Flex Builder 3 Beta 2 Expires early when using Flex 2 key, and new SDK

I was told to use my Flex 2 key to extend the Beta period for
Flex Builder 3, this worked, today it said I have 99 days left.
but When I installed the latest SDK and restarted Flex
Builder 3 Beta 2, it says it expires in 15 days.
If I put the original SDK back and restart it goes back to 99
days, so If I switch the SDKs while Eclipse is already loaded it
seems to stay at 99 days, so now before I start Eclipse I have to
move the orig SDK back, start Eclipse, then switch SDKs.
This does not make much sense to me, why does the SDK affect
the Builder Beta Period at all? is there a fix for this, I have a
project due but 31st, and I would be screwed if it dies before
then, I already have flex 2 but I cannot roll back as this project
relies on Flex Builder 3 Functionality.

I the probelm we are stating is that we DID enter our flex 2
key and it DID initially set the expire date out, but I needed to
use a later SDK and thats when the problem occured. without the
latest the ImageSnapshot.captureImage does not work at all for me,
so must use a later SDK. However this morning my Eclipse started
stating 96 days remaining and I am still using the latest SDK, so
no idea why it works sometimes and not others.

Similar Messages

How to add interface to customlize MXML Component when use Flex Builder 3?

How to add interface to customlize MXML Component when use
Flex Builder 3?

David,
I don't believe you can add the interface via the creation
dialog in FlexBuilder 3. You can always manually add the
"implements" property to your MXML Component root tag. Something
like this: <mx:VBox implements="com.mycorp.IMyInterface">
If you want autogeneration of the interface, then create an
ActionScript class with that interface and then copy the generated
functions and setter/getters into the script block of your MXML
component.

Flex Builder Beta M4 uninstall failure

Flex builder beta M4 has expired 53 days earlier than
promised. But that's little trouble. Awful trouble is that it is
refusing to uninstall. When I am trying to uninstall, it says this,
quote:
quote:
java.lang.InternalError: jzentry == 0,
jzfile = 8600112,
total = 1099,
name = C:\Program Files\Adobe\Flex Builder 3\Uninstall Adobe
Flex Builder 3\uninstaller.jar,
i = 99,
message = invalid LOC header (bad signature)
at java.util.zip.ZipFile$3.nextElement(Unknown Source)
at java.util.zip.ZipFile$3.nextElement(Unknown Source)
at ZeroGy.d(DashoA8113)
at ZeroGy.a(DashoA8113)
at ZeroGy.b(DashoA8113)
at ZeroGd.g(DashoA8113)
at ZeroGd.b(DashoA8113)
at ZeroGd.b(DashoA8113)
at ZeroGd.b(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.b(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.Main.main(DashoA8113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
Anybody has any idea how to bypass this to get this POS
(piece of software) out of my system?

Hi Larry,
Thank you so much for your reply!
I am mainly using Flash Builder Beta 2 which like I said does install fine(using the stand alone version). In code mode it does crash sometimes, but is rare, it happens now and then, but what I really want to get working is the design view. i am new to flex, and would really like this to work.
when I go to the terminal
java - version
java version "1.6.0_15"
Java(TM) SE Runtime Environment (build 1.6.0_15-b03-219)
Java HotSpot(TM) 64-Bit Server VM (build 14.1-b02-90, mixed mode)
I did install java 1.5 for CodlFusion 9, turned out that I don't need it, well I think not. I was thinking about re installing Snow Leopard to see if I could get Flex working, but I have not yet done that. I have heard that others have flash builder or flex working in snow leopard, can you confirm this?
My laestest error log FlashBuilder beta 2:
http://hawaiiflash.net/flashBuilder_error.txt
for Flex 3:
http://hawaiiflash.net/flex3_error.txt
also I have http://hawaiiflash.net/Flex3.txt
now I did hear from somebody that since I have 2 different versions of java this is causing issue with Flex? should I un-install all prior versions of java and just leave the 1.6 version? I am not sure why this would cause flex to crash when in design mode?
Thank you so much for your help, I would love to get flex working in design mode, either flex 3 or flash builder`-`
Johnny

Can't download Flex Builder Beta 3

When I attempt to download Flex Builder Beta 3, I'm
redirected to
http://trials.adobe.com/pub/esd/labs/flex2/FlexBuilder2_B3_05-08.exe
in Firefox and
http://www.adobe.com/cfusion/entitlement/index.cfm?event=custom&sku=RC00211&e=labs
in IE. In both cases I get a "page cannot be displayed" or "server
not found" error. Any suggestions?

