Focus is removed from all cells upon enter press. Advanced datagird

In the advanced datagird when one clicks on a cell and presses enter keyboard button the focus moves to the cell directly the cell bolow. I need to change it so that the focus is removed from all cells upon enter press.

That would work but the other cell would still get focus momentarily, which is not nice for athetics. I need to bypass it entirely.
I've tried to do varius things but I can't event capture the keyUp event:
public function ignoreKey(event:KeyboardEvent):void {
                          event.stopImmediatePropagation();
                          event.preventDefault();
    <mx:AdvancedDataGrid keyUp="ignoreKey(event)"
etc

Similar Messages

  • Numbers removed from all contacts

    I recently installed the 1.1.4 update on my iPhone, and after it was complete, I noticed the numbers and email addresses had been removed from all my contacts. The names and associated pictures are still there, but no numbers.
    I have tried syncing with Outlook in iTunes again, and there is no change. My contacts in Outlook have not changed, they are still correct.
    Is there anything I can do to fix this?

    Folks, I believe I figured out what the problem is. I was able to resolve my problem.
    When you plug in your iphone, select the "Info" tab from the top of the iTunes menu. The problem seems to be with a selection that is probably not seen from this view, since unless you have a gigantic screen, you must scroll down to the option in question. But first be sure you have "Sync address book" contact selected.
    Then scroll down to where it says "Advance" at the very bottom of this page. Select "Replace contacts information on this iPhone". This will ensure that your phone contacts are replaced with what is in your address book. Somehow, this is getting deselected and is not obvious, since it is at the bottom of the screen.
    give it a try.

  • Submit from password item after enter pressed

    My login page allows register new user or sign in for existing user. Hence the Login processes are conditional depending on what is the user doing. In case it is existing user only user name and password are visible. I would like pressing the enter in password film to simulate pressing the Login button. I tried to use "password (submits when entered pressed)" but this submits the page but my processes are not firring since they are conditional on Login button.
    Tomas

    Hi,
    If your password page Item is P101_PASSWORD then hitting enter n the page item sends the request P101_PASSWORD.
    In other words you need to change the condition on your login process to type "Request is contained within Expression1" and then enter the following in Expression 1
    P101_PASSWORD,LOGINThis will fire the process onclicking the Login button as well as when the Enter key is presses in the Password item.
    The Password item must be of type"Password (submits when Enter pressed)".
    Regards,

  • '$GI_HOME/deinstall/deinstall -local' causes removal from all nodes

    Hi all,
    The following is my environment
    Oracle Software: Oracle 11.2.0.1 RAC
    OS Platform: SLES 11.1 x86_64
    # of Nodes: 4
    Use case: Remove single node from cluster
    I successfully removed the RAC database instance and software from one of the nodes, node 4. Now on that same node I'm trying to remove GI following the documented procedure. At the point where I need to run '$GI_HOME/deinstall/deinstall -local' it asks for information on all the other nodes, then when it is running, it prompts for running scripts on the other nodes. These scripts apparently deconfigure CRS which I found out a bit late since I ran it against one of the other nodes!
    So my questions are:
    1. How do I proceed to deinstall CRS on node 4 (node being removed)? It is still at the prompt asking me to press ENTER when all scripts have been run. I tried pressing ENTER a few times and it still asks so it appears to know that the scripts have not been run on the remote nodes??
    2. Has anyone have this happen to them and how do I proceed in future such that this does not happen?
    Thanks,
    Stuart.

    Its because it is still part of cluster.
    Try "http://www.oracledba.org/11g/rac/11g_RAC_Delete_Node.html"

  • Not receiving MouseWheel message because focus is removed from control

    I am trying to implement some mousewheel interaction as can be seen in e.g. Visual Studio. When the mouse is over a control and the mousewheel is scrolled the control under the mousewheel is scrolled instead of the control that has focus. I do this by adding
    a MessageFilter (but also tried a WH_CALLWNDPROC hook) and detecting the WM_MOUSEWHEEL message as it passes and pass it to the control under the mouse cursor. This all works as expected when at least one of the form controls have focus, however sometimes the
    focus is lost fi when a control in a container is disabled and there are no other enabled controls in that container. In that case the WM_MOUSEWHEEL event is never send and it doesn't work anymore.
    To test this behavior I created a test application that contains a message filter and a control that is derived from UserControl. That control contains a button that will have focus. Then the button Click event will disable the button itself. After
    that the focus is lost and WM_MOUSEWHEEL isn't received by my filter anymore.
    So how can I make sure that the WM_MOUSEWHEEL is always send by a) always have a focused control (how do I do this)? b) is there another way to intercept WM_MOUSEWHEEL even when no control is focused?

