FM to create DN from PO assigning batch No.?

I need a FM to convert PO to DN, assigning stock batch no. as well.
Currently using BAPI_OUTB_DELIVERY_CREATE_STO but I can't assign batch no.
thus I can not use this BAPI function.
Can any one help me? thx

I think the scenario your are talking about is Stock Transfer where one plant A create a PO and material delivery is done from the other Plant B (with movement type 641)
When u are doing GR at Plant A then u have to give reference of outbound delivery number only which was created at Plant B.
Please check that you have all required authorizations and also your are selecting the correct Delivery number
Hope this will help you
Enjoyyyyyyyyy
Akshit

Similar Messages

Assign batch number from sale order to production order automatic

Dear all, I have a question for all. Please help me in this case
My scenario is make to order
I have a sale order, when i create sale order, i have assigned batch number at each line item.
When i run MRP for sale order (MD50), the system generate a planned order for it and I've converted to production order.
So when I view production order, I think that batch number what I've assigned to sale order will be assign to production order but that is not happen.
So, can you help me solve this problem. I think that sap can assign batch number from sale order to production order automatic but i don't know how to configure that
Thanks all

Hi,
To the best of my knowledge, when system is generating planned order / production order from sales order system doesnt copy batch number from sales order.
In fact , you are following wrong practice for generating batch no.
Follow procedure like this :
Create sales order without any batch assigning there. Run MRP with MD50 and then convert planned order to Production Order.
While creation / releasing of Production order, you have option to generate batch automatically by following way :
Go to OPKP (Production Scheduling Profile) -> Take your plant & give suitable name to Production scheduling profile-> Batch Management tab -
> Automatic Batch creation in the order maintain this field as
1 Automatic batch creation at order creation
or
2 Autom. batch creation at order release
This will generate batch number automatically at the time of creation or release of order.
Then follow same process i.e. Goods Issue, Confirmation & GR for production order.
So you will get sales order stock in the form of batch managed.
Check & revert if any issue in above flow.
Regards,
Tejas

Batch create snippets from topics?

Hi all, just wondering if its possible to batch create snippets from a heap of topics. I've got a lot of topics that I want to create snippets from for single source purposes and having to add them to the snippet library one by one is becoming teadous. Just wondering if it can be done, evena drag and drop or something would speed things up.....
another quick thing, once I've create these snippets (from topics), the original topic that they were made from is now totally redundant isn't it? meaning I can delete it, I can see any relationship between the 2.
These are only snippets made from an entire topic.

Hi there
I'm unclear on how snippets will help here. Please advise us on exactly how this topic you wish to change to a snippet currently works. Are you inserting it using inline frames or what?
I'm failing to see why you would want to change an entire topic to a snippet.
Indeed if you had the topic content as a snippet you would be able to delete the topic as the data is now inside the snippet.
Snippets are used to insert repetitive text into certain areas of other topics.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Account assignment category in Auto created PO from shipment cost document

Hi
During shipment cost settlement PO generation is mandatory .
In the configuration of Shipment cost item category I have taken Account Assingment Category as K
When PO is created automatically the Acct Assignment Category taken is U which is grayed out .
I want to know why does system propose U in PO
If i want to change the default value proposed by the system in PO from U to M where is the setting done
Can you please suggest a solution
Thanks and Regards
Sunil Iyer

Please read OSS note 506605.
It seems that accout assignment "U" is hard coded in case of PO created from shipment cost document and you can define your own rule via "EXIT_RV54POCR_007".

How to assign batch to BOM line item when creating PO

Hi Experts,
Programmatically i am creating PO using BAPI_PO_CREATE, for the line item material of PO their is BOM, i am able to get the BOM for each material, but struggling to find where can i assign Batch to the BOM line item material.
Thanks in advance
Thanks,
Nitesh

Even though the ORDCHG message contains all three line items, it should also contain qualifiers that tell you Supplier whether the line is new, changed, deleted etc. If your Supplier has SAP, it should just work.
Cheers, Paul.

Can I batch create symbols from layers?

I have Illustrator files of some fairly complicated schematics that I will be bringing in to Flash. The layers are already well organized and named so I would like to select particular layers, hit a "create symbols" button and have all of the selected layers turned into separate symbols that have the same name as their layer name. I would even be willing to code something to do this but I can't find any information about how it can be done.
I know that I can import an Illustrator file into Flash and select layers that I can then make into movie clips but again, I have to manually select the layer, tell it to be a movie clip and then give it an instance name. I would be happy to try to automate that process as well but haven't found any info on how it can be done either.
Does anyone have any ideas on how I can batch create symbols from my existing layers?