Hello,
This is being discussed internally. We're working on a
solution. Sorry!
- Rob
"KenichiM" <[email protected]> wrote in
message
news:e3uo1j$4ub$[email protected]..
> When I attempt to download Flex Builder Beta 3, I'm
redirected to
>
http://trials.adobe.com/pub/esd/labs/flex2/FlexBuilder2_B3_05-08.exe
in
> Firefox
> and
>
http://www.adobe.com/cfusion/entitlement/index.cfm?event=custom&sku=RC00211&e=la
> bs in IE. In both cases I get a "page cannot be
displayed" or "server not
> found" error. Any suggestions?
>

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate... disconnect display, open lid laptop display will not activate... used to work fine.

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button. Worked fine before Lion update. Any Advice?

Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine.
Had heard something about this happening w/ Lion but went ahead anyway.
Oh well...
Hoping your pointer helps... will let you know how it turns out. Thanks very much for responding!!!

Panel contents overlap when using borderSkin style and layout=absolute

This problem has been reported on several occasions
(http://bugs.adobe.com/jira/browse/SDK-14806)
and there are several articles that talk about this:
http://dougmccune.com/blog/2008/01/17/followup-about-flex-panel-bug/
http://dougmccune.com/blog/2008/01/12/calling-********-on-a-resolved-flex-bug/
I´m not an expert but think I found a fix/workaround for this.
frameworks\projects\framework\src\mx\containers\Panel.as
Must to be changed in the viewMetrics() method.
Line:
973- if (FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) 974- {
Replace by:
if ((FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) || (getQualifiedClassName(border) != "mx.skins.halo::PanelSkin") || (getStyle("borderStyle") != "default") ) {

Hi Andres, I haven't tried to verify your fix, but would you be willing to fill out a contributor agreement and submit an official patch? Matt On 4/25/08 12:34 PM, "Andres Serral" <[email protected]> wrote: A new discussion was started by Andres Serral in Developers -- Panel contents overlap when using borderSkin style and layout=absolute This problem has been reported on several occasions (http://bugs.adobe.com/jira/browse/SDK-14806) and there are several articles that talk about this: http://dougmccune.com/blog/2008/01/17/followup-about-flex-panel-bug/ http://dougmccune.com/blog/2008/01/12/calling-********-on-a-resolved-flex-bug/ I´m not an expert but think I found a fix/workaround for this. frameworks\projects\framework\src\mx\containers\Panel.as Must to be changed in the viewMetrics() method. Line: 973- if (FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) 974- { Replace by: if ((FlexVersion.compatibilityVersion < FlexVersion.VERSION_3_0) || (getQualifiedClassName(border) != "mx.skins.halo::PanelSkin") || (getStyle("borderStyle") != "default") ) { ________________________________ View/reply at Panel contents overlap when using borderSkin style and layout=absolute <a href=http://www.adobeforums.com/webx?13@@.59b51731><a href=http://www.adobeforums.com/webx?13@@.59b51731> Replies by email are OK. Use the unsubscribe <a href=http://www.adobeforums.com/webx?280@@.59b51731!folder=.3c060fa3><a href=http://www.adobeforums.com/webx?280@@.59b51731!folder=.3c060fa3> form to cancel your email subscription.

Performance issues when using Smart View and Excel 2010

Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
Any advice / tips on how to optimise the performance would be greatly appreciated.
Thanks,
Nick

Hi Nick,
Office 2010 (32 bit) only is supported.
Also check these documents:
Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
Smart View Refresh Returns Zeros (Doc ID 758892.1)
Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
Thank you,
Charles Babu J
Edited by: CJX on Nov 15, 2011 12:21 PM

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

Dansyacht wrote:
If the previous Safari suggestion doesn't work try the following:
In Finder, go to Macintosh HD/Library/Internet Plug-ins and move AdobePDFViewerNPAPI.plugin to the Disabled Plug-ins Folder. Restart Safari. If this works you may just want to delete that FUBAR plug-in.
Thanks. This was the solution for me.
Message was edited by: tvdowntown

In Firefox 3.6.10 I was able to go forward and backwards between pages without the page defaulting to the top of the page. Is there any way to prevent the page from automatically moving to the top when using the forwards and back buttons in Firefox Four?

