FMS edge hybird mode

I need help to setup FMS edge can stream video from a FMS-core (or from other FMS-edge). configuration diagram:
FMLE ==> FMS-core ==> FMS-edge ==> users.
on FMS-edge i have a application on
C:\AMS\applications\myapp
if i did not change anything in Vhost.xml file (path: C:\AMS\conf\_defaultRoot_\_defaultVHost_\Vhost.xml). The myapp application is ok, but can not see the video stream rtmp://FMS-edge/live/livestream.
if i change Vhost file:
<Proxy>
                    <Mode>remote</Mode>
<RouteTable protocol="">
                              <RouteEntry>FMS-edge:1935;FMS-core:1935</RouteEntry>
Then video stream is ok but application don't.
In this case, setup FMS-edge hybird mode. 1 Vhost setup as local mode to serve myapp application, and 1 Vhost setup as remote mode to serve streamming video from FMS-core, right?
Tony

hey one541_,
i believe for you to be gettiing .proxy files you must be having disk caching enabled. These are created to handle process mutex.  These files get removed as soon as fms shuts down. If these are not getting deleted maybe you are not shutting the edge server (in the edge origin configuration) down properly or you are not shutting down at all.

Similar Messages

  • FMS edge segfault

    Just curious does anyone know if there is a relation between FMS edge crashing due to error below in the sample output. Its kind of strange all of a sudden I lose an application and the server starts acting strange. Cannot add new applications and I have to restart.
    I removed the cdrom module to see if that is what is causing FMS to crash with this segfault.
    Using FMS 4.5.0
    Sample dmesg output:
    hda: irq timeout: status=0xd0 { Busy }
    ide: failed opcode was: unknown
    hda: ATAPI reset complete
    fmsedge[4731]: segfault at 0000000000000000 rip 0000000000000000 rsp 0000000043007018 error 14
    ide-cd: cmd 0x1e timed out
    hda: irq timeout: status=0xd0 { Busy }
    ide: failed opcode was: unknown
    hda: ATAPI reset complete
    hda: irq timeout: status=0xd0 { Busy }
    Bashir

    hey one541_,
    i believe for you to be gettiing .proxy files you must be having disk caching enabled. These are created to handle process mutex.  These files get removed as soon as fms shuts down. If these are not getting deleted maybe you are not shutting the edge server (in the edge origin configuration) down properly or you are not shutting down at all.

  • FMS edge server tmp files issue

    I have a few edge servers connecting to an origin server and over time the FMS's tmp directory in the edge server is filled with .proxy files like
    MTA0MDAxMDE2Ng=.proxy
    MTA0MDAxMjg1MQ=.proxy
    MTA0MDU2MzAyOA=.proxy
    MTA0MDYzNDU2MA=.proxy
    MTA0MTE4MjgyNw=.proxy
    MTA0MTM3OTcwNg=.proxy
    MTA0MTM4NjIzNQ=.proxy
    MTA0MTMzNzE2Nw=.proxy
    MTA0MTYxNjUyNQ=.proxy
    Over time this becomes millions of files, which then considerably slows down the system and the performance of FMS. I have to restart FMS and delete all the files in the tmp directory regularly and this makes my cluster very difficult to manage.
    Can anyone help me on how to remove all these files automatically? Or if there is any config that I am missing which might cause this issue?

    hey one541_,
    i believe for you to be gettiing .proxy files you must be having disk caching enabled. These are created to handle process mutex.  These files get removed as soon as fms shuts down. If these are not getting deleted maybe you are not shutting the edge server (in the edge origin configuration) down properly or you are not shutting down at all.

  • Fms edge connected refused with unknown reason.

