Flashplayer.log Warning codes 1474 and 1475

Hello,
I am using an internal server to push updates to our flash player in a test environment. I have the current version of 15.0.0.189 installed on my client machines, and the same version on my internal server. I am attempting to verify functionality by examining the flashupdate.log file. It seems that everything is working, however i have 2 [warning] codes in my log and I was hoping i could get some assistance in figuring out what they are.
My system info is this:
Client system: Windows 7 Professional 32bit
Client Flash Version: 15.0.0.189
Server System: Windows Server 2012
Server Flash Version: 15.0.0.189
Server File Structure:
An excerpt of my log follows. Obviously the myflashupdate.server is a placeholder for my actual server.
<-----BEGIN LOG---->
2014-10-28+15-46-0.198 [info] 1628 myflashupdate.server
2014-10-28+15-46-0.198 [info] 1629 myflashupdate.servero
2014-10-28+15-46-0.198 [info] 1614
2014-10-28+15-46-0.198 [info] 1615
2014-10-28+15-46-0.214 [info] 1618
2014-10-28+15-46-0.214 [info] 1619 1063
2014-10-28+15-46-0.245 [info] 1628 myflashupdate.server
2014-10-28+15-46-0.245 [info] 1629 myflashupdate.server
2014-10-28+15-46-0.245 [info] 1614
2014-10-28+15-46-0.261 [info] 1615
2014-10-28+15-46-0.261 [info] 1618
2014-10-28+15-46-0.261 [info] 1604
2014-10-28+15-46-0.261 [info] 1608
2014-10-28+15-46-0.276 [info] 1631 /pub/flashplayer/update/current/sau/currentmajor.xml
2014-10-28+15-46-0.354 [warning] 1474 12044
2014-10-28+15-46-0.354 [warning] 1475
2014-10-28+15-46-0.354 [info] 1432
2014-10-28+15-46-0.370 [info] 1612
2014-10-28+15-46-0.370 [info] 1620
2014-10-28+16-46-0.180 [info] 1628 myflashupdate.server
2014-10-28+16-46-0.180 [info] 1629 myflashupdate.server
<----END LOG---->
Does this log mean my updates are working correctly (Aside from trying to pull the same version as the one installed)?
What are the 2 Warning codes?
Thanks you for any and all replies!

Thanks for your reply!
I didn't notice somehow that the folders were only listed in my screenshot. the currentmajor.xml is in the sau directory as showcased by the screenshot below. the contents are:
     \sau\currentmajor.xml
<version>
      <Player major="15" majorBeta="15" />
</version>
\sau\15\xml\version.xml
<?xml version="1.0" ?>
<version>
     <ActiveX major="15" minor="0" buildMajor="0" buildMinor="189" />
     <Plugin major="15" minor="0" buildMajor="0" buildMinor="189" />
     <MacPlugin major="15" minor="0" buildMajor="0" buildMinor="189" />
     <SAUConfig checkFrequency="1" />
</version>

Similar Messages

How can i log transaction codes, programes and tables used by a user?

Hi everyone,
i need to log transaction codes, programes and tables a user has used in a certain time. how can i trace that and is it possible with timestamps?
i tried something with the badi workload_statistic but thats not what i need. is there a simple function which can do that or is this really much more complicated?

In SE13 there is an option to log table changes for a table.
If you search for "SCU3" you will find plenty of information on this. Also search for "RECCLIENT" (without the "/") and you will find some more specialized threads.
Cheers,
Julius

[svn:osmf:] 12677: Code cleanup and changes after code review.

