDE, any way around that?
    [for the info on including the ios5 sdk check:
    http://help.adobe.com/en_US/flex/mobileapps/WSe4e4b720da9dedb5-4aefe03513238d8a1b8-8000.ht ml]
    Thanks.

    Uhmm, i'm doing a kind-of-360º-panorama-app and we need Gyroscope and Ad-hoc / AppStore distribution. And i've tried to get an answer of any kind from guys on Adobe on their AIR facebook fan page and here.
    SHould we write our own gyroscope ANE?, have any of you succesfully compiled ad-hoc or app-store with Ketzler Euler Gyroscope ANE?
    http://www.ketzler.de/2011/11/adobe-air-gyroscope-native-extension-with-euler-angles-roll- pitch-yaw-for-ios/
    regards.

  • How to install latest AIR SDK (13 or 14) in Flash Pro CS6?

    Hi, I'm using Adobe Flash Pro CS6 on Windows 7 64-bit and I wanted to add latest Adobe AIR SDK, either 13 or 14, but non of them is seen as a valid SDK by Flash.
    I've tried downloading two possible SDKs (SDK & compiler and SDK without compiler) from here: Download Adobe AIR SDK (version 13) and here http://labs.adobe.com/downloads/air.html (version 14). Each time I copied the extracted SDK folder to my Flash CS6 folder where default 3.2 and 3.4 SDKs are located. After that I open Flash, then Help > Manage Air SDK, click on " + ", browse for the new folder, and all I get is "The selected folder does not contain a valid AIR SDK" warning message. It all looks the same with all four SDKs I downloaded!
    Not long ago I added AIR 4.0 without any problems. What am I doing wrong? Is new SDK Flash CC only or what?

    What are you naming the folder?
    Just as a general tip, since many applications (Flash CS4, 5, 5.5, 6, CC) you can save some space by only putting the AIR SDK in one place. Since CS6 and CC have "Manage AIR SDK" in their settings you no longer need to locate that folder like 5.5 which requires you to overlay the AIR 2.6 folder. So save some space and put it anywhere out of the way, out of the Flash folder. I have multiple drives and I have lots of SDKs installed at root on my E:\ (E:\SDK\AIR, E:\SDK\JDK, E:\SDK\Android, etc). I then just go in the help panel like you do and point CS6 and CC to E:\SDK\AIR and they work perfectly fine with the latest SDK released recently.
    Are you updating Flash Player to 13 as well?
    Last, do not download the Flex version for Flash. Flex is for Flash Builder if you intend on using Flex (it is different than Flash).
    Do not get this:
    You want the SDK from the big orange buttons above this warning.

  • How do I get someone to activate my Flash pro cs6 after I properly deactivated it and now it won't reactivate.  I need a phone number or email address or something.

    I may need to reformat my computer soon.  It has been acting badly.  So, in accordance with instructions I have gotten from FLASH I deactivated Flash Pro CS6 before I turned off my computer to save myself a problem if the computer died before I deactivated FLASH.  Now, when I get back into FLASH PRO CS6 the "deactivate" button is grayed.  Who do I talk to about this and how do I contact them?

    See if the following helps...
    Activation & Deactivation Help
    If not, here is a contact link for chat.  For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Flash Pro CS6, JSFL, and SpriteSheetExporter.exportSpriteSheet()

    Hi, I've been trying to use SpriteSheetExporter.exportSpriteSheet() but it just reports the following error:  "Argument number 1 is invalid"
    The documentation says to pass a (file) path for the first argument.  I've tried to pass both a platform path and a URI to a file to the method without success.
    The documentation seems to need some clean up too:
    http://help.adobe.com/en_US/flash/cs/extend/WSd5f4b6c52cfaa4b1-d3431961351cb0528c-7ffb.htm l
    Anyone have a working example?

    Same problem here. Mac OS X 10.8.2, Flash Pro CS6 12.0.2.529.
    I've tried passing valid paths using valid URI, platform path, relative path, w or w/o file name and extension... all result in the same exception being thrown:
    exportSpriteSheet: Argument number 1 is invalid.
    var document = fl.getDocumentDOM();var timeline = document.getTimeline();var fileName = document.name.replace(/\.[^\.]+$/, '');var fileDir = document.path.replace(/[\/\\][^\/\\]+$/, ''); var item = document.library.getSelectedItems()[0];var spriteName = item.timeline.name;var exportDir = FLfile.platformPathToURI(fileDir); //+'/../../app/data/scenes'); var format = {format:"png", bitDepth:32, backgroundColor:"#00000000"};var writemeta = false; var sse = new SpriteSheetExporter();sse.addSymbol(item);sse.layoutFormat = "easeljs"; var path = spriteName +'.png';path = exportDir +'/'+ path;//path = FLfile.uriToPlatformPath(path); fl.trace('export '+ item +' using '+ sse +' to '+ path);var result = sse.exportSpriteSheet(null, format, writemeta);fl.trace('result: '+ result);
    Please fix!

  • Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

    Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
    can any one help me bcoz i have to publish without air runtime.......

    Hi,
    This option is available when your publish target is set to AIR 3.6.
    You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
    Thanks!
    Mohan

  • Flash Pro CS6 - not enough JVM memory - change 128 to 256, flash doesn't start.

    Hi,
    working on very large projects, I often get the "flash ran out of memory for the jvm" error.
    Restarting flash does the trick for another couple of hours, until I get that error again.
    It opens the jvm.ini file to let me increase Xmx memory value.
    I change it from -Xmx128m to -Xmx256m
    I restart flash, get the error: "Error initializing Java Runtime environment. You may need to reinstall Flash"
    I change it back to -Xmx128m, and flash starts again.
    But obviously, I again get the "not enough memory" error.
    Am I doing something wrong?
    Also,
    after installing Flash Pro CS6, previously installed Flash Pro CS5.5 does not start, gives me the JVM initialization error all the time, regardless of which Xmx value I put for CS5.5

    back to square one again. The error message just popped up. So annoying.
    update:
    I removed some of the images I embed using the '[Embed tag'. And now it publishes again without the error. Weird because the published swf is only 1.8MB. Nothing crazy. So the problem seems related to embedding images using the [Embed tag...
    update 2 / FIX:
    Instead of using the embed tag to embed images I now have an 'assets' folder that I add to the AIR project (publish settings) that contains my images. Then I load the various images using the Loader. After an image is loaded I convert it to a Texture to use in Starling like so:
    var bitmap:Bitmap = new Bitmap(new BitmapData(currentBigTextureLoader.width, currentBigTextureLoader.height, true, 0x00000000));
    bitmap.bitmapData.draw(currentBigTextureLoader);
    bigTextures[aBigTexturesToLoad[nCurrentBigTextureToLoad]] = Texture.fromBitmap(bitmap);
    You can then use these Textures to display an image in Starling like so:
    var base:Image = new Image(bigTextures["CollectionBase"]);
    Bit of a workaround but al least I don't get the Java Error anymore

Maybe you are looking for