FLVPlayback error clearing
I am having some difficulty getting some code right and is
causing my flvplayback mc to load undefined into it's content path.
This is my problem, but as a cause of this, I'm noticing that the
whole thing dies when it can't load a movie in, and further
attempts to load a different movie are met with failure, even when
the subsequent movie path's are correct. So, is there a way to
reset an FLVPlayback object to recover it from an error? or will I
have to actually remove the movie clip and recreate it (which takes
a long time and a lot of processing power).
Hello Vivek,
Thank you for your information. It's very helpful for me.
On this sap notes, it said 2 program RFVD_CHK_REMOVE_CLEARING or
RFVD_CHK_CHANGE_CLEARING.
You can use program RFVD_CHK_REMOVE_CLEARING for customer, but for vendor you can use RFVD_CHK_CHANGE_CLEARING.
CHANGE CLEARING only break the link between two document and open one side only.
You need to run the program once more for clearing document, so both of them will open again.
If you don run for the second once, the clearing document still closed.
After that you can use t.code FB08 to reverse that document.
Hope this will help the others one.
Similar Messages
-
Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin WilsonHello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson -
Error ERR-1018 Error clearing step cache
The full error message was:
ORA00001: unique constraint (FLOWS_030000.WWV_FLOW_COLLECTIONS_UK) violated ORA-00060: deadlock detected while waiting for resource
Error ERR-1018 Error clearing step cache
We can't reproduce it (so it would appear to be intermittent and very rare), but it may be significant that it occurred in an unauthenticated application.
Does anyone have any idea about what circumstances would cause this error to occur?
Many thanks for your help.
John.Can't believe that the thread immediately preceding this one when I posted it (the relevant thread is called 'intermittent collection violations') more-or-less answers this question... (and that I didn't find it when searching).
Edited by: John Vaughan on Nov 12, 2008 1:14 PM -
Error during install "$error.Clear();
Hi everyone,
Next error popped up while installing exchange 2013:
The following error was generated when "$error.Clear();
if (($RoleIsDatacenter -ne $true) -and ($RoleIsDatacenterDedicated -ne $true))
if (test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}";
$dispname = "Microsoft Exchange";
$mbxs = @( get-mailbox -arbitration -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1 );
if ( $mbxs.length -eq 0)
$dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
$arbUsers = @(get-user -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
$sysMbx = enable-mailbox -Arbitration -identity $arbUsers[0] -DisplayName $dispname -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispname )
set-mailbox -Arbitration -identity $mbxs[0] -DisplayName $dispname -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMDataStorage:$true -Force;
# No RetentionPolicy assigned to E-Discovery arbitration mailbox currently, we need to set it here.
# This can be remove after BUG(O15#2555914) is fixed.
if ($sysMbx.RetentionPolicy -eq $null )
$arbitrationRetentionPolicy = @(Get-RetentionPolicy -DomainController $RoleDomainController | where {$_.Name -eq 'ArbitrationMailbox'});
set-mailbox -Arbitration -identity $sysMbx -RetentionPolicy $arbitrationRetentionPolicy[0].Identity -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find E-discovery arbitration mailbox with name=$name.");
else
write-exchangesetuplog -info "Skipping creating Discovery Arbitration Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox.".
I can't find where it goes wrong. Can anyone help me?
ThanksHi,
Please check the homeMDB attribute of the system mailbox "SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9}", make sure the homeMDB attribute points to the correct mailbox database.