    i found some error logs in edge.*.log, like this.
    2012-11-14 18:39:04 3903 (e)2661034 Connect failed ( , 1161928336 ) : Connect failed: Connection refused (111) -
    2012-11-14 18:39:46 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
    2012-11-14 18:40:31 3903 (e)2661034 Connect failed ( , 3 ) : Connect failed: Connection refused (111) -
    2012-11-14 19:47:46 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
    2012-11-14 19:48:28 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
    2012-11-14 19:49:10 3903 (e)2661034 Connect failed ( , 1170349712 ) : Connect failed: Connection refused (111)
    it seems because of invalid ports resulst in TCP connection faild.But abvously, these ports are not used in the applications, even some port is out of valid port range. Does anyone konws what the reason.
    btw, there are two adaptors on our machine, one is for intranet, the other is for internet. And the lattter is configured with to IPs
    like this:
    eth0      Link encap:Ethernet  HWaddr 00:21:5E:26:62:28 
              inet addr:*******  Bcast:******* Mask:255.255.255.0
              inet6 addr: fe80::221:5eff:fe26:6228/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:116994653 errors:0 dropped:0 overruns:0 frame:0
              TX packets:151851798 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:52655302829 (49.0 GiB)  TX bytes:124235260628 (115.7 GiB)
              Interrupt:106 Memory:ce000000-ce012800
    eth0:1    Link encap:Ethernet  HWaddr 00:21:5E:26:62:28 
              inet addr:****  Bcast:****  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

    Is there any info in the node manager log files?
    You can try changing the health check timeout.
    # Health Check Interval: Specify the interval (in seconds) between Node Manager health state queries to the Managed Server. Enter a value between 1 and 2147483647 seconds (default is 180 seconds).
    # Health Check Timeout: Enter the number of seconds that Node Manager will await a response to a health state query. If the timeout is reached, Node Manager assumes the Managed Server is "failed", and kills the process. Enter a value between 1 and 2147483647 seconds (default is 60 seconds).

  • GIF won't play in design mode, but previews fine... any ideas?

    My animated gif loops in browser preview, but only plays on the stage when i move it around.  If I leave it selected without moving, it sits there frozen.  Any ideas why my gif won't play properly in design mode?  Thanks!

    Thank you for confirmation that that is how things should work.  I'm new to
    the program and following some Lynda tutorials to get up to speed.  My most
    recent lesson included the gif in exercise files, and everything seems to
    function both in Photoshop and the browser.  Even in edge design mode, if I
    press on the gif and move it around, it plays and loops fine.  But as soon
    as I stop moving the gif, it returns to first frame and stays stuck there.
    Whether selected or not, it just sits there frozen.  If I switch
    applications and come back to edge, I catch a glimpse of other frames, as
    if the gif was playing in the background.  But then it stops again, kind of
    like a watched pot   The behavior seemed glitchy to me, but I thought I
    might be missing a setting somewhere.  I'll try with other gifs, I guess..
    Thanks again!

  • Where to find Drivers and Manual for Edge 15

    I bought a Lenovo Edge 15 Mode: 80H1 from BestBuy.
    Where do I find the drivers, manuals, and other related support docs for this specfic model? When I search for it here, http://support.lenovo.com/us/en, I can't find it.

    Acutally I found it. This model is the Lenovo Edge, which is different from Lenvo Thinkpad Edge.
    However, one Issue is that I can't find the one key recovery botton the laptop.

  • Export data to Excel through a ABAP program run in batch mode

    Dear Experts,
      The requirement is that a ABAP report should run through background job, which will do the followiing :
       1) Collect data from predifined CRM tables ( Activity , Order for example ).
       2) Create a Excel file in a Application Server ( physical file server location ) location.
       3) Push the data collected in the step 1 to the Excel file.
       I have found 2 function modules which does the export to Excel after creating the Excel file. They are :
        a) XXL_FULL_API
        b) MS_EXCEL_OLE_STANDARD_DAT
       But it seems that the ABAP report needs to run in the foreground ( correct me if i am wrong ) in order to create the Excel file.
       Please can anyone suggest a possible ABAP code to achieve OR how to use these FMs in background mode ?
      The excel creation needs to be automated and send to a administrator email id every day, so the need of exporting the data in background mode arises.
    Thanks and regards,
    Sudipta

    hi,
    In SM36, you can create a job(give your report prog name)..
    call the fun. module by storing all the values into final int. table it_data.
    but u need to open one excel file in your desktop...
      v_file = 'C:\file.xls'.  " path should be like this...
    CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename                      = v_file
         filetype                      = 'xls'
      has_field_separator           = 'X'
      HEADER_LENGTH                 = 0
      read_by_line                  = 'X'
      DAT_MODE                      = ' '
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
      VIRUS_SCAN_PROFILE            =
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
        TABLES
          data_tab                      = it_data
    EXCEPTIONS
       file_open_error               = 1
       file_read_error               = 2
       no_batch                      = 3
       gui_refuse_filetransfer       = 4
       invalid_type                  = 5
       no_authority                  = 6
       unknown_error                 = 7
       bad_data_format               = 8
       header_not_allowed            = 9
       separator_not_allowed         = 10
       header_too_long               = 11
       unknown_dp_error              = 12
       access_denied                 = 13
       dp_out_of_memory              = 14
       disk_full                     = 15
       dp_timeout                    = 16
       OTHERS                        = 17
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    regards
    vijay

  • FMS Origin-Only Clustering.

