Flex security error message

Ok, so when I pass in a user:pass with the url, it works
inside Eclipse, HOWEVER when I export my project and run it from
it's exported location (on my local box and the server), I get the
following error:
faultCode:Channel.Security.Error faultString:'Security error
accessing url' faultDetail:'Destination: DefaultHTTP'
What does this mean?

The flash player enforces a variety of security rules. Most
if not all of these
are turned off when running from eclipse. One of the rules is
you are not allowed to access a url from a different domain then
your flex application swf file was
served from.
So you flex app comes from
http://myserver:8080/MyWeb/myFlex.html
but you are trying to access
http://otherServer:9000/something.xml
So you have two choices:
Put a crossdomain.xml file in the root of otherServer or
write a proxy
for myServer that forwards your requests.
Look in the doc for the crossdomain.xml format. It's a bit
vague as to the location. They just say the ROOT of the webServer.
In tomcat that is in webapps/ROOT other web servers may be
different. To test
if your crossdomain policy file is in the correct spot you
should be able to see the file by entering
http://otherServer:9000/crossdomain.xml

Similar Messages

How do I stop security error messages being displayed?

Multiple messages are displayed when I'm in hotmail saying "Due to Mozilla's security features a link was blocked" etc. It says there was a security error and gives long references. I have to close these messages down before my page will load properly, otherwise the page width is extended and I have to scroll to see things.

Hi,
I have a smiliar problem. And I wish I had an answer to yours! It seems that nobody knows the answer! I want to change the mobile phone number which people see when I send txt messages over skype. It confuses people when they see my Australian number (the one originally registered in skype) when I am overseas, people always think I am in Australia. The problem is I can never seem to remove that number I originally used when I set up skype a few years ago. I have changed every instance in skype (profile page etc) where the number appeared but it still displays when I send messages... Anyone know?? Thanks!

"Security error accessing url" error in Intranet Flex Development

Hi,
I have a simple Flex application with a Tree control that load data from a XML file on my intranet site using HTTPService. The Tree control pull in data without any problem if I ran the Flex app locally, however I would get "Security error accessing url" if I copied the Flex application to my intranet server and access it. The Flex SWF files and the XML file are in the same directory.
I thought there shouldn't be any cross domain security issue since both files are in the same domain/directory.
Any idea what is going on?
Thanks
xkxTnT

Thanks Guys for trying..
I figured out the problem - I initially create the project without server configuration, so the SWF runs off my local file system, I later set the server to local ColdFusion MX 7 server, the SWF still ran without problem, I then copied them to the production server and got the security error message.
Yes, I am pretty sure they are the same domain - the SWF files in in http://intranet/Flex and the url for HTTPService is http://intranet/Flex/data.xml.
I later solved the problem by creating a new project with server set to local ColdFusion server, copied the exact same code and data file, it ran find on http://localhost/Flex, and again ran without problem after deploying to the intranet server http://intranet/Flex.
I guessed Flash Builder compiled the code a little differently depending on the project configuration (server or no-server)? Not know the detail, or why does it even matter..
xkxTnT

Error message when testing Submit by Email button

I used Adobe LiveCycle for the first time to create a form. I added both a Submit by email and Print buttons. When I go to Adobe Professional to test my form to email, I get an security error message that the documet is trying to connect to my email address as the correct domain. I then have the option to Allow or Block. When I click Allow nothing happens and I don't get the email in my inbox.
Please assist as I need to send out this form and want users to be able to send w/out an issue.
Thanks.

