MB5B Report for Date Wise Stock and Value
Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock
Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick
Similar Messages
-
LIST OF STOCK VALUES BALACE REPORTS FOR DATE WISE
Dear friends,
In MB5L T.Code we can get period wise balance reports,but client's requirement is date wise Balance report,could you help me any kind of standard reports for date wise.
Regards,
Sabhapathy RDear Vishal,
Thanks for your reply,mb5b only stock and documents number we can get client want to mb5l with date specific balance reports with GL account's.
Regards,
Sabhapathy R -
Report for bom wise target and actual cost as well as qty at line item
Dear Experts,
Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
I want to see line item wise breakup/bom wise target and cost cost as well as qty.
Thanks in advance.
regards
RKDear experts,
I am still looking for a revert.
regards
RK -
Report for equipment with characteristics and value
Dear friends,
I need to develop a report which contains fields from the equipment master like superior equipment, functional location, asset etc. as well as charcteristics and values maintained in the equipment. (Multi level equipment display) is not acceptable to client. I understand that table AUSP can be utilised for getting the characteristic value, but I am unable to find any fields from equipment master which I can use to pass on to the AUSP table. Kindly let me know if there is any other table which I can use or any other approach I can take.
Thanks and best regds
ArunThanks Pete for the quick response. I will check with the Abaper if he could utilise the function modules for developing the report.
best regds
Arun -
T Code for Date wise FG and SFG Created
I want to check how many FG and SFG are created in each month? Any one knows the report or table in which I will Get this DATA?
ASK ABAP to copy MM60 to create a Modified report and add the cloulmn created on Table Mara field ERSDA and also ask him to add in the selection parameter the same so when you will run it for month it will give you for that period and by material type too the ouput with created on date in output too.
Regards
qsm sap
Edited by: qsm sap on Jul 10, 2010 3:43 PM -
Report for Storage location wise Stock with value..?
Hi guru's
Can anybody explain me what is T.code i want to use to get a report for STORAGE LOCATION STOCK with VALUE..?
Urgent reply me ..
Thanks
sap-mmSorry Mr chetan,
I want to see only the stock available in my company with Value and storage location wise..
Please try to get report for this
Thanks
sap-mm -
Any function module to get Stock and value of material on a given date?
Hi Friends
Is there any function module available to get Stock/and value of material on a given date?
Thanks
HarishSorry I didn't elaborate the requirement.
I am asked to develop a custom report for inventory management. For range of materials it is required to display stock and value on particular date and GRs GIs for the range.
I need function module to use in Zreport.
Thanks
Harish -
How To Find Opening Stock And Value For a Material
Hi Experts,
How To Find Opening Stock And Value For a Material in Given Dates
Moderator Message: Search.
Edited by: kishan P on Sep 15, 2010 4:05 PMThanks For Answering.....
But I Need Any Function Module To Get Opening Stock And Value For Given Material With in Dates. -
Date Wise stock report (0IC_C03)
How can we see the date wise stock quantity and value in Query using cube 0IC_C03.
Example:Suppose i want to see what was my stock quantity and stock value on 25th Jan08.Hi,
Restrict the Key figure value and quantity with the date.
OR
Go to the key figure in RSA1-> Info objects -> Double click on ur key figure-> Go to the aggregation tab Specify exception aggregation as last value and reference char as 0calday.
This will give u the stock on the last day.
If u want to do it in bex
Create a Calculated Key figure put ur key figure in. And right click select the properties select exception aggregation last value and reference char as 0calday.
Khaja -
Tables req to get date wise stock report
Hi
Pls advise, what are the tables req to get date wise stock report??? i don't want any t codes... i have to do with age analysis ,??
Anyone has answer? pls provide it.
Edited by: UJ on Mar 3, 2010 8:54 AMYou can take below details which help you to get the exact things..
*-- Tables delcaraion
TABLES : mkpf, " Header: Material Document
mseg, " Document Segment: Material
mara, " General Material Data
makt. " Material Descriptions
*-- Types declaration
TYPES: BEGIN OF ty_mkpf,
mblnr TYPE mblnr, " Number of Material Document
mjahr TYPE mjahr, " Material Document Year
blart TYPE blart, " Document type
budat TYPE budat, " posting date
END OF ty_mkpf.
