Flex Builder Web Server?
If I build my project in Flex Builder and click the green run
button, my project loads in a browser and runs great. But the web
address is
file:///C:/lcds/jrun4/servers/default/myProject/bin/myProject.html.
If I try to view that same page by going to
localhost:8700/myProject/bin/myProject.html I get a blank grey
screen. It's the typical Flex grey default background but my
interface isn't there.
Any ideas?
I'm stumped.
okay... a bit more digging back to the beginning of my
setup...
if I try to view the LCDS samples I get server 500 errors
with the following:
java.lang.NullPointerException
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:258)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
at
jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Sounds like something broke, obviously, but what do I need to
do... reinstall LCDS? Java? The Flex compiler?
Similar Messages
-
How to deploy flex in web server
hi there.
im newbie flex developer and im having problem in deploying my project in web server.Hi,
When you deploy your application, you make it available to customers. Typically, you deploy the application as a SWF file on a web server so that users can access it by using an HTTP request to the SWF file.
When you deploy the application's SWF file, you must also deploy all of the assets required by the application.
Deploying an application for Flex SDK and Adobe® Flex® Builder® might require you to perform some or all of the following actions:
Copy the application SWF file to your deployment server. As the previous example shows, you copy the application to webserver.example.com.
Copy any asset files, such as icons, media files, or other assets, to your deployment server.
Copy any RSLs to your web server or application server.
Copy any SWF files for your module to your deployment server in the same directory structure as you used for your development environment.
Copy any SWF files required to support Flex features, such as deep linking. For more information,
Write a wrapper for the SWF file if you access it from an HTML, JSP, ASP, or another type of page.A deployed SWF file can encompass your entire web application, however it is often used as a part of the application. Therefore, users do not typically request the SWF file directly, but request a web page that references the SWF file. Flex Builder can generate the wrapper for you, or, you can write the wrapper.
Create a crossdomain.xml file on the server for data service, if you directly access any data services outside of the domain that serves the SWF file.
Following link will help you.
http://livedocs.adobe.com/flex/3/html/help.html?content=introbd_5.html
Thanks and Regards,
Vibhuti Gosavi | [email protected] | www.infocepts.com -
Application-Builder-Exe with Web-Server crashes
Windows XP Service Pack 2
EXE file created with Application Builder
Web-server active - as picture 1 time per second
Access from browser in local network:
3 times has occured application crash:
Yesterday:
10:26:34
Application fault VI-app.exe, Version 1.0.0.0, module fault: lvrt.dll, Version 8.6.0.4001, Address 0x007424c3.
10:30:21
Memory fault 1129110434.
13:50:59
Application fault VI-app.exe, Version 1.0.0.0, module fault: lvrt.dll, Version 8.6.0.4001, Address 0x007424c3.
Now:
First access with browser at 08:03, second acess at 08:24
08:26:07
Application fault VI-app.exe, Version 1.0.0.0, module fault: lvrt.dll, Version 8.6.0.4001, Address 0x007424c3.
08:30:49
Memory fault 1129110434Hey Hellboy,
Please have a look at this thread -> http://forums.ni.com/ni/board/message?board.id=170&requireLogin=False&thread.id=194442
You might find some hints due to the facts its discussing the same error.
Christian -
Flex components is not showing up after deploying to web server
Hello,
I am working in flex builder 2.0 to develop a simple
application.
I am getting some issues around custom components.
My directory structure is as follows:
Project_Folder-
|-Components
|-bin
|-assets
|-Application.mxml
I put all my custom components in Components folder.
I have a custom component in there and the application.mxml
is using
it.
the code is somthign like this:
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" xmlns:test="Components.*"
backgroundGradientColors="[#000000, #000000]">
<test:baseLayer horizontalCenter="0" top="0"/>
</mx:Application>
Here base layer is the custom component.
My problem is when i ran it it is workign fine, but when I am
deploying it in the apache server teh Custom components are
not
showing up. I copied all contents of the bin folder to my web
server
root.
I am not sure if it will need some extra task to deploy the
custom
component?
I thought since it is in the same project the swf file
already packed
with the custom components.