I like to be able to navigate backwards and forwards without having to scroll down and find where I was previously. In Firefox Four, when using the forwards and back buttons, the page will automatically return to the top of the page. Is there any way to change this setting in Firefox Four to prevent it from doing that?

Thanks for the response. No Time Machine, but I probably have a backup from a few months ago on an external hard drive. :/ I guess it'd have useful history, but not if it overwrote the last 3 months or so of Awesome Bar, that might not be so great.

Long story short....I restored my computer to an earlier point using time machine and now all of the previous back-ups are gone. My question has to do with itunes...is it possible to restore my itunes library to the most recent backup because the restore

Long story short....I restored my computer to an earlier point using time machine and now all of the previous back-ups are gone. My question has to do with itunes...is it possible to restore my itunes library to the most recent backup because the restore that I did was in march and the latest backup was in may....the reason being is that there were app that i had downloaded that are in my most recent back-up, that were not in the backup I restored to. Is it possible to just restore one application ie)itunes?

See this post.
tt2

Dbms_crypto - avoid error when using different key in lower environment

Hello Experts,
We are using Oracle 11.2.0.2. We are planning to implement dbms_crypto to encrypt few columns. We clone the data from production to lower environment ( DEV, QC).
For the lower environments, we do not want to get the sensitive data from production and do not plan to use same key. Rather than getting an error when using differnt key, is it possible to get a different resultset back.
In other words, we want the implementation to be same across environments but want to use a diffent key in lower environment and get different result (or garbage).
Any suggestions would be greatly appreciated.
While testing this logic, I am getting following error when using differnt key to decrypt. It works fine if I use same key.
Error at line 1
ORA-28817: PL/SQL function returned an error.
ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 44
ORA-06512: at line 19
DECLARE
l_credit_card_no    VARCHAR2(19) := '1234 5678 9012 3456';
l_ccn_raw           RAW(128) := UTL_RAW.cast_to_raw(l_credit_card_no);
l_key               RAW(128) := UTL_RAW.cast_to_raw('abcdefgh');
   l2_key               RAW(128) := UTL_RAW.cast_to_raw('12345678');
l_encrypted_raw     RAW(2048);
l_decrypted_raw     RAW(2048);
BEGIN
DBMS_OUTPUT.put_line('Original : ' || l_credit_card_no);
l_encrypted_raw := DBMS_CRYPTO.encrypt(src => l_ccn_raw,
                                         typ => DBMS_CRYPTO.des_cbc_pkcs5,
                                         key => l_key);
DBMS_OUTPUT.put_line('Encrypted : ' || RAWTOHEX(UTL_RAW.cast_to_raw(l_encrypted_raw)));
l_decrypted_raw := DBMS_CRYPTO.decrypt(src => l_encrypted_raw,
                                         typ => DBMS_CRYPTO.des_cbc_pkcs5,
                                         key => l2_key); --**Using different key to decrypt
DBMS_OUTPUT.put_line('Decrypted : ' || UTL_RAW.cast_to_varchar2(l_decrypted_raw));
END;Thank you.

If I understand what you are trying to do ... and I may not ... it is not going to work.
SQL> DECLARE
2   l_credit_card_no VARCHAR2(19) := '1612-1791-1809-2605';
3   l_ccn_raw RAW(128) := utl_raw.cast_to_raw(l_credit_card_no);
4   l_key1     RAW(128) := utl_raw.cast_to_raw('abcdefgh');
5   l_key2     RAW(128) := utl_raw.cast_to_raw('zyxwvuts'); -- alternate key used to attempt a different decryption
6
7   l_encrypted_raw RAW(2048);
8   l_decrypted_raw RAW(2048);
9 BEGIN
10    dbms_output.put_line('Original : ' || l_credit_card_no);
11
12    l_encrypted_raw := dbms_crypto.encrypt(l_ccn_raw, dbms_crypto.des_cbc_pkcs5, l_key1);
13
14    dbms_output.put_line('Encrypted : ' || RAWTOHEX(utl_raw.cast_to_raw(l_encrypted_raw)));
15
16    l_decrypted_raw := dbms_crypto.decrypt(src => l_encrypted_raw, typ => dbms_crypto.des_cbc_pkc
s5, key => l_key1);
17
18    dbms_output.put_line('Key1 : ' || utl_raw.cast_to_varchar2(l_decrypted_raw));
19
20    l_decrypted_raw := dbms_crypto.decrypt(src => l_encrypted_raw, typ => dbms_crypto.des_cbc_pkc
s5, key => l_key2);
21
22    dbms_output.put_line('Key2 : ' || utl_raw.cast_to_varchar2(l_decrypted_raw));
23 END;
24 /
Original : 1612-1791-1809-2605
Encrypted : 3534443342333642353141363846384237463732384636373943374630364234323243334539383042323135
Key1 : 1612-1791-1809-2605
DECLARE
ERROR at line 1:
ORA-28817: PL/SQL function returned an error.
ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 44
ORA-06512: at line 20

