Folder Restriction Alert

I get this error when downloading no matter what folder I try to download to "Download may fail to foler /Applications due to restrictive acess priileges. Please select a different folder."

The error is indicating that you are choosing the Applications folder or a sub-folder of the Applications folder. If you choose the default location of your User folder do you receive the same error?
Alternately you can follow the steps listed at http://forums.adobe.com/thread/981369 to initiate a direct download.

Similar Messages

Adobe Download Assistant - Folder Restriction Alert

Thanks in advance for the help!
I am getting a headache from the new method of trialing software, that is through the download assistant, as it give me an error everytime I try to download. I am running Windows 7 64-bit, I am downloading CS6 Master Collection and the error is this; "Folder Restriction Alert Download may fail to folder 'C:\Program Files (x86)\Adobe' due to restrictive access privileges. Please select a different folder." This is ridiculous as I have run the download assistant as an admin and would not get this error with a .exe file. I have attempted to do the sam to Program Files as I am 64 bit but I get the same error. I needed this software yesterday so anyhelp would be greatly recieved. thanks so much

Well, you could have some odd group policy in place instated by some security tool/ UAC/ the Windows firewall. turn that stuff off temporarily/ reset the config. Other than that try this:
Direct Download Links for Adobe Software
Mylenium

Restriction alert

When I select a folder to download a CS6 trial version I get Folder Restriction Alert I am on a Mac. I'm looking in the forums but see no answers. Can anybody help? please.

Mylenium is correct we actually specifically added this error message due to users trying to download their installation files into the Applications and Program Files folders.
Pattyooooo please try selecting the default location of your User folder to download the installation files too. Once the download is complete you can then invoke the installer in your User folder to install the software to your Applications folder.

Restrict alerts - ABAP application error

Hi,
I need to restrict alerts getting generated for ABAP application error faults. Is there a way to specify exclude these errors in the alert rules or how can i acheive this.
We are having a fault message form ECC, due to application error in ABAP. We do not want an alert raised for this error.
Thanks for the help,
Vinay.

Hello Vinay,
the alert rules defintion is somewhat limited.
You can only specify "include" rules but no "exclude" rules.
It is not possible to specify: "Sent all Alerts, except ECC Application error"
I already have raised this as development request.
The only alternative is to specify a rule for every alert which you do want to receive and leave out the application error (I know, this is not satisfying)
Hope this was helpful.
best regards,
Markus

Search Document by category and by folder restriction

HI !
I have a problem :
I'm using Search Java API to find "All Documents which have a category and I would like to restrict the search to a subfolder"
So , I found in Javadoc and in IFS Developer reference some piece of code but that doesn't return hits :
AttributeSearchSpecification asp = new AttributeSearchSpecification();
     String [] classNames = new String[] {"Category"};
     SearchClassSpecification scp = new SearchClassSpecification(classNames);
     scp.addResultClass("Category");
     asp.setSearchClassSpecification(scp);
FolderRestrictQualification frq1 = new FolderRestrictQualification();
Folder startFolder = ifsSession.getPrimaryUserProfile().getHomeFolder();
     frq1.setStartFolder(startFolder);
frq1.setMultiLevel(true);
     asp.setSearchQualification(frq1);
     recherche = new Search(ifsSession,asp);
Could you help me please ?
Thank you.

HI !
I have a problem :
I'm using Search Java API to find "All Documents which have a category and I would like to restrict the search to a subfolder"
So , I found in Javadoc and in IFS Developer reference some piece of code but that doesn't return hits :
AttributeSearchSpecification asp = new AttributeSearchSpecification();
     String [] classNames = new String[] {"Category"};
     SearchClassSpecification scp = new SearchClassSpecification(classNames);
     scp.addResultClass("Category");
     asp.setSearchClassSpecification(scp);
FolderRestrictQualification frq1 = new FolderRestrictQualification();
Folder startFolder = ifsSession.getPrimaryUserProfile().getHomeFolder();
     frq1.setStartFolder(startFolder);
frq1.setMultiLevel(true);
     asp.setSearchQualification(frq1);
     recherche = new Search(ifsSession,asp);You'll have to join the document with its category, and add this JoinQualification to the searchqualification..
example:
JoinQualification jq=new JoinQualification();
jq.setLeftAttribute(Document.CLASS_NAME,null);
jq.setRightAttribute(YOUR_CATEGORY_CLASS_NAME,Category.ASSOCIATED_PUBLICOBJECT);
//joining Document.id with its category
then AND-ing JoinQualification with FolderResrictQualification via SearchQualification
last step, inserting the SearchQualification into the AttributeSearchSpecification,
and dont forget to include Document and your_category_class_name in the SearchClassSpecification,
because you seems to forget it?
and ofcourse the resultclass is the Document, not the Category, since you're trying to get document, right?
Hope it helps

Counting files in a folder and showing results in an alert window.

