Flex motion library in 64 bits

Hello,
I'm integrating NI 7342 motion board to control 1 axis drive in a 64 bits application.
In my application, there are some sub-systems working in 64 bits.
I can't use the WoW principe because of the others sub-systems working in 64 bits and didn't work with WoW.
So my application need to work in pure 64 bits.
Do the Flex motion library is available in 64 bits?
Are there any means to achieve my needs?
Thank you.

Hi rdv94,
Motion library seems not to be compatible in pure 64 bits. (I read that here)
Romain P.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> NIDays 2011, le mardi 8 février au CNIT de Paris La Défense

Similar Messages

How can I use flex motion control VI without hardware?

I would like to try and simulate the motion control of my system before i hook up the motion control card. But when I use the VI in flex motion contro took kit it asks for address or something and gives me an error. Can't I just simulate without hardware?

Hello,
The only way you can use FlexMotion without any hardware is to set it up as Open Loop Stepper Control. Otherwise, you will get errors when no encoder signal is fed back to the controller.
Please let me know if you have any further questions.
Regards,
Andy Bell
Application Engineer
National Instruments

Where are the Flex Motion VIs in LabVIEW 2011

Hi all!
I just installed LabVIEW 2011 and tried to open an old project made with LabVIEW 6.1, but it can't find the Flex Motion VIs like "Load Target Position.flx" and such. How do I get them back? Do they have to be installed separately?
Thanks in advance.

Simply saying 'it did not work' is not very descriptive. Drivers do come with LabVIEW (at least when purchased) but in any case, did you try clicking on the 'Support' link at the top of the page and entering '7354' as a search item. It would have brought you here. Im not sure but I think the old flexmotion is obsolete and you would need to replace with NI-Motion functions.

Media Manager Flex View Library upload crash

The Flex View library upload option crashes whenever I try to upload anything. I have Mac OS X Lion and am trying to sync my iPhoto library Which is 20 Gb ie well below the 32Gb limit. As soon as the upload starts the program quits unexpectedly. Anyone have the same problem and an answer? Sometimes there is a partial upload before the crash, but never more than a few minutes.

I have a similiar problem with my Mac Lion. After selecting files to upload (sync) the program just hangs. I have been able to successully sync with a PC, but the Mac program just won't do it and I tried many things.

How to use NI motion library to interact with the hardware in C#?

i want to interact with a motor connected to my system using ni motion board and ni motion library. Can anyone suggest how to configure velocity and acceleration settings so that the motor can be rotated ?
Thanks in advance
Ritesh

Ritesh,
you should start by configuring and testing the motion control setup in MAX. In C# you can use the NI-Motion C API. Please refer to the documentation (NI-Motion C Reference help) and the shipping examples (C:\Program Files\National Instruments\NI-Motion\Documentation\Examples\NI-Motion Help\C).
Kind regards,
Jochen Klier
National Instruments

FLEX Motion MAX Configuration

FLEX Motion
Has anyone developed or know how to create new, read and write to a MAX
configuration file
Robert Bilderback
VI Engineering
[email protected]

Vijay,
Do the controller configuration in both WLCs are equals about parameters like WLAN id, ap groups and etc?
Because if the WLAN id are different you can lose the VLAN mapping when the AP migrate from one WLC to another.
About FlexConnect Group, it helps so much when you need to apply vlan mapping in the WLAN in FlexConnect APs, because FlexConnect group configuration you can maps the WLAN id in some VLAN and all APs that you add in this flexconnect group will get this configuration without the necessity to access each AP and map VLANs individually, because all APs inside this flexconnect group will get the VLAN information in that WLAN id.
But when you create the FlexConnectGroup is important to add the same group in both wlcs and add the APs mac address in both WLCs FlexConnect Group, because when one access point associates to WLC01 it receives a FlexConnectGroup configuration and when go to the WLC02 it needs to receive the same configuration.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_010001010.html#d34284e1680a1635
I hope it helps.