    Hi,
          I was successfully able to setup FMS edge-origin cluster but Origin-only clustering is the one we wanted for our live applications.
    Can someone please provide any material / pointer about setting up Multiple Origin clustering. The only place I found was 'Large Scale Deployment with FMIS'.
        I guess for Origin Only Clustering, we need to have our own caching system. Can someone what does get cached in a Live AV Chat? How do I propagate it to other Origins?
       What kind of plugins would I need for cache managing? What should the plugin do ?
       In the attached Origin Only Architecture,  what does the Primary Origin do and Secondary Origin do ?   I thought Origin is the place where the application is actually running and Edges do proxy. Is it the same here in Origin-only clustering also?
       Are there any tools which can measure the lag in AV ? (like performance measuring tools or load testing tools for FMS).
       What kind of software Load Balancer can we use for FMS clustering? ( like Nginx, Zeus or something ?) ?
       Kindly help on this FMS Origin-only clustering.
    Thanks
    Karthik.

    Hi,
         Thanks for responding,
          I ve setup this way,
                               _____  Origin1  ___  -----------  ( Application runs only here )
                              /              |               \            \
                             `               |               |               \
                        edge1           edge2          edge3     edge4 ....     ( Applications dont run here, they ll route the traffic to Origin1 )
                              |               |                 |            /
                              \               |               ./           /
                                   Load Balancer.    -------------'                    Load balancer sends the traffic to edg1, edg2 and so on.
               ,`````````````````````` /                \
    User1                User2                     User3           .....
    I am using FMIS 4. Our application is Live AV chat.
    For setting up the Origin-Only cluster should we write our our c++ plugin to implement the caching system?? How do I start ?
    Can you please explain a small workflow of the  Origin-Only Clustering please like how does clustering happen and how failovers work and how to use Primary and Secondary Origins and  how Edges, Intermediate nodes work please ?

  • FMS causes error 1009 in OSMF player

    Hi,
    I have written a program to publish the audio and video data to the FMS. I am publishing the video data to FMS in live mode and trying to play back via OSMF player.  When i start publishing video data in the livepkgr application folder of FMS files like .bootstrap, .control, .meta are getting created. But when i try to playback via OSMFplayer i will get error 1009 and one intersting thing what i have observed is after 7 minutes this error won't come and OSMF player starts playing properly. Can you please give the solution for error 1009 which comes only for first 7 minutes?

    Amit,
    I tried to playback my file as you suggested
    1. I tried to playback the file before publishing it. Player gave 2032 errror which was expected.
    2. I started publishing the my file then the player started saying "stream not found null" for 9-10 minutes.
    3. I was still publishing the video content. After 9-10 minutes the player started playing the contet that i was publishing.
    4. Same thing was happening with OSMF player also.
    One more thing is once the player starts playing the video content for a stream name, then the player never gives any error even i stop and start the publishing the video content.
    For Ex: I pubished video with stream name "rtmp_video_1". Above steps 1,2 and 3 happened. Then i stopped publishing. After some 2-3 minutes again i started publishing with same stream name  "rtmp_video_1". The player didn't give any error and started playing immediately.
    What i am thinking is that, FMS is taking some time (9-10 minutes) to make a stream available for video players to play. I have read some where that, when a player requests for a partucular stream with its stream name, the FMS does stream name to index conversion. When this conversion fails its sends error message to the player and player throws the error messages at the user. I don't know what is going wrong. Is something wrong with the way in which  i am publishing the video or something is wrong with the FMS? Please let me know.
    Thanks and Regards,
    Vishwanath

  • Edge server Load balancer

    Can i have an example how edge servers works clustered with load balancer..
    where i should actually run the load balancer..

    Hi,
    Following devnet article has some information regarding using load balencers with FMS edge origin configuration.
    http://www.adobe.com/devnet/flashmediaserver/articles/origin_redundancy.html
    HTH,
    Swathi.