Hello all.
I would like to get the script to count the number of files in a selected folder.
I have a UI where there are browse, ok and cancel buttons.
I wanted the OK button to show the number of jpeg files in the selected folder. If no folder is selected, and the OK button is pressed, it would prompt the user to select a folder before pressing the OK button.
Thanks!

all you need to learn scripting is in the "JavaScript Tools Guide", you're making some progress but reading that and following the samples will make things clear and speed the learning proccess up.
if you look at your code there's only one function, it is called when the Browse button is clicked. See how it is constructed and write another similar function for the Ok button, in there read the contents of the label box and create a folder with that path, then call the function to read the files.
dlg.Panel1.okBtn.onClick = function (){
   selectedFolder = new Folder(decodeURI(dlg.Panel1.Path.text));
   if (selectedFolder.exists)
        doSomething (selectedFolder);
   else
        alert("select a folder first...");
dlg.center(); //center dialog box on screen
dlg.show(); //show dialog box
function doSomething(folder)
        files = folder.getFiles();
        alert(files.length + " Files in selected Folder");
        alert(files);

Restricted access to a folder

Hi, all
I have in Designer Collaboration ( cfolders) one structure of folders similar to the following:
Main Folder
            Public Folder
            Restrict Folder
And this is my problem: I have that in the Public folder is general information in the folder Restrict information is restricted for many users, then I need to give access to the folder Restrict a certain group of users and the Public folder that all users have access
Any idea how I can do this?
Thanks for the help extended

Hi, Thanks for responding
But I have a problem, when it deleted sap_all and sap_new profile in the user USERTEST1 in the backend, in the portal not see any folder.Do not have access to anything.
And we want the user does not have access or not display the folder restricted (e.x: Restrict Folder), but if the other folders created (e.x: Public Folder)
I found in the profile sap_all some authorizations to be concerned cfolders:
Objets                     Text                                                                                 Authorization
CFX_APPL     Application Area in cFolders                                                  &_SAP_ALL
CFX_OBJ                     cFolders Top Level Object                                                        &_SAP_ALL
CFX_USER     cFolders User                                                                  &_SAP_ALL
C_DRAW_DOK     Authorization for document access                                  &_SAP_ALL
S_OC_DOC     SAPoffice: Authorization for an Activity with Documents             &_SAP_ALL
S_OC_FOLCR      SAPoffice: Authorization to Create Shared Folders                  &_SAP_ALL
Thank you for help me
Regards
Danny

How to set up new fax alert?

Is there any way to get an alert when a fax is received? I have set up an Apple script, specifically, a faxes folder alert using the "new items alert script" from the sample scripts, but it doesn't seem to do anything when a fax arrives and the pdf file ends up in the faxes folder.
So, for now, I have to manually check the Faxes folder periodically to see if one has come in. Also, when I send a fax using the print pdf as fax method, it works, but there is no saved record of the fax.
Do I have to buy a third party fax program to accomplish these things? If so, can anyone recommend something basic and cheap?
Thanks.

"You can have it email you. What kind of alert were you looking for?"
Well, I got the Fax Alert, really a folder change alert, to work--a popup window that says I have a new file in the faxes folder--but apparently the "folder change alert" only works if you set it up for the folder in question each time you start or reboot the computer. There's no permanent or automatic folder alert, apparently.
As for the email notification, yes, I have it set up that way, but it doesn't work because my SMTP server, whether Comcast or Earthlink or any other dynamic IP provider, rejects emails sent from an unrecognized IP (from my computer). The ISP /can/ set things up so that it will permit these to go through, but not on a residential account with a dynamic IP address. I would have to get a business, fixed IP at significantly more cost.
I do wonder whether the Apple server would somehow allow this, but haven't been able to get it to work.