You have multiple options to sending whole PDF format.
1) Set the submit button to submit whole PDF format by using a mailto: [email protected] in the submit button action URL.
2) Set the submit button to fire a javascript that submits whole PDF format. See Adobe's Javascript reference guide for instructions.
Note: Methods #1 and #2 require Adobe Acrobat or Extended Reader Rights; because, Adobe Reader users are restricted to submitting just the data formats; such as FDF,XML, XFDF, XDP, and HTML. Beware extending reader rights to a PDF form using Adobe Acrobat places end user EULA restrictions, such as not more than 500 end user submissions for each form.
My Recommendations:
#3) Set the submit button to point to a URL of a server-side script; such as ASP.net. Then set the format to a data format; such as FDF, XML, XFDF, or XDP; and use ASP.net and iTextSharp (Free) to merge the data with a blank PDF form; and attach the submission to an outbound SMTP mail message and send without 3rd party email software such as MS OUTLOOK.
#4) A combination of #1 and #3; where you enable usage rights on the PDF using Adobe Acrobat; and send to a server-side script which bypasses client-side email software.
Check out the following website for online examples that submit to a server side script:
www.pdfemail.net/examples/

Multisim 8 student suite when trying to load gives me a security error.

I recently purchased Mulitsim 8 Studentsuite and once installed I try to open it and all it does is give me a popup box that says security error. Can some one give me ideal on what to do or how to fix.

roverton,
Security error message is -most of the times- related to not having proper administrator privileges in several folders of your installation. Here is a knowledgebase that will help you resolve this issue.
http://digital.ni.com/public.nsf/allkb/b06773ce511c7e588625720b00502b8e
Follow the instructions from this KB, however, make sure that you apply the same security settings to the following folders -which are the install path-:
EWB9\Database
EWB9\Settings
EWB9\Multisim Users
If you have Multisim 8, it should be the same, instead of EWB9 is EWB8. The main objective is to give to any user the Full Control setting for those folders.
Nestor
National Instruments

Because of security error...... - X509 Certificates problem

Good Morning everyone.
I`ve got W2008 R2 with Terminal License already activated by telephone. My server is running and is active, I`ve got licenses (CAL 5 per User). Despite this fact my server still creates X509 Certifictates, which block my second, third, etc connection to
server.
Other workstation - Windows XP - try to connect via RDP to server and use RemoteApps (IE, Acrobat Reader). Connection was working in "trial version" of Terminal Server - 120 days, but when I`ve activated it, install all licenses can`t connect
to server, cause "Security error" message. I found that X509 Cert. are the reason and I should activate server as Terminal License Server using phone activation with Microsoft and then other certificate will be create, but not. I`ve done this
several times, with deleting X509 entriers in Windows Registry, restart server. Every time, when workstation is trying to connect to W2008 Server new X509 are creating in Registry and error message apears.
Could You help me please in this case?
Best Regards.
Dawid

Hi Dawid,
Thank you for your posting in Windows Server Forum.
Initially please check whether you have RDP 7 installed on Windows XP as suggested by TP. In addition, suggest you to try creating new certificate and check the result. please check below articles.
1. Create Trusted Remote Desktop Services (RDP) SSL Certificate
2. Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
Hope it helps!
Thanks,
Dharmesh

Security Error when creating a web service with Flex

Hello comminuty.
I'm using Flex to create a standalone application and I have to use web services to retrieve data from SAP.
I used the bapi bapi_flight_getlist to create an associated WS that works fine (tested with the Eclipse's WS Explorer).
In Flex Builder, I use the following code to create my web service:
     <mx:WebService
          showBusyCursor="true"
          id="service"
          wsdl="{wsdl}"
          result="resultCreateWSHandler(event);"
          fault="faultCreateWSHandler(event);">
            <mx:operation name="FlightGetList"
                 result="resultWSHandler(event)"
                 fault="faultWSHandler(event)"></mx:operation>
        </mx:WebService>
And this is the error I'm getting:
(mx.messaging.messages::ErrorMessage)#0
body = (null)
clientId = "DirectHTTPChannel0"
correlationId = "E578ED8C-EF29-44E7-8D57-57B4DB6EB613"
destination = ""
extendedData = (null)
faultCode = "Channel.Security.Error"
faultDetail = "Destination: DefaultHTTP"
faultString = "Security error accessing url"
headers = (Object)#1
    DSStatusCode = 0
messageId = "6E7AC45E-418D-90CD-96AD-57B52DB1DAF4"
rootCause = (flash.events::SecurityErrorEvent)#2
    bubbles = false
    cancelable = false
    currentTarget = (flash.net::URLLoader)#3
      bytesLoaded = 0
      bytesTotal = 0
      data = (null)
      dataFormat = "text"
    eventPhase = 2
    target = (flash.net::URLLoader)#3
    text = "Error #2048: Violation de la sécurité Sandbox : http://localhost:8300/ztest2/bin-debug/ztest2.swf ne peut pas charger de données à partir de http://XXXX:8006/sap/bc/srt/wsdl/bndg_DEB8A28C2E19EEF19C080050568D135B/wsdl11/allinone/ws_policy/document?sap-client=800."
    type = "securityError"
timestamp = 0
timeToLive = 0
Translation: "Error #2048: Sandbox security violation: http:....swf cannot load data from http:...client=800"
Would any of you have an idea about what is causing this error??
Thanks for any help you can provide.
Regards,
C.