  • FMS Core failure

    Hi,
    I'm suddenly getting loads of "Faulting module FMSCore.exe"
    errors/warnings filling up my App event log. I hope its not
    because, but I'm not ruling it out, of the Security update KB958644
    which was applied the day before.
    Connect and Server Info.
    The Connect version is 6 with SP3, its a basic install (not
    an Edge) with the DB/content on the local disk, the server is a
    fairly decent Dell PowerEdge 1950 (running Win2k3 Enterprise SP2),
    I haven't yet patched it for the Flash Player 10 debacle but aim to
    do it soon.
    The Application error details are:
    Category: (100)
    Event ID: 1000
    Faulting application FMSCore.exe, version 2.0.2.61, faulting
    module FMSCore.exe, version 2.0.2.61, fault address 0x001ca726.
    Then I get a whole host of these Warning messages in the App
    Event log:
    Source: FMS (Edge)
    Category: (264)
    Event ID: 1213
    Connection rejected by server. Reason : [ Server.Reject ] :
    Virtual host _defaultVHost_ is not available.
    Has anyone seen anything similar happen?
    I don't know much about Flash Media Server so any insight
    would be appreciated.
    Thanks,
    Si

    Hi Lauren,
    Actually, when I finally got round to applying the Flash
    Player 10 patch, when the service wasn't busy, all these errors
    suddenly stopped!
    Sorry, I should have closed the topic but thanks for
    replying.
    Thanks again,
    Si

  • FMS 4 configuration / High CPU usage problem

    I am seeing extremly high CPU usage issues with the FMS 4 server.  It seems to be a problem with the FMS Edge process?  If you start and stop the service, the processor goes back to normal operations.
    Looking in the Windows Event logs I am seeing these errors:
    Bad network data; terminating connection : bad chunk version 104 on input stream 00000000077A2E80
    Also:
    Bad network data; terminating connection : (Adaptor: _defaultRoot_, VHost: Unknown, IP: , App: , Protocol: tunnel) : h o s t = % 2 2 % 2 0 % 2 D F O O B A R % 7 C e c h o % 2 0 % 2 2 % 2 0 S h a r e n a m e % 2 2 % 0 A e c h o % 0 A e c h o % 2 0 % 2 2 % 2 0 % 2 0 S o m e S h a r e % 2 0 % 2 0 D i s k % 2 0 % 2 2 % 6 0 i d % 6 0 % 2 0 % 2 3 % 2 2
    Can someone shed some light on what might be causing these issues?
    Running on a virtual server/ Win2k8R2
    Thanks, Tandrist

    Hi
    Can you please provide us some little more environment information on this issue, like:
      - what were you trying to do when you saw this issue, if there was a live telecast or if that was a simple vod workflow?
    - What publisher application were you using to send livestream to FMS?
    -  were you also doing some kind of recording while doing live streaming??
    - In case of live streaming what audio/video encoding and bitrates was there in use?
    - how many number of connections were there?
    - What amount of cpu and mem usage was there (when you say very high cpu usage).. you can see it using task manager
    It will help if you can also share your fms logs (inside fms_install_folder/logs) so that we can see if something abnormal was going on there..

  • Core is no longer active

    Good morning,
    We've been running FMS3 for a while and traffic is
    increasing. For some reason all applications (we have only 2) are
    disappearing and are being reset by the server every 15mn or so.
    In the master logs I am seeing:
    2009-02-18 01:31:51 1312 (i)2581223 Core (7744) is no longer
    active. -
    2009-02-18 01:31:51 1312 (w)2581256 Core (7744)
    _defaultRoot_:::: experienced 1 failure[s]! -
    2009-02-18 01:32:15 1312 (i)2581221 Core (7988) started,
    arguments : -adaptor "_defaultRoot_" -vhost -app -inst -tag -conf
    "D:\Program Files\Adobe\Flash Media Server 3\conf\server.xml" -name
    "_defaultRoot_::::".
    And the event monitor:
    Source: FMS (Edge)
    * Event Log: Application
    * Type: Warning Event
    * Event ID: 1213
    * Connection rejected by server. Reason : [ Server.Reject ] :
    Virtual host is not available.
    Any idea how to investigate and fix that?
    Thanks
    Franck