Folder Size Notifier

Hi
I am after a method, applescript or otherwise that will monitor the size of a specfic folder and alert me when it becomes a certain size, any ideas?
Cheers
Rob

I found the solution on another thread.
Thread: https://discussions.apple.com/message/15667362#15667362
You need to go to 'System Preferences, General, Sidebar Icon Size'
-http://screencast.com/t/Iibc8***
Thanks for your reply and for trying to help. I appreciate it.
Cheers,
Dan

Alerts: background job scheduling

Hi
i have defined alerts, and gave "no restriction " alert rule in runtime workbench. my doubt is whether can we define background jobs for the alerts. if so how it will be possible and how it will impact the performance of the XI server??
how can we find out which background jobs are assibned for the alerts.
please help me

Hi,
No need to schedule back ground jobs if your are on PI....i.e version 7.0
if you are on XI 3.0...based on the SP you need to schedule the report for generating the alerts....
HTH
Rajesh

Deleting movie files in iMovie Sharing - iTunes -folder

When I share a project to iTunes a movie file is created not only in Music>iTunes>iTunes Music>Movies but also in Movies>iMovie Sharing>iTunes. If I then delete a project, no movie file is deleted. In iTunes I can delete a movie file. But then the movie file in iMovie Sharing>iTunes still exists. Is it ok just to manually (using Finder) delete the movie files in iMovie Sharing>iTunes I don't need any more or is there a logic behind this behaviour I don't understand.

This is because with iTunes you have the option of copying files into the iTunes library, or leaving them where they are. iMovie doesn't have anyway to know which option you're using. All iMovie does is create the file in the "iMovie Sharing" folder then alert iTunes to import it.
Once the import is done, if you have iTunes copying content into the library, you are free to delete them from the sharing folder since they are duplicates.
BTW: You will still have yet another copy contained within the project itself which is used for iLife sharing. Sharing one movie for example, in three sizes, actually puts 9 copies of the movie on your hard drive! Three copies for each of the three sizes. It can add up quickly.

Folder action not working

I can't figure out why the following folder action script does not work. I get the alert message but when I choose 'yes' the file is not copied...am I missing something?
Thanks.
Pedro
property dialog_timeout : 30 -- set the amount of time before dialogs auto-answer.
on adding folder items to this_folder after receiving added_items
    try
        tell application "Finder"
            --get the name of the folder
            set the folder_name to the name of this_folder
        end tell
        -- find out how many new items have been placed in the folder
        set the item_count to the number of items in the added_items
        --create the alert string
        set alert_message to ("Folder Actions Alert:" & return & return) as Unicode text
        if the item_count is greater than 1 then
            set alert_message to alert_message & (the item_count as text) & " new items have "
        else
            set alert_message to alert_message & "One new item has "
        end if
        set alert_message to alert_message & "been placed in folder " & «data utxt201C» & the folder_name & «data utxt201D» & "."
        set the alert_message to (the alert_message & return & return & "Would you like to view the added items?")
        display dialog the alert_message buttons {"Yes", "No"} default button 2 with icon 1 giving up after dialog_timeout
        set the user_choice to the button returned of the result
        if user_choice is "Yes" then
            tell application "Finder"
                activate
                set copyFolder to "Photo [Data]:10 Multimedia:CompAlerts:"
                set copyitem to file "MacOS:Users:Peter:Documents:CompAlert.rtf"
                duplicate file copyitem to copyFolder with replacing--THIS DOES NOT EXECUTE
                --go to the desktop
                --open the folder
                --open this_folder
                --select the items
                --reveal the added_items
            end tell
        end if
    end try
end adding folder items to

The only standout is the line:
                duplicate file copyitem to copyFolder with replacing--THIS DOES NOT EXECUTE
where:
                set copyFolder to "Photo [Data]:10 Multimedia:CompAlerts:"
In other words, copyFolder is a string. You're trying to duplicate a file to a string? Doesn't seem viable to me.
Maybe you mean:
                duplicate copyitem to folder copyFolder with replacing
In other words, identify the destination as a folder rather than a string.
If that doesn't work, remove the try/end try statements. This will let the script report any errors, rather than failing gracefully. try/end try is useful for production but supresses error messages, which makes troubleshooting harder.

SBO Mailer, message fails to be sent

Hi,
I try to send invoices via SBO Mailer... the message appears in my SENT ITEMS (in Messages/alerts overview), but with a red X, meaning that there is an error while trying to send the message. When I try to send messages without attachments, it works.
How can I know what is the error ? I can see AOB1.Confirmed2 = 'E', but is there a field or another table where I can see the source of the error ?
Is there a timeout that can be configured within SBO Mailer ? Our customer has a slow internet connection, but when trying to send those invoices (in PDF) via Outlook, it works... so how can I know what's wrong with the mails containing attachments ?
thanks,
Luce

Hi Luce,
As note [693306|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=693306] mentions:
Error 35 - this error occurs when trying to send an e-mail with an attachment, that cannot be created or accessed via the Attachments path as defined in SAP Business One. It is necessary to verify that there are no folder restrictions on the Attachments folder. It is also necessary to verify that the created attachment has a valid name. In case the operating system does not support the specific language used in SAP Business One, the Service Manager will not recognize the created file. In NT 4.0 Servers, try running the SBO Mailer under an Administrator account, instead of under a Local service account.
Regards
Mario