Please can anyone help me to clarify that?
thank you,Thanks, this makes sense. Can you tell me how I upload the whole scripts
folder to justhost.com? When I try to select the folder at upload it opens
the folder as if I should then select a single file ( like the
AC_RunActiveContent.js file that is in the folder) So that is what I did.
Which makes sense that the path is now broken for the flash cause it is not
in the folder anymore. In other words what I don't understand is how to get
my scripts folder and its contents as a whole uploaded to the Justhost.com.
Thanks your email has been very helpful!
10/14/09 12:32 [email protected]
I did finally figure out the problem.
In my case, I was putting all of my files directly into justhost.com with no
regard for the way the files were classified in the original folders used to
build my site. In other words, you can't just put AC_RunActiveContent.js into
justhost.com randomly and expect that your Flash will work.
Instead, you have to create a Scripts folder and then put
AC_RunActiveContent.js within the scripts folder. This sets up the paths to
function the way they were originally created on your Dreamweaver document (or
whatever the html editor you may happen to be using).
Whether dealing with Flash or images, the main thing to remember is that you
have to mirror the structure of your original folders/files exactly.
So try creating a folder called Scripts, then place the AC_RunActiveContent.js
file inside of this Scripts folder, and see if that works. I assume the foder
AC_RunActiveContent.js is within Scripts, but if it called something
different, just copy the name (exactly), and put AC-RunActiveContet inside of
it.
I hope this helps,
sherwulff
> -
Internal Server Error When Trying to Open Flex Builder Tutorials
Anyone know what I need to set up to run the tutorials in
Flex Builder - get an internal error server (500) when trying to
open up the tutorials listed on the start page.
I can open, compile and run projects .
Thankswell thats a real vague error that IIS can spit out and it
could mean anything. If you are using a server side script in
conjunction with the tutorials for some reason that i would start
by commenting it all out. If you are just getting that error when
just trying to access a static html file that resides whithin your
web root then i would open up IIS and check you permisions under
your default web site for that folder. -
Web Service stub code different in FB4 than in Flex Builder 3
We have an application that was initially developer in Flex Builder 3 and used the Import Web Service wizard to generate all the webservice stub code we needed. We then upgraded to using Flash Builder 4 and importing the wsdl using the Connect to Data/Service wizard writes different stub code than what we had in Flex Builder 3.
What happened and is there a way to have the Flash Builder 4 wsdl importer write the stub code the way the Flex Builder 3 importer did?I figured out the RDS issue - check the web.xml file in the
WEB-INF folder of cfroot and webroot. I uncommented the
<servlet-name> and the <servlet-mapping> tags which
referenced RDS Servlet, restarted the server, and that took care of
the RDS issue. -
Building Flex Application with Flex Builder installed in a remote server
Building Flex Application with Flex Builder installed in a remote server and different developers accessing it via VNC etc
I have a requirement as below..........this is mainly to look for a solution where we can see a environment.............where we can stop developer to install flex builder locally, download/check out code locally and work locally ..............Please have a look ........
1. There is Remote Server hosting our source code say 1st Remote Server
2. There is another 2nd Remote Server which support workspace for each user
3. Flex Builder installed in the 2nd Remote Server
4. Each Developer connects to the 2nd Remote Server via VNC etc log in to their workspace
5. Each developer check out code in their workspace by connecting to 1st Remote Server.
6. Start Flex Builder instance which is running in the 2nd Remote Server
5. Each developer open source code modifies, build application in their workspace and check
Do anyone have any idea whether this kind of environment is possible in Flex or can anyone suggest something which is almost close to this ? I heard Cloud Computing is something that world is looking to represent this kind of solution .............not sure thoughHi
The concept of cloud computing is not even very clear to me
I think this is what I understood about it ...........from this link http://communication.howstuffworks.com/cloud-computing.htm
It says
"Instead of installing a suite of software for each computer, you'd only have to load one application. That application would allow workers to log into a Web-based service which hosts all the programs the user would need for his or her job. Remote machines owned by another company would run everything from e-mail to word processing to complex data analysis programs. It's called cloud computing, and it could change the entire computer industry"
"There's a good chance you've already used some form of cloud computing. If you have an e-mail account with a Web-based e-mail service like Hotmail, Yahoo! Mail or Gmail, then you've had some experience with cloud computing. Instead of running an e-mail program on your computer, you log in to a Web e-mail account remotely"
My issue is not with the license. The solution that I am looking for is
1. Don't want the developer to download the source code in any fashion either checked out or anything else in the local machine
2. Want the developer to work directly on the server
3. Looking for a solution where each developer is not required to install Flex Builder locally and the developer can use Flex Builder that is installed on the server and in his workspace and create/modify build on the server itself
Hope I could make you understand this time ................