If the value of homeMDB attribute is ok, please recreate this system mailbox to check result.
http://technet.microsoft.com/en-gb/library/gg588318(v=exchg.150).aspx
Best regards,
Belinda Ma
TechNet Community Support -
I am getting the following error when I'm setting up the mailbox server as I'm currently doing a test virtual machine throughHyper-V, it seems to happen during the transport service phase of the installation which is 7/12
Do i know need a D:\ drive for the mailbox server to work? as in my test i only have a c:\ drive but no d:\ drive
Error:
The following error was generated when "$error.Clear();
if ($RoleProductPlatform -eq "amd64")
$useAttachMode = $false;
$fastInstallConfigPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\Installer";
$command = Join-Path -Path $fastInstallConfigPath -ChildPath "InstallConfig.ps1";
$fastDefaultDataFolderPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\HostController\Data";
$dataFolderPath = $fastDefaultDataFolderPath;
if ([System.IO.Directory]::Exists($fastDefaultDataFolderPath))
$useAttachMode = $true;
else
if ($RoleIsDatacenter -eq $true)
$preferredDataFolderPathRoot = "D:\";
if ([System.IO.Directory]::Exists($preferredDataFolderPathRoot))
$dataFolderPath = Join-Path -Path $preferredDataFolderPathRoot -ChildPath "ExchangeSearchData";
if ([System.IO.Directory]::Exists($dataFolderPath))
$useAttachMode = $true;
if ($useAttachMode -eq $true)
&$command -action a -dataFolder $dataFolderPath -silent;
else
try
&$command -action i -dataFolder $dataFolderPath -silent;
catch
$errorMsg = "Failure running SearchFoundation installconfig.ps1 - " + $_.Exception.Message;
Write-ExchangeSetupLog -Error $errorMsg;
&$command -action u -silent;
try
if ([System.IO.Directory]::Exists($dataFolderPath))
[System.IO.Directory]::Delete($dataFolderPath, $true);
catch
$deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath
+ " - " + $_.Exception.Message;
Write-ExchangeSetupLog -Error $deleteErrorMsg;
" was run: "Couldnít attach the data folder 'C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\Data'. Path doesnít contain old nodes belonging to the system 'Fsis'.".
Warning:
An unexpected error has occurred and a Watson dump is being generated: The following error was generated when "$error.Clear();
if ($RoleProductPlatform -eq "amd64")
$useAttachMode = $false;
$fastInstallConfigPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\Installer";
$command = Join-Path -Path $fastInstallConfigPath -ChildPath "InstallConfig.ps1";
$fastDefaultDataFolderPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\HostController\Data";
$dataFolderPath = $fastDefaultDataFolderPath;
if ([System.IO.Directory]::Exists($fastDefaultDataFolderPath))
$useAttachMode = $true;
else
if ($RoleIsDatacenter -eq $true)
$preferredDataFolderPathRoot = "D:\";
if ([System.IO.Directory]::Exists($preferredDataFolderPathRoot))
$dataFolderPath = Join-Path -Path $preferredDataFolderPathRoot -ChildPath "ExchangeSearchData";
if ([System.IO.Directory]::Exists($dataFolderPath))
$useAttachMode = $true;
if ($useAttachMode -eq $true)
&$command -action a -dataFolder $dataFolderPath -silent;
else
try
&$command -action i -dataFolder $dataFolderPath -silent;
catch
$errorMsg = "Failure running SearchFoundation installconfig.ps1 - " + $_.Exception.Message;
Write-ExchangeSetupLog -Error $errorMsg;
&$command -action u -silent;
try
if ([System.IO.Directory]::Exists($dataFolderPath))
[System.IO.Directory]::Delete($dataFolderPath, $true);
catch
$deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath
+ " - " + $_.Exception.Message;
Write-ExchangeSetupLog -Error $deleteErrorMsg;
" was run: "Couldnít attach the data folder 'C:\Program Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\Data'. Path doesnít contain old nodes belonging to the system 'Fsis'.".
Hi
Most likely for these kind of issues its better you can delete the hyper-v machine and create a new os , ensure all the prerequisite are met and install the Exchange since this is a new installation.
But as a try you can try giving full access to the admin account to the data folder 'C:\Program
Files\Microsoft\Exchange Server\V15\Bin\Search\Ceres\HostController\Data'. which is giving the error and rerun the setup
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
FM error clearing error (FMUP137)
Good afternoon,
We have in this company a Budget structure with fund, fund centre, functional area and commitment item.
