Flat panel  display

How long do the panel display last, I am thanking about getting an iMac G5. Chuck

All liquid crystal displays (LCD) have a limited bulb life. An average I see posted around the net is about 60 000 hours. That's about 2 500 days on 24 hours a day seven days a week or about 6.8 years. Now, considering that you won't have the computer monitor on all of the time, these numbers (in theory) should be much longer.
I've had my Imac for over two years and the screen is very bright, crisp, and clear. I've noticed that the apple monitors are very good quality compared to other LCDs, so I won't be too worried about the display dying.
The computer will probably be outdated before the bulb dies. I'm not sure how big of a job it is to change the bulb either, but I believe it is possible. If you go with the suggestion above of buying the extended warranty you won't have to worry if anything does go bad.
Just a note... Apple is changing their processors over to Intel chips. There are rumours that this might be coming as soon as January and Apple is expected to switch over all of the models within the year or so.. If you aren't in a big rush, you might want to wait to see what is going to happen within the next year. There are two things, in my opinion, to consider about this. The new Imac G5 has been hailed as the best Imac ever (Macworld). It's a tried and tested machine that shouldn't give you any trouble. The second thing to consider is that the new Intel machines might have some trouble because they are going to be first-generation. While this kind of scares me (I like to see how they work before I buy), the Intel chips are rumoured to offer faster performance. The people who have pirated OS X (the Apple operating system) and hacked it so that it would run on their Intel machines have reported that it is much much faster than running on the current Power PC chips... So, it's possible that the Intel chips might allow OS X and applications to run faster.
Whatever you decide, you're going to get a good, high-quality computer when you buy from Apple. I wouldn't be concerned about the display.
Best Wishes..

Similar Messages

  • Mac Mini to G4 iMac Flat Panel display ???

    Just scanned some pages back in this forum and couldn't see this as a topic-so I'll ask.
    I was wondering, if I had a 17" Flat Panel imac (even the 800Ghz version, or the 1Ghz or the !.25Ghz - or event the 20" [yummmmy] ) could I drive the mac mini via the iMacG4's highly versatile flat panel display ???
    [ideally I'd love to be able to re-engineer the Flat Panel's guts with smaller but faster CPU etc - and as machine innards get smaller maybe this will be possible - because the screen tilt and swivel is so versatile; eh!)]
    gregg

    Hmm - why did myinnermostthoughts sudenly become a hyperlink - or is it a hyperjump into the final frontier of cyber-computing???
    Anyway, but I had hoped to just plug a keyboard into 2005 'Twiggy" , use a VGA adaptor/er between the two machines, and use the 1.42 Ghz speed of the 'Twiggy' to display stuff (CS2 etc) on the Flat Panel's display (oxymoronic word usage here - I suppose). The Flat Panels do have an vga port - so why cant the cable go from the mac mini to the VGA port of the iMac ??? Are you saying ti's almost impossible - or are you refering to re-engineering???
    Gregg

  • Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

    Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop?  Would like to use larger screen when working at home.  I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work.  When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer.  What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible?  Any assistance would be appreciated.

    quax88 wrote:
    11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
    11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
    This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
    Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
    Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
    So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
    When possibly infected e-mail files are found:
    Right-click/Control-click on either the infection or file name in the ClamXav window.
    Select "Reveal In Finder" from the pop-up menu.
    When the window opens, double-click on the file to open the message in your e-mail client application.
    Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
    If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
    If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
    To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

  • Picture too large for 20" Flat Panel display

    Mac Pro, CTO 2 x 2.66 Ghz dual-core Intel Xenon with 20" flat panel display.
    Running OSX 10.6.3
    All of a sudden, yesterday, the picture became too big for the screen. Bottom, top, and sides of display are all off screen. Moving cursor to edge moves the picture so that you can get to edge of picture. Display enlarges after login. I have had windows hide the top menu bar so that the menu bar can not be accessed. I have had windows get so large that the red, yellow, and green buttons could not be accessed as well as the resize location at bottom right. Had to shutdown by holding down the on button on the computer. The resolution of the monitor is now lower. I am using 1680 x 1050 resolution, but changing to lower resolutions does not solve problem.
    Is it a software problem, or is the monitor going bad? What can I do?

    That fixed it! I had forgotten all about that feature. I must have done it accidentally with the mouse. Thank you very much!