Regards
Biswamit -
Building Flex application with Flex Builder in a Remote Server - Cloud Computing
Hey Guys
I have a query or its confusion probably
I was just thinking if this kind of solution is existing or possible with say cloud computing or anything else?
This is what we all probably do for building our flex application?
1. There is Remote Server hosting our source code
2. Developer check out the code in their system locally by some Configuration tool like Perforce, CVS etc
3. Developer Install Flex Builder IDE locally and open the IDE and then create.build locally and then on testing check in the code in repository
All this is fine but we have some problem here
a. We have to get all the source code checked out/downloaded in some local machine
b. We have to install Flex Builder in each every developer machine with license.
A possible modification in the above can be as follows
1. Don't download/check out the source code locally in each machine
2. Create a mapped network drive of the Remote Repository and then work directly with the mapped network drive
3. Install Flex Builder locally
4. Start Flex Builder create a Flex Project with source code in the mapped network drive
But this has some potential problem as now the building of the flex application directly work with the mapped network drive. This is very slow especially when we Keep the "Build Automatically" Check box to true
My question is that can we have a solution like this ?
1. There is Remote Server hosting our source code
2. There is another 2nd Remote Server which support workspace for each user
3. Flex Builder installed in the 2nd Remote Server
4. Each Developer connects to the 2nd Remote Server log in to their workspace
5. Each developer check out code by connecting to 1st Remote Server. This code which is checked out now goes in their workspace in the 2nd Remote Server
6. Start Flex Builder instance which is running in the 2nd Remote Server
5. Each developer open source code modifies, build application in their workspace and check
I think this is something that I heard cloud computing can do ? Do anyone have any idea whether this kind of environment is possible in Flex or can anyone suggest something which is almost close to this ?
Regards
BiswamitHi
The concept of cloud computing is not even very clear to me
I think this is what I understood about it ...........from this link http://communication.howstuffworks.com/cloud-computing.htm
It says
"Instead of installing a suite of software for each computer, you'd only have to load one application. That application would allow workers to log into a Web-based service which hosts all the programs the user would need for his or her job. Remote machines owned by another company would run everything from e-mail to word processing to complex data analysis programs. It's called cloud computing, and it could change the entire computer industry"
"There's a good chance you've already used some form of cloud computing. If you have an e-mail account with a Web-based e-mail service like Hotmail, Yahoo! Mail or Gmail, then you've had some experience with cloud computing. Instead of running an e-mail program on your computer, you log in to a Web e-mail account remotely"
My issue is not with the license. The solution that I am looking for is
1. Don't want the developer to download the source code in any fashion either checked out or anything else in the local machine
2. Want the developer to work directly on the server
3. Looking for a solution where each developer is not required to install Flex Builder locally and the developer can use Flex Builder that is installed on the server and in his workspace and create/modify build on the server itself
Hope I could make you understand this time ................
Regards
Biswamit -
How to integrate a flex build in a web application running on jBoss 5.1
Hi,
I have two flex builds for a messaging application that I have to integrate with my web application running on Jboss 5.1 . I have tried hot deploying the builds into the default deploy folder of Jboss,but that approach doesn't seem to work(maybe because I may need to make war out of the flex builds). Can someone tell me an approach of how to accomplish this. Can I leverage BLAZEDS for this purpose.
Thanks
Rohit KumarHi,
Go through Re: Web Dynpro and Smart Forms.
Regards,
Satyajit. -
Flex Builder, debugger and web application: how?
