FM/BAPI to Update Valid To Date in Tcode VK12

Hi,
In my program, I'am using FM SD_CONDITION_SAVE_EXIT to update the valid to field in VK12; The problem is it does not seem to work. If somehow you have any alternative solution, I would greatly appreciate it.
Thanks in advance.

Hello Experts,
Thanks a ton for your help.
I am able to export the list of projects from my Z-table to the Select-option of Tcode KKAJ but facing below error while executing, Any idea how solve the error??
Please find below error description......
Select "from database" or "from archive" indicator
Message no. OK024
Diagnosis
You have not set an indicator on the selection screen for the physical location of the data.
System Response
No data will be selected from the logical database.
Procedure
Set one of the following indicators:
From the DB
From the archive
If you want to select data from the archive, you must also enter one or more archives from which the system should retrieve the data.

Similar Messages

BAPI to Update Material classification data

Hi All,
Is there a BAPI that can be used to update material classification data?
Regards,
Hari.

Hi Hari,
Please try this FM UPDATE_MATERIAL_CLASSIFICATION.
Also check program standard SAP program RCCLBI03.
Regards,
Ferry Lianto

Update valid-to date in BOM with ECN

Hi,
I'm trying to update the valid-to date in a BOM using an ECN number (e.g. i don't want it to be 12/31/999). I was wondering what the correct procedure was?
1) what type of ECN to use? (Change Master or ECR; or do both work)
2) if the BOM was already created without a change number, can you update the valid-to date later with an ECN?
3) i checked the forums on this site and it says to use without release key (how does this work)?
4) it seems when i delete a BOM item with an ECN it is gone forever..I just want those items to expire and a new one to be active. how do you do this?
5) can i do all of the above in CS02?
6) Also, how can i tell if ECN is active or not?
Any logical steps on how to update the valid-to date in the BOM would be greatly appreciated. The current forum content doesn't seem to provide the correct steps.
Thank you very much for your help.

Dear Priya Rajaram,
1.We can Use Change number with release key or without release key for
Changing the material BOM.
2.Use Change number with Release key for better control over the BOM to change
the valid to date for the entire BOM or for few BOM items.
3.Once when you use the change number and do the chnges for the material
BOM,it becomes valid as per the valid from date of the Change number.
4.For Eg I have created a Change number with Valid from date as 20.09.2007.
Using this Change number I'm changing the BOM of A,whose components are
say B - 1,
C - 1,
D - 1,
Now using the Change number I'm deleting the item D and saving,so the previous
BOM will be valid till 20.09.2007,and the new BOM be valid from 20.09.2007 i.e
with items B & C alone.
5.T codes For Change numbers are CC01,CC02,CC03.
<u><b>Reward points if useful.</b></u>
If any more query revert to Forums.
Regards
Mangal

BAPI for updating infotype 0019 - Date Monitoring

Hi,
Does anyone know if there a BAPI for creating/updating infotype 0019 - Monitoring of Dates?
Many thanks,
Paul

Hi Paul,
1. HR_INFOTYPE_OPERATION
This is the FM (for all infotypes, even 0019)
2. If u want something like BAPI (RFC Enabled),
what u can do is that
create a new Z Fm,
and call the FM
HR_INFOTYPE_OPERATION
in this.
regards,
amit m.

Need a bapi to update person data in IR02 tcode.

Hi experrts,
I need to update person data in IR02 tcode through plant and workcenter. But I am looking for BAPI to update this person data.
Please help me on this as I caught up badly.
Thanks in Advance.
J.P

I have closed this myself by creating a custom program.