Motion Library Access

Motion Library shows zero Particle Emitters, Replicators, Shapes and Text Styles. However they can be accessed through File Browser via User/Shared/Motion. They are in fact on my hard drive. I have Motion Preferences for Content Library and Templates pointed the hard drive. Motion accesses Behaviors, Filters and Generators through the Library tab. How to access the PE, R, S and TS through Library tab in browser?

Do you by chance have anything in the search field left over from an earlier search? Motion continues to filter by whatever is in there until you clear it out.

How to use Flex tag library in jsp

Hi All,
We are planning to use flex in our J2EE application in order
to show some charts. Our j2ee application is in JSP,Struts. I have
searched on google about this and found that I can include flex 3
tab library in the jsp in order to use mxml tag in the jsp. I have
written a sample program in the jsp which uses flex.
<%@ taglib uri="FlexTagLib" prefix="mm" %>
<SCRIPT LANGUAGE="JavaScript">
function showMessage() {
message.value = "Use this application wisely";
function hideMessage() {
message.value = "";
</SCRIPT>
<mm:mxml border="5" onmouseover="showMessage();"
onmouseout="hideMessage();">
</mm:mxml>
<TABLE>
<TR>
<TD><input type="text" name="message"
size="50"></TD>
</TR>
</TABLE>
I have added entry inweb.xml. See below,
<taglib>
<taglib-uri>FlexTagLib</taglib-uri>
<taglib-location>/WEB-INF/tlds/flex-bootstrap.jar</taglib-location>
</taglib>
Following are the problems that I am currently facing.
1) Could anybody let me know whether the entry of
<taglib> tag is correct in the web.xml. Is it the correct
jar(flex-bootstrap.jar) that I should include?
2) If yes, from where to download it? or
If no, what is correct jar that i should include and how?
your response will be highly appriciated as this is the major
requirement in our project?
Thanks ,
Chandan

Hi,
Pleas find details at the URL below.
http://labs.adobe.com/wiki/index.php/Flex_2_Tag_Library_for_JSP
Hope this helps.

Flex swc library in Flash CS3 project

Is it possible to use a swc library created in Flex in a
Flash CS3 project?

Thank but It does not seem to work with Flex 3.0. I've tried
with the compiler "-compute-digest=false" option as suggested but
no luck. Do you have any idea?
Thanks

32 bit library to 64 bit

I am trying to load my 32 bit itunes library to a 64 bit. I have downloaded the 64 bit version of itunes and loaded my old 32 bit on to my new computer but when itunes trys to read it it is all commands and song info but no actual music and it doesn't register in my library. Help?

32-bit and 64-bit software cannot be linked together into a single
executable. There are several insurmountable differences including
a different stack frame format and different calling conventions.
64-bit software uses a programming model called LP64, which means
that longs and pointers are 64 bits. 32-bit software uses a model
called ILP32, which means that integers, longs, and pointers are
32 bits.
When you compile software for a 32-bit environment, which you can
do implicitly by not specifying an architecture or explicitly by
specifying -xarch=v8plusa on your compile line, your C and C++ long
variables are 32-bits. Many people carelessly assign longs and
pointers to ints, but they don't get caught because ints, longs, and
pointers are the same size in the 32-bit model.
When you compile software for a 64-bit environment, which you do
by specifying -xarch=v9a, longs and pointers become 64 bits. If you
assign a pointer to an int, you will lose the top 32 bits of the pointer
value and you will later be rewarded with a SIGSEGV that terminates
your program.

Motion library and inspector doesn't open

Hi all. I am using motion in FCS2, and suddenly, after upgrading my RAM, I can't open library tab, inspector tab, add behaviors, etc. All content is installed on the local HD, so it is not a case of missing files. I also couldn't find the preference file in ~/preferences folder.
How can I fix this issue?

The solution - trash pref file "com.apple.motion.plist", found in Users --> (Your Account) --> Library --> Preferences

Display Postscript Toolkit (dpstk library) for 64 bit Solaris

Does anyone know whether the
DPS Toolkit (dpstk library) is available for 64 bit Solaris operating systems?