I figured this out using recursion. Pasted here in case it helps someone else:
#target Illustrator
var docRef = app.activeDocument;
var layersRef = app.activeDocument.layers;
var layersCount = layersRef.length;
var mySymbolInstance = null;
if ( app.documents.length > 0 ) {
 // if the file is not empty, loop through all levels
 recurseLayers(docRef.layers);
 clearEmptyLayers();
 alert("I'm done");
function recurseLayers(objArray) {
 // loop through main layers
 for (var l = 0; l < objArray.length; l++) {
 // loop through secondary layers
 if (objArray[l].layers.length > 0) {
 recurseLayers(objArray[l].layers);
 // loop through first level groups
 if (objArray[l].groupItems.length > 0) {
 recurseGroups(objArray[l].groupItems);
 // create a group
 var layerGrp = objArray[l].groupItems.add();
 //give new group the same name as the old group
 var layerName = objArray[l].name;
 layerGrp.name = layerName;
 // get all page items from group
 var layerGrpPageItems = objArray[l].pageItems;
 //alert("how many group page items: " + layerGrpPageItems.length);
 for (var li= layerGrpPageItems.length-1; li >0; li--) {
 // will become the symbol name
 var layerPageItemName = layerGrpPageItems[li].name;
 // if it's not already a symbol, make it into one
 if (layerGrpPageItems[li].typename == "SymbolItem") {
 layerGrpPageItems[li].moveToBeginning(layerGrp);
 } else {
 // create symbols
 createSymbol(layerGrpPageItems[li], layerGrpPageItems[li].name);
 // add symbols to group
 mySymbolInstance.moveToBeginning(layerGrp);
 // remove original content
 layerGrpPageItems[li].remove();
 // create symbols from layer
 createSymbol(layerGrp, layerName);
 // remove original layer content
 layerGrp.remove();
function recurseGroups(objArray) {
 for (var g = 0; g < objArray.length; g++) {
 // loop through second level groups
 if (objArray[g].groupItems.length > 0) {
 recurseGroups(objArray[g].groupItems);
 // create a group
 var grp = objArray[g].groupItems.add();
 //give new group the same name as the old group
 var groupName = objArray[g].name;
 grp.name = groupName;
 //alert("which group is this? " + groupName);
 // get all page items from group
 var grpPageItems = objArray[g].pageItems;
 //alert("how many group page items: " + grpPageItems.length);
 for (var gi= grpPageItems.length-1; gi >0; gi--) {
 // will become the symbol name
 var pageItemName = groupName + "_" + grpPageItems[gi].name;
 createSymbol(grpPageItems[gi], pageItemName);
 // add symbols to group
 mySymbolInstance.moveToBeginning(grp);
 // remove original content
 grpPageItems[gi].remove();
function createSymbol(element, elementName) {
 //alert("elementName" + elementName);
 // create symbols from all items in the group
 var symbolRef = docRef.symbols.add(element);
 //alert("element unnamed before: " + elementName);
 // if the element name is empty, give it a name
 var addElementIndex = 0;
 if(elementName == "") {
 elementName = "unnamed" + addElementIndex;
 addElementIndex++;
 // loop through all the symbols in the document
 var symbolCount = docRef.symbols.length;
 for(var s=0; s<symbolCount; s++) {
 // existing symbols
 var symbolCheck = docRef.symbols[s];
 //alert(symbolCheck.name);
 var addIndex = 0;
 // if the name already exists, add the index number to it and increment
 if(elementName == symbolCheck.name) {
 elementName = elementName + addIndex;
 addIndex++;
 symbolRef.name = elementName;
 //alert("symbol name: " + symbolRef.name);
 mySymbolInstance = docRef.symbolItems.add(symbolRef);
 mySymbolInstance.left = element.left;
 mySymbolInstance.top = element.top;
function clearEmptyLayers() {
 if (documents.length > 0 && activeDocument.pathItems.length >= 0){
 for (var ni = layersCount - 1; ni >= 0; ni-- ) {
 // get sub layers
 var topLayer = docRef.layers[ni];
 for(var ii = topLayer.layers.length - 1; ii >=0; ii--) {
 // delete empty sub layers
 if ( topLayer.layers[ni].pageItems.length == 0 ) {
 topLayer.layers[ni].remove();

How to assign Batch jobs ..........