Revision: 12677
Revision: 12677
Author:   [email protected]
Date:     2009-12-08 16:11:31 -0800 (Tue, 08 Dec 2009)
Log Message:
Code cleanup and changes after code review.
Modified Paths:
    osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/CaptioningPluginInfo.as
    osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/loader/CaptioningLoader.as
    osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/media/CaptioningProxyElement.as
    osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/model/Caption.as
    osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/model/CaptionFormat.as
    osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/model/CaptioningDocument.as
    osmf/trunk/plugins/CaptioningPlugin/org/osmf/captioning/parsers/DFXPParser.as

Hi Zpittman,
What is you said ‘Code Review Tool’?
I assume that you meant the Code Review feature in TFS. I tried it in Visual Studio 2013 with update 4 and TFS 2013 with Update 4, the whitespace was detected and the code review see it as a difference.
If you don’t get the same result with me using VS and TFS, please upgrade your VS and TFS to the latest update.
If the issue still exists, please
reset your VS settings through Tools->Import and Export settings->Reset all
settings->…. and repair your VS.
If code review tool is a third-party tool or a third-party VS/TFS add-in, the official support of this tool can be a better place to resolve your issue.
If I misunderstood anything, please feel free to come back.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, anyone had this problem and has advice?

Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?

See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help.

Flashplayer.log

I've searched and I cannot find a list of error numbers and what they mean for the flashplayer.log. Can someone please provide this info?
Here are some examples, and while I welcome replies about these codes, I really need a list of all codes so I can get my internal flash update server working with my 1400 clients. Thanks!
2015-1-6+22-1-10.234 [info] 1628 internal.update.server
2015-1-6+22-1-10.234 [info] 1629 internal.update.server
2015-1-6+22-1-10.234 [info] 1614
2015-1-6+22-1-10.234 [info] 1616
2015-1-6+22-1-10.234 [info] 1618
2015-1-6+22-1-10.234 [info] 1604
2015-1-6+22-1-10.234 [info] 1608
2015-1-6+22-1-10.234 [info] 1612
2015-1-6+22-1-10.234 [info] 1620
2015-1-6+22-2-37.157 [info] 1628 internal.update.server
2015-1-6+22-2-37.157 [info] 1629 internal.update.server
2015-1-6+22-2-37.157 [info] 1614
2015-1-6+22-2-37.157 [info] 1616
2015-1-6+22-2-37.157 [info] 1618
2015-1-6+22-2-37.157 [info] 1608
2015-1-6+22-2-37.157 [info] 1612
2015-1-6+22-2-37.157 [info] 1620

Thanks for your reply!
I didn't notice somehow that the folders were only listed in my screenshot. the currentmajor.xml is in the sau directory as showcased by the screenshot below. the contents are:
     \sau\currentmajor.xml
<version>
      <Player major="15" majorBeta="15" />
</version>
\sau\15\xml\version.xml
<?xml version="1.0" ?>
<version>
     <ActiveX major="15" minor="0" buildMajor="0" buildMinor="189" />
     <Plugin major="15" minor="0" buildMajor="0" buildMinor="189" />
     <MacPlugin major="15" minor="0" buildMajor="0" buildMinor="189" />
     <SAUConfig checkFrequency="1" />
</version>

2TB Ext. Hard Drive is corrupted?, error code -50 and then error code -35 when i try to empty out my trash