Thanks for getting me to the troublemaker ArielK.
I can confirm disabling APSDaemon.exe, aka, new Apple Push for WiFi Sync and renaming (or deleting if you are more risk oriented) APSDaemon.exe and APSDaemon_main.dll in this folder "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" resolved my issue.
Alternatively, another slightly more annoying but less techy workaround for those nervous about changing filenames is to start iTunes in Safe Mode every time. You must do it via Programs > iTunes > hold down Ctrl-Shift then click iTunes (does not work if you do it by clicking a short cut in programs list or taskbar, whatever...). Maybe this disables WiFi Sync by default, dunno. Don't care at this point, but it seemed to work.
I can live without WiFi Sync for now, but its a nice feature I would really like to use in the future.
Apple please fix!!!
Running: Windows 7 Home Premium x64, iTunes 10.5.2.11.

Need help moving iTunes library. 32 bit to 63 bit

I am going to be moving my iTunes library. I have moved from a 32 bit OS to a 32 bit OS, and that is easy. Is there any difference when moving from a 32 bit to a 64 bit version of Windows, because I know that the install files are different.
Any help would be appreciated.

Easiest way would be to download a utility that does it for you.
For a utility, you should try YamiPod (http://www.yamipod.com).

Motion Library & Inspector non-functioning...

So I'm using my *MacBook Pro* to work on a client project & going back & forth between *FCP Studio*, Motion, & *After Effects*. Today I had a brilliant idea to do 4 point motion tracking but was having trouble getting AE to work the way I wanted it to & I knew Motion could do it. So I open a new project in Motion but I can't get the Inspector or the Library to appear. Clicking the icons does nothing. When I go to the *_Window/Show Inspector_* menu, the links for the Inspector & the Library are grayed out (this is with the project open). It won't let me click on Behaviors either. So basically I can import & export... which does me absolutely no good if I can't add effects & behaviors.
So I downloaded the latest update for Motion. Then when I try to install the update, it tells me I am not authorized to use that update because I do not have Motion installed in my *_Applications Folder_*... um, yes I do.
So since I have files rendering on two other iMacs in our studios, I decide to go ahead & reinstall *FCP Studio* on my *MacBook Pro*. 4 hours later, everything's reinstalled. I launch Motion: +_*STILL NO LIBRARY OR INSPECTOR.*_+ Doh.
Any ideas?

Great thread. I was hearing somewhere that the Motion import/export did not work if I did not have Win AE on the same machine. ?? TRUE I'll keep AE, PS on my pc and let Mac do its thing as i hear its slower running Win on the mac. I'd like to keep each clean and still share file if possible. Your other questions are still not in my realm of expertise yet. !
Good to keep up with what works going between the 2.

Linux and Java are 64 bit. The native library is 32 bit. Any workaround?

Folks,
I am trying to run some java cipher/decipher programs that rely on native code (code which connects through the network to an HSM box).
The issue is that theboth Linux kernel and JVM are 64 bit. But the native library seems to be 32 bit. I get the following message when trying to run the sample:
Exception in thread "main" java.lang.UnsatisfiedLinkError: jcryptoki (/opt/Eracom/lib/libjcryptoki.so: wrong ELF class: ELFCLASS32)
at java.lang.ClassLoader.loadLibraryWithPath(ClassLoader.java:981)
at java.lang.ClassLoader.loadLibraryWithClassLoader(ClassLoader.java:950)
at java.lang.System.loadLibrary(System.java:453)
at jprov.cryptoki.Cryptoki.<clinit>(Cryptoki.java:38)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:194)
at au.com.eracom.crypto.provider.ERACOMProvider.<clinit>(ERACOMProvider.java:329)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:194)
at SHA512Generator.main(SHA512Generator.java:10)Is there any workaround or should I contact my HSM vendor and ask for a 64 bit version of this native library?

Is there any workaround or should I contact my HSM vendor and ask for a 64 bit version of this native library?That would certainly be the best step so it should certainly be the first one.

Flex motion library in 64 bits

Similar Messages

Maybe you are looking for