FM for Date

Dear All,
Is there any function Module which take current date as input and return previous month start and end date.
e.g; Input = 20100811
output = 20100701 and 20100731
Regards,
Sohail
Moderator message: date conversion questions = FAQ, please search before posting.
locked by: Thomas Zloch on Aug 11, 2010 11:08 AM

Hello Muhammed,
You can use fm WSAF_GET_LAST_DAY_OF_MONTH. As parameter you have to process the current date and subtract 1 from current month. For example today is 11.08.2010, you can change the month portion to 07 and give 11.07.2010 to the fm. It will return the relevant last day of the month.
Regards,
Ali

Similar Messages

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

HT201250 Can I partition my external hard drive and use one partion for time machine and the other one for data that i may want to use in different computers?

I have this doubt. I've just bought an external drive, especifically a Seagate GoFlex Desk 3 tb.
I want to know if it is recomendable to make a partion exclusively for time machine and let another one so I can put there music, photos, videos, etc that I should need to use or copy to another computer.
May half and half, 1.5 tb for time machine and 1.5 tb for data.
I have an internal hard drive of 500 GB (499.25 GB) in my macbook pro.
Any recommendation?

As I said, yes. Be sure your Time Machine partition has at least 1 TB for backups.
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

Why am I being charged for data when connected to wifi AND not using my phone?!

WHY am I being charged for data that I'm not using? At times when I'm asleep AND my phone is connected to wifi?! This happens at really specific, alternating times like 9:54 pm every day, or 12:01 am, 6:01 am and then 12:01pm and 6:01pm. When I called I was told "maybe your wifi at home is disconnecting" or "maybe your phone is connecting to atnt or sprint". It's not possible that my phone is disconnecting from wifi every six hours on the dot and, at that exact time, I'm always using data. I find it hard to believe that I live in a HUGE city and my phone magically connects to other networks and I NEVER notice this. Verizon is full of LIARS (and maybe’s) and I'm not convinced that these data charges are a coincidence. I was told to turn off my cellular data to see if the problem resolves itself. Why should I alter my daily life when Verizon is clearly the one with the issue? I hope there's a class action lawsuit because Verizon is trying to get over on everyone! I need answers!

Hello NotHappy101,
I think it's quite odd that your data usage is at very specific times. We can certainly take a closer look. Please reply to my Direct Message, so we can get some additional details.
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Issue with table ROOSPRMSF entries for data source 0FI_AP_4

Hi Experts,
I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries. Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL.
From OSS note 852443 point 3
"3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE copy entries into ROOSPRMSF table in R/3 ?
Could any one please clarify this ?
Thanks
Regards,
Jeswanth

Hi Amarnath,
Did you unhide the new field in RSA6 and regenerated the DataSource?
Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
Grtx,
Marco

When I tried to Mail Merge for Data is is not exporting any data.

HI,
EBS-12.1.3
DB-11gR1
OS - RHEL 5.6
[With my Login User and SysAdmin Login User] When I enter into to the "People -> Enter and Maintain" Form and then I press the "Export Button", there is error Alert
Function is not available to this responsibility. Change Responsibilities or Connect to the System Administrator
I Added the Function "HR ADI Seeded Integrator Form Functions" into the "AE HRMS Manager" Responsiblity. It is also working and Export Data icon is enable.
Problem:
But Problem is when I tried to Mail Merge for Data is is not exporting any data.
====================================================================
Steps
1.Move to the "People -> Recruirment" and then "Request Recruitment Letter" .
2. Enter the New Request. as
Letter Name "App. Letter Contract Site",
Automatic or Manual = Manual.
Select the Name from the LOVs for the Request for Detail Block.
3. Press the "Export Data" icon.
4. Integrator Page Appear with my Custom Integrator Name as "Appointment Letter - Contact Site".
5. Select the "Word 2003" from the View List. and Reporting is Checked.
6. Review the Folowing Enteries as:
Integrator Appointment Letter - Contact Site
Viewer Word 2003
Reporting Yes
Layout App. Letter Contract Site
Content XXHR_MBE_APP_LET_CONT_SITE_V
Session Date 2011/08/02
Mapping XXHR_MBE_APP_LET_CONT_SITE_V Mapping
7. Press "Create Document" Button.
8. It will open the Excel 2003 and then Word 2003. But no data down download from the Form.
9. It open the Mail Merge Letter but no Data is Display.
===========================================================
Note:
a. I am following the Steps from the Link:"http://apps2fusion.com/at/38-ss/351-generate-recruitment-letters-web-adi".
b. From the "Desktop Integrator Manager", "Oracle Web ADI", "HRMS Web ADI", it is working fine and Dowload the Data.
===========================================================
Thanks
Vishwa