okay so a few days ago i received and email for one of my colleagues to do some final editing to a music video. the folder contained 2 videos a rough chops and the main which was about 2-3GB which i dragged on to my external hard drive . and at the time i was trying to install a trial version of parallel lines and me being a newbie to the software i didn't know i need windows installments for it to run lol but yeah... so i was just getting frustrated with the software i kept installing it uninstalling it and then i was thinking my the problem might be because my MacHD space is low (less then 40GBs on my MacHD), so.. i installed it on my hard drive where all my important files are (I'm a graphic designer and do light video editing) video projects and many photoshop projects form 2007 and logs and just a bunch of important files in my hard drive. so because i was so frustrated with the software i wasn't thinking and i installed it on my external 2TB hard drive. and when i realized parallel wasn't working i gave up, uninstalled the program form the hard drive and for some reason when i did that and i tried opening the video my friend had email to me and for some reason it did load up but a few seconds maybe about 10sec in the video is froze and closed my media app (VLC) and when i tried opening other video files it would freeze every few minutes but those specific files i had drag in last were not playing after at least 5 secs and eventually didn't open at all so i restart my computer login and now i get scared i see that my MacBook Pro isn't reading my external hard drive so i search threw forums... i unplug from the wall plug my external hard drive back in my computer and it loaded up but when i opened my external hard drive all my files had that plank white paper icon on my folders (because i have everything organized but subject when you open then drive folder. so... i go in to my projects and nothing, i open my edited photos and nothing... my hart feels like its about to drop and i keep opening files and there is nothing in them, but in "get info" of my drive it shows that there is filled so i go to "disk utility"... i "verify disk" passes ..."repair disk" doesn't past.... i look it up in forums... so i reboot my computer and go to the safe recovery menu. go threw the same ting "disk utility"... verify, pass... repair, pass... so now i feel relieved. i login files in the ext. hard drive load up i tried again to open the files and same thing happens... so now I'm thinking its the files i drag the files to the trash and try to empty and its gone i reboot the computer and my drive didn't load up so i tried unplugin it and back in... drive comes up i notice theres trash.. i tried emptying it and i get the error code -50. and no files are popping up on my external drive and i try to repair/unmount disk and the verify disk doesn't pass and when i click repair disk it doesn't past and another error code pops up -35.... so i felt my drive alone for a few days and yesterday i go the files deleted from the trash and now I'm not getting any codes but when i try to unmount.verify/repair the disk. keeps letting my tits need to be repaired so i click the repair button another error unable to unmount volume to repair...
what do i do? my files still don't show up. and I'm very sorry for the long paragraph but i have to be detailed for you to understand my situation

Read this.

Warning codes generated in UCCHECK   - Technical Upgrade - 4.0b to ECC 6.0

Hi SDN'ers ,
I am currently working on Technical Upgrade project from 4.0 b system to ECC 6.0 system . I am facing a
problem relating to the analysis of the warnings displayed whehn we run the UCCHECK for the client inventory by
checking the "Display lines that cannot be analyzed statically" option under the Selection-screen block
"Statements that cannot be analyzed statically" .Based on the warning codes generated during UCCHECK, they can
be classified into 12 different categories given below in the list ( Viz. ABB,MESSAGEG!C,MESSAGEG!D......MESSAGEG!P).The same are given below in the end
I want to know
- Which are the warning codes which need resolution so that the program does not encounter any runtime
errors or during Integration testing ?
- Do all the offset related errors (For example ;variable A = B+offset(length)
or variable A+offset(length) = B ) need resolution so that the program gives no runtime error.
- Also, do all statements where length is calculated using STRLEN also need changes ? I have seen offset length related warnings come under MESSAGEG!M warning code.
The objective of this is to make sure that the upgraded system ECC 6.0 in Australia ,when rolled out to
non-English speaking geographies in APAc such as Malaysia,Japan or China would only need translations and no ABAP Coding effort even when using languages such as Japanese which have double byte characters.
S.No.     Error Code     Message
1     ABB     Syntax Check Aborted
     ABB Total
2     MESSAGEG!C      check at runtime. at runtime.
           statement because of untyped or generic operands. It can only carry out this
          The system could not perform a static convertibility check on the current
     MESSAGEG!C Total
3     MESSAGEG!D      out this check at runtime. It can only carry out this check at runtime.
           to a table line because of untyped or generic operands. It can only carry out
          The system could not perform a static check on convertibility from a work area
     MESSAGEG!D Total
4     MESSAGEG!E      check at runtime. at runtime.
           defined by a "DATA" statement. .
           statement because of untyped or generic operands. It can only carry out this
          Field "ELEMENTN" is unknown. It is neither in one of the specified tables nor
          The system could not perform a static comparability check on the current
     MESSAGEG!E Total
5     MESSAGEG!F      operand "<FELD1>" for the current statement. .
     MESSAGEG!F Total
6     MESSAGEG!G      current statement on incompletely typed operand "<DATA>". .
     MESSAGEG!G Total
7     MESSAGEG!H      for the incompletely typed operand "<S>". . - - - - - - - - -
          The system cannot perform a static check on a character-type field data type
     MESSAGEG!H Total
8     MESSAGEG!I      incompletely-typed operand "<A>" in the current statement. .
          The system cannot perform a static check on a character-type data type for the
     MESSAGEG!I Total
9     MESSAGEG!J      "<%_1_SYSINI>" in the current statement to check whether the operand can be
          The system cannot perform a static check on incompletely-typed operand "VALUE"
     MESSAGEG!J Total
Early response wil be highly appreciated.