    Hi,
    I had that same problem today!
    I tried then to update my FMS to v3.5.3. Which did not help
    After a while I recognized, that the problem was on client-side. Inside a module I did a SharedObject.getRemote() with an invalid NetConnection (null, actually).When I executed it, i got an error message which was something like "Cannot create SharedObject" and at the same time, my server crashed with the above mentionned message written to the log.
    However, this only happened when I re-loaded the module. (so, first a [ModuleLoader-instance].load(), then unload() and then load() again, and - voilà - I hab my error).
    Somehow my previously used SharedObject got re-used and made everything crash.
    Hope this is helpful to someone.
    Bye

  • How do I setup a quadrature applicati

    on to reload a zero on the z pulse while counting up AND reload the stripe count of my encoder (i.e 720) while counting down. I understand how the reload mechanism works in one direction but what about bi-directional??? I am using Traditional NI-DAQ & VB6I am monitoring the position of a rotating shaft. The shaft has a quadrature encoder directly connected with 720 pulses per rev. I am using a 6602 board and would like to have a counter count up from 0 to 719 and reset to 0 (on the index pulse) in the positive direction (A leads B) and count down to 0 and reset to 719 in the negative direction (B leads A) direction. The Z index reload feature is specified as a unidirectional feature. What does one do in a bi-firectional sysytem?

    on to reload a zero on the z pulse while counting up AND reload the stripe count of my encoder (i.e 720) while counting down. I understand how the reload mechanism works in one direction but what about bi-directional??? I am using Traditional NI-DAQ & VB6I don't think that sort of behavior is supported in hardware for the 660x series. There's only one reload value which changes the count register without regard to the direction of approach. However, there may be a simple software solution. Let's look at what you have now:
    In the '+' direction, the counter resets to 0, then counts up from 1 to 719 before resetting again. In the '-' direction, the counter resets to 0, then counts down from -1 to -719 before resetting again. You'd like it to count down from 719 to 1 before resetting.
    Well, you could just conditally add 720 to the count whenever count < 0. Or you may prefer to use a remainder function on all the data without any conditional.
    Sound like it could work for you?
    My ow
    n wishlist for hardware-driven reset of the count register is:
    1. I'd like to do it in modes other than position measurement (especially edge counting mode).
    2. I'd like an option like Z index reload phase == 'A any, B any' (meaning, reset the count regardless of whether A & B are high or low)
    3. I'd like to select a RTSI signal or other counter output as the Z-index signal source rather than needing to hardwire it.
    -Kevin P.
    -Kevin P.

  • Gui_download doubt

    Hi Friends,
         i'm try to download internal table values to excel using GUI_DOWNLOAD.
        it's working fine in foreground.
        but i execute the report in back ground. the job was canclled. the err log is " " "ABAP/4 processor: OBJECTS_OBJREF_NOT_ASSIGNED" " ".
    What is the solution.
    Thanks & Regards,
    Vallamuthu.M

    Hello,
    As mentioned in the previous post i DONOT think that it is a limitation of SAP. You cannot use GUI-related FMs in background mode.
    When you execute the report in background you have to write the file into Application server.
    For further info plz search SDN.
    BR,
    Suhas

Maybe you are looking for

  • Error - Creation of Billing Document - Item is not relevant for billing

    Hi While trying to Create a Billing document after entering the Order No.the following error msg shown in the Tool Bar No Billing Documents were generated. See log The Error Log shows the following msg with Yellow coloured indication : 000000xxxxxx 0

  • TCP/IP settings for airport card

    ok, first off...please take it easy on me...i'm a windows guy but am close to purchasing a mac for my girlfriend and also have an iPhone so please understand that i love macs, just don't know too much about them..yet i have a need to set TCP/IP setti

  • GRC 10.0 Database average size

    Hello everybody, A customer has asked me how to size their disks for their new GRC 10.0 Risk Management installation. Installation guides and sizing guidelines provide information for software space occupation, but the size of the database should dep

  • Adding DFF to table as an LOV field

    I am trying to add an LOV field as a new column to a table on an iAssets page. The new LOV field is a DFF. Using personalizations, I try to add an LOV field of messageLovtInput, to the table region of the page but I get a message: Unable to find comp

  • JDBC on AS/400 library-problem

    Hi, does anyone know how I can access libraries on a AS/400 that are not in the userprofile? I've created a JDBC connection here and I can't access some libs with some userprofiles, but only those which are in the default library-list for the user. B