Please try the solution in ("Function not available to this responsibility" Error While Cliclking On Forms Personalisation [ID 1263970.1]) and see if it helps.
Thanks,
Hussein

Need to build communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer

Hi - I would like to build the logic in which it should accomodate the communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer.
I want to do data transfer b/w host and RT through RS232 VISA portal whenever TCP/IP ethernet cable has been unplugged from the controller continuosly , it should keep on checking for TCP/IP link re-establishing also , when ever the tcp/ip link established again that time the communication should be using in that link only. This is accomplished by deploying the RT vi as execuatbale file. I made some logic regards to the above said logic , bur it was not working as much I expected.
I request you to go through the attached two VI's and let me know , what I did wrong in that,
Please do the needful.
Attachments:
TCP_Serial_Host.vi ‏33 KB
TCP_Serial_RT.vi ‏41 KB

even i am new to this topic and i am trying to get familiar with these protocols
refer to tcp server/client examples in labview examples

Mapping conversion help needed for date

Hi Experts,
I need help in message mapping convesion for date field
The source date field can have value '2010-06-04T02:09:59.610-07:00' or 2010-06-04T02:09:60.610-07:00
I have to change it to '2010-06-04T02:09:59.000-07:00'. ie, if the seconds are 59.XXX, or 60.XXX, then change to 59.000.
Please let me know the best way to do this
Thanks
Mike

Again, to make it more clear
The source date field can have any date value such as
2010-06-04T02:09:59.610-07:00 -
This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.610-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.000-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:59.000-07:00 - This need not be changed
2010-06-04T02:09:58.610-07:00 -- This need not be changed
2010-06-04T02:09:57.610-07:00 etc etc - These need not be changed.
The only change using date function is for the first two dates, in which 59.XXX and 60.XXX need to be replaced with 59.000
Using the above date function, all the seconds 59.XXX, 58.XXX, 60.XXX, etc etc,,, are converted to 59.000, 58.000 and 60.000
I dont need this as per the requirement. So looks like the UDF needs to be altered a little to accomodate my requirement.
Please help me.
Thanks
Mike

Function Modules for Data and Time

Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in dd/mm/yyyy or dd.mm.yyyy and time in HH:MM:SS formats.
Thanks in advance

Hi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
If its usefull reward points

Search help for date field in Editable ALV

Hello Friends,
I am using editable alv using 'reuse_* '.
I have used date as input field. While creating fieldcatlog also i have declared dat as a mkpf-budat.
But i am not getting serach help for date in output.
Is it possible with reuse or i have to go by object oriented ?

Hi,
Just pass the Edit option of the fieldcatalog for those specific fields...
fcat-edit = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-cprog
 i_callback_pf_status_set = 'PF_STATUS_SET'
 i_callback_user_command = 'USER_COMMAND' "<---- pass this
 i_callback_top_of_page = 'TOP'
 is_layout = it_layout
 it_fieldcat = it_fcat
 i_default = 'X'
 i_save = 'A'
 it_events = it_event
 TABLES
 t_outtab = it_final
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CASE r_ucomm.
 WHEN '&DATA_SAVE'. "<-------check this
 PERFORM save_data.
ENDCASE.
ENDFORM. "USER_COMMAND

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Job getting cancelled for 'Chain not processed for date-2007031920070318' ?

Hi All,
We have 2 process chains running only on weekdays - one for sales and the other for billing. A cancelled job is created for one of the process chains with the job log message as 'Chain not processed for date-2007031920070318' for the not run days whereas the other does not have any issues though the same monitor job program runs for both. The difference is only in the variant but nothing much other than that its maintained for 2 different chains.
   We also debugged the monitor job program. It basically does nothing other than displaying messages depending on the status of the chain log.
Please let me know your suggestions as to why it happens.
Thanks,
krishna

it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ?     lit_ekpo_dummy1[] = it_ekpo[].
024310 ?     DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ?     DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ?     REFRESH lit_ematn_dummy[].
024350 ?     lit_ematn_dummy[] = lit_ematn[].