TYPES: BEGIN OF ty_mseg,
mblnr TYPE mseg-mblnr, " Number of Material Document
mjahr TYPE mseg-mjahr, " Material Document Year
zeile TYPE mseg-zeile, " Item in Material Document
matnr TYPE mseg-matnr, " Material Number
bwart TYPE mseg-bwart, " Movement Type (Inventory Management)
dmbtr TYPE mseg-dmbtr, " Amount in Local Currency
menge TYPE mseg-menge, " Quantity
lgort TYPE mseg-lgort, " Storage Location
pbamg TYPE mseg-pbamg, " Quantity
werks TYPE mseg-werks, " Plant
ummat TYPE mseg-ummat, " Receiving/Issuing Material
umwrk TYPE mseg-umwrk, " Receiving/Issuing Plant
umlgo TYPE mseg-umlgo, " Receiving/Issuing Storage Location
END OF ty_mseg.
Further if you want you can play with Movement types. -
Report for date variances between delivery and goods receipt date
dear guru ,
i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
Do you help me ?
ThanksHi,
Use Report ME80FN and here check the delivery schedule option in output screen. -
Dash board report for make to stock scenario?
hi friends,
Here i am having a problem that, I need to do the dash board report to display the sales and production values (quanty s , value) with particular date comparission.
some more detailed.
my client need the report with day wise production and sales values with respective of material number. I can make the report if it is make to order situation. but , this is make to stock situation. and also mentioned that values should match the G\L Account ,ref: fs10n Transaction.
plz help out ......
rewards in advance.
Regards,
Naveen MThe definition of Organization structure might not allow you to do so
Please go throught the following link in detail http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Summary from the above link is as mentioned below
You can plan material requirements at plant level or for different MRP areas. With MRP at plant level, the system adds together stocks from all of the individual storage locations, with the exception of individual customer stock, to determine total plant stock. The requirements are combined in the planning run and procurement elements are created for these pegged requirements with unknown sources. Individual storage locations can be planned separately or be excluded from planning.
In the case of material requirements planning on an MRP area level, only the stocks from the storage locations or subcontractor assigned to the respective MRP area are taken into account. Only the requirements in this MRP area are combined and procurement elements are created for them. This enables you to plan material requirements specifically for certain areas. -
Report for electricity & diesel consumption with values.
Dear All,
My client wants a report which gives date wise details of electricity & diesel consumption in units & liters with it's respective values.
Also this report gives date wise FG (Ice Cream) production in Liters.
Is there any standard report available in sap pm module which gives above details.Also i need following details in the same report which is as follows.
Date wise
Electricity unit. (This is possible thro' measuring point & counter)
Amount
Production in Ltrs.
Unit consumed per Production in Ltr.
Electricity amount in Rs. per Production Ltr.
Boiler Running Hours. (This is possible thro' measuring point & counter)
Boiler Diesel consumption in Ltrs. (This is possible thro' measuring point & counter)
Boiler Diesel consumption in Rs.
Boiler Diesel consumption in Ltrs per Production in Ltr.
Boiler Diesel consumption in Rs. per Production in Ltr.
How i can get this report.
Thanks & Regards,
SandeepHi,
First try to find out where the data you need is captured on the system.
Is there a diesel tank (storage) material documents you can use?
Elec consupmtion? where is that measured? For the whole plant or just that part of the factory?
Production of Ice cream, PP orders backflush quantities?
May be you need to create measurent points for the diesel and elec consumption.
as you find the data, then you can build your report.
There is no standard report, you have to build your own.
Succes
Johan -
BEx analyzer 7.0 Report for last 3 months and current month
I need to create a report for a key figure (net value) and character (material), 0calday
Output format:
column1 : net value - previous year
column2 : net value - current year
column3 : net value - current quarter (separate columns for 3 months)
column4 : net value - previous quarter (separate columns for 3 months)
column5 : net value - current month
column6 : net value - 1st of month to current date (separate columns for each day).