Hello,
I'm traying to setup a project in eclipse with both a java
web application (servlets, jsp) and flex applications as a
frontend. So I installed flex builder as a plugin on an eclipse+web
standard tools, then created a WST web application project, and
used the "Add flex nature.." of the flex plugin. I don't want to
use the flex data services.
Now, in a standard run (I installed a tomcat 5.5 and
configured it in eclipse), my mxlm files are being correctly
compiled into swf, and they are successfully calling my servlets
(which simulates a backend xml-based interface).
I'm having problems in debug: if I launch the debug profile
related to tomcat, the normal version of the sfw will be used (even
manually switching to the "-debug" version, it says that a running
flex debugger has not be found on localhost). On the other way, if
I launch the debug as a "flex application", it seems to work (it
stops at breakpoints) but my tomcat is not started at all, the swf
is accessed as a local file and all call to my servlet will fail..
so it will stop working almost immediately.
There is a way to setup eclipse to start standard java
debugging with tomcat *and* the flex debugger?
Thanks
CosmaI found a workaround of sorts for the problem: don't
terminate the applications!
Previously, I would terminate the application using either
the Terminate button in the Debug view or by closing the tab in the
browser (Firefox). Now I just let them pile up in the browser and I
rarely see this problem.
In other words, I was having lots of trouble when doing
Launch-Terminate-Launch-Terminate... but now I just
Launch-Launch-Launch... and clean up once in a while. -
How build the G web server ?
Hello.
How can I build the G web server from internet toolkit?
I can compile my application that uses the G web server fom internet
toolkit, but after do it and tried to call my application the g web server
does not func.
Manuel Carvalho
\|/
(o o)
-----------------------oOOo--(_)--oOOo---------------------
Manuel Carvalho mailto:[email protected]
IDITE-Minho
|Electronic Automation Unit
|Av. Dr. Francisco Pires Goncalves
|4710-911 Braga
|Portugal
|http://www.idite-minho.pt
Tel: +351 253 209300
Fax:
+351 253 209301I would suggest looking at the document on the NI website called http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/4599aaa1d7c13b0e8625664a00627d7f?OpenDocument
If you can't get to that link, go to www.ni.com, and select Support and Services.
There is a search text window in the lower left. Type g server in it, and do a search. The first item that returns in the list is the document you want.
Mark -
I am trying to get Flex Builder 3 setup but having some
problems configuring it to communicate with the app server. I had
this working once but cannot get it back. Flex builder is installed
on my XP machine and CF is installed on my Redhat 5 box with
Apache.
Here are my steps:
1. Create new flex project
2. Project Name: myfirstflex.
3. Project location: N:\myfirstflex (mapped to samba share)
This is actually /var/www/html/myfirstflex on the RH box.
4. Application Type: Web Application(runs in Flash Player)
5. Server Technology: Coldfusion. Use remote access service
is checked. LCDS is selected at the moment but does not seem to
matter which one is selected.
6. Server Location: Standalone
7. Coldfusion Root Folder: O:\WEB-INF\flex (samba share on RH
box) This is actually /opt/coldfusion8/wwwroot/WEB-INF/flex.
8. WebRoot: N:\myfirstflex (same as step 3)
9. Root URL:
http://myserver/myfirstflex
Upon on validation I get " Invalid root. The WEB-INF/flex
folder must contain either flex-config.xml or services-config.xml."
Like I said I had this working once but cannot get it back. Does
anyone see something I am overlooking?I'd love to help because I know how frustrating it is to get
it working. Unfortunately, I run CF locally and IIS as the web
server. However, maybe my settings will spark something that you
can use:
1
2. myFirstFlex
3. C:\Documents and Settings\[useraccount]My
Documents\myFirstFlex
4. Web application/
5. Coldfusion/ColdFusion Remoting
6. Standalone
7. c:\coldfusion8
8. c:\inetpub\wwwroot
9.
http://localhost/
is what works for me -
Flex 4 Web Service Introspection For Dynamic WSDL Locations
In Flex 3, introspecting a web service resulted in a constructor that allowed the location of the web service to change at runtime. It appears that the Web Service introspection tool now only allows the single WSDL URI that was specified in the WS Wizard. It this the case or am I just missing something?