  • How to combine 17" iMac G4 flat panel display & iBook G4

    I have a 17" flat panel G4 800 iMac. Monitor works fine. The logic board is toast.
    I have a 14" G4 1.33 iBook that works perfectly but the screen is broken.
    I want to attach the 17" flat panel to the VGA adapter on the iBook so I can see the desktop. I plan on using the iMac to power the monitor.
    I have found the adapter & cable that attaches to the logic board for the video input for the 17" monitor.
    The key bit of information that I need to know is what wires from the 17" monitor cable needs to attach to which pins on a VGA adapter?
    I haven't found the info I need in either the iMac or iBook categories on Apples Discussion Board or searching other Mac friendly web sites.
    Thanks in advance for any help or direction you can give.
    Al 12" SD 867MHz/1GB/40GBHD   Mac OS X (10.4.8)   Ti 15" 667/1GB, iBook 14" 1.33/256MB, G4 tower DVD RAM/500/768MB

    You could try asking around to see who needs your iMacG4 for parts;
    since you should be able to get almost enough from the good display
    alone to buy a LCD monitor or one with a TV tuner to use with the iBook.
    The prices of LCDs have come down a bit; not sure if you'd need to try
    one of the ResX kind of software fixes to be able to use different resolution
    LCDs with your little iBook. Costco had a 22" LCD for under $350; so a
    smaller one may be available in the $180. range. Some with TV are coarse.
    In some markets, the LCD from your iMacG4 in great shape and working
    can be worth over $350. and if you lucked out, someone out there may
    have a refurbished logicboard. Sometimes wegenermedia and other co's
    that repair iBook/PowerBook out-of-warranty machines also have iMacG4s.
    Some also have pulled but high quality used iBook displays.
    The LCD for the iMacG4 requires a power supply and other circuits, those
    are part of the base unit's video/logic board assembly and power supply.

  • Supported flat panel displays for an ATI Rage 128 Pro/G4 500

    I originally was using an Apple 21" CRT display with my G4/500 until the display's picture tube failed. I am now looking to purchase a flat panel w/DVI, using my G4's DVI video port and the Rage 128 Pro card. I have found conflicting information on resolutions supported by the ATI card. I am looking at a Dell UltraSharp 2005FPW 20.1-inch Wide Aspect Flat Panel LCD, and the requirements indicate that my system must be able to support WSXGA+ resolution (1680 x 1050). A 24" version of the Dell monitor requires the support of WUXGA resolution (1920x1200). WIll either of these flat panel monitors work with my G4? If not, what specs do I need to look at to determine compatibility? Thanks.
    Apple G4 500   Mac OS X (10.3.1)   ATI Rage 128 Pro Graphics Card

    Hi JBernstein,
    Karl,
    I greatly appreciate your efforts to resolve my
    question.
    No worries, Mate!
    To address a question you posed earlier, no, my G4
    did not come with a ADC port. I have both VGA and
    DVI-D ports on my G4/500 (Graphite) with the Rage 128
    Pro ADP card, which is 16 mb and 2x.
    From that, I would infer that you computer is not ADC enabled.
    It was the Genius at
    the Apple Store who mentioned the Radeon 9000 card as
    a replacement. but he also suggested that the current
    20" Apple display would work with my G4 ... we tried
    that today, and the OS would not launch and power the
    display. SO, we must replace the card, or live with
    small displays.
    Yes, the ATY 128 Pro generally does not have enough grunt to power the larger displays.
    I did find a number of Radeon 9600 Pro Mac Edition
    video cards on eBay, but most had a published spec of
    4X, and the response to whether it was backwards
    compatible with the 2x capability in my G4/500 is
    that it will not work. Is that true?
    All the information I have (via the ATI website) does not specifically state that the 9600 card will support AGP 2X. Other ATI cards that do support 2X have this specifically stated in the information. Therefore, there is no garauntee that the 9600 card will support 2X. Until I receive information that someone has used this card in an AGP 2X computer with success, I cannot advise trying to use it.
    I have not
    confirmed the Radeon 8500 as yet, but as you might
    imagine, it is frustrating to get conflicting
    responses.
    The ATI Radeon 8500 will work in your computer (as, partially, will the 9000 - refer to my earlier posting).
    Perhaps you might address a different question ... is
    there any place within Apple that I can go, even with
    paying a fee for services, that would definitively
    provide an absolute solution to an upgrade type
    question, complete with exact part number AND
    guarantee that the information is quite accurate? Why
    wouldn't Apple provide some type of infomration on
    replacement/upgrade path for older products (geez ---
    the G4/500 Graphite isn't even on the legacy products
    list yet) so that the customer can invest and upgrade
    without going through a challenging process to get
    the right information? The information I've turned up
    is vague and not geared towards solutions like this.
    Apple, for all sorts of reasons (legal and commercial), is loath to provide "official" advice on the use of any third party upgrade hardware on their products. Moreover, discussions on the morality of this is probably against the terms and conditions of this discussion forum.
    I'm all ears as to how to move forward with this G4
    with a replacement card, if that is possible.
    The way I see it, you need either an ATI 8500/9000 if your only desired upgrade is the capacity to run larger displays, or an ATI 9800 is you wish to do gaming, graphics and be able to make full use of all the new Tiger graphics facilities.
    Cheers!
    Karl