Hi Karthik
>
> 1) SPDD adjustments are done in which phase? PREPARE or UPGRADE?
>
SPDD is done in Upgrade ->Phase ACT_700
> 2) Are here special cases where the adjustments need to be done before running the UPGRADE phase?
>
At ACT_700 phase stop the upgrade and take a backup of the DB and the PUT<DIR> before starting the SPDD activity.
Make sure there are no pending tp request. Either release them or delete them.
All phase need to be completed successfully in PREPARE, before starting UPGRADE
Cheers
Shaji
Edited by: Shaji Jacob on May 5, 2008 9:23 PM

Warning codes generated in UCCHECK

Hi SDN'ers ,
I am currently working on Technical Upgrade project from 4.0 b system to ECC 6.0 system . I am facing a
problem relating to the analysis of the warnings displayed whehn we run the UCCHECK for the client inventory by
checking the "Display lines that cannot be analyzed statically" option under the Selection-screen block
"Statements that cannot be analyzed statically" .Based on the warning codes generated during UCCHECK, they can
be classified into 12 different categories given below in the list ( Viz. ABB,MESSAGEG!C,MESSAGEG!D......MESSAGEG!P).The same are given below in the end
I want to know
- Which are the warning codes which need resolution so that the program does not encounter any runtime
errors or during Integration testing ?
- Do all the offset related errors (For example ;variable A = B+offset(length)
or variable A+offset(length) = B ) need resolution so that the program gives no runtime error.
- Also, do all statements where length is calculated using STRLEN also need changes ? I have seen offset length related warnings come under MESSAGEG!M warning code.
The objective of this is to make sure that the upgraded system ECC 6.0 in Australia ,when rolled out to
non-English speaking geographies in APAc such as Malaysia,Japan or China would only need translations and no ABAP Coding effort even when using languages such as Japanese which have double byte characters.
S.No.     Error Code     Message
1     ABB     Syntax Check Aborted
     ABB Total
2     MESSAGEG!C      check at runtime. at runtime.
           statement because of untyped or generic operands. It can only carry out this
          The system could not perform a static convertibility check on the current
     MESSAGEG!C Total
3     MESSAGEG!D      out this check at runtime. It can only carry out this check at runtime.
           to a table line because of untyped or generic operands. It can only carry out
          The system could not perform a static check on convertibility from a work area
     MESSAGEG!D Total
4     MESSAGEG!E      check at runtime. at runtime.
           defined by a "DATA" statement. .
           statement because of untyped or generic operands. It can only carry out this
          Field "ELEMENTN" is unknown. It is neither in one of the specified tables nor
          The system could not perform a static comparability check on the current
     MESSAGEG!E Total
5     MESSAGEG!F      operand "<FELD1>" for the current statement. .
     MESSAGEG!F Total
6     MESSAGEG!G      current statement on incompletely typed operand "<DATA>". .
     MESSAGEG!G Total
7     MESSAGEG!H      for the incompletely typed operand "<S>". . - - - - - - - - -
          The system cannot perform a static check on a character-type field data type
     MESSAGEG!H Total
8     MESSAGEG!I      incompletely-typed operand "<A>" in the current statement. .
          The system cannot perform a static check on a character-type data type for the
     MESSAGEG!I Total
9     MESSAGEG!J      "<%_1_SYSINI>" in the current statement to check whether the operand can be
          The system cannot perform a static check on incompletely-typed operand "VALUE"
     MESSAGEG!J Total
Early response wil be highly appreciated.
10     MESSAGEG!K      "<F_YEAR>" in the current statement to check whether the operand can be
          The system cannot perform a static check for incompletely-typed operand "WINY2"
     MESSAGEG!K Total
11     MESSAGEG!M      .
           at runtime. .
           check will take place at runtime. .
           entries for operand "<F_SOURCE>(2)". This check will take place at runtime. .
           entries for operand "<F_SOURCE>+2(2)". This check will take place at runtime.
          The system cannot perform a static check on the validity of the offset/length
     MESSAGEG!M Total
12     MESSAGEG!P      out this check at runtime. at runtime.
           statement because of untyped or generic operands. The system can only carry
          The system could not perform a static compatibility check on the current
     MESSAGEG!P Total
     Grand Total