Flex 3 introspected services would create a service class with the following constructor signatures:
private var service:MyWebService;
service= new MyWebService(null, wsdlLocation); // With parameters
or you could use:
service = new MyWebService(); //with no parameters
In Flex 4, it appears that you can only use:
service = new MyWebService();
So if you don't know the web server location until runtime, am I going to need to manually override the instrospected/generated _super_MyWebService.as class in order to get back the ability to point to different servers at runtime?
Anyone know why this has changed, or what the "new" way the Flash Builder 4 web service introspection tool uses for dynamic servers?
Thanks a bunch!In Flex 4, it appears that you can only use:
service = new MyWebService();
add
service.wsdl = "your wsdl";
However if you want this to work you have to remove the hardcoded wsdl from the
superclass otherwise it will not reset it,
C -
Flex builder 3 - cannot configure coldfusion8
I am using the trial version of Flex Builder 3 to create a
new project (File/New/Project/FlexBuilder/Flex Project).
In the New Flex Project window, I enter the project name,
select "web application" as the application type, and select
"ColdFusion" as the server technology. The "Use remote object
access service" is checked, and "LiveCycle Data Services" is
selected.
In the next screen - in the server location, I enter
"Standalone" as the installation type, the webroot is
"c:\inetpub\wwwroot," and the root url is "
http://127.0.0.1" (I'm using IIS, so
I'm not using port 8500). This is the screen where I see error at
the top - "LiveCycle Data Services is not installed at the
specified location." But I made sure LiveCycle Data Services was
installed when I installed ColdFusion8, and "Enable Remote Adobe
LiveCycle Data Management access" is checked in the ColdFusion
Administator panel.
What is missing? Any help would be appreciated.I figured out the RDS issue - check the web.xml file in the
WEB-INF folder of cfroot and webroot. I uncommented the
<servlet-name> and the <servlet-mapping> tags which
referenced RDS Servlet, restarted the server, and that took care of
the RDS issue. -
FLEX Builder Pro 3 New Flex Project cannot configure J2EE
I have FLEX Builder Pro 3 installed on a Windows XP machine. LiveCycle Data Services is installed (with Tomcat) on a Linux RHEL 5 machine. When trying to create a new FLEX project and configuring a J2EE server am very confused on what to put in Root Folder and Root URL. I have tried various paths on the Root Folder (with a drive mapped through windows and also with just using the servername) and keep getting the error message:
Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
I've located the flex-confing file in the tomcat5\webapps\ROOT\WEB-INF directory, but still get the error.
Please any help would be greatly appreciated.Are your new classes referenced from the old code? Mxmlc employs a questionable form of "as-needed" linking, so classes that are not referenced from the main application are not even compiled. This referencing requirement is recursive; that is, any classes that are to be included have to be referenced from the main application, or from classes referenced by the main application, or from classes referenced by classes referenced by the main application, and so on. But if your new classes are not referenced at all from the old code, they will be ignored.
Maybe you are looking for
-
Subsite permission issues in Sharepoint foundation 2013
Hi, I'm using SharePoint foundation 2013 and i'm having issue with the permissions on sub sites. I am owner of the primary site and the sub site inherits permissions, but I cannot edit the theme or upload files on the sub sites. Is there anything i
-
How to schedule a report in background
could anybody inform me how to schedule a report in background if possible plz send the entire step by step process thanx regards kals.
-
Old itunes songs only playing halfway on new computer
I used to own a 2006 macbook and now have a new windows HP laptop. When I tried to transer my itunes library to the new windows computer, all of the songs DID transfer over to the new computer from the mac, however, the songs that were purchased in 2
-
Everything is sharper on the iPad 3rd generation... but I need to know how to get the crisp white thst the iPad 2 displays. Te iPad 3 has a distinct or pronounced yellowish haze tone to white objects and affects all other colors as well. It is not th
-
Where can I download Oracle BPM Suite 10.3
i browsed edelivery, didn't find the integrated OBPM. only Aqualogic. i also checked http://www.oracle.com/technology/software/products/ias/bea_main.html but don't know which ones to take. thanks.