Hi Cristina
Did your flex application worked. i am also having same problm. cant access the BAPI from standalone flex application.
Jay

Urgent requirement : security error accessing url and http error: standalone flex

Hi,
I have a requirement to create record from standalone flex. I am using Flex builder 3.
I used Flex-force toolkit to login to salesforce. The swf file generated when used internal to salesforce it works great.
But my requirement is to run it from public sites page / standalone pages. How will I configure it? I am getting error 'security error accessing url', default HTTP
The requirement is on priority, please help me to resolve this issue.
The login code is also furnished below. please help.
Full error details:
(com.salesforce.events::ApexFaultEvent)#0
bubbles = false
cancelable = true
context = (null)
currentTarget = (null)
eventPhase = 2
fault = (mx.rpc::Fault)#1
    content = (null)
    errorID = 0
    faultCode = "Channel.Security.Error"
    faultDetail = "Destination: DefaultHTTP"
    faultString = "Security error accessing url"
    message = "faultCode:Channel.Security.Error faultString:'Security error accessing url' faultDetail:'Destination: DefaultHTTP'"
    name = "Error"
    rootCause = (flash.events::SecurityErrorEvent)#2
      bubbles = false
      cancelable = false
      currentTarget = (flash.net::URLLoader)#3
        bytesLoaded = 0
        bytesTotal = 0
        data = (null)
        dataFormat = "text"
      eventPhase = 2
      target = (flash.net::URLLoader)#3
      text = "Error #2170: Security sandbox violation: file:///C|/Users/R/DOCUME%7E1/FLEXBU%7E1/TESTLO%7E1/BIN%2DRE%7E1/TESTLO%7E1.SWF cannot send HTTP headers to https://login.salesforce.com/services/Soap/u/14.0?1000.1153011256829."
      type = "securityError"
headers = (null)
message = (mx.messaging.messages::ErrorMessage)#4
    body = (null)
    clientId = "DirectHTTPChannel0"
    correlationId = "B8A1B02E-CE17-DCBA-4894-F2E4CBEB7C04"
    destination = ""
    extendedData = (null)
    faultCode = "Channel.Security.Error"
    faultDetail = "Destination: DefaultHTTP"
    faultString = "Security error accessing url"
    headers = (Object)#5
      DSStatusCode = 0
    messageId = "41F6A90D-ECAE-EA2D-7C84-F2E4DABD72F3"
    rootCause = (flash.events::SecurityErrorEvent)#2
    timestamp = 0
    timeToLive = 0
messageId = "41F6A90D-ECAE-EA2D-7C84-F2E4DABD72F3"
statusCode = 0
target = (null)
token = (mx.rpc::AsyncToken)#6
    message = (mx.messaging.messages::HTTPRequestMessage)#7
      body = "<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/"><se:Header xmlns:sfns="urn:partner.soap.sforce.com"/><se:Body><login xmlns="urn:partner.soap.sforce.com" xmlns:ns1="sobject.partner.soap.sforce.com"><username>uname</username><password>pwdandsec token</password></login></se:Body></se:Envelope>"
      clientId = (null)
      contentType = "text/xml; charset=UTF-8"
      destination = "DefaultHTTP"
      headers = (Object)#8
        DSEndpoint = "direct_http_channel"
      httpHeaders = (Object)#9
        Accept = "text/xml"
        SOAPAction = """"
        X-Salesforce-No-500-SC = "true"
      messageId = "B8A1B02E-CE17-DCBA-4894-F2E4CBEB7C04"
      method = "POST"
      recordHeaders = false
      timestamp = 0
      timeToLive = 0
      url = "https://login.salesforce.com/services/Soap/u/14.0?1000.1153011256829"
    responders = (Array)#10
      [0] (::SalesForceResponder)#11
    result = (null)
type = "fault"
Login code:
[Bindable] public var sfdc:Connection = new Connection();
private function login():void {
Security.loadPolicyFile("http://salesforce.com/services/crossdomain.xml");
var lr:LoginRequest = new LoginRequest();
lr.username = "uname";
lr.password = "pwdtoken";
sfdc.protocol = "https";
sfdc.serverUrl = "https://login.salesforce.com/services/Soap/u/14.0";
lr.callback = new AsyncResponder(loginSuccess, loginFault);
sfdc.login(lr);