  • Upgrade SNAFU - MDD/ATI 9800 Pro/Flat Panel Display

    I've been adding to my MDD and been caught overlooking the fact that my Apple ADC monitor doesn't connect to my ATI 9800 Pro. ADC, DVI, VGA .... whats next
    Anyway, is there a connector or adapter I can get to 'bridge' this last hurdle?
    Sometimes with Google you need to know exactly what you are looking for in order to get the right results. My results didn't produce what I was looking for.
    Thank you

    buz wrote:
    I've been adding to my MDD and been caught overlooking the fact that my Apple ADC monitor doesn't connect to my ATI 9800 Pro. ADC, DVI, VGA .... whats next
    Anyway, is there a connector or adapter I can get to 'bridge' this last hurdle?
    Go to the Apple Store, look under "Displays". Then look for the "Apple DVI to ADC Display Adapter". Costs $99. But that's what will do it with LCD ADC displays. Dr. Bott used to make (and may still make) the DViator which accomplishes the same thing. Both have big bricks which supply the juice to your ADC monitor -- in fact the DVIator uses the PSU for a Cube.
    I mention LCD monitor with ADC because both don't work the ADC CRT monitor. I know you have flat panel in the subject of your post; I mention that for other who might come across this thread.

  • Flat-panel display that did work... please help!

    Hi everyone. Your help on a little problem I've got would be muchly appreciated. Please allow me to explain.
    I bought my Dad a Mac mini as his first computer, about eight months ago. We couldn't afford to get him a new monitor with it - so I picked up one from eBay. We had a few problems with it initially when we got to his house and plugged it all up (I had already tested it myself at my home, and it was fine). Basically, the display would 'go to sleep' whenever we plugged it into the computer.
    We finally managed to get it working by plugging a different monitor into it - although I'm not entirely sure what changed and why it now worked!
    Recently, he had to take it all apart as he was decorating his living room and, when he put it all back together again, he is now having the same problem. Except now I'm 300 miles away and am trying to help him over the phone...
    The problem where the monitor 'goes to sleep' is back again. Plugging in another monitor he's been able to borrow temporarily works fine. Interestingly, I can remote desktop to his machine from my house and see that system preferences > display thinks that, when his monitor is plugged in and it says its asleep, the Mac mini thinks that the borrowed Dell monitor is still plugged in (the title bar for sys prefs says 'Dell' with the model number).
    I think it has something to do with the resolution that the Mac mini is trying to push out to his monitor, and it not being able to handle it. Is the Mac Mini thinking the wrong monitor is plugged in, and putting the wrong resolution and refresh rate out to it? How does the Mac mini know what the monitor can handle?
    I have tried resetting the PRAM, and I've also tried removing the preferences files described in this hint (http://discussions.apple.com/thread.jspa?messageID=3981395&#3981395).
    It does work on some of the resolutions (I can change the resolution over remote desktop and my Dad tells me if he can see anything his end), but the ideal one he was using before doesn't work. It briefly worked on a good resolution, but I clicked 'Detect displays', and then it 'went to sleep' again, and we can't get it back.
    Can anyone help please! My Dad loves his new Mac - this is the first thing to go wrong with it in all the time he's had it. And I'm a little stumped!
    Thanks for any help you can give!

    Thanks for the response.
    I'm not 100% what make the monitor is - certainly nothing I had ever heard of before.
    The resolution we were trying to get was 1024 x 768, I believe. The monitor could handle the resolution above, and it could handle the resolution below (in the sys prefs > displays list).
    Tellingly, when I change the external monitor connected to my Macbook, System Prefereces > Displays will indicate in the title bar what model monitor is plugged in. However, on my Dad's Mini, when we plugged his monitor in (after having the Dell monitor he borrowed plugged in), System Preferences still thought he had the Dell monitor plugged in.
    Could the problem be that OS X thinks its is displaying through the Dell monitor still (which has different capabilities to Dad's monitor), and therefore putting a resolution out to the monitor that it can't handle? If this is the case, then I would guess that either the DDC signal in the monitor is broken, or whatever mechanism in the Mac Mini to detect this isn't working properly.
    Any thoughts anyone?

