Floating Panels that don't go away on Minimize!?

I've been painting away and pulled out the Layers and History Panels; so they're floating, so to speack. I then Minimised PS, using the Yellow Button. The window minimized, but the Layers and History Panels stayed on screen!!?
So what caused that. is it an error, bug, or just something I've done?
Regards
Richard

Hi and thanks for prompt reply!
I have to use Hide.
I didn't think the Panels would be treated as windows, quite strange!
If you Minimize the Panels they are just reduced in size... so this Minimize related to PS.
No major problem!
thanks again!
Richard

Similar Messages

  • Screen blotches that don't go away.

    randomly i was watching a video and some mysterious Grey/green/red mini pixels and its growing and expanding. please help me

    coolcarl222, Welcome to the discussion area!
    I'm not sure how you ended up in the Time Capsule discussion area. Your question has nothing to do with a Time Capsule, nor wireless networking.
    Your system information indicates Windows and a non-Apple computer so I'm not sure why you posted at the Apple site at all.

  • Have a number badge in settings that won't go away and there are no updates that need to be done.  Help!!!

    On my settings, there is a number one (red) that won't go away.  There are no updates that need to be done.

    Maybe you should try updating 5.1.1 from iTunes? Because I had the same thing and it was 5.0.1.

  • I don't want iCloud. How do I get iTunes to stop popping up the panel that asks me if I want to download the iCloud Control Panel? I'm using iTunes 11 on Windows Vista.

    I don't want iCloud. How do I get iTunes to stop popping up the panel that asks me if I want to download the iCloud Control Panel? I'm using iTunes 11 on Windows Vista.

    Why do you believe iTunes is causing this to occur?
    What is the exact wording of the message?
    I'm running iTunes on Windows 7 and never gotten that message.

  • T510: display issues(Bright pixels that wouldn't go away) -support?

    Shortly after purchasing a new T510, I started to have problems with the display (Bright pixels that wouldn’t go away).  I figured it was a BIOS or driver issue.  However as my company purchased about 80 of these machines and I turned out to be the only one with the issue, I called support.
    I also purchased the onsite 24hour support for three years, so I called Lenovo and in a couple days (not 24hours) they came in a replaced the LCD panel, which they assured me was the issue.  Not even an hour or two after the repair tech (David) left the problem started happening again.
    I called back and Lenovo now indicated it has to be the motherboard.  Ok, so a couple days later David came in and replace the motherboard.  Now I purchased these units fully loaded, discrete graphics extra memory, high res, etc.  The motherboard they replaced it with did not have the Nvidia card, instead just the onboard graphics, which A. is no what I purchased, and B. not equivalent or better.
    So David ripped out the new inferior board and put the old broken one back in, so I could at least continue with my job, with the intermittent pixel issue. I should also mention the screen went blurry at the same time the pixel issue happened, so I would have to reboot to restore the monitor.  David then ordered another Motherboard.
    A week went by and no one called me back, so I called Lenovo again to find out what the heck was going on and why I didn’t have a new one ready in waiting within 24 hours. I was informed that is not how the warrantee works, only that they will respond in 24 hours and that the verbiage on their site around the warrantee was not perfectly clear.  Wow. OK…  I then asked when they expect to have this fixed and it turns out the part I need is on back order.
    The part finally arrives. In another 4-5 days, however, I have a business trip coming up and I can’t risk yet another defective part. With my current flaky monitor I can at least get by.  So I schedule a time with David the repair tech to swap it out when I return.
    I get the new Motherboard installed and I get all these video errors and other things start going horribly wrong.  David indicates it is a driver/bios issue and I need to upgrade/install drivers to remedy it.  Okay, so I do that, spend hours trying to get it to work. Turns out this motherboard is even worse and it crashes every time I try and use an external monitor or if the Nvidia 3100 kicks in for hardware acceleration.
    I continue to work under the belief that this is a driver issue and try to fix it, however one of the MANY crashes ends up corrupting my Window 7 install, now throwing blue screens all the time and destroying my development env in the process. So I rebuild the machine and it just keeps happening.  This is now days of lost work that I can’t bill for.
    I call Lenovo again to try and get this lemon replaced.  I get a hold of Jerome who punts me to Lenton, who punts me to Nate Bennet.  Nate seems like a reasonable guy and informs me that at their level of service they can only repair the units and are happy to continue working through this. By now this is gone on long enough and I want to have the laptop replaced, 1 out of 80, this one is a lemon. Nate appears to agree and kick off an escalation process to have this case reviewed and informs me that someone will call me back in 24-48 hours (business days that is).  Okay this is still incredibly inconvenient, but at least I believed we are making forward progress.
    36 Hours goes by and no one calls me back, so I call Lenovo yet again.  I get a hold of Julius.   Julius informs me he’ll have a supervisor call me back right away, as there was not one available.
    48 hours later I call Lenovo again, as you can guess no one has called me back.  I get a hold of Michael.  I again explain the whole situation to Michael and ask to speak to a supervisor, again...  Which again I’m informed is not possible as there is not one available.  Michael indicates that he’ll have a supervisor call me back.  This time I say I can wait on the line because that is what everyone else told me and nothing happened.  Michael then informs me that he is Michael and would not let that happen and assured me that a supervisor would call me back right away. I relent; verify my contact info with Michael and it all seems to be accurate.
    So again nearing the end of the day no one has called me back, I call Lenovo yet again.  This time I get a hold of Phil.  I once again explain the whole situation.  Phil is very apologetic, but still is unable to produce a supervisor.  Phil indicates he’ll put sticky notes on his supervisor’s machine to contact me back. I guess these guys are probably using a T510 as well and can’t read their email either.
    I ask for the name of this supervisor because clearly Lenovo is filling me with horse s&^% at this point.  There is a clear pause and all he says it "Carter.., that is his last name I don’t know his first name." Okay really, so you know this guy well enough to put sticky notes on his monitor, but you only know his last name.  Now I know I’m being lied to, but what can I do.
    So here I am with a busted laptop that crashes at least 3-4 times a day I can’t use the discrete graphics that I paid for and only supports the LCD panel built into it.  In previous experience, with a different manufacturer, after the first few failed attempts they would have replaced the unit.  I guess I should be angry with the guy that convinced us to give Lenovo machines a try for the next refresh (That was me by the way).
    I really have no idea how to proceed with this one.  This is first time in my career that I have ever been treated like this.  I really have no idea what to say.
    Moderator Note: Edited subject to match content.