    I agree with you that is an issue we need to deal with...
    Is this a bug in .NET? Why is the keyboard focus set to a control (as we can use TAB to navigate) but Windows doesn't know it has a focused control?
    ...I added a line inside that method to get the control's parent focused, you could have a try.
    Your idea does work, however this application is just for reproducing the problem. The real application is much more complicated, but I have implemented a workaround. It is something like:
    void UpdateControls()
        var hadFocus = containerControl.ContainsFocus;
        containerControl.Controls.UpdateVisualState();
        if (hadFocus && !containerControl.ContainsFocus)
            containerControl.Focus();
    I think there could be a lot of other situations that could result in a loss of focus. I wouldn't like to write these kind of workarounds for each case. Isn't there a somewhat more robust solution to this problem? How does Visual Studio make sure that there
    is always a control with focus? I mean I don't see any problems occur in the IDE of Visual Studio where the mousewheel isn't working because of focus loss.
    Hello,
    The workaround you shared works and I agree with you that we could be sure that usercontrol could get focus but it seems like that usercontrol doesn't get any focus.
    To confirm whether there is any way to solve this issue and submit this issue to product team, I would recommend you submit a feedback in
    http://connect.microsoft.com. 
    You could share the link of your feedback here that we could help you vote it. I think that Microsoft engineers will evaluate them seriously and provide you better support. In addition, you can post the answer here once the issue is resolved.
    Thanks for your sharing and understanding. 
    Best regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Update from Snow Leopad to Maverick cause email removal from all my IMAP accounts

    Hello, i am using mac Mail.app to manage emails for several accounts. Some using POP some using IMAP. Have been working with same settings for more than 2 years in same system. Last week i got a new macbook pro with maverick on, used migration to transfer files & settings. Everything seemed to worked like a charm, until today that i figured out , all my IMAP accounts have Zero inbox on my machine! My machine is already synced with cloud, that means all emails have been deleted from cloud as well. Nothing left in trash or in any folder.
    All these years i had copies of my emails in Cloud, somehow something has been really wrong.
    Unfortunately i had no backpack, Filevault was disabled and had just bought my new air capsule but havent configured it yet .
    Thanks in advance,
    C
    Already posted in google forums. Link
    What i managed to do so far is to use a software called iSkySoft data recovery. Havent managed to recover yet because it requires registration. Does apple has any solution for

    Found it finally.
    They show up when you select any email account. Select Account Information tab, then use pull down under Outgoing Mail Server (SMTP).
    That pull down also has Edit SMTP server list, where you can remove the un-used SMTP's.

  • FocusLost of jtable is not triggered when focus is lost from a cell editor.

    Hi
    I have a jtable and some columns in the table contains editable cells. I started editing a cell and, before the cell editing is stopped, i clicked another component in the panel using mouse. At that time, the focusLost() method of the table is not triggered. So that the code written in my focusLost() method of table is not working.
    If I add focuslistener to the cell editors, the focusLost() method of this cell editors are triggered at that time.
    Shall I need to add focuslistener to each cell editors used in my jtable ? Anybody know a better solution to handle this problem ?
    Regards
    Anoop

    Add this to your code.
    yourTable.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);

  • Why does Pro CC suddenly remove audio from all imported files regardless of format? Was working perfectly before.

    This problem happened overnight with no changes to settings, etc. I've tried importing every format available and the audio is removed from all. Thanks for any help...

    Okay, then I suspect it's a source patching issue. Make sure that an audio track is selected for source patching.
    You can learn more here: Adobe Premiere Pro Help | Source patching and track targeting
    As to the audio waveform icon, or 'badge,' I'm guessing you have the Project panel in the icon view, in which case the audio badge indicates that the clip has linked audio. I should have been more specific and asked about the icon in the list view. That's where you should see the combo badge for a clip with video and audio.