LIST OF STOCK VALUES BALACE REPORTS FOR DATE WISE

Dear friends,
In MB5L T.Code we can get period wise balance reports,but client's requirement is date wise Balance report,could you help me any kind of standard reports for date wise.
Regards,
Sabhapathy R

Dear Vishal,
Thanks for your reply,mb5b only stock and documents number we can get client want to mb5l with date specific balance reports with GL account's.
Regards,
Sabhapathy R

Ensure field sequence is correct for data for mutiple source structure

Hi,
I'm using LSMW with IDOC message type 'FIDCC2' Basic type 'FIDCCP02'.
I'm getting error that packed fields are not permitted.
I'm getting Ensure field sequence is correct for data for mutiple source structures.
Source Structures
 HEADER_STRUCT G/L Account Document Header
 LINE_STRUCT G/L Account Document Line
Source Fields
 HEADER_STRUCT G/L Account Document Header
 BKTXT C(025) Document Header Text
 BLART C(002) Document Type
 BLDAT DYMD(008) Document Date
 BUDAT DYMD(008) Posting Date
 KURSF C(009) Exchange rate
 WAERS C(005) Currency
 WWERT DYMD(008) Translation Date
 XBLNR C(016) Reference
 LINE_STRUCT G/L Account Document Line
 AUFNR C(012) Order
 HKONT C(010) G/L Account
 KOSTL C(010) Cost Center
 MEINS C(003) Base Unit of Measure
 MENGE C(013) Quantity
 PRCTR C(010) Profit Center
 SGTXT C(050) Text
 SHKZG C(001) Debit/Credit Ind.
 WRBTR AMT3(013) Amount
I have changed PAC3 field for caracters fields of same length to avoid erreur message of no packed fields allowed.
Structure Relations
 E1FIKPF FI Document Header (BKPF) <<<< HEADER_STRUCT G/L Account Document Header
 Select Target Structure E1FIKPF .
 E1FISEG FI Document Item (BSEG) <<<< LINE_STRUCT G/L Account Document Line
 E1FISE2 FI Document Item, Second Part of E1FISEG (BSEG)
 E1FINBU FI Subsidiary Ledger (FI-AP-AR) (BSEG)
 E1FISEC CPD Customer/Vendor (BSEC)
 E1FISET FI Tax Data (BSET)
 E1FIXWT Extended Withholding Tax (WITH_ITEM)
Files
 Legacy Data On the PC (Frontend)
 File to read GL Account info c:\GL_Account.txt
 Data for Multiple Source Structures (Sequential Files)
 Separator Tabulator
 Field Names at Start of File
 Field Order Matches Source Structure Definition
 With Record End Indicator (Text File)
 Code Page ASCII
 Legacy Data On the R/3 server (application server)
 Imported Data File for Imported Data (Application Server)
 Imported Data c:\SYNERGO_CREATE_LCNA_FI_GLDOC_CREATE.lsmw.read
 Converted Data File for Converted Data (Application Server)
 Converted Data c:\SYNERGO_LCNA_FI_GLDOC_CREATE.lsmw.conv
 Wildcard Value Value for Wildcard '*' in File Name
Source Structures and Files
 HEADER_STRUCT G/L Account Document Header
 File to read GL Account info c:\GL_Account.txt
 LINE_STRUCT G/L Account Document Line
 File to read GL Account info c:\GL_Account.txt
File content:
Document Header Text Document Type Document Date Posting Date Exchange rate Currency Translation Date Reference
G/L Account document SA 20080401 20080409 1.05 CAD 20080409 Reference
Order G/L Account Cost Center Base Unit of Measure Quantity Profit Center Text Debit/Credit Ind. Amount
 44000022 1040 Line item text 1 H 250
 60105M01 13431 TO 10 Line item text 2 S 150
800000 60105M01 Line item text 3 S 100
 60110P01 6617 H 40 Line item text 4 S 600
 44000022 ACIBRAM Line item text 5 H 600
The file structure is as follow
Header titles
Header info
Line titles
Line1 info
Line2 info
Line3 info
Line4 info
Line5 info
Could someone direct me in the wright direction?
Thank you in advance!
Curtis

Hi,
Thank you so much for yout reply.
For example
i have VBAK(Heder structure)
 VBAP( Item Structure)
My file should be like this i think
Identification content Fieldnames
 H VBELN ERDAT ERNAM
 Fieldvalues for header
 H 1000 20080703 swapna
Identification content Fieldnames
 I VBELP AUART
 Fieldvalues for item
 I 001 OR
 002 OR
Is this format is correct.
Let me know whether i am correct or not

FM for Date

Similar Messages

Maybe you are looking for