We carry out a downpayment agaistn a PO. Then, through transaction code MIRO, we post following document:
1.- 31K Vendor
2.- 86S Goods receipt
3.- 39K A Vendor (Suppliers Down payment)
4.- 27K Vendor
Position "1" does not impact budget (GL with a commitment item with Financial transaction 60). Positions "2" and "3" are netted in budget terms.
The problem arise with position "4" as the system derives the commitment item from the functional area (FMDERIVE. Derivation rules used for other cases) instead of taking the one defined in the GL account (GL with a commitment item with financial Financial transaction 60). Any idea?
Because of that, during the clearing of the advance payment and the invoice we get an error related to the online payment (Unpermitted business transaction - Message no. FMUP137).
Please let me know.
Thanks
DanielHi Daniel.
DO you're using the online payment update actively?
Posting an invoice or credit memo and clear another invoice or credit memo directly in the process. This posting is forbidden when the online payment update is active.
Please check these OSS SAP below.
1566625 - FMPU_R: Check on forbidden postings
1085921 - Document split
Kind Regards.
Jandoval Nascimento -
ERROR: Clearing cannot be reversed (contract number)
Dear Experts,
When i go to t.code FBRA and want to reset the doc clearing. The error appear with Message no. F5538 Clearing cannot be reversed (contract number).
This is the Diagnosis
It is not possible to terminate clearing because a contract number was posted in the line item 002 of the document 1500000088 3500 2011.
Please anyone, who can answer this case.Hello Vivek,
Thank you for your information. It's very helpful for me.
On this sap notes, it said 2 program RFVD_CHK_REMOVE_CLEARING or
RFVD_CHK_CHANGE_CLEARING.
You can use program RFVD_CHK_REMOVE_CLEARING for customer, but for vendor you can use RFVD_CHK_CHANGE_CLEARING.
CHANGE CLEARING only break the link between two document and open one side only.
You need to run the program once more for clearing document, so both of them will open again.
If you don run for the second once, the clearing document still closed.
After that you can use t.code FB08 to reverse that document.
Hope this will help the others one. -
Dear All ,
I am trying to clear with using F-32 for a customer (open items only with special GL indicator A ) I got the below error . Do you have any idea wht i got this error ?
Multiple special G/L indicators not permitted
Message no. ICC_TR194
Diagnosis
Not all the checks or bills of exchange that you have entered have the same special G/L indicator, as required.
Procedure
Create a separate document for each special G/L indicator
Thanks
DashHi Dash,
Review the note 381781. I think it can help you.
Best Regards,
Bruno Wiener -
Provisioning Dispatcher error: Clear ALL old Semas
So I've gotten this periodically in the past, but recently we've been getting randomly spammed by this error message in our System Log:
"Clear ALL old Semas: Exception:java.lang.NullPointerException"
It has no additional details, Job ID of 0, and seems to be coming from our second provisioning dispatcher, but I'm not 100% positive they haven't both done it at some point. Is this related to having two Provisioning dispatchers running on the same machine? That's my only guess, as I've heard people mention that being a problem in the past, but never exactly WHY it is a problem.
Alternatively, is there a way I can find out what code it is actually running so I can fix the exception handling or maybe add a check or two to avoid trying to use a null object (in the end, I'd probably consider this a code fault regardless of what's causing it).
Thanks!I thought the problem might be related to incorrect configuration of our dispatchers (we had two provisioning dispatchers and two regular dispatchers running on the same machine apparently), so I fixed the configuration of those and thought the problem went away.
This morning, it has come back. It started with exactly one of this message:
Clear ALL old Semas: Exception:com.microsoft.sqlserver.jdbc.SQLServerException: The native type 4 is unknown.
Then over the next two hours we got this message in our log over 1600 times:
Clear ALL old Semas: Exception:java.lang.ArrayIndexOutOfBoundsException: 3
Does anyone else have any thoughts!? This problem is plaguing us right now... I'm not actually sure what it is doing that is bad, but it's filling up our log with junk and we're trying to measure how well our system is working using error counts, which this shoots through the roof. -
Using current version of Firefox.