Hi Monica,
             as bhaskar said no need to worry about warnings.
warnings will not lead to dump. only runtime errors will lead to dump.
if the system is unicode, remediate the objects without errors.
we can observe mainly,
open dataset, structure incompatibilty, offset, in byte or char mode etc
thanks
vinod

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

My iMessage for my Macbook Air is not working. It says no delivered with a red ! next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time. I have done about everythin

My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

Error code 600 and 500 on autodiscover in Exchange 2010

Hi,
I have a problem on Exchange 2010 Autodiscover, the error code 600 and 500, Please see below message and please help to fix this error.
<?xml version="1.0" encoding="utf-8"
?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<ErrorCode>600</ErrorCode>
<Message>Invalid Request</Message>
<DebugData />
</Error>
</Response>
</Autodiscover>
Thanks,
ShutMo

Hi,
The website https://host.abdomain.local/autodiscover/autodiscover.xml
Shows the following error:
<?xml version="1.0" encoding="utf-8" ?>
<Autodiscover xmlns= "http://schemas.micosoft.com/exchange/autodiscover/responseschema/2006">
<Response>
<Error Time="09:28:57.8739220" Id="2715916636">
<Errorcode>600</Errorcode>
<Message>Invalid Request</Message>
<DebugData/>
</Error>
</Response>
</Autodiscover>
Test Email Autoconfiguration
<
I have do "Test Email Autoconfiguration" and have the following log:
Guessmart POP: server pop3.aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, initializing
Guessmart POP: server pop3.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, initializing
Guessmart POP: server aadomain.com, port = 995, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, starting
Attempting URL https://host.abdomain.local/Autodiscover/Autodiscover.xml found through SCP
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
GetLastError=0; httpStatus=500
Autodiscover request completed with http status code 500
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml failed (0x80004005)
Autodiscover to https://host.abdomain.local/Autodiscover/Autodiscover.xml starting
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, failed (0x800CC4005)
Guessmart IMAP: server mail.aadomain.com, port=143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port = 110, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, failed (0x800CCC1A)
Guessmart IMAP: server imap.aadomain.com, port 143, ssl=Yes, tls=No, spa=No, starting
Guessmart POP: server pop.aadomain.com, port 110, ssl=Yes, tls=No, spa=Yes, starting
then I received another failed.
Please advise.
Thanks,
Shutmo

Code Generation and Optimization

hi,
we have been looking into a problem with our app, running in a JRockit JVM, pausing. Sometimes for up to a second or so at a time.
We enabled the verbose logging of codegen and opt.
And we see entries like:
[Fri Sep 3 09:51:38 2004][28810][opt ] #114 0x200 o com/abco/util/Checker.execute(Lcom/abco/util/;)V
[Fri Sep 3 09:51:39 2004][28810][opt ] #114 0x200 o @0x243c4000-0x243c7740 1186.23 ms (14784.88 ms)
So the optimization took 1186 ms.
Does this optimization happen in the main thread?
I.e., is the above message an indication that the app had to stop for 1186ms while the optimization occurred?
Any help on this would be greatly appreciated!
Also, does anyone have any more pointers to info on the code generation and optimization in JRockit?
I have only managed to find the following:
http://edocs.beasys.com/wljrockit/docs142/intro/understa.html#1015273
thanks,
JN