Hi,
I want to know as to how can i assign Batch Jobs to different plants and in by which Tcodes can I see the programs of the Batch jobs.
Thanks

Hi Jyoti
for specfic plant u have to create a variant for batch job.afterwards u have to schedule and release batch job by putting start date for batch job.
You schedule a batch job in SM36 and check whether the job has successfully completed in SM37.
The host or server names that appear when you choose F4 for the target field in SM36 are retrieved from the message service. They can be local or virtual.
Hope ths helps
Please reward points
Sunil

Cannot create iView from PAR file

I am trying to create an iView from PAR file. But when I select the option,
"Portal component - create an iView from a portal component contained in a deployed portal archive (PAR) file"
and click next, I get the following error.
Error______________________________________
Step 1: Portal Archive Selection
No templates to display. You are not assigned to any existing templates.
I have portal_configurator and developer roles assignmed to myself. Which other role do I need? I cannot get admin role.
Note: Other users with admin roles can create iViews.

Hi
What is your portal version details ?
In EP 7.0 you do not have the option -- New From PAR.
So to create IView from Par, you should select the option New --> IView and then there will be an option to select par file.
Otherwise
1.Check if your par file is deployed on server.
2. Check the portalapp.xml, if you have configured your components properly.
Cheers
Chinmaya
reward for helpful answers

PS: WBS is not flowing for a Material, while creating delivery from Project

Hi,
While creating delivery from Project thro CNS0, WBS is not flowing for a Material in delivery, in turn WBS is not flowing in Billing document for same material, in turn not allowing to Post the Billing document to Accounting.
Error while releasing Billing to the Accounting: Accounting Entry is not generated. Error Message:Assign Condition type
YMRG in COPA.
Pls let me know, what can be the reason ?
Thanks.
Amit.

Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul

Error while creating transformation from DSO to InfoCube

Hi Gurus,
When i am creating tranformation from DSO to InfoCube getting an error, " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value
'8.50 ' "
ZAMT_PLC is created with 0CURRENCY.
On checking we found that there is no value stored for Currency field in table level itself. Now in this case how do we avoid this error.
I want to know why is this we need to have value for 0Currency field???
Thanks & Regards,
Anup

Hello Anup,
If you load a key figure which has a unit assigned to it,
then for every records where the key figure has a valid value
(value 0) the corresponding unit has to be delivered as well.
Additionally please check note 1366474 regarding the RSTRAN 312
error message:
"The corrections contained in Note 1165168 are incomplete.
Depending on the sequence during loading, the system may not issue error
message RSTRAN 312 even though data regarding the assigned unit or
currency "space" is incorrect."
This means actually, that the system should have issued the RSTRAN312
error message even before the upgrade, but for some reason this
check found no issues in some constellations. This means furthermore
that your system behaved incorrectly in the past, that this
error message was not triggered if you loaded key figures without
any unit.
I'm sorry to tell you, but the system behaves and works as designed
as it should be even before the correction from note 1366474.
Please change your transformations for key figures which
have a unit assigned, that the unit field is filled correctly.
with the corresponding units, otherwise the system will abort
the processing of the data with the above mentioned error
message.
Best Regards,
Des

Error while creating activities from Account application (Activity tab page

Hi Experts,
We are using CRM 5.0 with PCUI ( EP 7.0 version). We are getting below error when try to create activities from Account application in PCUI ( from activity tab page):
Error : Activity contains error.
Diagnosis
This transaction has errors.
Procedure
To correct the errors, go to the maintenance interface of the transaction.
To navigate to there, use the link to the account application
Pls suggest how to proceed with this error & helpful solutions would be rewrded generously.
Regards,
Basavaraj Patil

Hi Experts,
We are getting this error when try to create Activity from Account application in PCUI. But the same thing is working fine in at GUI level & actions profile assigned to Activity transaction is also working fine at GUI level. But in PCUIit is throwing this below error.
Diagnosis
You have attempted to create a follow-up transaction for an incorrect transction 2000764. This is not possible. You can only create follow-up transactions for error-free transactions.
System Response
The follow-up transaction is not created.
Procedure
Correct the errors in the source transaction 2000764. The error messages resulting from processing the error can be read in the application log in the source transaction.
Pls suggest solution for this.
Thanks in Advance.
Regards,
Basavaraj Patil