  • Where do I find Manual for the 15" LCD Flat Panel display?

    Looked in Manuals here and did k-base seach...all I get is the manual for the older 15 " LCD Display with the oval stand.
    TIA
    KL

    Terence, your response is about as useful as gills on a hummingbird
    Nice phrase.
    Not heard of the App Store then? Not running 10.6.6 or later? If the answer to either question is no then you're stone out of luck. The only place to buy iPhoto 11 without the rest of iLife is on the App Store.
    Regards
    TD

  • Powermac 8500 Flat Panel Monitor Options

    I have a PowerMac 8500 and my Apple Multiple Scan 15 monitor is making noises, the green power button flashes, the image distorts bowing inward on the left side, or the screen doesn't light up at all.
    What Apple branded flat panel monitors can be driven by my computer? The Mac 8500 has a DB 15 connector, I believe.
    Would I need an adapter to connect the flat panel display, and which adapter?
    I have 2 Apple Flat panel 17"? monitors that came with my G4's I could test, if I had an adapter. Is this a good idea?
    Thanking you in advance.

    You don't need to buy an Apple display. Any brand LCD display can be used with a Mac, provided that the computer had adequate graphics support for it, with a suitable hardware interface. If you buy a used display, be sure that it can be returned if there are any problems (like dead pixels). When you consider the initial cost of shipping and possible cost to return a bad display, I'd be reluctant to buy a used one at eBay. Many sold there are high-mileage units pulled from corporate use. If there are any retailers in your area selling used computers, I'd check with them first. At least you'd get to try it out before buying and avoid shipping expenses. Otherwise, the prices of new displays have dropped so much that buying one for your 8500 isn't money wasted, since the display can be used with any newer computer that you might purchase.
    Have you ever added VRAM to your 8500? It shipped with (2) factory-installed 1 MB VRAM cards, and is maxed out at 4 MBs with an additional pair of 1 MB VRAM cards. You might want to consider installing a Mac-compatible PCI graphics card having onboard SGRAM or DDR-memory, to provide better performance for a newer display. If you go with an older graphics card, you'd be better off buying a display with the standard 4:3 aspect ratio - like your old Apple display. The optimal resolution setting for a widescreen display (16:9 aspect ratio) may not be supported by older graphics cards. Two old (but still good) graphics cards are the ATI Rage Pro (8 MBs of SGRAM) or the ATI Rage128 (16 MBs of SGRAM). Both of these cards have a VGA port, eliminating the need for an adapter. You could find these for very little at eBay - but they must be Mac-compatible versions. Cards pulled from PCs aren't compatible, unless they can be re-programmed with a Mac ROM. A newer graphics card, like the Radeon 9200, would be capable of supporting any modern display, but costs more than your 8500 is worth. That's when you should consider investing the $$ in a slightly newer, used Mac (like a G4 tower) with AGP graphics.

  • Older flat panel on briefly recognized

    I received an older Sylvania flat panel display and hooked it into my iMac. The iMac very briefly sees it and send output to it and then the Sylvania goes blank. I am currently running an older NEC flat panel without any problems (the iMac sees it and configures for it appropriately). Can an monitor be TOO old for the iMac? I have tried various resolution adjustments on the iMac and each time it sees the Sylvania and displays to it for a brief moment and then it goes blank. I have not yet tried the Sylvania on a separate machine to test its functionality.

    Hello, 
    There is a MiniDVI output port on the Intel iMac. Simply purchase one of the following adaptors and configure the display in Apple menu > System Preferences... > Displays. (The options appear when you connect the display):
    Apple Mini-DVI to DVI Adapter
    Apple Mini-DVI to VGA Adapter
    Apple Mini-DVI to Video Adapter.
    All available for $19 (USD) online.
    To use an Apple Cinema display the mini DVI to DVI is require and will also certainly provide the best picture quality of those three. If the display has the Apple Display Connector (ADC) and not the DVI connection you'll need a further conversion cable.
    <hr width="200">
    BTW this forum is for the much older iMac (Flat Panel) models
    G4 (aka Flat Panel): Intel:
    Click image to go to correct forum.
    You'll get better advice in the relevant forum as for example the iMac (Flat Panel) only supported VGA displays in mirror mode only.
    cheers
    mrtotes

  • Can Powerbook connect to sony LCD flat panel fo simultaneous display?