  • I need help removing hosts from all Active Directory Groups! - PowerShell

    In our environment, we use AD Groups to create collections in Configuration Manager. I have a few PC's that need to be removed from all AD Groups in our Forest. I do not know how many groups these computers are in and to script it in PowerShell. Could
    someone please guide me in the right direction?

    Hi,
    Here's how you can check group membership:
    Get-ADComputer COMPUTERNAME -Properties MemberOf |
    Select -ExpandProperty MemberOf
    http://ss64.com/ps/ad.html
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Delete E-Mail Accounts Without Removing Them from All Computers

    I lost a hard drive on my MacBook Pro and had to re-insall Yosemite and all of my apps and data. I started setting up my e-mail using Apple Mail on my laptop, adding accounts to it. As I added accounts, apparently iCloud decided to add them to my Apple Mail on my work computer, an iMac running Yosemite. I do share my iCloud account between the two machines, but in the past, I didn't share e-mail accounts, except for my .me account and my work e-mail account. Now, I have all of my personal e-mail accounts on my iMac, which I do not want.
    When I go to delete an account in Mail, it shoots me over to the Internet Accounts pane in System Preferences. If I start to delete the account, I get the following message:
    "Do you want to remove the Mail account “[email protected]” from all your computers using iCloud Keychain or turn it off on only this Mac?
    Removing from all computers using iCloud Keychain will remove it from this Mac and “Name of My MacBook Pro”."
    I want to remove the account from my work computer, but I do NOT want it deleted from my MacBook Pro.
    How do I get around this? I'm assuming something is set up in iCloud to cause this and I want it stopped.

     Okay then, you need to make sure that your phone isn't able to delete your emails from the server by accessing your email account settings and looking for the correct setting. As I don't have a CenturyLink email account I'm unable to point you to the correct setting I'm afraid. You might be able to change your email account to an IMAP account which might be a better option for you.
     In the meantime, you can still read your emails on the phone and delete them later using your PC which is how I manage one of my email accounts (POP3). My other IMAP accounts always keep a copy of my mail on the server.
    Ray.

  • Incomplete Approval Work Item Removed from Agent Inbox

    Dear All WF Experts,
    I noticed this strange scenario:
    Let say Agent A and Agent B are sent a work item.
    If Agent A has executed the work item in SBWP previously, the work item is removed from Agent B's inbox (And the status is changed to 'STARTED'). However, the work item is not processed yet.
    Is there anyway to make the work item stays in the inbox until either agent approved the work item?
    Thanks in all advances.
    Regards,
    YL

    Thanks Arghadip for your response. Sorry for my blunt question.
    Actually, the Agent A and Agent B are the approvers for PR approval by position (Agent A and Agent B are the users in the mentioned position).
    Thus, when a PR is raised, both Agent A and Agent B received the same PR work item.
    If Agent A execute the work item but does not release the PR, the work item still remains in Agent A's inbox as there is no terminating event. So, based on the logic, in Agent B's inbox, the work item should still be there because the work item is not fully processed yet (no terminating event takes place).
    But, now, from what I saw, as long as any of the responsible agents executed (started) the work item, even if they do not release it, the work item is removed from all other agents' inbox and only remain in the inbox of the agent who first executed the work item.
    I interpreted this as there is at least one agent already view the work item and know the existence of the PR to be approved, thus the other agents do not need to bother about the PR anymore. But, is my interpretation correct? And is there anyway to make the work item stay in the inbox of all approvers until there is one terminating event?
    Thank you so much.
    Regards,
    YL