This is resolved.
I have copied the crossdomain.xml file to tomcat Root folder
and the issue is resolved.

Security Error in accessing Web service from Flex.Where to put crossdomain.xml in axis container?

Hi guys.
Typically webservices are invoked across domains. Flash has defined certain policies which prevent crossdomain access. The only way to bypass this security feature is to put a crossdomain.xml file within the server root of the webservice provider i.e. in our case at http://abc.com. A sample example of crossdomain.xml is as below:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
     <site-control permitted-cross-domain-policies="all" />
     <allow-access-from domain="*" secure="false"/>
     <allow-http-request-headers-from domain="*" headers="*" secure="false" />
</cross-domain-policy>
If the crossdomain.xml is not added the developer will get “Security Error accessing URL” type of messages.
The above mentioned information should be enough for you to get your flex based WebService client up and running.
We are using axis2 to build webservices. We deployed the webservices under axis2 container under repository/srvices folder . But in Flex when we try to call the webservices we were getting the exception saying security error in accessing url. The solution is we need to put the crossdomain.xml o that it is loaded at runtime and allow us to access. In tomcat if we put the file under ROOT directory we could accss the file and we were able to access the webservices deployed under Tomcat. But I googled for Axis2 container and couldnt find any solution.
Please post the reply if anyone knows the solution to it.
Thanks
Raja

Hi. So, I did take a quick look at the Axis2 standalone server and didn't see any way to server up a file such as crossdomain.xml. It seems like it might be a useful enhancement to have the ability to serve up files even if this functionality was very simple/limited and nothing like a full blown http server.
I'd log an enhancement request against axis2 if this is something you'd like to have.
http://issues.apache.org/jira/browse/AXIS2
-Alex

Publishing my flex application in external server (Channel.Security.Error error Error #2048)

when i publish my flex application in an external server i get that error if my flash builder beta 2 is closed in my system , i did configure an endpoint to the dataservice to point to the external server and if i run my flash builder and any body browser the site it open and they can access the data from my application but if i close my flash builder we have this error all of us
Send failed
Channel.Security.Error error Error #2048: Security sandbox violation:
http://www.dcecrak.com/Maine.swf cannot load data from
http://localhost:37813/flex2gateway/?hostport=www.dcecrak.com&https=N&id=-1. url:
'http://www.dcecrak.com/flex2gateway/'
i created a crossdomain.xml file and put it in the web root , if i try to open the link http://www.dcecrak.com/flex2gateway it open with blank page this means that every thing is oky , my service-config file looks like that :
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service-include file-path="remoting-config.xml" />
        <service-include file-path="proxy-config.xml" />
        <service-include file-path="messaging-config.xml" />
    </services>
    <security>
        <login-command class="flex.messaging.security.JRunLoginCommand" server="JRun"/>
        