    I want to buy the Sony KDL-52XBR2 LCD flat panel and connect my Powerbook G4 using an HDMI or HD-15 Pin cable for simultaneous display.
    While the TV specs say it will allow a PC to connect and display, I have had trouble in the past with Mac/tv connectivity because of video driver issues in either the Powerbook or the tv. I could not get both screens to display simultaneously (without parts being cut off at the bottom or sides). Apple would not support my question as the "connected device" (the tv) was not an apple product.
    Before I spend the money on a new TV, I would like to know if anyone has had success with "plug-and-play" connectivity to a 42" or 50" plasma or LCD flat panel, in particular a Sony product.
    Thanks in advance for sharing.

    There is no reliable way to know if a random TV will or will not suffer from the "overscan" problem where the top, bottom and sides are cut off. Many TVs do this and there is no way to get around it.
    What I would do is take your PowerBook to the retailer where you are buying the TV and ask them if you can hook up the PB to the floor model. That is the only way to know for sure if it works to your satisfaction. Either that or, if you have a specific TV and know its model number, you might be able to ask your question again and get an answer from someone that already owns the TV. The AVSforum.com are a good place to check for various TV models.

  • Can Powerbook connect to Sony LCD flat panel properly for simul. display?

    I want to buy the Sony KDL-52XBR2 LCD flat panel and connect my Powerbook G4 using an HDMI or HD-15 Pin cable for simultaneous display.
    While the TV specs say it will allow a PC to connect and display, I have had trouble in the past with Mac/tv connectivity because of video driver issues in either the Powerbook or the tv. I could not get both screens to display simultaneously (without parts being cut off at the bottom or sides). Apple would not support my question as the "connected device" (the tv) was not an apple product.
    Before I spend the money on a new TV, I would like to know if anyone has had success with "plug-and-play" connectivity to a 42" or 50" plasma or LCD flat panel, in particular a Sony product.
    Thanks in advance for sharing.

    YOu should probalby post your question in the appropriate PowerBook "Displays" discussions:
    http://discussions.apple.com/category.jspa?categoryID=120

  • Difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)?

    May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different. Its so confusing! I want to purchase a secondary display for my 21" iMac, but idk the difference between the two.
    furthermore, another question i have is, is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
    please help, thanks!

    rae90 wrote:
    May i know the difference between a Apple LED Cinema Display (27" flat panel) and a Apple Thunderbolt Display (27-inch)? both products look the same to me, even the prices are the same, but the name of the product is different.
    One has thunderbolt capabilities, the other doesn't.
    is 27" the largest display i can get? is there larger ones (just the screen, not the computer)?
    No you can get a larger one.  Maybe not an Apple one, but certainly another brand.

  • 8800 GT vs. new Apple LED Cinema Display (27" flat panel)

    I would like to buy the new Apple LED Cinema Display (27" flat panel), however, have no idea if it is compatible with my Mac Pro. Bellows are the details of my desktop...
    Mac Pro (MacPro3.1) Quad-Core Intel Xeon 2.8 GHz * 2 (8 cores), with 12 GB DDRII 800 MHz.
    Graphics cards for Mac Pro (Early 2008): NVIDIA GeForce 8800 GT (part number 630-9191 or 630-9897)
    If it's not compatible, could someone let me know how to upgrade of what to make it work?
    Thanks!
    PJ

    Doesn't look hopeful.
    Apple LED Cinema Display 27"
    http://store.apple.com/us/product/MB571Z/A
    Obviously the ATI 5770, once it ships, will work.
    Apple Display tech note only addresses ATI 5xxx and only 2009-2010 Mac Pro models.
    http://support.apple.com/kb/HT4279
    Cutting off anything two years old, is now 'legacy'? I don't think they hope to sell their 27" to older Macs or PCs.
    In the product Q&A:
    *This looks great! Does this work with PCs?*
    Yes, but you'll need an adapter with a mini-displayport like the top of the line Radeon 5970 (they all have one MDP), or one of the 5870s specifically designed for Eyefinity (multiple displays). Search Newegg under graphics cards (advanced) and filter only cards with mini displayport. No other PC cards on the market, including Nvidia seem to have mini-displayport. It's a good interface, but I fail to see why Apple decided to loose customers to support it exclusively.
    +ADC is dead! long live proprietary technology!+

Maybe you are looking for