CIF of SA is not consistent for Validity End Date

Hello gurus,
Our company is quite new in using SNC, and we bumped into this problem (see description below), and hopefully this forum can help us.
<Description>:
When the Scheduling Agreement is CIFed from R/3 (ECC) to SNC, the Validity End Date does not get updated each time.
It gets updated sometimes, but not always. It is inconsistent behaviour.
<Example>:
Scheduling Agreement A
Validity End Date: 31.12.2012 Changed to 30.11.2012 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
Correctly updated the Validity End Date in SNC.
For the same Scheduling Agreement A updated Validity End Date to 31.01.2013 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
The Validity End Date was not updated in SNC & remained as 30.11.2012.
For the same Scheduling Agreement A updated Validity End Date to 15.10.2012 in R/3.
Performed CIF using Transaction Codes CFM1 and CFM2.
The Validity End Date was not updated in SNC & remained as 30.11.2012.
Thanks guys
Tuffy

Hi Tuffy,
1 - I am just wondering if after the Delete the existing External Procurement Relationship in SNC, and CFM1 and CFM2 the SA (i.e. changed my validity end date value) to the SNC, will the problem of the SNC side not able receive the changed SA??
When there is a change in the SA, integration model would create the same in SNC if it does not exist. But the transfer from ERP does not happen just like that. First, make sure that the message type (CIFSRC) has been checked in BD50 and then schedule a job to periodically transfer the SAs.
2 - What does the tcode the person in the SNC side have to double check to ensure the SA is transmitted there??
The t-code is /SAPAPO/MTI2 - External Procurement Relationship.
3 - Someone in our company advise BASIS team to check the transactions BD50 and BD52. What exactly does it mean and does it help?
This is correct. I mean guys who are responsible for Integration model need to set-up BD50, BD52 so that changes to SAs are transferred periodically.
Regards,
Sandeep

Table containing 'Valid From' and 'Valid To' dates -- tcode SU01

Hi All,
I want to know the Table containing 'Valid From' and 'Valid To' dates -- In tcode SU01 ---Tab Logon Data there are 'Valid From' and 'Valid To' dates. I want to know the table(s) where this info is stored.
thanks
Naved

Looks like you have two userids. Login to SDN using your userid that created the post and assign the points. If you don't see the radio button then change your original post to a question.
Message was edited by: Prakash Singh

Any function module to update Manufacturer serial number in tcode IE02

Hi Friends,
I need function module or bapi to update
Manufacturer serial number in tcode IE02 .
Please ........
Thank you.
Karthik.

Hi,
You may use the exit
IEQM0007
or
BADI:
EQUI_SERLV_CHECK
hope this helps.
Regards,
Renjith Michael.

Updating Cube in the End Routine based on the incoming Valid From Date

Hello Experts
Here is my scenario.
We are using BW 7.x. There is DSO and from DSO it goes to the Cube, the promotions information. These data targets will have Material (Article), Plant (Site), Promotions Number, Valid from and Valid to dates. The Valid To date will come in as 12/31/9999 all the time.
If I receive a new record from ECC with same Material, Plat and Promotion combination again, I need to get the Valid From Date from the new record and Update the existing record' Valid To date in DSO/Cube as Valid From of the new record - 1.
So Valid To date of the existing record = New Record's Valid From date minus - 1.
I would like to do the update in "End Routine" of the Cube.
Would you please suggest if this can be done and if so would you please provide the sample code.
THANK YOU in Advance.
Nag.

yes, you can do this...
just use a RESULT_PACKAGE in end routine.
and using RESULT_PACKAGE fatch the existing records from DSO and append that into RESULT_PACKAGE after your desired changes,
just try to create a code using this l;ogic. if you can't then i will provide you a code.
Regards,
Ashish

Need BAPI to update posting date for parked documents in transaction FBV2?