Please help.
Points will be assigned.
Thanks
Mary.Hi
U R infoprovider should have following time characterstics
0FISCAL YEAR, 0FISCAL MONTH/QTR
column1 : net value - previous year
On the basis of user input data derive the year and offset it by - 1 (VYEAR-1)and make a RKF for that .
column2 : net value - current year
On the basis of user input data derive the year(VYEAR) and
make a RKF for that .
column3 : net value - current quarter (separate columns for 3 months)
If QTR is there then derive the QTR on the basis of 0calday/else if month is there then determine month range like 1-3 = Q1 4-6 = Q2 and it will be done in user exit
column4 : net value - previous quarter (separate columns for 3 months)
On the same way as above u can determine the same
column5 : net value - current month
On the basis of 0calday determine CALMONTH and create a RKF for this
column6 : net value - 1st of month to current date (separate columns for each day).
Create a Exit variable type range on CALMONTH for this and
keep the range as 01-current month(which will be derivefrom 0calday)
Thanks,
Debasish -
Accounting entry not posted but MBEW table shows total stock and value
Hi
My R/3 version 4.7
I have a material which is stockable and valuated of material type ERSA(Spare parts)
This material was created in may 2007 and material ledger activated,i dont see master records in accounting view in material price analysis tab for the month may 07 till aug 07,and i see master recordsfor the month sep 07 till jan 08
For this particular material in the report MB51 for all the 3 material documents posted,there are no accounting entries in accounting document.
Also in the report output the field amount in local currency is zero for all the 3 material documents.
1.1st material document with mvt 202 for qty 1 posted in the month of may 07,no entries in acc.doc
In this case,MSEG-DMBTR(amount in local currency) was not updated
Also i dont see master records for this period in accounting view in material price analysis tab,in material master.
2.2nd material document with mvt 261 posted for qty 1 in the month of nov,no entries in acc.doc
In this case,MSEG-DMBTR(amount in local currency)was not updated.
I see master records for this period in accounting view in material price analysis tab with stock 1 qty and value zero
3.3rd material document with mvt 101 posted qty 1 in the month of dec,in this case once GR is done MSEG-DMBTR(amount in local currency) was not updated,but mbew has the entries for stock and value.
Can any one let me know why the system is not updating the mseg-dmbtr and as well affecting MB51 report
Regards
RathaThe settings in Customizing which define that no negative stocks are allowed for the storage type, have only an effect on the transfer orders. In addition, you must also set message L9040 as an error message. For this, call up the Customizing and branch to: 'Logistics Execution -> Warehouse Management -> Interfaces -> Inventory Management -> Allow negative Stocks in Interim Storage Types'. There, execute point 'Control of System Messages in Warehouse Management' and enter message type 'E' for message number L9040
Maybe you are looking for
-
HT1918 How can i change my credit card details on my itunes?
How can i change my credit card detail on Itunes??????????????????????????/
-
Data form taking long time to load
Hi All, My data form is taking a very long time to load. It has period dimension which is having 53 weeks. If I collase Period dimension then the dataform opens up quickly otherwise its taking a very long time (around 7 mins) to open up. What can be
-
Deployed Apps Not Showing in OEM
Hello! Sometimes (this is random) when I deploy an application to OAS 10.1.2.0.2, the app will not show in OEM. It is there and you can access it, but not listed yet in OEM. You have to wait a while (several minutes) for the app to show. Sometimes I
-
Any overhead with sub partitioning within a time based column?
We have a table that's partitioned based on a weekly partition and it has records of Type A and records of Type B and there are processes that are only interested in records of Type B. Right now the table is partitioned as interval on the timestamp c
-
Repeated Opening of database in a Txn causes Logging region out of memory
Hi BDB 4.6.21 When I open and close a single database file repeatedly, it causes the error message "Logging region out of memory; you may need to increase its size". I have set the 65KB default size for set_lg_regionmax. Is there any work around for