The problem seems to be confined to the e-mail I was trying to reply to. Sent a test msg. to another Gmail address & it didn't have a problem.By the way, the fact that the error does not occur in Safe Mode is interesting, as in normal mode Firefox may be checking the registry key related to Firefox extensions at startup. And that key would be a logical target for deletion of any references to malware. However, I've never seen a specific list of registry read/writes for Firefox startup, so that's just a guess.
-
I'm looking for a way to avoid getting the "1000: Unable to
make connection to server or to find FLV on server" error. I have a
fairly sophisticated FLV Player that loads and unloads videos quite
a bit. I want to write some code that will make it load a default
video if the desired video cannot be loaded. As it is right now, I
get the error before any states are received. Will the NCManager
return this error if the path is incorrect even before putting out
any state events? Any help would be greatly appreciated!Couple of observations:
First.. Links 1 and 3 work just fine, both CDN and local, 2 and 4 in both sections return "File not found".... so bad link or missing file.
Second.. You're using 11.3.3.... bummer!! oh well, latest isn't always the greatest.
Third... and most likely the main issue is the unorthadox <script> embed method. To test this theory, I'd suggest you test using at least a couple of other embed methods.
To start, get rid of both:
<script type="text/javascript" src="jQuery.js"></script>
<script type="text/javascript" src="swfObject.js"></script>
and test using the old <object> and <embed> method. While the code is not valid HTML, use it for testing purposes. ... see this sample and edit for your content of course..
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,19,0" width="995" height="165">
<param name="movie" value="images/whw_banner_no_ds2.swf" />
<param name="quality" value="high" />
<param name="wmode" value="transparent"/>
<embed src="images/whw_banner_no_ds2.swf" quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="995" height="165" wmode="transparent"></embed>
</object>
Next, test using the single <object> method:
<object data="path_to_file/file.swf" type="application/x-shockwave-flash" width="insert_width_of_movie" height="insert_height_of_movie">
<param name="movie" value="path_to_file/file.swf">
<param name="SomeOtherParam" value="ParamValue">
</object>
If either of these method provide consistant correct display, then I'd say its the <script> that is causing the issues.
Best wishes,
Adninjastrator -
Deploy FLV with FLVPlayback Errors #2024 #2124
I've deployed an FLV video, using Flash CS3 default settings
and a supplied skin, to an IBM WebSphere (JSP) web site. The FLV
plays but the skin's swf file does not. The following error is
displayed:
Error #2044: Unhandled skinError:. text=[IOErrorEvent
type="ioError" bubbles=false cancelable=false eventPhase=2
text="Error #2124: Loaded file is an unknown type. URL:
SkinUnderPlayStopSeekFullVol.swf"]
It also seems that AC_RunActiveContent.js isn't found either.Thank you for your answer. I am not an experienced Flash
developer, use it occasionally and I’d appreciate some
further help here please. Firstly I have sorted the lost
AC_RunActiveContent.js file issue.
Ignoring the Error #2044 error message for the moment the
main SWF, FLV file and skin SWF are all in the same folder. The
main SWF plays the linked FLV file but not the skin SWF, unless I
paste the main SWF’s URL straight into the browser address
bar. In which case it all plays perfectly.
This suggests the problem is with the
<object>/<embed> and/or the page script for the
AC_RunActiveContent (as opposed to the
AC_RunActiveContent.js). Is this where the base URL property
may help?
Using the base URL property – the SWF files and FLV
file are stored in the folder
http://www.myweb.co.uk/wcsstore/Publishing/images/Videos/.
On page delivery this is resolved from
<%=jspStoreImgDir%>images/Videos/. e.g. name="movie"
value="<%=jspStoreImgDir%>images/Videos/main.swf". I guess
the base URL is
http://www.myweb.co.uk/wcsstore/Publishing/ but how is the
base URL property structured in the <object>/<embed>
scripts and, if needed, in the local AC_RunActiveContent
javascript? And should it be used instead of
<%=jspStoreImgDir%>?