        
    </security>
    <channels>
        
<channel-definition id="dcecrak" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://www.dcecrak.com/flex2gateway/" class="coldfusion.flash.messaging.CFAMFEndPoint"/>
            <properties>
                  <add-no-cache-headers>false</add-no-cache-headers>
                        <polling-interval-seconds>8</polling-interval-seconds>
                        <serialization>
                              <enable-small-messages>false</enable-small-messages>
                        </serialization>
                        <coldfusion>
                            
                              <access>
                                    
                                    <use-mappings>true</use-mappings>
                                    
                                    <method-access-level>remote</method-access-level>
                              </access>
                              
                              <use-accessors>true</use-accessors>
                              
                              <use-structs>false</use-structs>
                    <property-case>
                        
                        <force-cfc-lowercase>false</force-cfc-lowercase>
                        
                        <force-query-lowercase>false</force-query-lowercase>
                        
                        <force-struct-lowercase>false</force-struct-lowercase>
                    </property-case>
                        </coldfusion>
            </properties>
        </channel-definition>
        <channel-definition id="cf-polling-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/cfamfpolling" class="coldfusion.flash.messaging.CFAMFEndPoint"/>
            <properties>
                <polling-enabled>true</polling-enabled>
                <polling-interval-seconds>8</polling-interval-seconds>
                        <serialization>
                              <enable-small-messages>false</enable-small-messages>
                        </serialization>
                        <coldfusion>
                            
                              <access>
                                    
                                    <use-mappings>true</use-mappings>
                                    
                                    <method-access-level>remote</method-access-level>
                              </access>
                              
                              <use-accessors>true</use-accessors>
                              
                              <use-structs>false</use-structs>
                    <property-case>
                        
                        <force-cfc-lowercase>false</force-cfc-lowercase>
                        
                        <force-query-lowercase>false</force-query-lowercase>
                        
                        <force-struct-lowercase>false</force-struct-lowercase>
                    </property-case>
                        </coldfusion>
            </properties>
        </channel-definition>
        <channel-definition id="my-cfamf-secure" class="mx.messaging.channels.SecureAMFChannel">
            <endpoint uri="https://{server.name}:{server.port}{context.root}/flex2gateway/cfamfsecure" class="coldfusion.flash.messaging.SecureCFAMFEndPoint"/>
            <properties>
                <polling-enabled>false</polling-enabled>
                        <add-no-cache-headers>false</add-no-cache-headers>
                        <serialization>
                              <enable-small-messages>false</enable-small-messages>
                        </serialization>
                        <coldfusion>
                            
                              <access>
                                    
                                    <use-mappings>true</use-mappings>
                                    
                                    <method-access-level>remote</method-access-level>
                              </access>
                              
                              <use-accessors>true</use-accessors>
                              
                              <use-structs>false</use-structs>
                              <property-case>
                        
                        <force-cfc-lowercase>false</force-cfc-lowercase>
                        
                        <force-query-lowercase>false</force-query-lowercase>
                        
                        <force-struct-lowercase>false</force-struct-lowercase>
                    </property-case>
                        </coldfusion>
            </properties>
        </channel-definition>
        
        <channel-definition id="java-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        <channel-definition id="java-secure-amf" class="mx.messaging.channels.SecureAMFChannel">
            <endpoint uri="https://{server.name}:{server.port}{context.root}/flex2gateway/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/>
        </channel-definition>
        <channel-definition id="java-polling-amf" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/amfpolling" class="flex.messaging.endpoints.AMFEndpoint"/>
            <properties>
                <polling-enabled>true</polling-enabled>
                <polling-interval-seconds>8</polling-interval-seconds>
            </properties>
        </channel-definition>
        