"Length is too big" IOException when using OpenSSL key/certs

Using WLS 5.1, SP6, Solaris
Hello one and all:
I am trying to test WLS with SSL. I am using the OpenSSL package to act as my
own CA and generate and sign my own server certs. I don't have any problem
with this part.
However, when I try to use my private key with WLS, I get this
error upon startup:
Java.io.IOException: Length is too big: takes 56 bytes
at weblogic.security.ASN1.ASN1Header.inputLength(ASN1Header.java:133)
at weblogic.security.ASN1.ASN1Header.input(ASN1Header.java:105)
at weblogic.security.RSAPrivateKey.input(RSAPrivateKey.java:107)
at weblogic.security.RSAPrivateKey.<init>(RSAPrivateKey.java:85)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:285)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:214)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1180)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.NmsIpServer.main(NmsIpServer.java:13)
Thu Mar 22 16:02:25 EET 2001:<E> <SSLListenThread> Security
Configuration Problem with SSL server encryption Key
(<path-to-key hidden for publication --scott>),
java.io.IOException: Length is too big: takes 56 bytesI have read many messages on this group that indicate this same
problem. Some of the suggestions included checking the formatting
of the server key file for extra linefeeds, etc. I have done this.
I even tried the OpenSSL "asn1-kludge" option. It didn't work
either.
So, I hope to hear from someone who has successfully used OpenSSL
keys and certs with WLS.
Thanks,
--scott

Hi.
I had the same problem when i specified a cakey.pem file that was encrypted. For
some reason, WLS doesnt seem to support a scheme where it prompts for a password
to use for decryption of the private key. Try to decrypt the private key:
openssl rsa -in cakey.pem -out ca_unsafe.pem and deploy this certificate instead,
then it will work ;-)
[email protected] (Scott Andrew Borton) wrote:
Using WLS 5.1, SP6, Solaris
Hello one and all:
I am trying to test WLS with SSL. I am using the OpenSSL package to act
as my
own CA and generate and sign my own server certs. I don't have any problem
with this part.
However, when I try to use my private key with WLS, I get this
error upon startup:
Java.io.IOException: Length is too big: takes 56 bytes
at weblogic.security.ASN1.ASN1Header.inputLength(ASN1Header.java:133)
at weblogic.security.ASN1.ASN1Header.input(ASN1Header.java:105)
at weblogic.security.RSAPrivateKey.input(RSAPrivateKey.java:107)
at weblogic.security.RSAPrivateKey.<init>(RSAPrivateKey.java:85)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:285)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:214)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1180)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.NmsIpServer.main(NmsIpServer.java:13)
Thu Mar 22 16:02:25 EET 2001:<E> <SSLListenThread> Security
Configuration Problem with SSL server encryption Key
(<path-to-key hidden for publication --scott>),
java.io.IOException: Length is too big: takes 56 bytesI have read many messages on this group that indicate this same
problem. Some of the suggestions included checking the formatting
of the server key file for extra linefeeds, etc. I have done this.
I even tried the OpenSSL "asn1-kludge" option. It didn't work
either.
So, I hope to hear from someone who has successfully used OpenSSL
keys and certs with WLS.
Thanks,
--scott

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where are my designs stored when using Adobe CC and can i access them if i cancel ?

where are my designs stored when using Adobe CC and can i access them if i cancel ?

This is answered in the CC FAQ: http://www.adobe.com/products/creativecloud/faq.html

Flex Builder 3 Beta 2 Expires early when using Flex 2 key, and new SDK

Similar Messages

Maybe you are looking for