I hope you can help.
TW -
Dreamweaver sometimes says something to the tune of "index
not found in site" and then clears my remote info. Wtf?They should look in their own tech articles. I had the same problem and this solved it:
http://docs.info.apple.com/article.html?artnum=93061
With one caveat. The article talks about creating a shared folder in the Users folder, but I could not create it there even with Admin permissions. However, I could create it somewhere else and paste it into the users folder, the change the permissions.
Makes no sense, but seems to solve the problem! -
8/29/2014 7:15am
It seems to me that if Microsoft's platform can not fix it with the troubleshooter that the troubleshooter sucks. It does not know when errors are thrown so your developer sucks on creating software for errors that are popping up in your software?
if a error is thrown in Windows 8 it should catch it upon a thrown error in programming? This hsould be a level 1 ticket. Since when I call you support for error in your product no one wants to address problems in your software and get mea tech to resolve
it?
The question now is how do I fix this and why is it causing me an internal error 500 for my web server install?
I may have other issues but I need access to my web server through my browser I used fsocketopen to troubleshoot it?
It gets back a internal 500 on Gecko process in firefox and on IE it just won't serve out the document in my web server abyss or apache? So the question is what service is broken so I can't serve my [web server] pages out? Let me go through all the event
logs that I have with errors below?
Under Applications:
1) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 10
2) LMS Service cannot connect to Intel(R) MEI driver. Error level 1
3) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 3
4) SearchIndexer (3476) Windows: The database engine attached a database (1, C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb). (Time=0 seconds)
5) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.125, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000.
Saved Cache: 1 0: Evenet Id level 326.
6) SearchIndexer (3476) Windows: The database engine started a new instance (0). (Time=0 seconds)
7) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000. eveent level 105
8) SearchIndexer (3476) Windows: The database engine (6.03.9600.0000) is starting a new instance (0). Error Level 102
Under Security:
1) We might want to check this out here User Account Management changed?
Under Setup: no errors.
Under System below:
1) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.Event level 1014
2) Intel(R) 82567LM-3 Gigabit Network Connection
Network link is disconnected.
3) The system has returned from a low power state.
Sleep Time: 2014-08-29T05:10:07.602701000Z
Wake Time: 2014-08-29T13:13:47.945773100Z
Wake Source: Device -USB Root Hub : Error level 1
4) The browser has forced an election on network \Device\NetBT_Tcpip_{58565081-3013-43B6-AE07-CC89C71F6036} because a master browser was stopped. Event Id 8033.
5) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Event error 219.
6) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{3c83e4cf-28e9-11e4-827b-b8ac6f8aec21}#0000000000004000. Error Level Id 219.
7) The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again. Error Id 10114.
8) Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. The data field contains the error number. Event Id 15005.
9) The supersafer64 service failed to start due to the following error:
The system cannot find the file specified. Event ID 7000.
10) The SNMP Service encountered an error while accessing the registry key SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration. Error: 1500.
11) The SAS Core Service service failed to start due to the following error:
The system cannot find the file specified. 7000
12 The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/ for site 1. The site has been disabled. The data field contains the error number. 1004
13) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Error level 219
14) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded. Error level 1014.
Now I need help with all these error since Windows 8 with maybe 15 applications is failing after no setup errors? What would cause these we need to find out? Since I can not use your product with so many developer errors? and to put out a products that doesn
work is pointless? So please call me and have some help me through the errors and tell your support to stop ignoring the errors that broke the products?
Sincerely, William Dunlap {removed} N. Academy blvd, 201, Colorado Springs, CO 80910 http:\\interfacesone.fnhost.org
{removed}. I need a tech to help me get my web server up?So now you don't release the security breaches in windows 8. You mean to tell me that you can use Powershell - Using WMI to breach security in VB apps on the web by getting my file structures?