    technoone wrote:
    " but it seems an awful lot like that subject line was changed to, well, make sure less people would click through and read your post.".
    I'd like to give you the benefit of the doubt on this one, there is a message at the top of the forum stating: 
    "Welcome to Lenovo's Discussion Community!  Please note our guidelines when posting."
    if you read the Forum Guidelines it states quite clearly;
    Title threads appropriately
    . The title of a thread should accurately reflect the subject of the discussion and be as technically specific as possible.  Avoid inflammatory or emotional statements that do not aid the development of the conversation. Thread titles are indexed not only for search functions within the forum, but often externally in Google, Yahoo, etc. Proper thread titles will aid the active members of the Lenovo community, as well as non-members who may be searching more broadly. Example of a good thread title: T Thinkpad Blue Screens after suspend . Example of a bad thread title: Stupid computer locks up - worthless piece of junk. Moderators may alter thread titles to be more meaningful if less than appropriate titles are chosen.
    I'm certain the edited title represents the actual real hardware problem at hand better than the original because it's more descriptive and accurate and will therefore attract the attention of the members who have experienced the same or similar situations to comment and offer advice based on their experience.
    Please do take time to read our guidelines as I'm sure you'll find some other helpful and informative tips in them.
    Regards
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Why no floating panels?

    Is there a reason Speed Grade doesn't use floating panels like other Adobe products?
    I really like having my tools on one screen and my output monitor on another screen. I find it difficult to be confined to one monitor, I'm constantly zooming in and out while adjusting the look of my footage.

    If you go to Settings > Display you can check the "Enable" box for Dual Display Output. This will put your monitor on your 2nd display
    Just note that there's a bug - if you don't see your monitor on your 2nd display after enabling it in the settings, try adjusting the numbers in the Window Size (same place: Settings > Display) and hit Enter after adjusting a number. This will fix the bug - now you can put the numbers back to the original/correct size and hit Enter

  • DW CS6 - Spry collapsible panels - How to have panel close when you click away from it?

    I know typically onmouseout is used to close other items, but I could not figure it out with the spry collapsible panel. I have the panel opening onclick and closing onclick, but I would really like for it to close when you click anything else on the page outside of the panel.
    Thank you!

    Sorry, I did not mean other collapsing panels close when you click away from it. I simply meant in general for the closing after clicking away function, you can use onmouseout. I was working on something with collapsing panels and I wanted it to show the information when you clicked on it, but when you click on another panel, they both remain open. I really want both to close. I believe accordion does this, but not quite what I am looking for either.
    Here is a better example of what I would prefer: Houston Public Library
    If you visit their page and click "Find it" a box pops down with information and then when you click anywhere else on the screen, it closes that box. When you click "Research," it closes the "Find It" box and opens the "Research" box. There is likely a much better way to do this, but I am pretty new to this.
    Any assistance is very much appreciated.
    Thank you!

  • Report based on fact tables that don't have the same dimensionality

    Hi all
    I want to combine in the same report different measures from different fact tables that doesn't have the same dimensionality,for example:
    measure 1 linked to dimensions : time geography and product
    measure 2 linked to dimensions : time and geography
    Currenctly when I create a report like:
    time----gepgraphy---product------measure 1-----measure 2 I don't have any data for measure2 because it's not linked to the product dimension.
    The exact report is year---store name---product area name----- store sales-----number of visitors : the number of vistors doesn't have any relation with the product dimension.
    Is there a way to create this kind of report??
    Regards

    Don't take this the wrong way guys, but I feel compelled to say this before the answers start coming in:
    This issue had been discussed already many times. Stijn, John, Kishore etc. have all answered this question for the one or the other user. This forum has a search functionality for a reason. To first look for information and then ask your question. Why wait - potentially - a couple of hours for an answer that's one search away?
    Seriously people. It's not like forums magically appeared in 2k7...they've been around for quite a while now and netiquette and common sense with regards to posting should become normal.
    Cheers,
    C.