Hi All,
I am retrieving records from table VBKPF and I have to update the posting date for parked documents in transaction FBV2.
I am doing it with BDC , working fine in foreground, but it is not workung fine in back ground.I want to do this with bapi.
Can any one suggest me corrct BAPI?
TYPES : BEGIN OF It_vbkpf,
         bukrs LIKE vbkpf-bukrs,            "Company Code
         belnr LIKE vbkpf-belnr,            "document number
         gjahr LIKE vbkpf-gjahr ,           "Fiscal year
         budat LIKE vbkpf-budat,            "Posting date
         bldat LIKE vbkpf-bldat,            "Document date
         blart LIKE vbkpf-blart,            "Document type
         xblnr LIKE vbkpf-xblnr,            "Reference
         tcode LIKE vbkpf-tcode,            "Transaction Code
         bktxt LIKE vbkpf-bktxt,            "Document header text
         usnam LIKE vbkpf-usnam,            "User Name
         xwffr LIKE vbkpf-xwffr,            "Release necessary
         xprfg LIKE vbkpf-xprfg,            "Document complete
         xfrge LIKE vbkpf-xfrge,            "Release takes place
        END OF it_vbkpf.
Thanks,
Suresh.

Hi ,
Thanks for your response.
PRELIMINARY_POSTING_UPDATE seems working good,But my requirement here , to update the posting date with last working day . how can i do this?
thanks,
Suresh.

BAPI to update data in KNA1 and ADR* tables

Hi,
I have to change customer data via BAPI.
I'm searching for a BAPI that updates KNA1 and ADR* tables.
(so that data will be coherent).
I found BAPI_CUSTOMER_CHANGEFROMDATA1 but it seems to only update KNA1
and BAPI_ADDRESSORG_CHANGE that only updates ADR* tables.
Can you help me ?
Thanks,
Sandrine.

I came accross such a requirement but couldn't find a single function module.
I think try using both the FM's else BDC is the only option left.
you can use the FM "DEBITOR_BDCDATA" to get the BDC data for vendor and then edit it to add the address fields required.

BAPI/function module to create/update vendor master data

Hi
We are on ECC 50 and have a need to update vendor master data through a programatic interface ( non-dialog ) with ABAP. What is a good function module that can be used to create/update vendor master data - I looked at BAPI_VENDOR_CREATE and did not find any input interfaces that can be passed to this BAPI.
Previous experiences with the right BAPI for this purpose that can be shared is appreciated. <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 5:58 PM

Hi Kiran,
If you want to load the vendor data into sap its better to go with LSMW batch input program.
object 0040
method 0001
program name RFBIKR00
Program type B
this would be a good choice. Recently i did the same.

Bapi to update delivery date in confirmation tab in purchase order me22n tc

Hi All,
I am writing a BDC to update the data in confirmation tab for puchase orders for enjoy transaction.
Please let me know how to updated delivery date in confirmation tab in purchase order(ME22N) using a bapi.
I tried using BAPI_PO_CHANGE but found no parameter related to confirmations tab. this BAPI has every thing to update like header data, item data, scheduling data..... except confirmation.
So please let me know how to update the data in confirmation.
We need to use only enjoy transaction ME22N not ME22 in BDC thats why we are looking for a BAPI.
Regards,
Venkat

Hi
Check the table parameter POCONFIRMATION in BAPI_PO_CHANGE
U can see the field DELIV_DATE in the structure BAPIEKES.
DELIVERY_DATE in the structure BAPIMEPOSCHEDULE as well.
Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Feb 5, 2009 7:57 AM

BAPI to update EIKP (Foreign Trade: Export/Import Header Data)

Hello,
Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
Thank you.
Best Regards,
Sreenivas.

Hi Sreenivas
Try the FM EXPIMP_POSTING
Pushpraj

BAPI to update EIKP (Foreign Trade: Export/Import Header Data) data

Hello,
Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
Thank you.
Best Regards,
Sreenivasa Chary Bathoju.

Dear Sreeninvas,
You can you BAPI_PO_CHANGE to change EIKP data. and all purchase order related data.
Thank you.
Best Regards,
Sasidhar Reddy Matli.

FM/BAPI to Update Valid To Date in Tcode VK12

Similar Messages

Maybe you are looking for