What is this all about?
1 Set VPN NIC Settings
2 Get Network Data from servers
Set VPN NIC Settings
$error.clear | out-null
cls
$ErrorActionPreference = "SilentlyContinue"
if ( $Args.Count -ne 1 ) { "
Not enough arguments
Usage :
script.ps1 server
"; exit }
$server = $Args[0].ToLower()
"We are working with $server"
$netAdapt = get-wmiobject -class Win32_NetworkAdapter -computer $server
if (!($netAdapt)) {
"Failed to connect to the target server!"
exit(5)
foreach ($card in $netAdapt) {
IF (!([string]::IsNullOrEmpty($card.NetConnectionID))) {
if ($card.NetConnectionID.CompareTo("VPN Virtual NIC") -eq 0) {
$myID = $card.DeviceID
$NAC = [wmi]"\\$server\root\cimv2:Win32_NetworkAdapterConfiguration.index='$myid'"
$guid=$NAC.settingID
"Setting DNS Toggles"
$dnsToggle = $NAC.SetDynamicDNSRegistration(0,0)
if ($dnsToggle) {
"Success"
} else {
"Failure"
$strShowNicKeyName = "SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\$guid\connection"
#$strShowNicKeyName
$reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey('LocalMachine', $server)
$regKey= $reg.OpenSubKey("$strShowNicKeyName",$true)
$showIcon = $regKey.GetValue("ShowIcon")
if (!($showIcon -eq 1)) {
"The icon is hidden.. Setting it now"
$setIcon = $regKey.SetValue('ShowIcon',1,'DWORD')
} else {
"The icon is visible already."
"Script Ends"
Get Network Data from servers
$myfile = get-content servers.txt
echo "Server IPs Subnet GW" | out-file "Results.txt" -Append
foreach ($server in $myfile) {
Write-Host "Looking at $server"
$colitems = Get-WmiObject win32_NetworkAdapterConfiguration -computer "$server" -Filter 'IPEnabled = "True"' | select ipaddress,ipsubnet,index,defaultipgateway
foreach($objItem in $colItems) {
Write-Host ""
$myip = $objItem.IPAddress -join " "
$mySubnet = $objItem.IPSubnet
$myGW = $objItem.DefaultIPGateway
$temp = $objItem.index
$myid = Get-WmiObject win32_NetworkAdapter -computer "$server" -Filter "index = $temp" | select netconnectionid
$myid = $myid -replace "@{netconnectionid=",""
$myid = $myid -Replace "}",""
echo "$server $myip $mySubnet $myGW $myid"
echo "$server $myip $mySubnet $myGW $myid" | out-file "Results.txt" -Append
Is this possible on any machine with power shell and if so how is access done?
William Dunlap -
Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj
Maybe you are looking for
-
System Hangs When Playing Games
Hello, I just built a K7T Turbo2 based system a week ago with Windows XP Prof. installed. I have no problem running your ordinary programs, like office, music, internet for any period of time. However, when I play games, my computer will randomly cra
-
I can't see the photos clogging up our ipad when i hook the ipad up to the ciomputer. I can't dump them to a folder on ther computer. What I am going to end up doing is emailing them all to download and save from email..this really *****. It tells me
-
An internet phone application for a Snow Leopard Mac Mini
The Mac Mini which I purchased , used , because it satisfied the Phone Valet software requirements , plus maintaining usability coordinating as much of the former G5's conformity as one might hope . The folks who provided the Phone Valet device stopp
-
Do I have esata on my MBP???
Hey guys, I am trying to get a new external hard drive and know that I can go with Firewire 400 or 800 on my MBP but I was wondering if someone could tell me if I have an esata port... I am not sure what they look like. I have the MacBook Pro (not th
-
BSPs configuration with multiple apps servers
Hi Masters, This is regrarding configure ICM and BSPs on our production box with multiple application servers. We have our production box in a cluster environment. The central instance is dbciSAP and apps servers are sapaps2 thru sapaps6. The databas