Property dialog timeout syntax

This should be an easy one for you guys. I am not literate enough to know off hand. I want to edit my default folder script which alerts me on the file dropped to my faxes folder. What do I set the "property dialog_timeout: x) to if I want to loop indefinitely to await my response. It is currently 300 (not sure if this means seconds) but I would like the alert to stay on so If I am away and return I know there is activity. To save space I wont include the basic script as it's a standard default choice in the OS. If you want me to add the script or if you want to recommend an alternative, feel free. This seemed the easiest route to accomplish the task.
Thanks in advance for your help.
Regards,
Craig

Ahhhh thanks. I guess I can just remove that line without any problems? (Anyway, was that syntax for seconds or minutes in that script) here is the script.
add - new item alert
This Folder Action handler is triggered whenever items are added to the attached folder.
The script will display an alert containing the number of items added and offering the user
the option to reveal the added items in Finder.
Copyright © 2002–2007 Apple Inc.
You may incorporate this Apple sample code into your program(s) without
restriction. This Apple sample code has been provided "AS IS" and the
responsibility for its operation is yours. You are not permitted to
redistribute this Apple sample code as "Apple sample code" after having
made changes. If you're going to redistribute the code, we require
that you make it clear that the code was descended from Apple sample
code, but that you've made changes.
property dialog_timeout : 300 -- set the amount of time before dialogs auto-answer.
on adding folder items to this_folder after receiving added_items
try
tell application "Finder"
--get the name of the folder
set the folder_name to the name of this_folder
end tell
-- find out how many new items have been placed in the folder
set the item_count to the number of items in the added_items
--create the alert string
set alert_message to ("Folder Actions Alert:" & return & return) as Unicode text
if the item_count is greater than 1 then
set alert_message to alert_message & (the item_count as text) & " new items have "
else
set alert_message to alert_message & "One new item has "
end if
set alert_message to alert_message & "been placed in folder " & «data utxt201C» & the folder_name & «data utxt201D» & "."
set the alert_message to (the alert_message & return & return & "Would you like to view the added items?")
display dialog the alert_message buttons {"Yes", "No"} default button 2 with icon 1 giving up after dialog_timeout
set the user_choice to the button returned of the result
if user_choice is "Yes" then
tell application "Finder"
--go to the desktop
activate
--open the folder
open this_folder
--select the items
reveal the added_items
end tell
end if
end try
end adding folder items to

Applescript: Copy File Names into an Email

*I've been slowly teaching myself Applescript, and can't seem to find a way to do a few things. Basically what I'm trying to do is set up a script that will run when items are dropped into a folder on my FTP. I want the script to have a pop-up dialogue, and generate an email to certain users announcing new files are on the FTP. I have these 2 parts down, but I would also like the body of the email to include a list of the filenames. This part I can't figure out.*
*I just need to find a function that will copy the filenames of new items, and paste them into the body of the email already being generated. My current code is below. Anyone have any ideas to help me expand?*
property dialog_timeout : 15 -- set the amount of time before dialogs auto-answer.
on adding folder items to this_folder after receiving added_items
try
tell application "Mail"
set theMessage to make new outgoing message with properties {visible:true, subject:"New Files on FTP", content:"New files have been posted to incoming folder of the FTP."}
tell theMessage
make new to recipient at end of to recipients with properties {name:"Jane Doe", address:"[email protected]"}
make new to recipient at end of to recipients with properties {name:"John Smith", address:"[email protected]"}
end tell
send theMessage
end tell
tell application "Finder"
--get the name of the folder
set the folder_name to the name of this_folder
end tell
-- find out how many new items have been placed in the folder
set the item_count to the number of items in the added_items
--create the alert string
set alert_message to ("Folder Actions Alert:" & return & return) as Unicode text
if the item_count is greater than 1 then
set alert_message to alert_message & (the item_count as text) & " new items have "
else
set alert_message to alert_message & "One new item has "
end if
set alert_message to alert_message & "been placed in folder " & «data utxt201C» & the folder_name & «data utxt201D» & "."
set the alert_message to (the alert_message & return & return & "Would you like to view the added items?")
display dialog the alert_message buttons {"Yes", "No"} default button 2 with icon 1 giving up after dialog_timeout
set the user_choice to the button returned of the result
if user_choice is "Yes" then
tell application "Finder"
--go to the desktop
activate
--open the folder
open this_folder
--select the items
reveal the added_items
end tell
end if
end try
end adding folder items to
Message was edited by: markeze

AppleScript forum under OS X Technologies.

Folder Restriction Alert

Similar Messages

Maybe you are looking for