Check while creating PR with account assignment K

Hi Gurus,
Can I put a check while creating PRs for account assignment category K, that only statistical order number range is allowed.
In other words, user should not be allowed to put any internal order other than statistical order in PR, while creating it with account assignment category K..
Thanks in Advance,
Vikash

Hi,
You can check on business transaction RMBA - it's the purchase requisition. Set it to prerequisites and for the validation select the order type (it's better than a number range - I believe you use different order types for real/statistical I/O) from AUFK (you will see this structure as available, when creating a validation). If you do use the same order type, then check on I/O itself COBL-AUFNR.
Regards,
Eli

While creating PO using BAPI_PO_CREATE1 vendor batch number is not comming.

Hi Friends,
I am using BAPI "    'BAPI_PO_CREATE1' to create PO in my report.
The PO's are getting created but i the vendor batch number is not found in the PO.
Where as i am passing the vendor batch number.
         bapimepoitem-vendrbatch = '2'.
          bapimepoitemx-vendrbatch = 'X'.
CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      poheader          = bapimepoheader
      poheaderx         = bapimepoheaderx
      memory_uncomplete = 'X'
    IMPORTING
      exppurchaseorder = v_po_number
    TABLES
      return            = bapiret2
      poitem            = bapimepoitem
      poitemx           = bapimepoitemx
      poschedule        = bapimeposchedule
      poschedulex       = bapimeposchedulx.
    Commit the transaction
IF v_po_number NE space.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait   = 'X'
      IMPORTING
        return = bapiret2_c.
ENDIF.
Please reply urgently.
Thanks Regards,
Sandipan Jena

Hi
My answer is pure assumption.
Please check the following OSS notes
Note 758810 - BAPI_PO_CHANGE vendor batch and batch not visible
Note 1230268 - Field Vendor Batch never filled for PO BAPIs
Please take help from BASIS and SAP, before implementing the OSS note
Regards
Madhan D

How to setup Compressor to create video from multiple sequences within FCP?

I am wondering how I can set compressor up to create videos from multiple sequences within FCP. When I click file -> export - > compressor for a sequence and go into the program, it doesn't allow me to go back into FCP. I just get a spinning beach ball. Is there no way to set it up so I can prep a bunch of fcp sequences within compressor and then click submit and walk away? I have over 100 sequences that need to be exported so it would be a little difficult to do this one at a time. Thanks.

Batch processing
*Step one. Make sure everything in every sequence is rendered.*
*Step two. Make a folder somewhere and name it something relevant.*
*Step three. In FCP select all you sequences that you want to compress and right click (option), choose Batch Export from the contextual menu.*
*Step three point one. In the batch export window click on settings and choose the folder you made in step two for the destination. Make sure Make Self-Contained is not check and include Audio and Video.*
*Step four. Click export in the batch window.*
Once that is done you can close FCP.
Now in Compressor
*Step five. Make a setting that will give you the output that you want (mpeg2, AC3, h.264, whatever). Make a destination for where you want to save the output.*
*Step six. Make a droplet from the settings you made in step five.*
You can quit Compressor now.
*Step seven. Take the files that you batch exported from FCP in step three and four and drop them on the droplet you made in step six.*
o| TOnyTOny |o

Workflow - create document from template

Hi,
Could anyone tell me what could be the possible use of Create Document from Template step in workflow...

Hi vijay,
1)Open the PC application by choosing the entry Double-click to create in the Document templates tray by double-clicking or choose in the step definition of the document generation.
The PC application that you last used to create a template is opened in the Workflow Builder. The system fields and the container elements of the workflow container are offered for selection in the navigation area. They can be transferred into the template by double-clicking.
You cannot use any multiline container elements in your template.
All relationships created between container elements/system fields and the document template are displayed in the object area.
It is not possible to insert system fields and container elements into all types of document template.
2) If you want to create a document template of a different class, select Change document class and choose the new type of document template.
3) Select to assign a name for the document template.
4) Create the document template in the usual way in your PC application. You can use all the functions of the PC application.
5) Insert container elements and/or system fields from the object area into your template by double-clicking. These fields are replaced with the content of the container elements/system fields at runtime.
6) Select to save your document template.
Hope this helps u,
Regards,
Nagarajan.

FM to create DN from PO assigning batch No.?

Similar Messages

Maybe you are looking for