Hi,
The optimization is done in its own thread and should not cause pauses in your application.
The probable cause for long pause times is garbage collection. Enable verbose output for gc (-Xverbose:memory), or use the JRockit Management Console to monitor your application. Try using the generational concurrent gc, -Xgc:gencon, or the gc strategy -Xgcprio:pausetime. Read more on: http://edocs.beasys.com/wljrockit/docs142/userguide/memman.html
If you allocate a lot of small, shortlived objects, you might want to configure a nursery where small objects are allocated. When the nursery is full, only that small part of the heap is garbage collected at a smaller cost than scanning the whole heap.
If you need help tuning your application, you could make a JRA recording and send to us: http://e-docs.bea.com/wljrockit/docs142/userguide/jra.html.
Good luck,
Cecilia
BEA WebLogic JRockit

CIFS[17138]: WARNING: CODIR: Failed to add share "MDATA" to

Can someone tell me how to get rid of the message
Code:
CIFS[17138]: WARNING: CODIR: Failed to add share "MDATA" to eDirectoy. Error: 0

Originally Posted by susehoush
cluster -> yes (3node sles10sp3+oes2sp3)
There is a nss volume object and a pool object and their attributes seem to be ok.
We also get the following 2 errors:
Code:
CIFS[17138]: ERROR: ENTRY: CIFSNDSGetCIFSServerInfo: isVirtualServer = FALSE, uServerVersion = %U, aServerVersion = e, expected = %U
ERROR: CODIR: LockDirCacheEntry failed to open file for User
Ok, This thread might be of interest (mainly the clarification in post #25) http://forums.novell.com/forums/nove...ols-howto.html
And the related TID (only as a reference in this case, not meant to apply that added python script) : CIFS not enabled properly on cluster resource that was created before upgrading to OES2 SP2
Curious if you are trying to add CIFS after having created the resources? But then still, it should not be an issue anymore (as in should have been fixed).
-Willem

Windows Updates Error Codes 80070308 and 80070643

Recently I have a problem with windows updates patches for this month (June 2014). I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643. I tried to disable the Symantec Endpoint, used the Microsoft
.NET Framework Repair Tool to fix the .Net Framework related error but still have failure. I can still finish all the failed patches by rescanning the PC than install them; however; I still have 40 PCs need to be patched. How do I prevent
the installation failure, all the PCs have no problem at last month. Any suggestion, many thanks.

Hi,
If your computer is having problems finding and installing operating system update, I suggest to
try the windows update troubleshooter.
To run a Windows Update troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
An automatic troubleshooter is available that fixes some problems with Windows Update, and it might resolve this error for you
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
this error can appear when installing updates for Microsoft Office 2003,
to fix Windows update with error code:80070643:
http://windows.microsoft.com/en-us/windows/windows-update-error-80070643#1TC=windows-7
If your computers are in a domain environment and get updated by a WSUS server, I suggest to update the group policy with the command “gpupdate /force”.
Meanwhile, if it doesn’t help, please upload the Windowsupdate.log at: C:\Windows, this will give detail error information for further support.
Regards
Wade Liu
TechNet Community Support

Code Inspector and Extended program check in one program

Hello SAP gurus,
We have a requirement where we need to create one tool which will have both code inspector and extended program check functionality and report should display all error, warning messages which are found from these checks.
Can anyone provide some suggestions on this?
Thanks,
Khushboo Dand

Hi,
Go to Se38 and check how code inpsector and extended syntax check. I dont remember the exact function module name but just debug a little u will be able to find it.
Nabheet

Flashplayer.log Warning codes 1474 and 1475

Similar Messages

Maybe you are looking for