    </channels>
    <logging>
        <target class="flex.messaging.log.ConsoleTarget" level="Error">
            <properties>
                <prefix>[BlazeDS] </prefix>
                <includeDate>false</includeDate>
                <includeTime>false</includeTime>
                <includeLevel>false</includeLevel>
                <includeCategory>false</includeCategory>
            </properties>
            <filters>
                <pattern>Endpoint.*</pattern>
                <pattern>Service.*</pattern>
                <pattern>Configuration</pattern>
                <pattern>Message.*</pattern>
            </filters>
        </target>
    </logging>
    <system>
        <manageable>false</manageable>
        
    </system>
</services-config>
and my crossdomain.xml looks like that :
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
<allow-access-from domain="localhost" to-ports="*" secure="false"/>
<allow-access-from domain="*" to-ports="*" secure="false"/>
<allow-http-request-headers-from domain="*"/>
</cross-domain-policy>
really its strange only the site works if my flash builder is running , please help

Thanks all for your attention, i have solved my problem and i think its a bug in the flash builder , the problem was that when you compile the application and you enabling Network Monitoring , the communication of the AMF channels done throw the http://localhost:37813/flex2gateway/
and that was the problem if you close the flash builder on your system that getaway dose not exist and on the hosted server there is no such address localhost by this port also so the client application witch is catch in you system try to access your localhost and that cause a security error and the address is also not exist .
so the solution or we have to compile the project after we disable the Network Monitoring in flash builder .

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

Every time I try to log into ANY website that is secured, I get an error message "This connection is untrusted."

The error message is:
This Connection is Untrusted
You have asked Firefox to connect securely to www.facebook.com, but we can't confirm that your connection is secure.
Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could mean that someone is trying to impersonate the site, and you shouldn't continue.
www.facebook.com uses an invalid security certificate. The certificate is not trusted because no issuer chain was provided. (Error code: sec_error_unknown_issuer)
If you understand what's going on, you can tell Firefox to start trusting this site's identification. Even if you trust the site, this error could mean that someone is tampering with your connection.
Don't add an exception unless you know there's a good reason why this site doesn't use trusted identification.
Steps I have take so far:
Verified that system clock is correct
Cleared all cache, history, cookies, etc.; didn't help
Started Firefox in Safe Mode; didn't help
Disabled all Firefox extensions; didn't help
uninstalled and reinstalled Firefox using Control Panel; didn't help
Ran Microsoft Safety Scan for malware; nothing was found
Other information:
This problem exists ONLY in my user profile and ONLY in Firefox. All 5 other users can run Firefox with no problem. I can run IE and Chrome with no problem.
Problem exists in ALL secured (https) sites.
I use Avast and Windows Firewall. Had never heard of ESET or BitDefender before searching these forums.
A lot of the sites don't give me the option to Make an Exception. The two that I tried to make exceptions for, still wouldn't open.
Run Windows 7 64-bit

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

Flex encounters "Security error accessing url.Unable to load WSDL"

i have created a flex application which connects to SAP via web service.
when i try to run my flex application i encounter the following error.
"Security error accessing url.Unable to load WSDL"
i went through various posts relating a BSP application and crossdomain.xml
i have created the crossdomain.xml file in the application and
i tried those options and still not able to figure out the problem.
the security error is because of the absence of the crossdomain.xml file, and in which path should i be saving the file?
Kindly help me solve the problem.
Thanks in advance.

Have you seen this blog
"Crossdomain.xml" in ABAP Web AS Server cache

I keep getting the following error message: "Could not initialize the application's security component." Firefox then crashes when I try to enter a secure website. Help?

The exact error message is: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features." I am on a MacBook and have been using Firefox for years without any problem until now.

Can you access other apps? Can you acess the internet? Can you access applications that use internet besides facebook?
If answer is yes to all of these; contact Facebook.

I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?

I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?

I figured that was the case, but I've used the same passcode for years and I can't seem to figure out how I managed to screw it up when I set up my phone. Without being able to access my phone for a restore, how would I accomplish this? iTunes? Thank you very much for you help!

Flex security error message

Similar Messages

Maybe you are looking for