  • Namespace prefix for Security elements being removed from SOAP Header

    Hello, I'm seeing a strange problem when accessing a web service using two different Netbeans projects.
    If I use a Netbeans Java Application, add the Web Client Reference , add the web client code, all works fine and the wsse:Security element looks like this:
    <S:Header>
    <ns4:Security xmlns:ns2="IAMP" xmlns:ns3="urn:realops.com:amp:workflow" xmlns:ns4="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
    <ns4:UsernameToken>
    <ns4:Username>admin</ns4:Username>
    <ns4:Password>admin123</ns4:Password>
    </ns4:UsernameToken>
    </ns4:Security>
    However if I do a similar sort of thing but access the web service via a Web Application, the namespace prefix is removed from all child elements wsse:Security like so:
    <S:Header>
    <ns4:Security xmlns:ns2="IAMP" xmlns:ns3="urn:realops.com:amp:workflow" xmlns:ns4="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
    <UsernameToken>
    <Username>admin</Username>
    <Password>admin123</Password>
    </UsernameToken>
    </ns4:Security>
    Which causes an authentication exception.
    The question is, why, when the wsdl are exactly the same for both projects , is the namespace prefix removed from the web app?
    Thanks in advance,
    jsz.

    Hello, I'm seeing a strange problem when accessing a web service using two different Netbeans projects.
    If I use a Netbeans Java Application, add the Web Client Reference , add the web client code, all works fine and the wsse:Security element looks like this:
    <S:Header>
    <ns4:Security xmlns:ns2="IAMP" xmlns:ns3="urn:realops.com:amp:workflow" xmlns:ns4="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
    <ns4:UsernameToken>
    <ns4:Username>admin</ns4:Username>
    <ns4:Password>admin123</ns4:Password>
    </ns4:UsernameToken>
    </ns4:Security>
    However if I do a similar sort of thing but access the web service via a Web Application, the namespace prefix is removed from all child elements wsse:Security like so:
    <S:Header>
    <ns4:Security xmlns:ns2="IAMP" xmlns:ns3="urn:realops.com:amp:workflow" xmlns:ns4="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
    <UsernameToken>
    <Username>admin</Username>
    <Password>admin123</Password>
    </UsernameToken>
    </ns4:Security>
    Which causes an authentication exception.
    The question is, why, when the wsdl are exactly the same for both projects , is the namespace prefix removed from the web app?
    Thanks in advance,
    jsz.

  • Single photo removal from iPad2 files

    How do I remove pictures from files/albumns without removing them from other files or albumns. After copying pictures from "Photos", Last in or dated Events file into a newly developed titled albumn, I've tried to delete the original picture from the above three files. I get a delete message "these photo are used in other locations, do you want the remove from all". I don't but it doesn't give me the option to remove only from these files??? Do I need an APP? I don't see any instructions in manual. Rabbit

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • HT203254 Why Mac Book Pro 17 Inch has been removed from the Apple Stores?

    while surfing the Apple web site, I found that Mac Book Pro 17 Inches has been removed from all the
    stores......is there any fault or some thing wrong has been detected in it?

    I heard a rumor that the 17" machines are all wearing cement shoes and at the bottom of the East River. Some guy named Soprano tipped me off.
    We aren't supposed to talk about it.

  • HT201240 hi all. i just downloaded mountain lion and it seems to have added an old password for admin at the start up, the old password was removed so all i had to do was press enter and off i go, i cant remember it, what to do now??

    hi all. i just downloaded mountain lion and it seems to have added an old password for admin at the start up, the old password was removed so all i had to do was press enter and off i go, i cant remember it, what to do now??

    Eli,
    You can reset a Password (lost/forgotten) set on your Mac using 'Reset Password Utility' available with OS X Utilities tool. With OS X Mountain Lion, OS X Utilities tool can be generally found on a local hidden Recovery HD Partition if your Mac has one.
    To check If your Mac has got a local hidden Recovery HD Partition, start your Mac holding COMMAND + R buttons. If you hold the keys pressed enough and there is a local Recovery HD Partition on your Mac, you will be presented with OS X Utilities window.
    Click the 'Tool' menu item and choose 'Reset password'. Terminal window appears. Type 'resetpassword' into it and press 'Enter'. Reset Password window appears with User Account Names available on your Start-up Volume. Select the User Account Name and rest is simple to follow.
    One of the advantages of this method is that it does not require any Authorization method such as administrative authentication to reset a password.
    NOTE: If your Mac does not have a local hidden Recovery Partition on its system disk, you can create one using Disk Assistant application available from Apple. Search for the Disk Assistant in the support area.

Maybe you are looking for