  • Polling for active floating panel in LV7.0

    My application has many windows open simultaneously (flexible, configurable data display, each running in its own thread). In previous versions of labview, I used the fp.frontmost propery to arrange the window stack periodically. This is clumsy, and the new Floating Panel feature significantly cleans up the window management.
    However, I need a way to know which window the user last activated when all open windows are set to 'floating'. I used to poll the fp.frontmost property, but this is no longer an effective way of doing this, since no floating window shows as frontmost. Ideally, a 'front panel activated' event would work, but that doesn't exist. Is there another way?
    Thanks!

    I do not understand why IsFrontmost not doing what you want. I created two VIs that poll the IsFrontMost property and made them floating. Whenever one of them is frontmost, the property is true. I attached the two VIs below to facilitate our discussion.
    Attachments:
    Untitled.vi ‏15 KB
    Untitled1.vi ‏15 KB

  • When I try to install flash player on my mac, I get to the panel that asks for my name and password, and it will not take my password.  tried changing to a new password and same result

    When I try to install flash player on my Mac, I get to the panel that asks for my name and password, but it will not take my password.  Tried changing the password, but same result.  Suggestions??

    This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
    If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt.  If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
    If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.

  • Possible to replicate cn=schema between masters that don't share a LDBM?

    I have multiple directory servers in my environment. One set has suffix A, another set has suffix B and a 3rd set has suffix C. I would like to replicate just the cn=schema between all of the masters for consistency reasons. Is it possible to replicate cn=schema between masters that don't share or replicate a user created database with each other?
    These servers are DSEE 6.3.1 and are all controlled by the same DSCC.
    Thank you,
    Matt

    I already know how to manually copy the 99user.ldif file to all of the servers. I am trying to get away from having to manually copy schema changes between servers every time a new attribute or objectclass is added to one set of servers.
    Is there a way to replicate the cn=schema DIT alone?

  • Can Adobe Configurator 3 create one panel that can be installed in other versions of Photoshop?

    Hi,
    I am able to create a new panel for CS5 and CS6, however, if I create a CS5 panel (thinking it should work in CS6 as well), when I try to install the panel ZXP file in CS6 Extenstion Manager, I am unable to do so...meaning, the CS5 panel will not load for users with CS6?  Is there any way to create a panel in Configurator 3 that will export one zxp (or similar package file) that can install in multple versions of Photoshop?
    I note in Configurator 2, I was able to export an mxi file that I could convert in Extension Magager 3 and that seemed to open without issue, however with Configurator 3, I don't see any other export options but zxp.  Any help on this would be great!  Thank you!!
    Evan

    Because of the difference of scripting interface of CS5 and CS6, Configurator cannot create a panel that works for multiple versions of Photoshop. You need to create two of them for CS5 and CS6. In your case, I suggest you create a panel of CS5, and then create a version of CS6 by clicking "Edit->Convert to CS6". (Some buttons will be lost if those buttons are not supported in CS6)
    Configurator 3 creates the zxp for you and you need not to create one with mxi file and Extension Manager.

  • Attempted to create a slideshow (version 9.3) and get the dreaded twiling ball that will not go away; iphoto locked up when open.  how do I get rid of the ball.  Have forced quit seveal times and opens with the ball p

    Attempted to create a slideshow (version 9.3) and get the dreaded spinning ball that will not go away; iphoto locked up when open.  how do I get rid of the ball.  Have forced quit seveal times and opens with the spinning ball.

    Make a temporary, backup copy if you don't have a backup copy of the library (select the library and type Command+D) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #1, followed by #3 and then #4
    Launch iPhoto and try again.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Since update, message appears that will not go away

    Since firefox update I have this message that will not go away:
    Browser settings change
    an unknown change was detected on your
    browser's search settings.
    0 keep my current settings
    0 I am aware of this change and approve it
    yes
    Since I am not aware of a change, I don't dare click yes
    for the second option

    *What does the message come from ?
    ** does it show in any of the Windows logs ? <br /> http://windows.microsoft.com/en-GB/windows7/What-information-appears-in-event-logs-Event-Viewer
    *Is it possibly from security software you already have installed ?
    Have you tried reading that articles in this thread linked from the blue text ?

  • Docking a floating panel

    I've looked through the adobe help/web search and I can't for the life of me figure out how to dock a floating panel in premiere pro 6.0.

    Hey Joe,
    Yes, I actually went through this and kind can't find the answer.  I understand how to do it moving a docked panel where it gives me the drop zones but once it's already a floating panel I can't seem to reactivate drop zones.  When I close the window and reopen it from the "window" tab at the top it becomes floating again.
    I read through that article twice.  I'm not seeing it!

Maybe you are looking for